Biodegradable Electroactive Nanofibrous Air Filters for Long-Term Respiratory Healthcare and Self-Powered Monitoring

An electrostatically spun cellulose-based self-powered mask with high efficiency air filtration and ammonia sensing

On construction sites impacted by particulate matter and hazardous gases, portable integrated air filtration equipment with high efficiency, minimal pressure drops and ammonia (NH3) alarms is critical. Triboelectric nanogenerators (TENG) present a sustainable solution by generating self-powered electricity to fulfill these requirements. In this study, we synthesized zeolitic imidazolate framework-8 (ZIF-8) in situ on the surface of titanium carbide (Ti3C2Tx) to create Ti3C2Tx/ZIF-8, grafted it onto cellulose diacetate via tetraethyl orthosilicate, and ultimately developed a cellulose-based nanofibrous membrane through electrospinning, combining it with a negative triboelectric material to construct a self-powered TENG-based mask. The device achieved a balance between a low pressure drop (61 Pa) and high filtration efficiency (99.21 %, 99.71 %, and 99.98 % for PM0.3, PM0.5, and PM1, respectively). Furthermore, the device responds swiftly to NH3; at a concentration of 100 ppm NH3, it achieves a rapid response rate of 83 %, with a response/recovery time as low as 12/14 s. Notably, the device retains its rapid sterilization capability within a short duration (20 min) and demonstrates remarkable stability across its various performance metrics, even after multiple washes. This study presents a novel approach to the development of multi-use, self-powered wearable devices featuring excellent air filtration performance and NH3 detection capabilities.

Biodegradable Poly (L-Lactic acid) Fibrous Membrane with Ribbon-Structured Fibers and Ultrafine Nanofibers Enhances Air Filtration Performance

Here, the poly (l-lactic acid) (PLLA) membrane with multi-structured networks (MSN) is successfully prepared by electrospinning technology for the first time. It is composed of micron-sized ribbon-structured fibers and ultrafine nanofibers with a diameter of tens of nanometers, and they are connected to form the new network structure. Thanks to the special fiber morphology and structure, the interception and electrostatic adsorption ability for against atmospheric particulate matter (PM) are significantly enhanced, and the resistance to airflow is reduced due to the "slip effect" caused by ultrafine nanofibers. The PLLA MSN membrane shows excellent filtration performance with ultra-high filtration efficiency (>99.9% for PM2.5 and >99.5% for PM0.3) and ultra-low pressure drop (≈20 Pa). It has demonstrated filtration performance that even exceeds current non-biodegradable polymer materials, laying the foundation for future applications of biodegradable PLLA in the field of air filtration. In addition, this new structure also provides a new idea for optimizing the performance of other polymer materials.

MOF Nanosheet-Functionalized Poly(lactic acid) Meta-membranes for Long-Term Air Purification and Intelligent Monitoring

The wide use of conventional polymeric air filters is causing a dramatically increasing accumulation of plastic and microplastic pollution. The development of poly(lactic acid) (PLA) fibrous membranes for efficient air purification is of important significance but frequently challenged by the rapid decay of filtration performance due to the intrinsically poor electret properties of PLA. Here, we propose an electroactivity promotion methodology, involving the one-step synthesis and homogeneous incorporation of high-dielectric ZIF-8 nanosheets (ZIFNSs), to facilitate interfacial polarization and fiber refinement during electrospinning of PLA nanofibers. The preparative electrospun PLA/ZIFNS meta-membranes exhibited an unusual combination of significantly reduced nanofiber diameter (∼462 nm), enhanced surface potential (approaching 10 kV), and increased surface activity and facilitated the formation of electroactive phases. With well-controlled morphological features, the highly electroactive PLA/ZIFNS meta-membranes exhibited exceptional filtration efficiencies for PM2.5 and PM0.3 (99.2 and 96.0%, respectively) even at the highest airflow rate of 85 L/min, in clear contrast to that of its pure PLA counterpart (only 79.3 and 74.6%). Arising from the increased electroactivity and active contact sites, remarkable triboelectric performance and self-charging mechanisms were demonstrated for the PLA/ZIFNS meta-membranes, contributing to long-term efficient PM0.3 filtration (97.5% for over 360 min). Moreover, as triggered by physiological activities like respiration and speaking, the electroactive PLA/ZIFNS meta-membranes enabled real-time monitoring with high sensitivity and specificity. The proposed strategy affords significant promotion of electroactivity and triboelectric performance for PLA nanofibers, which may motivate the development of ecofriendly protective membranes for respiratory healthcare and real-time monitoring.

