PVA/ChCl Deep Eutectic Polymer Blends for Transparent Strain Sensors with Antifreeze, Flexible, and Recyclable Properties

Acryloyl chitosan as a macro-crosslinker for freezing-resistant, self-healing and self-adhesive ionogels-based multicompetent flexible sensors

Here, a polysaccharide derivative acryloyl chitosan (AcCS) is exploited as macro-crosslinker to synthesize a novel ionogel poly (acrylic acid-co-1-Vinyl-3-butyl imidazolium chloride) (AA-IL/AcCS) via a one-pot method. AcCS provides abundant physical and chemical crosslinking sites contributing to the high mechanical stretchability (elongation at break 600 %) and strength (tensile strength 137 kPa) of AA-IL/AcCS. The high-density of dynamic bonds (hydrogen bonds and electrostatic interactions) in the network of ionogels enables self-healing and self-adhesive features of AA-IL/AcCS. Meanwhile, AA-IL/AcCS exhibits high ionic conductivity (0.1 mS/cm) at room temperature and excellent antifreeze ability (-58 °C). The AA-IL/AcCS-based sensor shows diverse sensory capabilities towards temperature and humidity, moreover, it could precisely detect human motions and handwritings signals. Furthermore, AA-IL/AcCS exhibits excellent bactericidal properties against both gram-positive and gram-negative bacteria. This work opens the possibility of polysaccharides as a macro-crosslinkers for preparing ionogel-based sensors for wearable electronics.

Phase-Segregated Ductile Eutectogels with Ultrahigh Modulus and Toughness for Antidamaging Fabric Perception

Ionogels are extremely soft ionic materials that can undergo large deformation while maintaining their structural and functional integrity. Ductile ionogels can absorb energy and resist fracture under external load, making them an ideal candidate for wearable electronics, soft robotics, and protective gear. However, developing high-modulus ionogels with extreme toughness remains challenging. Here, a facile one-step photopolymerization approach to construct an acrylic acid (AA)-2-hydroxyethylacrylate (HEA)-choline chloride (ChCl) eutectogel (AHCE) with ultrahigh modulus and toughness is reported. With rich hydrogen bonding crosslinks and phase segregation, this gel has a 99.1 MPa Young's modulus and a 70.6 MJ m-3 toughness along with 511.4% elongation, which can lift 12 000 times its weight. These features provide extreme damage resistance and electrical healing ability, offering it a protective and strain-sensitive coating to innovate anticutting fabric with motion detection for human healthcare. The work provides an effective strategy to construct robust ionogel materials and smart wearable electronics for intelligent life.

One-step Fabrication of Physical Eutectogel with Recyclability: Crystalline Domain Regulation Induced by Microgels

HYPOTHESIS

Despite their non-volatility, low cost, and recyclability, physical eutectogels' appeal is hindered by the intricate fabrication process and the involvement of hazardous chemicals. The network of polyvinyl alcohol (PVA) in deep eutectic solvent (choline chloride and glycerol) might be developed by the addition of microgels of polyacrylic acid (Carbopol).

EXPERIMENTS

Hydrogen-bond interactions between Carbopol and PVA are revealed through Fourier-transform infrared spectroscopy. The impact of microgels on crystalline domains and the polymer network can be observed using X-ray diffraction and scanning electron microscopy. The physical properties of the eutectogel, including mechanical strength and ionic conductivity, are investigated as well. Finally, the strain-sensing ability and remarkable recyclability of the eutectogel are demonstrated.

FINDINGS

The physical eutectogel can be obtained through a one-step fabrication process using only green and low-cost materials. It demonstrates robust strength (1.02 MPa) and remarkable stretchability (1000 % strain). This is attributed to the uniform dispersion of PVA crystalline domains within the deep eutectic solvent, facilitated by the hydrogen bonds and space restriction effects between PVA and Carbopol. Furthermore, the physical eutectogel with recyclability can consistently generate electrical resistance signals, highlighting its potential as a reliable strain sensor.

Competitive proton-trapping strategy enhanced anti-freezing organohydrogel fibers for high-strain-sensitivity wearable sensors

Stretchable organohydrogel fibers are attracting considerable interest for next-generation flexible and wearable soft strain sensors due to their excellent stability in harsh environments. However, due to the uniformly distributed ions and reduced number of carriers in the whole material, the sensitivity of organohydrogel fibers under subzero temperature is not desirable, which significantly hinders their practical application. Herein, a newly competitive proton-trapping strategy was designed to obtain anti-freezing organohydrogel fibers for high-performance wearable strain sensors via a simple freezing-thawing process, in which tetraaniline (TANI), serving as the proton trapper, and representing the shortest repeated structural unit of polyaniline (PANI), was physically crosslinked with polyvinyl alcohol (PVA) (PTOH). The as-prepared PTOH fiber exhibited an outstanding sensing performance at -40 °C due to the unevenly distributed ion carriers and the highly breakable proton-migration pathways, with a high gauge factor of 24.6 at a strain of 200-300%. Moreover, the existence of hydrogen bonds between the TANI and PVA chains endowed PTOH with a high tensile strength (1.96 MPa) and toughness (8.0 MJ m-3). Accordingly, strain sensors made from PTOH fibers and knitted textiles could monitor human motions rapidly and sensitively, demonstrating their potential as wearable anti-freezing anisotropic strain sensors.