Dual-Function Detoxifying Nanofabrics against Nerve Agent and Blistering Agent Simulants

Permeable Self-Association of Metal-Organic Framework 808/Ag-Based Fiber Membrane for Broad-Spectrum and Highly Efficient Degradation of Biological and Chemical War Agents

The threat posed by biological and chemical warfare agents (BCWA) to national security, the environment, and personal health underscores the need for innovative chemical protective clothing. To address the limitations of conventional activated carbon materials, which are prone to falling off and adsorption saturation, an efficient self-association approach was introduced. In this study, we proposed the immobilization of metal-organic framework (MOF) 808 and Ag nanoparticles onto a polypropylene (PP) fiber membrane using a rapid self-association method facilitated by chitosan (CS). The MOF 808/Ag-based (PP-CS/808-Ag) fiber membrane demonstrated exceptional degradation efficiency, achieving a remarkable rate of t1/2 within 2 h for the mustard simulant 2-chloroethyl ethyl sulfide (2-CEES) and a rate of t1/2 = 4.12 min for the G-series simulant dimethyl 4-nitrophenylphosphate (DMNP). A theoretical computational model was developed to determine the overall reaction mechanism, and it was verified that MOF 808 and Ag nanoparticles were mainly involved in the hydrolysis process against 2-CEES and DMNP. The PP-CS/808-Ag composite fiber film was prepared as the core layer, and the fracture strength, bending resistance, and moisture permeability were better than those specified by many countries for biochemical protective clothing, showing that it has a broad application prospect in developing a generation of broad-spectrum bioprotective clothing.

Ultraviolet Light-Assisted Decontamination of Chemical Warfare Agent Simulant 2-Chloroethyl Phenyl Sulfide on Metal-Loaded TiO2/Ti Surfaces

The application of ultraviolet (UV) light for the decontamination of chemical warfare agents (CWAs) has gained recognition as an effective method, especially for treating hard-to-reach areas where wet chemical methods are impractical. In this study, TiO2/Ti was employed as a model catalyst, which was contaminated with 2-chloroethyl phenyl sulfide (CEPS), and subjected to photocatalytic decontamination using both UVB and UVC light. Additionally, photocatalytic decontamination efficiency by introducing Au, Pt, and Cu onto the TiO2/Ti surface was explored. During the photodecomposition process under UVC light, at least eight distinct secondary byproducts were identified. It was observed that the introduction of overlayer metals did not significantly enhance the photodecomposition under UVC light instead overlaid Au exhibited substantially improved activity under UVB light. Whereas, photodecomposition process under UVB light, only five secondary products were detected, including novel compounds with sulfoxide and sulfone functional groups. This novel study offers valuable insights into the generation of secondary products and sheds light on the roles of overlayer metals and photon wavelength in the photodecontamination process of CWA.

Research Progress in the Degradation of Chemical Warfare Agent Simulants Using Metal-Organic Frameworks

Chemical warfare agents primarily comprise organophosphorus nerve agents, saliva alkaloids, cyanides, and mustard gas. Exposure to these agents can result in severe respiratory effects, including spasms, edema, and increased secretions leading to breathing difficulties and suffocation. Protecting public safety and national security from such threats has become an urgent priority. Porous metal-organic framework (MOF) materials have emerged as promising candidates for the degradation of chemical warfare agents due to their large surface area, tunable pore size distribution, and excellent catalytic performance. Furthermore, combining MOFs with polymers can enhance their elasticity and processability and improve their degradation performance. In this review, we summarize the literature of the past five years on MOF-based composite materials and their effectiveness in degrading chemical warfare agents. Moreover, we discuss key factors influencing their degradation efficiency, such as MOF structure, pore size, and functionalization strategies. Furthermore, we highlight recent developments in the design of MOF-polymer composites, which offer enhanced degradation performance and stability for practical applications in CWA degradation. These composite materials exhibit good performance in degrading chemical warfare agents, playing a crucial role in protecting public safety and maintaining national security. We can expect to see more breakthroughs in the application of metal-organic framework porous materials for degrading chemical warfare agents. It is hoped that these innovative materials will play a positive role in achieving social stability and security.

A Drop-and-Drain Method for Convenient and Efficient Fabrication of MOF/Fiber Composites

The fabrication of flexible composites by integrating metal-organic frameworks (MOFs) with flexible substrates is a critical strategy for developing advanced materials with excellent feasibility and processability. These flexible MOF-based composites play a particularly important role in the separation and purification processes. However, several drawbacks remain challenge to overcome such as long processing time, high-cost, complicated processes, or harsh reaction conditions. In this paper, a convenient and efficient method is reported for fabricating MOF/fiber composites using a simple drop-and-drain (D&D) process. By exploiting the electrostatic interactions between the positively charged MOF particles and negatively charged fiber-based flexible substrates, a uniform coating of MOF on flexible fibers are achieved. This is accomplished by allowing the MOF ink to drop and drain through a substrate using a custom-made Teflon cell. Additionally, the D&D method enables the production of multiple layers of composites in a single-step process. UiO-66 and ZIF-8 submicroparticles and various substrates such as cotton-pad, cotton-fabric, nylon-fabric, PET-fabric, and filter-paper are employed to create flexible MOF/fiber composites. These composites demonstrate outstanding capacities for capturing negatively charged organic dyes, including methyl orange and indigo carmine. Furthermore, the MOF/fiber composites can be reused for dye capture after a simple washing process.

