Chemically Welding Silver Nanowires toward Transferable and Flexible Transparent Electrodes in Heaters and Double-Sided Perovskite Solar Cells

A two-step junction welding technique for achieving high-performance broadband silver nanowire transparent conductive films

Transparent conductive films (TCFs) are critical components of various optoelectronic and photovoltaic devices. The performance of TCFs is mainly ascribed to their superior transparency and low sheet resistance. However, the welding strategy for silver nanowires (AgNWs), the primary material used in TCFs, can significantly affect the optical and electrical properties of the films. Herein, we report a simple and effective method for preparing AgNWs TCFs with superior broadband transparency and conductivity. By applying pressure to the surface of graphene, we successfully enhanced the tight connections between loose nanowires. Based on this, we developed a high-performance, wide-spectrum TCF and employed ultraviolet welding as its post-treatment method. The sheet resistance of the electrode decreased to 27.1 Ω sq-1 with the addition of graphene films, and subsequent UV light welding further reduced the resistance value by 25.1%. Moreover, the incorporation of graphene films provides excellent protection for AgNWs against oxidation. One month later, compared to AgNWs without a protective coating, the increase in sheet resistance was reduced by 414.6%. This study provides a new method for preparing TCFs with wide spectrum and high performance.

Nanosilica-Reinforced Poly(dimethylsiloxane) Stretchable Transparent Electrodes and Multifunctional Applications

Soft and stretchable transparent electrodes still face many challenges, requiring a balance between stretchability, conductivity, transparency, and stability. In this paper, poly(dimethylsiloxane) (PDMS) elastomer is selected, and amphoteric nonionic surfactants (Triton X-100) are introduced to improve the interfacial bonding between nanosilica (SiO2) and the elastic matrix. At the same time, a fluorosilane-modified glass template is used to induce nanosilica enrichment on the membrane surface. Based on the dual effects of nanoenhancement and surface regulation, a PDMS transparent nanocomposite membrane with good stretchability, surface hydrophilicity, and easy in situ polymerization of polydopamine can be obtained. Silver nanowires (AgNWs) and poly(3,4-ethylenedioxythiophene)/polystyrenesulfonate (PEDOT:PSS) conductive polymers can be assembled layer by layer on the surface of the nanocomposite membrane by simple spin coating and heat treatment. The transmittance of the soft and stretchable composite membrane can reach 63% in the visible light range, and the strength and elongation at break increase to 2.30 MPa and 150%, respectively. The sheet resistance of the stretchable transparent dry electrode is as low as about 6 Ω/sq. After being placed in the air for 3 months, the resistance increment is less than 5%, showing good environmental stability. The stretchable transparent electrode prepared based on the material-structure-preparation integrated method has brilliant application potential in wearable thermal management, electrochromism, strain sensing, and electromagnetic shielding.

One-Step Synthesis of Graphene-Covered Silver Nanowires with Enhanced Stability for Heating and Strain Sensing

Solution-processed silver nanowire (AgNW) networks have been considered as promising electrode candidates for next-generation electronic devices. However, they suffer from poor thermal and electrical stability and low mechanical properties, hindering their practical applications. In this work, graphene nanosheets are successfully introduced into AgNW via a facile one-step solvothermal process. Benefiting from increased conductive paths, the resultant AgNW/graphene films exhibit high electrical conductivity. More importantly, the interlocking NW morphology can be maintained under high temperature and applied voltage due to suppressed Ag migration, which is enabled by the introduction of graphene. This feature leads to enhanced thermal and electrical stability, making them suitable for use as transparent heaters. Furthermore, the composite films present excellent mechanical performance, and negligible resistance change is observed after 10 000 repeated bending cycles. To demonstrate their feasibility toward sensor applications, sandwiched strain sensors are designed, which can endure larger tensile strains and show higher sensitivity and repeatability compared with pure AgNW-based device. Furthermore, various hand gestures can be easily recognized by the resultant sensors based on unique combinations of sensing response. This work not only provides a low-cost method to realize large-scale synthesis of AgNW/graphene composites but also offers guidance to prepare high-performance electrodes for advanced electronics.