Hierarchically Nano-Decorated Poly(lactic acid) Nanofibers for Humidity-Resistant Respiratory Healthcare and High-Accuracy Disease Diagnosis

The application of biodegradable and eco-friendly poly(lactic acid) (PLA) nanofibrous membranes (NFMs) toward respiratory healthcare has long been thwarted by the poor electroactivity and low surface activity of PLA. Herein, we unravel a microwave-assisted route to fabricate rod-like ZnO nanodielectrics, which were decorated with dopamine (ZnO@PDA) and anchored at the PLA nanofibers via an electrospinning-electrospray approach. The PLA/ZnO@PDA NFMs featured a substantially elevated specific surface area (up to 20.7 m2/g), increased dielectric constant (nearly 1.8) and a surface potential as high as 9.5 kV, resulting in superior air filtering performance (99.45% for PM0.3, 94.1 Pa, 32 L/min) compared with the pure PLA counterpart (90.04%, 169.0 Pa, 32 L/min). The notably increased electroactivity endowed the PLA/ZnO@PDA NFMs with significant improvements in triboelectric properties (output voltage of 11.5 V at 10 N, 0.5 Hz), laying down the cornerstone for self-powered monitoring of personal respiration. More importantly, a deep learning-assisted diagnostic system was developed based on respiration-driven signal patterns, enabling intelligent and real-time disease diagnosis with 100% accuracy for the protective membranes. The proposed hierarchical nanodecoration strategy opens up new possibilities for engendering eco-friendly nanofibers with an exceptional combination of efficient respiratory healthcare and intelligent diagnosis.

Ultralow-resistance and self-sterilization biodegradable nanofibrous membranes for efficient PM0.3 removal and machine learning-assisted health management

The development of multifunctional nanofibrous membranes (NFMs) that enable anti-viral protection during air purification and respiratory disease diagnosis for health management is of increasing importance. Herein, we unraveled a heterostructure-enhanced electro-induced stereocomplexation (HEIS) strategy to fabrication of poly(lactic acid) (PLA) NFMs enabling a combination of efficient PM removal, respiratory monitoring and self-sterilization. The strategy involved an electro-induced stereocomplexation (EIS) approach to trigger the generation of hydrogen bonds between enantiomeric poly(L-lactic acid) (PLLA) and poly(D-lactic acid) (PDLA) chains, promoting CO dipole alignment and molecular polarization during electrospinning. This was further enhanced by incorporation of Ag-doped TiO2 (Ag-TIO) nanodielectrics to promote the electroactivity and surface activity, conferring profound refinement of PLA nanofibers (from 460 nm to an ultralow level of 168 nm) and high porosities of over 91 %. Arising from the sustainable generation of plentiful charges based on triboelectric nanogenerator (TENG) mechanisms, the electroactive PLA NFMs exhibited remarkable triboelectric properties even in high-humidity environments (80 %RH), excellent PM0.3 filtration efficiency with an ultralow pressure drop (93.1 %, 31.8 Pa, 32 L/min), and 100 % antimicrobial efficiency against both E. coli and S. aureus. Moreover, a deep-learning algorithm based on convolutional neural network (CNN) was proposed to recognize various respiratory patterns. The proposed strategy confers the biodegradable NFMs an unusual combination of ultralow-resistance air purification and machine learning-assisted health management, signifying promising prospects in environmental protection and personal healthcare.

Interfacial Polarization Strategy to Electroactive Poly(lactic acid) Nanofibers for Humidity-Resistant Respiratory Protection and Machine Learning-Assisted Monitoring

