Three-Dimensional Printing of Cellulose/Covalent Organic Frameworks (CelloCOFs) for CO2 Adsorption and Water Treatment

Opportunity and Challenge of Advanced Porous Sorbents for PFAS Removal

Per- and polyfluoroalkyl substances (PFASs), comprising over 9,000 persistent synthetic organic contaminants, are extensively found in the environment and pose significant risks to both human and ecological health. Among the strategies for addressing PFAS contamination, adsorption processes have proven to be cost-effective. Traditional sorbents such as ion-exchange resins and activated carbon have been found to exhibit low adsorption capacities and slow equilibration times. Recent innovations in porous materials, including metal-organic frameworks (MOFs), covalent organic frameworks (COFs), and porous organic polymers (POPs), however, offer significant improvements in the efficiency of PFAS adsorption. This review thoroughly examines the latest advancements in these materials, analyzing their mechanisms of adsorption, and concludes by suggesting directions for future research that could further enhance their effectiveness in PFAS management.

Strong, tough, conductive and transparent nanocellulose hydrogel based on Ca2+-induced cross-linked double-networks and its adsorption of methylene blue dye

A novel multi-performance SHNC/SA/CaCl2 hydrogel with multi-performance was prepared via ultra-low-temperature freeze-thaw cycling and Ca2+ cross-linking for the removal of methylene blue (MB) from industrial wastewater. Various methods were used to characterize the structure and properties of hydrogel, and the internal structure of hydrogel showed a three-dimensional network with hydrogen and ester bonds. The SHNC/SA/CaCl2-15 hydrogel exhibited the highest tensile properties (elongation = 800 %), viscoelasticity (90 kPa), compressive strength (0.45 MPa), tensile strength (0.47 MPa) and ionic conductivity (4.34 S/cm). The maximum adsorption capacity of 2 g SHNC/SA/CaCl2-15 hydrogel was 608.49 mg/g at 40 °C, pH = 8 and adsorption 24 h. The adsorption process of hydrogel toward MB was more consistent with the second-order kinetic model and Langmuir isothermal adsorption model. According to the Langmuir isotherm model, the maximum monolayer adsorption capacity of SHNC/SA/CaCl2-15 hydrogel toward MB can reach 613.88 mg/g. Finally, it was found that the removal rate of SHNC/SA/CaCl2-15 hydrogel for MB was still as high as 90 % after five cycles of the adsorption-desorption test, and it could be reused. The hydrogel can be used as cheap and reusable adsorption material for cationic dyes. Our study provides a new perspective for the development of multifunctional cellulose hydrogel adsorbent materials.

In situ polymerization of a melamine-based microsphere into 3D nickel foam for supercapacitors

An in situ synthesis approach is used to directly grow a microsphere of melamine-glutaraldehyde (MAGA) polymer over three-dimensional (3D) nickel foam (NF). The materials are used to produce nitrogen-doped carbon (NC) with and without NF. These precursors undergo carbonization at various temperatures, namely 400 °C, 500 °C, and 700 °C. The electrochemical properties of the materials would be significantly improved by directly growing MAGA polymer on the surface of NF. The electrochemical performance of NC/NF-400 was excellent, with a capacitance of 297 F g-1 achieved at a current density of 1 A g-1. The in situ growing approach does not necessitate the use of additional chemical agents, such as binders or conductive compounds when preparing the electrode. In addition, the material exhibits only 10% reduction in capacitance after undergoing 5000 cycles, indicating excellent cycling performance. The outstanding electrochemical performance achieved by using the in situ method of MAGA microsphere polymer on NF may be attributed to the rapid transit of ions to the electrode surfaces, facilitating effortless redox reactions.