Stretch-Induced Robust Intrinsic Antibacterial Thermoplastic Gelatin Organohydrogel for a Thermoenhanced Supercapacitor and Mono-gauge-factor Sensor

Multiple covalent modification enables nylon fiber biosensor with robust scrub-resistant and signal-capture ability for multiscenario health monitoring and security warning

Nylon fibers have great potentials in smart textiles due to their excellent wear resistance, resilience, and chemical stability, whereas poor combination between nylon fibers and conductive materials causes discontinuous signal capture. In this work, nylon fibers/di-aldehyde cellulose nanocrystals/polypyrrole (NFACP) biosensors with robust scrub-resistant and signal-capture ability were fabricated by interfacial multiple covalent reactions. The best NFACP0.2 biosensor exhibited high conductivity (354 S/m), robust mechanical strength and stretching-releasing dynamic durability. Especially, its textile sensors still possessed high sensitivity and excellent sensing performance after repeated washing and friction. Moreover, NFACP0.2 biosensor can be designed into various multifunctional health monitoring and security warning systems for "stress reducing exercise" enthusiasts, high-altitude activities, and deep-sea exploration, demonstating great potentials of conductive nylon fiber biosensor in flexible electronics.

High Hydrophilic and Antibacterial Efficient UV-Curable Silicone-Containing Choline Chloride Quaternary Ammonium Salts Functionalized Materials

Antibacterial materials with high hydrophobicity have drawbacks such as protein adsorption, bacterial contamination, and biofilm formation, which are responsible for some serious adverse health events. Therefore, antibacterial materials with high hydrophilicity are highly desired. In this paper, UV-curable antibacterial materials are prepared from silicone-containing Choline chloride (ChCl) functionalized hyperbranched quaternary ammonium salts (QAS) and tri-hydroxylethyl acrylate phosphate (TAEP). The materials show high hydrophilic performance because their water contact angle is as low as 19.3°. The materials also exhibit quite high antibacterial efficiency against S. aureus over 95.6%, fairly high transmittance over 90%, and good mechanical performance with tensile strength as high as 6.5 MPa. It reveals that it is a feasible strategy to develop antibacterial materials with low hydrophobicity from silicone-modified ChCl-functionalized hyperbranched QAS.

Natural polymer starch-based materials for flexible electronic sensor development: A review of recent progress

In response to the burgeoning interest in the development of highly conformable and resilient flexible electronic sensors capable of transducing diverse physical stimuli, this review investigates the pivotal role of natural polymers, specifically those derived from starch, in crafting sustainable and biocompatible sensing materials. Expounding on cutting-edge research, the exploration delves into innovative strategies employed to leverage the distinctive attributes of starch in conjunction with other polymers for the fabrication of advanced sensors. The comprehensive discussion encompasses a spectrum of starch-based materials, spanning all-starch-based gels to starch-based soft composites, meticulously scrutinizing their applications in constructing resistive, capacitive, piezoelectric, and triboelectric sensors. These intricately designed sensors exhibit proficiency in detecting an array of stimuli, including strain, temperature, humidity, liquids, and enzymes, thereby playing a pivotal role in the continuous and non-invasive monitoring of human body motions, physiological signals, and environmental conditions. The review highlights the intricate interplay between material properties, sensor design, and sensing performance, emphasizing the unique advantages conferred by starch-based materials, such as self-adhesiveness, self-healability, and re-processibility facilitated by dynamic bonding. In conclusion, the paper outlines current challenges and future research opportunities in this evolving field, offering valuable insights for prospective investigations.

Recent Advances in Biopolymer-Based Hydrogel Electrolytes for Flexible Supercapacitors

Growing concern regarding the impact of fossil fuels has led to demands for the development of green and renewable materials for advanced electrochemical energy storage devices. Biopolymers with unique hierarchical structures and physicochemical properties, serving as an appealing platform for the advancement of sustainable energy, have found widespread application in the gel electrolytes of supercapacitors. In this Review, we outline the structure and characteristics of various biopolymers, discuss the proposed mechanisms and assess the evaluation metrics of gel electrolytes in supercapacitor devices, and further analyze the roles of biopolymer materials in this context. The state-of-the-art electrochemical performance of biopolymer-based hydrogel electrolytes for supercapacitors and their multiple functionalities are summarized, while underscoring the current technical challenges and potential solutions. This Review is intended to offer a thorough overview of recent developments in biopolymer-based hydrogel electrolytes, highlighting research concerning green and sustainable energy storage devices and potential avenues for further development.

Mechanically Robust and Highly Conductive Poly(ionic liquid)/Polyacrylamide Double-Network Hydrogel Electrolytes for Flexible Symmetric Supercapacitors with a Wide Operating Voltage Range