The advancement of intelligent and biodegradable respiratory protection equipment is pivotal in the realm of human health engineering. Despite significant progress, achieving a balance between efficient filtration and intelligent monitoring remains a great challenge, especially under conditions of high relative humidity (RH) and high airflow rate (AR). Herein, we proposed an interfacial stereocomplexation (ISC) strategy to facilitate intensive interfacial polarization for poly(lactic acid) (PLA) nanofibrous membranes, which were customized for machine learning-assisted respiratory diagnosis. Theoretical principles underlying the facilitated formation of the electroactive phase and aligned PLA chains were quantitatively depicted in the ISC-PLA nanofibers, contributing to the increased dielectric constant and surface potential (as high as 2.2 and 5.1 kV, respectively). Benefiting from the respiration-driven triboelectric mechanisms, the ISC-PLA demonstrated a high PM0.3 filtration efficiency of over 99% with an ultralow pressure drop (75 Pa), even in challenging circumstances (95 ± 5% RH, AR of 85 L/min). Furthermore, we implemented the ISC-PLA with multifunction respiratory monitoring (response time of 0.56 s and recovery time of 0.25 s) and wireless transmission technology, yielding a high recognition rate of 83% for personal breath states. This innovation has practical implications for health management and theoretical advancements in respiratory protection equipment.

Bio-inspired gradient poly(lactic acid) nanofibers for active capturing of PM0.3 and real-time respiratory monitoring

The concept of bio-inspired gradient hierarchies, in which the well-defined MOF nanocrystals serve as active nanodielectrics to create electroactive shell at poly(lactic acid) (PLA) nanofibers, is introduced to promote the surface activity and electroactivity of PLA nanofibrous membranes (NFMs). The strategy enabled significant refinement of PLA nanofibers during coaxial electrospinning (∼40 % decline of fiber diameter), accompanied by remarkable increase of specific surface area (nearly 1.5 m2/g), porosity (approximately 85 %) and dielectric constants for the bio-inspired gradient PLA (BG-PLA) NFMs. It largely boosted initial electret properties and electrostatic adsorption capability of BG-PLA NFMs, as well as charge regeneration by TENG mechanisms even under high-humidity environment. The BG-PLA NFMs thus featured exceptionally high PM0.3 filtration efficiencies with well-controlled air resistance (94.3 %, 163.4 Pa, 85 L/min), in contrast to the relatively low efficiency of only 80.0 % for normal PLA. During the application evaluation of outdoor air purification, excellent long-term filtering performance was demonstrated for the BG-PLA for up to 4 h (nearly 98.0 %, 53 Pa), whereas normal PLA exhibited a gradually declined filtration efficiency and an increased pressure drop. Moreover, the BG-PLA NFMs of increased electroactivity were ready to generate tribo-output currents as driven by respiratory vibrations, which enabled real-time monitoring of electrophysiological signals. This bio-inspired gradient strategy opens up promising pathways to engender biodegradable nanofibers of high surface activity and electroactivity, which has significant implications for intelligent protective membranes.

Fiber-in-Tube Electrifiable Structure for Virus Filtration Self-Generated Static Electricity by Vibration/Sound

Fiber has been considered as an ideal material for virus insulation due to the readily available electrostatic adsorption. However, restricted by the electrostatic attenuation and filtration performance decline, their long-lasting applications are unable to satisfy the requirements of medical protective equipment for major medical and health emergencies such as global epidemics, which results in both a waste of resources and environmental pollution. We overcame these issues by constructing a fiber-in-tube structure, achieving the robust reusability of fibrous membranes. Core fibers within the hollow could form generators with tube walls of shell fibers to provide persistent, renewable static electricity via piezoelectricity and triboelectricity. The PM0.3 insulation efficiency achieved 98% even after 72 h of humidity and heat aging, through beating and acoustic waves, which is greatly improved compared with that of traditional nonwoven fabric (∼10% insulation). A mask spun with our fiber also has a low breathing resistance (differential pressure <24.4 Pa/cm2). We offer an approach to enrich multifunctional fiber for developing electrifiable filters, which make the fiber-in-tube filtration membrane able to durably maintain a higher level of protective performance to reduce the replacement and provide a new train of thought for the preparation of other high-performance protective products.

Tribo-charge enhanced and cellulose based biodegradable nanofibrous membranes with highly fluffy structure for air filtration and self-powered respiration monitoring systems

Recently, the demand for healthcare products especially wearable smart masks is increasing. The biosafety and degradability of smart masks are crucial for human health and environmental protection. However, the development of biodegradable and biocompatible fibrous membranes with high filtration efficiency and low pressure drop is still a challenge. How to realize the collaborative improvement between air filtration efficiency and pressure drop of the nanofibrous membrane is still a challenge. Here, a tribo-charge enhanced and biodegradable nanofibrous membranes (TCB NFMs) with highly fluffy structure for air filtration and self-powered respiration monitoring systems is reported for the first time. The filtration efficiency and pressure drop of the prepared membranes for 0.3 µm NaCl particulates is 99.971% and 41.67 Pa. The TCB NFMs based smart mask possesses a series of satisfactory and excellent characteristics, such as self-powered, biodegradable, biocompatible, high filtration efficiency, and low pressure drop, which is highly promising for application in air filtration systems and intelligent wearable respiration monitoring systems.

