Metal-Organic-Framework-Derived 3D Hierarchical Matrixes for High-Performance Flexible Li-S Batteries

Integrating CoP/Co heterojunction into nitrogen-doped carbon polyhedrons as electrocatalysts to promote polysulfides conversion in lithium-sulfur batteries

Lithium-sulfur (Li-S) batteries have garnered extensive research interest as one of the most promising energy storage devices due to their ultra-high theoretical energy density. However, the sluggish reaction kinetics, abominable shuttling effect and inferior cycling stability severely restrict its practical application. Herein, a multifunctional CoP/Co@NC/CNT heterostructure host material was elaborately designed and synthesized by integrating CoP/Co heterojunction, N-doped carbon hollow polyhedrons (NC) and carbon nanotubes (CNTs). Specifically, the CoP/Co heterojunction can reconfigure the local electronic structure, resulting in a synergistic effect that enhances adsorption capacity and catalytic activity compared to CoP and Co alone. Furthermore, the CNTs-grafted NC not only provides multi-dimensional pathways for rapid electron transport and ion diffusion, but also physically restricts the diffusion of polysulfides during charge-discharge processes. Owing to these advantages, the battery assembled with the CoP/Co@NC/CNT/S cathode yields an impressive discharge specific capacity of 1479.9 mAh g-1 at 0.1C, and excellent capacity retention of 793.7 mAh g-1 over 500 cycles at 2C (∼85.5 % of initial capacity). The rational integration of multifunctional heterostructures could provide an effective strategy for designing high-efficiency nanocomposite electrocatalysts to promote sulfur redox kinetics in Li-S batteries.

Selective Reduction of Multivariate Metal-Organic Frameworks for Advanced Electrocatalytic Cathodes in High Areal Capacity and Long-Life Lithium-Sulfur Batteries

Lithium-sulfur batteries hold great promise as next-generation high-energy-density batteries. However, their performance has been limited by the low cycling stability and sulfur utilization. Herein, we demonstrate that a selective reduction of the multivariate metal-organic framework, MTV-MOF-74 (Co, Ni, Fe), transforms the framework into a porous carbon decorated with bimetallic CoNi alloy and Fe3O4 nanoparticles capable of entrapping soluble lithium polysulfides while synergistically facilitating their rapid conversion into Li2S. Electrochemical studies on coin cells containing 89 wt % sulfur loading revealed a reversible capacity of 1439.8 mA h g-1 at 0.05 C and prolonged cycling stability for 1000 cycles at 1 C/1060.2 mA h g-1 with a decay rate of 0.018% per cycle. At a high areal sulfur loading of 6.9 mg cm-2 and lean electrolyte/sulfur ratio (4.5 μL:1.0 mg), the battery based on the 89S@CoNiFe3O4/PC cathode provides a high areal capacity of 6.7 mA h cm-2. The battery exhibits an outstanding power density of 849 W kg-1 at 5 C and delivers a specific energy of 216 W h kg-1 at 2 C, corresponding to a specific power of 433 W kg-1. Density functional theory shows that the observed results are due to the strong interaction between the CoNi alloy and Fe3O4, facilitated by charge transfer between the polysulfides and the substrate.

A review of metal-organic framework (MOF) materials as an effective photocatalyst for degradation of organic pollutants

Water plays a vital role in all aspects of life. Recently, water pollution has increased exponentially due to various organic and inorganic pollutants. Organic pollutants are hard to degrade; therefore, cost-effective and sustainable approaches are needed to degrade these pollutants. Organic dyes are the major source of organic pollutants from coloring industries. The photoactive metal-organic frameworks (MOFs) offer an ultimate strategy for constructing photocatalysts to degrade pollutants present in wastewater. Therefore, tuning the metal ions/clusters and organic ligands for the better photocatalytic activity of MOFs is a tremendous approach for wastewater treatment. This review comprehensively reports various MOFs and their composites, especially POM-based MOF composites, for the enhanced photocatalytic degradation of organic pollutants in the aqueous phase. A brief discussion on various theoretical aspects such as density functional theory (DFT) and machine learning (ML) related to MOF and MOF composite-based photocatalysts has been presented. Thus, this article may eventually pave the way for applying different structural features to modulate novel porous materials for enhanced photodegradation properties toward organic pollutants.

