Air-Stable Flexible Photodetector Based on MXene-Cs3Bi2I9 Microplate Schottky Junctions for Weak-Light Detection

Highly Efficient Flexible Photodetectors Based on Pb-Free CsBi3I10 Perovskites

Perovskites have made remarkable advancements in optoelectronics owing to their high light absorption coefficient, tunable bandgap, and long charge diffusion. Nonetheless, the practical applications of Pb-based perovskites have been hindered by the instability and toxicity of Pb, especially in flexible electronics, which require high biosecurity and low toxicity. Hence, the development of stable Pb-free perovskite materials has gained increasing attention. In this study, we synthesized stable CsBi3I10 Pb-free perovskites outside the glovebox and improved the optoelectronic and mechanical performances of the CsBi3I10-based flexible devices through polyvinylcarbazole (PVK) doping. Flexible photodetectors with the device structure of PET/ITO/PEDOT:PSS/CsBi3I10:PVK/Au was fabricated. The results indicated that the introduction of poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) reduced the surface roughness of the flexible PET substrate, while PVK doping further improved the surface smoothness of CsBi3I10 thin films, thereby enhancing the interfacial charge transportation. Moreover, PEDOT:PSS and PVK acted as stepwise hole transport layers in the photodetectors. The device demonstrated a maximum responsivity of 0.3 A/W, detectivity of 2.6 × 1011 Jones, and a response time of 102 μs at 650 nm. After subjecting it to 1000 bending tests, the light current retained 80% of its initial value. This study presents a universally applicable method for controlling the surface morphology of a flexible perovskite thin film.

A polarization-sensitive, high on/off ratio and self-powered photodetector based on Nb2CTxand Nd2CTx@MoS2

MXene two-dimensional materials have been widely used in energy storage, catalysis, sensing and other fields, Nb2C as a typical two-dimensional MXene material, its exploration in the field of optoelectronics is still in its infancy, especially Nb2C-based photodetectors are still to be developed. This paper demonstrates that two-dimensional films based on few-layer Nb2C have a photoelectric response in the wavelength range from visible to near-infrared. We have found that the light response performance can be easily adjusted by controlling the thickness of the spin-coated film, and that Nb2C photodetectors show great advantages in terms of wide bandwidth, polarization response, high switching ratio, etc. By adjusting the material concentration and sample thickness, the photocurrent can reach up to 330 nA, the switching ratio can reach 410, and the responsivity can reach 8.3 × 10-4A W-1. In the polarization characteristic test, an extinction ratio of 7.6 can be obtained. By adjusting the content of that doped MoS2quantum dot, the dark current can reach 7.6 × 10-13A, and the switching ratio can reach 3 × 105, which can be increased by 700 times. The above results show that the few-layer Nb2C nanosheets can be used as optoelectronic detectors in the visible to near-infrared bands, which further broadens the application prospects of two-dimensional MXene.

Emerging Computational Micro-Spectrometers - From Complex System Integration to Simple In Situ Modulation

The extensive applications of spectrum analysis across various fields have rendered the traditional desktop spectrometers unable to meet the market demand for portability and instantaneity. Reducing the size of spectrometers has become a topic of interest. Based on this trend, a novel type of computational spectrometer is developed and has been widely studied owing to its unique features. Such spectrometers do not need to integrate complex mechanical or optical structures, and most of them can achieve spectrum analysis by the properties of the material itself combines with the reconstruction algorithm. Impressively, a single-detector computational spectrometer has recently been successfully realized based on in situ modulation of material properties. This not only enables the further miniaturization of the device, but also means that the footprint-resolution limitation which has always existed in the field of hyperspectral imaging has been broken, opening a new era of image analysis. This review summarizes the classifications and principles of various spectrometers, compares the spectrum resolution performances of different types of spectrometers, and highlights the progress of computational spectrometers, especially the revolutionary single-detector spectrometer. It is expected that this review will provide a positive impact on expanding the boundary of spectrum analysis and move hyperspectral imaging forward.