A ZIF-8-encapsulated interpenetrated hydrogel/nanofiber composite patch for chronic wound treatment

Designing wound dressings necessitates the crucial considerations of maintaining a moist environment and implementing effective bacterial control. Furthermore, developing a three-dimensional framework emulating the extracellular matrix (ECM) confers advantages in fostering cellular migration and proliferation. Inspired by this, hydrogel/nanofiber composites have been demonstrated as promising materials for wound dressings. The composites also overcome the disadvantages of poor mechanical properties and rapid release of traditional pure hydrogels. In this study, we constructed a calcium alginate hydrogel/polylactic acid nanofiber (CAH/PLANF) composite with an interpenetrated network. Additionally, the synthesis of zeolitic imidazolate framework-8 (ZIF-8) incorporated into the composite system endowed the system with enhanced mechanical properties and photodynamic antibacterial attributes. The obtained composite patch (ZIF-8@CAH/PLANF) exhibited excellent swelling, strong mechanical properties, low cytotoxicity, and durable photodynamic antibacterial effect with an antibacterial efficacy of higher than 99.99%. Finally, bacterial infection and wound healing properties were investigated in vivo, and the ZIF-8@CAH/PLANF patch was proven to have the ability to fight infection and accelerate wound healing.

Ethyl cellulose/gelatin/β-cyclodextrin/curcumin nanofibrous membrane with antibacterial and formaldehyde adsorbable capabilities for lightweight and high-performance air filtration

Functionalization of bio-based nanofibers is the development tendency of high-performance air filter. However, the conventional structural optimization strategy based on high solution conductivity greatly hinders the development of fully bio-based air filter, and not conducive to sustainable development. This work fabricated fully bio-based nanofibrous membrane with formaldehyde-adsorbable and antibacterial capabilities by electrospinning low-conductivity solution for high-performance air filtration and applied to lightweight mask. The "water-like" ethyl cellulose (EC) was selected as the base polymer to "nourish" functional materials of gelatin (GE), β-cyclodextrin (βCD), and curcumin (Cur), thus forming a solution system with high binding energy differences and electrospinning into ultrafine bimodal nanofibers. The filtration efficiency for 0.3 μm NaCl particles, pressure drop, and quality factor were 99.25 %, 53 Pa, and 0.092 Pa-1, respectively; the bacteriostatic rates against Escherichia coli and Staphylococcus aureus were 99.9 % and 99.4 %, respectively; the formaldehyde adsorption capacity was 442 μg/g. This is the first report on antibacterial and formaldehyde-adsorbable high-performance air filter entirely made from bio-based materials. This simple strategy will greatly broaden the selection of materials for preparing high-performance multifunctional air filter, and promote the development of bio-based air filter.

Nano-Iron Oxide (Fe3O4) Mitigates the Effects of Microplastics on a Ryegrass Soil-Microbe-Plant System

To understand microplastic-nanomaterial interactions in agricultural systems, a randomized block 90-day pot experiment was set up to cultivate ryegrass seedings in a typical red sandy soil amended with compost (1:9 ratio). Polyvinyl chloride (PVC) and polyethylene (PE) microplastic (MP) contaminants were added into pot soils at 0.1 and 10%, whereas nano-Fe3O4 (as nanoenabled agrochemicals) was added at 0.1% and 0.5% in comparison with chemical-free controls. The combination of nano-Fe3O4 and MPs significantly increased the soil pH (+3% to + 17%) but decreased the total nitrogen content (-9% to - 30%; P < 0.05). The treatment group with both nano-Fe3O4 and PE had the highest total soil C (29 g kg-1 vs 20 g kg-1 in control) and C/N ratio (13 vs 8 in control). Increased rhizosphere nano-Fe3O4 concentrations promoted ryegrass growth (+42% dry weight) by enhancing the chlorophyll (+20%) and carotenoid (+15%) activities. Plant leaf and root peroxidase enzyme activity was more significantly affected by nano-Fe3O4 with PVC (+15%) than with PE (+6%). Nano-Fe3O4 significantly changed the ryegrass bacterial community structure from belowground (the rhizoplane and root endosphere) to aboveground (the phylloplane). Under MP contamination, the addition of nano-Fe3O4 increased bacterial diversity (+0.35%) and abundance (+30%) in the phylloplane and further intensified the connectivity of ryegrass aboveground bacterial networks (positive association increased 17%). The structural equation model showed that the change in the plant microbiome was associated with the rhizosphere microbiome. Overall, these findings imply the positive influences of nano-Fe3O4 on the soil-microbe-plant system and establish a method to alleviate the harmful effects of MP accumulation in soils.

