High-Quality Cs3Cu2I5@PMMA Scintillator Films Assisted by Multiprocessing for X-ray Imaging

A Thermo-Responsive MOFs for X-Ray Scintillator

Thermo-responsive smart materials have aroused extensive interest due to the particular significance of temperature sensing. Although various photoluminescent materials are explored in thermal detection, it is not applicable enough in X-ray radiation environment where the accuracy and reliability will be influenced. Here, a strategy is proposed by introducing the concept of radio-luminescent functional building units (RBUs) to construct thermo-responsive lanthanide metal-organic frameworks (Ln-MOFs) scintillators for self-calibrating thermometry. The rational designs of RBUs (including organic ligand and Tb3+/Eu3+) with appropriate energy levels lead to high-performance radio-luminescence. Ln-MOFs scintillators exhibit perfect linear response to X-ray, presenting low dose rate detection limit (min ≈156.1 nGyairs-1). Self-calibrating detection based on ratiometric XEL intensities is achieved with good absolute and relative sensitivities of 6.74 and 8.1%K-1, respectively. High relative light yield (max ≈39000 photons MeV-1), imaging spatial resolution (max ≈18 lp mm-1), irradiation stability (intensity ≈100% at 368 K in total dose up to 215 Gyair), and giant color transformation visualization benefit the applications, especially the in situ thermo-responsive X-ray imaging. Such strategy provides a promising way to develop the novel smart photonic materials with excellent scintillator performances.

Crystal Field-Engineered Cr3+-Doped Gd3(MgxGa5-2xGex)O12 Phosphors for Near-Infrared LEDs and X-ray Imaging Applications

Inorganic materials doped with chromium (Cr) ions generate remarkable and adjustable broadband near-infrared (NIR) light, offering promising applications in the fields of imaging and night vision technology. However, achieving high efficiency and thermal stability in these broadband NIR phosphors poses a significant challenge for their practical application. Here, we employ crystal field engineering to modulate the NIR characteristics of Cr3+-doped Gd3Ga5O12 (GGG). The Gd3MgxGa5-2xGexO12 (GMGG):7.5% Cr3+ (x = 0, 0.05, 0.15, 0.20, and 0.40) phosphors with NIR emission are developed through the cosubstitution of Mg2+ and Ge4+ for Ga3+ sites. This cosubstitution strategy also effectively reduces the crystal field strength around Cr3+ ions, which results in a significant enhancement of the photoluminescence (PL) full width at half-maximum (fwhm) from 97 to 165 nm, alongside a red shift in the PL peak and an enhancement of the PL intensity up to 2.3 times. Notably, the thermal stability of the PL behaviors is also improved. The developed phosphors demonstrate significant potential in biological tissue penetration and night vision, as well as an exceptional scintillation performance for NIR scintillator imaging. This research paves a new perspective on the development of high-performance NIR technology in light-emitting diodes (LEDs) and X-ray imaging applications.

High-Resolution X-ray Image from Copper-Based Perovskite Hybrid Polymer

Cs3Cu2I5 nanocrystals (NCs) are considered to be promising materials due to their high photoluminescence efficiency, lack of lead toxicity, and X-ray responsiveness. However, during the crystallization process, NCs are prone to agglomeration and exhibit uneven size distribution, resulting in several light scattering that severely affect their imaging resolution. Herein, we successfully developed a high-resolution scintillator film by growing copper-based perovskite NCs within a hybrid polymer matrix. By leveraging the ingenious integration of polyvinylidene fluoride (PVDF) and polymethyl methacrylate (PMMA), the size and distribution uniformity of Cs3Cu2I5 NCs can be effectively controlled. Consequently, a high spatial resolution of 14.3 lp mm-1 and a low detection limit of 105 nGy s-1 are achieved, and the scintillator film has excellent flexibility and stability. These results highlight the promising application of Cs3Cu2I5 scintillator films in low-cost, flexible, and high-performance medical imaging.

Passivation of Organic-Inorganic Hybrid Perovskite with Poly(lactic Acid) to Achieve Stable Red-Light Flexible Films

Low-dimensional organic-inorganic hybrid perovskites (OIHPs) have shown significant potential in the optoelectronic field due to their adjustable structure and properties. However, the poor air stability and flexibility of the OIHP crystals limit their further development. Herein, three OIHP crystals have been synthesized using cadmium chloride and the isomer of phenylenediamine as raw materials. Mn2+ doping turns on the red-light emission of Cd-based OIHPs at around 625 nm. Interestingly, the organic ligands with different steric hindrance can induce a transition of the OIHP structure from two dimensions (2D) to one dimension (1D), thereby regulating the quantum yield of red luminescence in the range of 38.4% to nearly 100%. It is found that the surface-exposed amino groups are easy to oxidize, resulting in the instability of these OIHP crystals. Therefore, poly(lactic acid) (PLA) is selected to passivate OIHPs through hydrogen bonding between C═O of PLA and -NH2 on the surface of OIHPs. As a result, the production of OIHP-based flexible films with highly efficient and stable red emission can be obtained after being encapsulated by PLA. They demonstrate enormous application potential in flexible X-ray imaging. This study not only realizes stable perovskite films but also provides an effective design idea for red flexible scintillators.

Transparent and Planar Cs3Cu2Cl5 Crystals for Micrometer-Resolution X-ray Imaging Screen

Copper-based (I) halide perovskites have emerged as a promising candidate for scintillation screens in X-ray inspection and imaging areas due to their solution processability and high light yield. Here, a centimeter-sized Cs3Cu2Cl5 single crystal was grown by a slow-cooling method. The planar orientation was controlled in a space-confined chamber, generating a planar crystal which is readily used for a scintillation screen without any further shaping. The crystal exhibited a unity photoluminescence quantum yield and superior scintillation performance. The Cs3Cu2Cl5 single crystal exhibited a high light yield up to 95,000 photons/MeV, which enabled an X-ray detector of a detection limit down to 2.7 μGyair/s. The homemade imager demonstrated a spatial resolution of 105 lp/mm, representing an unprecedented micrometer resolution in laboratory. Importantly, the stability of Cs3Cu2Cl5 was significantly improved by a new surface passivation procedure, whereby the passivated crystal reserved its phase after 6 months' storage in a vial. This work introduced a new solution-based synthetic method for two-dimensional scintillating crystals, opening many avenues to high-performance X-ray imaging applications.