Flexible electronic devices, such as supercapacitors (SCs), place high demands on the mechanical properties, ionic conductivity, and electrochemical stability of electrolytes. Hydrogels, which combine flexibility and the advantages of both solid and liquid electrolytes, will meet the demand. Here, we report the synthesis of novel poly(ionic liquid)/polyacrylamide double-network (DN) (PIL/PAM DN) hydrogel electrolytes containing different metal salts via a two-step γ-radiation method. The resultant Li2SO4-1.0/PIL/PAM DN hydrogel electrolyte possesses excellent mechanical properties (tensile strength of 3.64 MPa, elongation at break of 446%) and high ionic conductivity (24.1 mS·cm-1). The corresponding flexible SC based on the Li2SO4-1.0/PIL/PAM DN hydrogel electrolyte (SC-Li2SO4) presents improved ion diffusion, ideal electrochemical double-layer capacitor behavior, good rate capability, and excellent cyclic stability. Moreover, symmetric SC-Li2SO4 achieves a wide operating voltage range of up to 1.5 V, with a maximum energy density of 26.0 W h·kg-1 and a capacitance retention of 94.1% after 10,000 galvanostatic charge-discharge cycles, owing to the deactivation of free water molecules by the synergistic effect of PIL, PAM, and SO42-. Above all, the capacitance of SC-Li2SO4 is well-maintained after overcharge, overdischarge, short circuit, extreme temperature, compression, and bending tests, indicating its high security and flexibility. This work reveals the enormous application potential of PIL-based conductive hydrogel electrolytes for flexible electronic devices.

Adopting the "Missile boats-Aircraft carrier" strategy via human-contact friendly oxidized starch to achieve rapid-sustainably antibacterial paperboards

Polysaccharide-based antibacterial agents have received tremendous attention for the facile fabrication, low toxicity, and high compatibility with carbohydrate polymers. However, the antimicrobial mechanism, activity, and cytotoxicity for human-contact paperboards of oxidized starch (OST) with high carboxyl content, has not been explored. Herein, OST-27- 75 with 27- 75 wt% carboxyl contents were fabricated by H2O2 and coated on paperboards. Strikingly, OST-55 coating layer (16 g/m2) did not exfoliate from paperboard and possessed the rapid-sustainable antibacterial performance against Staphylococcus aureus and Escherichia coli. The soluble and insoluble components of OST-55 (OST55-S: OST55-IS mass ratio = 1: 2.1) presented different antimicrobial features and herein they were characterized by GC-MS, FT-IR, H-NMR, XRD, bacteriostatic activities, biofilm formation inhibition and intracellular constituent leakage to survey the antibacterial mechanism. The results revealed OST55-S displayed an amorphous structure and possessed superior antibacterial activity against S. aureus (MIC = 4 mg/mL) and E. coli (MIC = 8 mg/mL). Distinctively, OST55-S could rapidly ionize [H+] like "missile boats" from small molecule saccharides, while OST55-IS polyelectrolyte could continuously and slowly release for [H+] like an "aircraft carrier" to inhibit biofilm formation and disrupt cell structure. Eventually, the "Missile boats-Aircraft carrier" strategy provided a green methodology to fabricate polymeric antibacterial agents and expanded the use of cellulose-based materials.

Ammonium Folate-Reinforced Self-Assembly of Gelatin into N/B/O-Enriched Hierarchical Porous Carbons with Loosely Layered Structure for Anti-Freezing Flexible Supercapacitors

Heteroatom-doped layered porous carbons are recently regarded as promising electrode materials for high energy density supercapacitors because they can integrate high-level heteroatom-doping and layered nano-space together to provide huge pseudocapacitive reaction areas and accelerate ion diffusion/transport. Herein, an innovative strategy is reported to prepare N/B/O co-doped layered porous carbons via ammonium folate-reinforced self-assembly of gelatin and boric acid followed by carbonization. Biomass-derived ammonium folate not only acts as an N-riched precursor but also can fasten in the process of self-assembly via boric acid-assisted electrostatic adsorption and hydrogen bonding to promote the formation of stable 3D cross-linked networks, resulting in the obtained N/B/O co-doped layered porous carbon (BNLC-850) has a large specific surface area (1822 m2 g-1 ), hierarchical porous structure and super-high heteroatom contents (N, 12.65; B, 5.67; and O, 13.84 at.%). The BNLC-850 achieves an ultrahigh specific capacitance of 525.2 F g-1 in the alkaline electrolyte at 0.5 A g-1 , meanwhile, DFT calculations reveal that the high-level N/B/O-doping can effectively weaken the adsorption barriers of K-ions. Moreover, the BNLC-850 assembles anti-freezing flexible solid-state supercapacitors in MPEI-TF-IL gel polymer electrolyte deliver a high energy density of 41.2 Wh kg-1 , excellent flexibility, and long cycle-life at -20 °C.

Tendon Repair and Regeneration Using Bioinspired Fibrillation Engineering That Mimicked the Structure and Mechanics of Natural Tissue

Replicating the controlled nanofibrillar architecture of collagenous tissue represents a promising approach in the design of tendon replacements that have tissue-mimicking biomechanics─outstanding mechanical strength and toughness, defect tolerance, and fatigue and fracture resistance. Guided by this principle, a fibrous artificial tendon (FAT) was constructed in the present study using an engineering strategy inspired by the fibrillation of a naturally spun silk protein. This bioinspired FAT featured a highly ordered molecular and nanofibrillar architecture similar to that of soft collagenous tissue, which exhibited the mechanical and fracture characteristics of tendons. Such similarities provided the motivation to investigate FAT for applications in Achilles tendon defect repair. In vitro cellular morphology and expression of tendon-related genes in cell culture and in vivo modeling of tendon injury clearly revealed that the highly oriented nanofibrils in the FAT substantially promoted the expression of tendon-related genes combined with the Achilles tendon structure and function. These results provide confidence about the potential clinical applications of the FAT.