Production of Ultrafine PVDF Nanofiber-/Nanonet-Based Air Filters via the Electroblowing Technique by Employing PEG as a Pore-Forming Agent

Particles with diameters smaller than 2.5 μm (PM2.5) can penetrate the respiratory system and have negative impacts on human health. Filter media with a porous surface and nanofiber/nanonet structure demonstrate superior filtration performance compared to traditional nano- and microfiber-based filters. In this study, nanostructured filters were produced using the electroblowing method from solutions containing different ratios of poly(vinylidene fluoride) (PVDF) and polyethylene glycol (PEG) polymers for the first time. By increasing the water-soluble PEG ratio in PVDF/PEG blend nanofibers and employing a water bath treatment to the produced mat afterward, a more porous fibrous structure was obtained with a lower average fiber diameter. Notably, the removal of PEG from the PVDF/PEG (3-7) sample, which had the highest PEG content, exhibited clustered nanofiber-/nanonet-like structures with average diameters of 170 and 50 nm at the points where the fibers intersect. Although this process resulted in a slight decrease in the filtration efficiency (-1.3%), the significant reduction observed in pressure drop led to a 3.2% increase in the quality factor (QF). Additionally, by exploiting the polarizability of PVDF under an electric field, the filtration efficiency of the nanostructured PVDF filters enhanced with a ratio of 3.6% after corona discharge treatment leading to a 60% improvement in the QF. As a result, the PVDF/PEG (3-7) sample presented an impressive filtration efficiency of 99.57%, a pressure drop (ΔP) of 158 Pa, and a QF of 0.0345 Pa-1.

Nanopatterned Electroactive Polylactic Acid Nanofibrous MOFilters for Efficient PM0.3 Filtration and Bacterial Inhibition

Biodegradable polylactic acid (PLA) nanofibrous membranes (NFMs) hold great potential to address the increasing airborne particulate matter (PM) and dramatic accumulation of plastic/microplastic pollution. However, the field of PLA NFM-based filters is still in its infancy, frequently dwarfed by the bottlenecks regarding relatively low surface activity, poor electroactivity, and insufficient PM capturing mechanisms. This effort discloses a microwave-assisted approach to minute-level synthesis of dielectric ZIF-8 nanocrystals with high specific surface area (over 1012 m2/g) and ultrasmall size (∼240 nm), which were intimately anchored onto PLA nanofibers (PLA@ZIF-8) by a combined "electrospinning-electrospray" strategy. This endowed the PLA@ZIF-8 NFMs with largely increased electroactivity in terms of elevated dielectric coefficient (an increase of 202%), surface potential (up to 5.8 kV), and triboelectric properties (output voltage of 30.8 V at 10 N, 0.5 Hz). Given the profound control over morphology and electroactivity, the PLA@ZIF-8 NFMs exhibited efficient filtration of PM0.3 (97.1%, 85 L/min) with a decreased air resistance (592.5 Pa), surpassing that of the pure PLA counterpart (88.4%, 650.9 Pa). This was essentially ascribed to realization of multiple filtration mechanisms for PLA@ZIF-8 NFMs, including enhanced physical interception, polar interactions, and electrostatic adsorption, and the unique self-charging function triggered by airflow vibrations. Moreover, perfect antibacterial performance was achieved for PLA@ZIF-8, showing ultrahigh inhibition rates of 99.9 and 100% against E. coli and S. aureus, respectively. The proposed hierarchical structuring strategy, offering the multifunction integration unattainable with conventional methods, may facilitate the development of biodegradable long-term air filters.