Engineering Strategies for Suppressing the Shuttle Effect in Lithium-Sulfur Batteries

Lithium-sulfur (Li-S) batteries are supposed to be one of the most potential next-generation batteries owing to their high theoretical capacity and low cost. Nevertheless, the shuttle effect of firm multi-step two-electron reaction between sulfur and lithium in liquid electrolyte makes the capacity much smaller than the theoretical value. Many methods were proposed for inhibiting the shuttle effect of polysulfide, improving corresponding redox kinetics and enhancing the integral performance of Li-S batteries. Here, we will comprehensively and systematically summarize the strategies for inhibiting the shuttle effect from all components of Li-S batteries. First, the electrochemical principles/mechanism and origin of the shuttle effect are described in detail. Moreover, the efficient strategies, including boosting the sulfur conversion rate of sulfur, confining sulfur or lithium polysulfides (LPS) within cathode host, confining LPS in the shield layer, and preventing LPS from contacting the anode, will be discussed to suppress the shuttle effect. Then, recent advances in inhibition of shuttle effect in cathode, electrolyte, separator, and anode with the aforementioned strategies have been summarized to direct the further design of efficient materials for Li-S batteries. Finally, we present prospects for inhibition of the LPS shuttle and potential development directions in Li-S batteries.

A mini review on metal-organic framework-based electrode materials for capacitive deionization

Capacitive deionization (CDI) is an electrochemical method of extracting ions from solution at potentials below electrolysis. It has various applications ranging from water remediation and desalination to heavy metal removal and selective resource recovery. A CDI device applies an electrical charge across two porous electrodes to attract and remove ions without producing waste products. It is generally considered environmentally friendly and promising for sustainability, yet ion removal efficiency still falls short of more established filtration methods. Commercially available activated carbon is typically used for CDI, and its ion adsorption capacity is low at approximately 20-30 mg g-1. Recently, much interest has been in the highly porous and well-structured family of materials known as metal-organic frameworks (MOFs). Most MOFs are poor conductors of electricity and cannot be directly used to make electrodes. A common workaround is to pyrolyze the MOF to convert its organic components to carbon while maintaining its underlying microstructure. However, most MOF-derived materials only retain partial microstructure after pyrolysis and cannot inherit the robust porosity of the parent MOFs. This review provides a systematic breakdown of structure-performance relationships between a MOF-derived material and its CDI performance based on recent works. This review also serves as a starting point for researchers interested in developing MOF-derived materials for CDI applications.

Modulating Charge Transfer Pathways to Enhance Photocatalytic Performance of the Metal-Organic Layer Nanosheet

Two-dimensional metal-organic layer (MOL) nanosheets, as nonhomogeneous catalysts, show better optical activity in the field of photocatalysis due to their unique structural advantages. Current research focuses on how to modify the structure of 2D nanosheets by means of crystal engineering to modulate the intralayer electron transfer pathway and systematically investigate the impacts of size effect and electron transfer pathway on the energy utilization efficiency of crystalline materials. In the present work, a triple lophine-derived ligand was designed and prepared, which exhibits a large π-conjugation system and multiple D-A (D: donor, A: acceptor) electron transfer pathways. 2D MOL constructed with Cd ions can be exfoliated by physical sonication to obtain double-walled 2D MOL nanosheets. Compared with the bulk crystalline material, the 2D nanosheets exhibit better photovoltaic properties. Benefiting from the excellent structural advantages, 2D MOL nanosheets could be used as photocatalysts for a variety of aerobic oxidation reactions under mild conditions (10 W white LED, room temperature), such as the trifluoromethylation of coumarins, the synthesis of benzimidazole derivatives from aromatic diamines and aromatic aldehydes, and the preparation of 2,4,6-triarylpyridine derivatives, all with high conversion rates and selectivity (yield typically greater than 88%). The related results illustrate that the introduction of the photoactive triple-lophine unit into 2D MOL nanosheets can effectively modulate the electron transport mode and enhance energy utilization, which provides a new research idea for the development of nonhomogeneous photocatalysts aimed at the applications of visible light-driven organic conversion.

Dynamic Metal Nanoclusters: A Review on Accurate Crystal Structures

Dynamic metal nanoclusters have garnered widespread attention due to their unique properties and potential applications in various fields. Researchers have been dedicated to developing new synthesis methods and strategies to control the morphologies, compositions, and structures of metal nanoclusters. Through optimized synthesis methods, it is possible to prepare clusters with precise sizes and shapes, providing a solid foundation for subsequent research. Accurate determination of their crystal structures is crucial for understanding their behavior and designing custom functional materials. Dynamic metal nanoclusters also demonstrate potential applications in catalysis and optoelectronics. By manipulating the sizes, compositions, and surface structures of the clusters, efficient catalysts and optoelectronic materials can be designed and synthesized for various chemical reactions and energy conversion processes. This review summarizes the research progress in the synthesis methods, crystal structure characterization, and potential applications of dynamic metal nanoclusters. Various nanoclusters composed of different metal elements are introduced, and their potential applications in catalysis, optics, electronics, and energy storage are discussed. Additionally, the important role of dynamic metal nanoclusters in materials science and nanotechnology is explored, along with an overview of the future directions and challenges in this field.