Capillary Force-Induced Graphene Spontaneous Transfer and Encapsulation of Silver Nanowires for Highly-Stable Transparent Electrodes

Silver nanowires (NWs) (AgNWs) have emerged as the most promising conductive materials in flexible optoelectronic devices owing to their excellent photoelectric properties and mechanical flexibility. It is widely acknowledged that the practical application of AgNW networks faces challenges, such as high surface roughness, poor substrate adhesion, and limited stability. Encapsulating AgNW networks with graphene has been recognized as a viable strategy to tackle these issues. However, conventional methods like self-assembly reduction-oxidation or chemical vapor deposition often yield graphene protective layers with inherent defects. Here, we propose a novel one-step hot-pressing method containing ethanol solution that combines the spontaneous transfer and encapsulation process of rGO films onto the surface of the AgNWs network, enabling the preparation of flexible rGO/AgNWs/PET (reduced graphene oxide/silver NWs/polyethylene terephthalate) electrodes. The composite electrode exhibits outstanding photoelectric properties (T ≈ 88%, R ≈ 6 Ω sq-1) and possesses a smooth surface, primarily attributed to the capillary force generated by ethanol evaporation, ensuring the integrity of the rGO delamination process on the original substrate. The capillary force simultaneously promotes the tight encapsulation of rGO and AgNWs, as well as the welding of the AgNWs junction, thereby enhancing the mechanical stability (20,000 bending cycles and 100 cycles of taping tests), thermal stability (∼30 °C and ∼25% humidity for 150 days), and environmental adaptability (100 days of chemical attack) of the electrode. The electrode's practical feasibility has been validated by its exceptional flexibility and cycle stability (95 and 98% retention after 5000 bending cycles and 12,000 s long-term cycles) in flexible electrochromic devices.

Highly Stable Silver Nanowire Plasmonic Electrodes for Flexible Polymer Light-Emitting Devices

Silver nanowire (AgNW) transparent electrodes are considered as a promising candidate for applications in flexible optoelectronic devices. However, it remains a great challenge to obtain flexible AgNW electrodes with excellent optoelectrical properties and mechanical flexibility. Here, highly stable Ag nanoparticle (AgNP)-enhanced plasmonic AgNW electrodes are demonstrated via the controllable in situ growth of AgNPs at the AgNW junctions and introduction of an l-histidine (l-His) wrapping layer. The flexible transparent electrodes of AgNW-AgNP/l-His possess a low sheet resistance (Rsh) of ∼17.5 Ω sq-1, a high transmittance of ∼92.5% (550 nm), and a robust mechanical stability (100,000 bending cycles). Benefiting from plasmon-coupling effects, flexible polymer light-emitting devices (FPLEDs) with AgNW-AgNP/l-His electrodes present a current efficiency (CE) of ∼14.8 cd A-1 and an external quantum efficiency (EQE) of ∼5.6%, constituting ∼80% and ∼75% increases compared to those of the reference devices with AgNW electrodes, respectively. Additionally, the laminated flexible transparent PLEDs (FT-PLEDs) are demonstrated by integrating polydimethylsiloxane/AgNW-AgNP anodes by a soft lamination process. The FT-PLEDs present a CE of ∼7.1 cd A-1 (cathode side: ∼3.9 cd A-1; anode side: ∼3.2 cd A-1) and an EQE of ∼2.7% (cathode side: ∼1.5%; anode side: ∼1.2%). Furthermore, the FPLEDs and FT-PLEDs exhibit robust mechanical durability, maintaining ∼89% and ∼86% of their initial luminance after 1000 bending cycles at a bending radius of 2 mm, respectively. This work opens up a new avenue for the development of high performance and stable flexible optoelectronic devices.

