Role of Efficient Charge Transfer at the Interface between Mixed-Phase Copper-Cuprous Oxide and Conducting Polymer Nanostructures for Photocatalytic Water Splitting

H-Glass Supported Hybrid Gold Nano-Islands for Visible-Light-Driven Hydrogen Evolution

Flat panel reactors, coated with photocatalytic materials, offer a sustainable approach for the commercial production of hydrogen (H2) with zero carbon footprint. Despite this, achieving high solar-to-hydrogen (STH) conversion efficiency with these reactors is still a significant challenge due to the low utilization efficiency of solar light and rapid charge recombination. Herein, hybrid gold nano-islands (HGNIs) are developed on transparent glass support to improve the STH efficiency. Plasmonic HGNIs are grown on an in-house developed active glass sheet composed of sodium aluminum phosphosilicate oxide glass (H-glass) using the thermal dewetting method at 550 °C under an ambient atmosphere. HGNIs with various oxidation states (Au0, Au+, and Au-) and multiple interfaces are obtained due to the diffusion of the elements from the glass structure, which also facilitates the lifetime of the hot electron to be ≈2.94 ps. H-glass-supported HGNIs demonstrate significant STH conversion efficiency of 0.6%, without any sacrificial agents, via water dissociation. This study unveils the specific role of H-glass-supported HGNIs in facilitating light-driven chemical conversions, offering new avenues for the development of high-performance photocatalysts in various chemical conversion reactions for large-scale commercial applications.

Superhydrophilic Photothermal-Responsive CuO@MXene Nanofibrous Membrane with Inherent Biofouling Resistance for Treating Complex Oily Wastewater

MXene, a recently emerged 2D material, has garnered substantial attention for a myriad of applications. Despite the growing interest, there remains a noticeable gap in exploring MXene-based membranes for the simultaneous achievement of photomodulated oil/water separation, bacterial resistance, and the removal of pollutants in the treatment of oily wastewater. In this work, we have successfully synthesized a novel multifunctional CuO@MXene-PAN nanofibrous membrane (NFM) featuring unique nanograin-like structures. Benefitting from these unique structures, the resultant membrane shows excellent superwetting properties, significantly enhancing its performance in oil/water separation. In addition, the membrane's photothermal property boosts its permeance by 40% under visible light illumination within 30 min. Furthermore, the resultant membrane shows decent dye removal efficiency in an aqueous solution, e.g., Rhodamine B (RhB), promoting efficient degradation with high reusability under visible light. Most remarkably, the resultant membrane exhibits superior anti-biofouling capability and consistently resists the adhesion of microorganisms such as cyanobacteria over a 14 day period. Thus, the combined effect of superior superwetting properties, photothermal responsivity, photocatalytic activity, and the antibacterial effect in CuO@MXene-PAN NFM contributes to the efficient treatment of intricate oily wastewater. This synergistic combination of superior properties in the membrane could be an appealing strategy for the broad development of multifunctional materials to prevent fouling during actual separation performance.

A Photochemically Active Cu2O Nanoparticle Endows Scaffolds with Good Antibacterial Performance by Efficiently Generating Reactive Oxygen Species

Cuprous oxide (Cu2O) has great potential in photodynamic therapy for implant-associated infections due to its good biocompatibility and photoelectric properties. Nevertheless, the rapid recombination of electrons and holes weakens its photodynamic antibacterial effect. In this work, a new nanosystem (Cu2O@rGO) with excellent photodynamic performance was designed via the in situ growth of Cu2O on reduced graphene oxide (rGO). Specifically, rGO with lower Fermi levels served as an electron trap to capture photoexcited electrons from Cu2O, thereby promoting electron-hole separation. More importantly, the surface of rGO could quickly transfer electrons from Cu2O owing to its excellent conductivity, thus efficiently suppressing the recombination of electron-hole pairs. Subsequently, the Cu2O@rGO nanoparticle was introduced into poly-L-lactic acid (PLLA) powder to prepare PLLA/Cu2O@rGO porous scaffolds through selective laser sintering. Photochemical analysis showed that the photocurrent of Cu2O@rGO increased by about two times after the incorporation of GO nanosheets, thus enhancing the efficiency of photogenerated charge carriers and promoting electron-hole separation. Moreover, the ROS production of the PLLA/Cu2O@rGO scaffold was significantly increased by about two times as compared with that of the PLLA/Cu2O scaffold. The antibacterial results showed that PLLA/Cu2O@rGO possessed antibacterial rates of 83.7% and 81.3% against Escherichia coli and Staphylococcus aureus, respectively. In summary, this work provides an effective strategy for combating implant-related infections.