Boosted ability of ZIF-8 for early-stage adsorption and degradation of chemical warfare agent simulants

Efficient adsorption of hazardous substances from the environment is crucial owing to the considerable risks they pose to both humans and ecosystems. Consequently, the development of porous materials with strong adsorption capabilities for hazardous substances, such as chemical warfare agents (CWAs), is pivotal for safeguarding human lives. Specifically, the early-stage adsorption proficiency of the adsorbents plays a vital role in determining their effectiveness as ideal adsorbents. Herein, we report the efficient adsorption of CWA simulants using thermally treated ZIF-8 (T-ZIF-8). The T-ZIF-8 samples were prepared by subjecting ZIF-8 to a simple thermal treatment, which resulted in a more positive surface charge with extra open metal sites. Although the pore volume of T-ZIF-8 decreased after thermal treatment, the positive surface charge of T-ZIF-8 proved advantageous for the adsorption of the CWA simulants. As a result, the adsorption capacity of T-ZIF-8 for the CWA simulants improved compared to that of pure ZIF-8. Notably, T-ZIF-8 exhibited a remarkably enhanced adsorption ability in the early stage of exposure to the CWA simulants, possibly due to the effective polar interactions between T-ZIF-8 and the simulants via the electron-rich components within the CWA simulants. Moreover, the enhanced adsorption capacity of T-ZIF-8 led to the fast degradation of simulant compared to pure ZIF-8. T-ZIF-8 also demonstrated excellent stability over three adsorption cycles. These findings highlight that T-ZIF-8 is an outstanding material for the early-stage adsorption and degradation of CWA simulants, offering high effectiveness and stability.

Advances in Metal-Organic Frameworks for the Removal of Chemical Warfare Agents: Insights into Hydrolysis and Oxidation Reaction Mechanisms

The destruction of chemical warfare agents (CWAs) is a crucial area of research due to the ongoing evolution of toxic chemicals. Metal-organic frameworks (MOFs), a class of porous crystalline solids, have emerged as promising materials for this purpose. Their remarkable porosity and large surface areas enable superior adsorption, reactivity, and catalytic abilities, making them ideal for capturing and decomposing target species. Moreover, the tunable networks of MOFs allow customization of their chemical functionalities, making them practicable in personal protective equipment and adjustable to dynamic environments. This review paper focuses on experimental and computational studies investigating the removal of CWAs by MOFs, specifically emphasizing the removal of nerve agents (GB, GD, and VX) via hydrolysis and sulfur mustard (HD) via selective photooxidation. Among the different MOFs, zirconium-based MOFs exhibit extraordinary structural stability and reusability, rendering them the most promising materials for the hydrolytic and photooxidative degradation of CWAs. Accordingly, this work primarily concentrates on exploring the intrinsic catalytic reaction mechanisms in Zr-MOFs through first-principles approximations, as well as the design of efficient degradation strategies in the aqueous and solid phases through the establishment of Zr-MOF structure-property relationships. Recent progress in the tuning and functionalization of MOFs is also examined, aiming to enhance practical CWA removal under realistic battlefield conditions. By providing a comprehensive overview of experimental findings and computational insights, this review paper contributes to the advancement of MOF-based strategies for the destruction of CWAs and highlights the potential of these materials to address the challenges associated with chemical warfare.

Self-Assembled MOF-on-MOF Nanofabrics for Synergistic Detoxification of Chemical Warfare Agent Simulants

The development of protective fabrics that are capable of capturing and detoxifying a wide range of lethal chemical warfare agents (CWAs) in an efficient way is of great importance for individual protection gears/clothing. In this work, unique metal-organic framework (MOF)-on-MOF nanofabrics were fabricated through facile self-assembly of UiO-66-NH₂ and MIL-101(Cr) crystals on electrospun polyacrylonitrile (PAN) nanofabrics and exhibited intriguing synergistic effects between the MOF composites on the detoxification of both nerve agent and blistering agent simulants. MIL-101(Cr), although not catalytic, facilitates the enrichment of CWA simulants from solution or air, thereby delivering a high concentration of reactants to catalytic UiO-66-NH₂ coated on its surface and providing an enlarged contact area for CWA simulants with the Zr₆ nodes and aminocarboxylate linkers compared to solid substrates. Consequently, the as-prepared MOF-on-MOF nanofabrics showed a fast hydrolysis rate (t_1/2 = 2.8 min) for dimethyl 4-nitrophenylphosphate (DMNP) in alkaline solutions and a high removal rate (90% within 4 h) of 2-(ethylthio)-chloroethane (CEES) under environmental conditions, considerably surpassing their single-MOF counterparts and the mixture of two MOF nanofabrics. This work demonstrates synergistic detoxification of CWA simulants using MOF-on-MOF composites for the first time and has the potential to be extended to other MOF/MOF pairs, which provides new ideas for the development of highly efficient toxic gas-protective materials.

Ratiometric fluorescent detection of exosomal piRNA-823 based on Au NCs/UiO-66-NH2 and target-triggered rolling circle amplification

piR-823 is a newly discovered colorectal cancer marker with high diagnostic efficacy. However, the current quantification methods have complicated operations and high cost, which restrict its clinical application. Herein, a metal-organic framework (MOF) with a UiO-66 prototype structure which supports gold nanoclusters (Au NCs), Au NCs/UiO-66-NH₂, were prepared as a model nanobiosensing platform for ratiometric detection of exosomal piR-823. The rolling circle amplification process provides high sensitivity and the ratiometric detection process ensures good accuracy of the sensor. Such biosensor showed a wide linear range of 0.04-4 pM, and a low detection limit of 10.2 fM towards piR-823. In addition, piR-823 can be used as an effective supplement to carcinoembryonic antigen (CEA) in clinical diagnosis of colorectal cancer. This study not only provides a potentially valuable ratio fluorescence platform involving enzyme catalytic reaction, but also offers a design blueprint for further expansion of nanotechnology in the diverse biological analysis.