Mechanical Durability and Flexibility in Perovskite Photovoltaics: Advancements and Applications

The remarkable progress in perovskite solar cell (PSC) technology has witnessed a remarkable leap in efficiency within the past decade. As this technology continues to mature, flexible PSCs (F-PSCs) are emerging as pivotal components for a wide array of applications, spanning from powering portable electronics and wearable devices to integrating seamlessly into electronic textiles and large-scale industrial roofing. F-PSCs characterized by their lightweight, mechanical flexibility, and adaptability for cost-effective roll-to-roll manufacturing, hold immense commercial potential. However, the persistent concerns regarding the overall stability and mechanical robustness of these devices loom large. This comprehensive review delves into recent strides made in enhancing the mechanical stability of F-PSCs. It covers a spectrum of crucial aspects, encompassing perovskite material optimization, precise crystal grain regulation, film quality enhancement, strategic interface engineering, innovational developed flexible transparent electrodes, judicious substrate selection, and the integration of various functional layers. By collating and analyzing these dedicated research endeavors, this review illuminates the current landscape of progress in addressing the challenges surrounding mechanical stability. Furthermore, it provides valuable insights into the persistent obstacles and bottlenecks that demand attention and innovative solutions in the field of F-PSCs.

Polysaccharide hydrogel containing silver nanoparticle@catechol microspheres with photothermal, antibacterial and anti-inflammatory activities for infected-wounds repair

Anti-infection hydrogels have recently aroused enormous attraction, particularly in the treatment of chronic wounds. Herein, silver nanoparticle@catechol formaldehyde resin microspheres (Ag@CFRs) were fabricated by one-step hydrothermal method and subsequently encapsulated in hydrogels which were developed by Schiff base reaction between aldehyde groups in oxidized hyaluronic acid and amino groups in carboxymethyl chitosan. The developed polysaccharide hydrogel exhibited microporous structure, high swelling capacity, favorable mechanical strength, enhanced tissue adhesion and photothermal activities. Additionally, the hydrogel not only ensured long-term and high-efficiency antibacterial performance (99.9 %) toward E. coli and S. aureus, but also realized superior cytocompatibility in vitro. Moreover, based on the triple antibacterial strategies endowed by chitosan, silver nanoparticles and the photothermal properties of catechol microspheres, the composite hydrogel exhibited excellent anti-infection function, significantly downregulated inflammatory factors (TNF-α and IL-1β) and promoted in vivo infected-wound healing. These results demonstrated that the polysaccharide hydrogel containing Ag@CFRs has great potential for infected-wounds repair.

Metallic Micro-Nano Network-Based Soft Transparent Electrodes: Materials, Processes, and Applications

Soft transparent electrodes (TEs) have received tremendous interest from academia and industry due to the rapid development of lightweight, transparent soft electronics. Metallic micro-nano networks (MMNNs) are a class of promising soft TEs that exhibit excellent optical and electrical properties, including low sheet resistance and high optical transmittance, as well as superior mechanical properties such as softness, robustness, and desirable stability. They are genuinely interesting alternatives to conventional conductive metal oxides, which are expensive to fabricate and have limited flexibility on soft surfaces. This review summarizes state-of-the-art research developments in MMNN-based soft TEs in terms of performance specifications, fabrication methods, and application areas. The review describes the implementation of MMNN-based soft TEs in optoelectronics, bioelectronics, tactile sensors, energy storage devices, and other applications. Finally, it presents a perspective on the technical difficulties and potential future possibilities for MMNN-based TE development.