Tungsten-based Lindqvist and Keggin type polyoxometalates as efficient photocatalysts for degradation of toxic chemical dyes

Photocatalytic dye degradation employing polyoxometalates (POMs) has been a research focus for several years. We report the facile synthesis of tungsten-based Lindqvist and Keggin-type POMs that degrade toxic chemical dyes, methyl orange (MO) and methylene blue (MB), respectively. The Lindqvist POM, sodium hexatungstate, Na2W6O19, degrades MO under 100 W UV light irradiation within 15 min, whereas the Keggin POM, Ag4PW11VO40, degrades MB under 20 W visible light source within 180 min. The effect of various operating parameters, such as photocatalyst concentration, pH, time, and initial dye concentration, were assessed in the degradation of both dyes. The photoelectrochemical performance of the as-synthesized polyoxometalates shows that the Ag4PW11VO40 shows 2.4 times higher photocurrent density than Na2W6O19 at a potential of 0.9 V vs. Ag/AgCl. Electrochemical impedance analysis reveals that Ag4PW11VO40 exhibits much lower charge transfer resistance as compared to Na2W6O19, which indicates facile charge transfer at the electrode-electrolyte interface. Further Mott-Schottky measurements reveal that both the catalysts possess n-type semiconductivity and the charge carrier concentration of Ag4PW11VO40 (5.89 × 1019 cm-3) is 1.4 times higher as compared to Na2W6O19 (4.25 × 1019 cm-3). This work offers a new paradigm for designing polyoxometalates suitable for efficient photocatalytic degradation of organic dyes.

MOFs as Versatile Catalysts: Synthesis Strategies and Applications in Value-Added Compound Production

Catalysts played a crucial role in advancing modern human civilization, from ancient times to the industrial revolution. Due to high cost and limited availability of traditional catalysts, there is a need to develop cost-effective, high-activity, and nonprecious metal-based electrocatalysts. Metal-organic frameworks (MOFs) have emerged as an ideal candidate for heterogeneous catalysis due to their physicochemical properties, hybrid inorganic/organic structures, uncoordinated metal sites, and accessible organic sections. MOFs are high nanoporous crystalline materials that can be used as catalysts to facilitate polymerization reactions. Their chemical and structural diversity make them effective for various reactions compared to traditional catalysts. MOFs have been applied in gas storage and separation, ion-exchange, drug delivery, luminescence, sensing, nanofilters, water purification, and catalysis. The review focuses on MOF-enabled heterogeneous catalysis for value-added compound production, including alcohol oxidation, olefin oligomerization, and polymerization reactions. MOFs offer tunable porosity, high spatial density, and single-crystal XRD control over catalyst properties. In this review, MOFs were focused on reactions of CO2 fixation, CO2 reduction, and photoelectrochemical water splitting. Overall, MOFs have great potential as versatile catalysts for diverse applications in the future.

Quantitative In Situ Monitoring of Cu-Atom Release by Cu2O Nanocatalysts under Photocatalytic CO2 Reduction Conditions: New Insights into the Photocorrosion Mechanism

Cu₂O is among the most promising photocatalysts for CO₂ reduction, however its photocorrosion remains a standalone challenge. Herein, we present an in situ study of the release of Cu ions from Cu₂O nanocatalysts under photocatalytic conditions in the presence of HCO₃ as a catalytic substrate in H₂O. The Cu-oxide nanomaterials were produced by Flame Spray Pyrolysis (FSP) technology. Using Electron Paramagnetic Resonance (EPR) spectroscopy in tandem with analytical Anodic Stripping Voltammetry (ASV), we monitored in situ the Cu²⁺ atom release from the Cu₂O nanoparticles in comparison with CuO nanoparticles under photocatalytic conditions. Our quantitative, kinetic data show that light has detrimental effect on the photocorrosion of Cu₂O and ensuing Cu²⁺ ion release in the H₂O solution, up to 15.7% of its mass. EPR reveals that HCO₃ acts as a ligand of the Cu²⁺ ions, promoting the liberation of {HCO₃-Cu} complexes in solution from Cu₂O, up to 27% of its mass. HCO₃ alone exerted a marginal effect. XRD data show that under prolonged irradiation, part of Cu²⁺ ions can reprecipitate on the Cu₂O surface, creating a passivating CuO layer that stabilizes the Cu₂O from further photocorrosion. Including isopropanol as a hole scavenger has a drastic effect on the photocorrosion of Cu₂O nanoparticles and suppresses the release of Cu²⁺ ions to the solution. Methodwise, the present data exemplify that EPR and ASV can be useful tools to help quantitatively understand the solid-solution interface photocorrosion phenomena for Cu₂O.