Solvent Welding-Based Methods Gently and Effectively Enhance the Conductivity of a Silver Nanowire Network

To enhance the conductivity of a silver nanowire (Ag NW) network, a facile solvent welding method was developed. Soaking a Ag NW network in ethylene glycol (EG) or alcohol for less than 15 min decreased the resistance about 70%. Further combined solvent processing via a plasmonic welding approach decreased the resistance about 85%. This was achieved by simply exposing the EG-soaked Ag NW network to a low-power blue light (60 mW/cm2). Research results suggest that poly(vinylpyrrolidone) (PVP) dissolution by solvent brings nanowires into closer contact, and this reduced gap distance between nanowires enhances the plasmonic welding effect, hence further decreasing resistance. Aside from this dual combination of methods, a triple combination with Joule heating welding induced by applying a current to the Ag NW network decreased the resistance about 96%. Although conductivity was significantly enhanced, our results showed that the melting at Ag NW junctions was relatively negligible, which indicates that the enhancement in conductivity could be attributed to the removal of PVP layers. Moreover, the approaches were quite gentle so any potential damage to Ag NWs or polymer substrates by overheating (e.g., excessive Joule heating) was avoided entirely, making the approaches suitable for application in devices using heat-sensitive materials.

Flexible Transparent Conductive Electrodes: Unveiling Growth Mechanisms, Material Dimensions, Fabrication Methods, and Design Strategies

Flexible transparent conductive electrodes (FTCEs) constitute an indispensable component in state-of-the-art electronic devices, such as wearable flexible sensors, flexible displays, artificial skin, and biomedical devices, etc. This review paper offers a comprehensive overview of the fabrication techniques, growth modes, material dimensions, design, and their impacts on FTCEs fabrication. The growth modes, such as the "Stranski-Krastanov growth," "Frank-van der Merwe growth," and "Volmer-Weber growth" modes provide flexibility in fabricating FTCEs. Application of different materials including 0D, 1D, 2D, polymer composites, conductive oxides, and hybrid materials in FTCE fabrication, emphasizing their suitability in flexible devices are discussed. This review also delves into the design strategies of FTCEs, including microgrids, nanotroughs, nanomesh, nanowires network, and "kirigami"-inspired patterns, etc. The pros and cons associated with these materials and designs are also addressed appropriately. Considerations such as trade-offs between electrical conductivity and optical transparency or "figure of merit (FoM)," "strain engineering," "work function," and "haze" are also discussed briefly. Finally, this review outlines the challenges and opportunities in the current and future development of FTCEs for flexible electronics, including the improved trade-offs between optoelectronic parameters, novel materials development, mechanical stability, reproducibility, scalability, and durability enhancement, safety, biocompatibility, etc.

Developing a Simple, Effective, and Quick Process to Make Silver Nanowires with a High Aspect Ratio

A growing number of people are interested in using silver nanowires (AgNWs) as potential transparent and conductive materials. The production of high-performance and high-throughput AgNWs was successfully optimized in this work using a one-step, straightforward, and reproducible modified polyol approach. The factors influencing the morphology of the silver nanowires have undergone extensive research in order to determine the best-optimized approach for producing AgNWs. The best AgNW morphology, with a length of more than 50 m and a diameter of less than 35 nm (aspect ratio is higher than 1700), was discovered to be produced by a mixture of 44 mM AgNO3, 134 mM polyvinylpyrrolidone (PVP) (Mo.Wt 40,000), and 2.4 mM KCl at 160 °C with a stirring rate of 100 rpm. With our improved approach, the overall reaction time was cut from almost an hour with the conventional polyol method to a few minutes. Scanning electron microscopy (SEM), X-ray diffraction (XRD), and ultraviolet (UV) spectroscopy were used to characterize AgNWs. The resultant AgNWs' dispersion was cleaned using a centrifuge multiple times before being deposited on glass and PET substrates at room temperature. In comparison to commercial, delicate, and pricey indium-doped tin oxide (ITO) substrates, the coated samples displayed exceptionally good sheet resistance of 17.05/sq and optical haze lower than 2.5%. Conclusions: Using a simple one-step modified polyol approach, we were able to produce reproducible thin sheets of AgNWs that made excellent, flexible transparent electrodes.