Fluorescence resonance energy transfer in a binary organic nanoparticle system and its application

Colorimetric Multigas Sensor Arrays and an Artificial Olfactory Platform for Volatile Organic Compounds

Herein, we develop colorimetric multigas sensor arrays assembling chemo-reactive fluorescent patch arrays and 10 × 10 indium gallium zinc oxide phototransistor arrays and apply them to an artificial olfactory platform to recognize five different volatile organic compounds (VOCs). Porous nanofibers, coupled with two organic emitters and emitting fluorescence, rapidly respond to gas-phased VOCs and offer unique fluorescent patterns associated with particular gas conditions, including gas kinds, concentrations, and exposure times by forming patch arrays with different fluorophore component ratios. These VOC-induced fluorescent patterns could be quantified and amplified by indium gallium zinc oxide (IGZO) phototransistor arrays functioning as a signal-generating component, resulting in gas-fingerprint patterns regarding electrical signals. Thus, the pattern library associated with VOCs and their concentration enables us to determine each airborne analyte as the artificial olfactory platform. Therefore, this system could achieve rapid, early quantitative recognition of hazardous gases and be applied as a preventative, portable, and wearable multigas identifier in various fields.

Naphthalimide-gold-based nanocomposite for the ratiometric detection of okadaic acid in shellfish

Okadaic acid (OA) is one of the known marine biotoxins produced by various dinoflagellates and exists in seafood such as shellfish. The consumption of contaminated shellfish with OA leads to diarrheic shellfish poisoning (DSP), which results in the inhibition of protein phosphatase enzymes in humans. This poisoning can cause immunotoxicity and tumor promotion due to the accumulation of okadaic acid in more than the allowed limit in bivalve molluscs. The reported methods for the detection of okadaic acid include mouse bioassays, immunoassays, chromatography coupled with spectroscopic techniques, electrochemical sensors and immunosensors. We have developed a naphthalimide-gold-based nanocomposite for the detection of okadaic acid. Individually, the organic nanoparticles (ONPs) of synthesized naphthalimide-based receptors and gold-coated ONPs are less sensitive for detection. However, fabrication of the composite of Au@ONPs and ONPs enhance the sensing properties and selectivity. The composite shows a ratiometric response in the UV-Vis absorption spectrum and quenching in the fluorescence profile with a detection limit of 20 nM for OA in aqueous medium. In cyclic voltammetry, a shift was observed in the cathodic peak (-0.532 V to -0.618 V) as well as in the anodic peak (-0.815 V to -0.847 V) with the addition of okadaic acid. To study the quick binding of the composite with OA, a time response experiment was performed. Also, the developed sensor retains its sensing ability in the pH range of 5-9 and in high salt conditions. Our developed composite can be used for the detection of OA in real applications.

Different Surface Interactions between Fluorescent Conjugated Polymers and Biological Targets

Fluorescent conjugated polymers (CPs) have attracted considerable interest in biosensing owing to their high fluorescence, tunable bandgap, and good biocompatibility. Aiming at acquiring the desired optical responses of CPs for bioapplications, it is essential that the CPs bind to biological targets with high efficacy and affinity. However, the efficient binding of CPs is largely driven by their effective interaction with target surfaces. In this Review, we will focus on the different surface interactions that pervade between CPs and biological targets. The multiple surface interactions can lead to changes in spatial conformation and distribution of CPs, which manifest alterable optical properties of CPs based on accumulation of target-directed CPs, Förster resonance energy transfer mechanism, and metal-enhanced fluorescence mechanism. Then, we display diverse bioapplications applying CPs-based surface interactions, such as cell imaging, imaging-guided detection, and photodynamic therapy. Finally, the challenges and future developments to control the efficient attachment of CPs to biological targets are discussed. We expect that the understanding of surface interactions between CPs and biological targets benefits the CPs-based system design and expands their applications in biological detections and therapies.

Circular exponential amplification of photoinduced electron transfer using hairpin probes, G-quadruplex DNAzyme and silver nanocluster-labeled DNA for ultrasensitive fluorometric determination of pathogenic bacteria

The authors describe a fluorometric strategy for the detection of pathogenic bacteria with ultrasensitivity and high specificity. This strategy relies on the combination of target-modulated photoinduced electron transfer (PET) between G-quadruplex DNAzyme and DNA (labeled with silver nanoclusters) along with hairpin probe-based circular exponential amplification. The reaction system involves three hairpin probes (H1, H2 and H3). Probe H1 contains an aptamer against S. Typhimurium and the recognition sequence for nicking endonuclease. It is used to recognize S. Typhimurium and participates in polymerase-catalyzed target recycle amplification and secondary-target recycle amplification. Probe H2 contains an aptamer against hemin and is used to form the G-quadruplex DNAzyme in the presence of hemin and potassium ion. It acts as the electron acceptor and quenches the fluorescence of the labeled DNA. Fluorescence is best measured at excitation/emission wavelengths of 567/650 nm. Probe H3 contains the template sequence for the synthesis of AgNCs and the H2-annealing sequence. Both H2 and H3 are utilized to perform a strand displacement reaction and to achieve PET between G-quadruplex DNAzyme and DNA/AgNCs. To the best of our knowledge, this is the first example of a PET between G-quadruplex DNAzyme and DNA/AgNCs coupled with circular exponential amplification. The assay has an ultra-low detection limit 8 cfu·mL^-1 of S. Typhimurium. The assay is rapid, accurate, inexpensive and simple. Hence, the strategy may represent a useful platform for ultrasensitive and highly specific detection of pathogenic bacteria as encountered in food analysis and clinical diagnosis. Graphical abstract The reaction system includes three hairpin probes (H1, H2 and H3), primer probe (P), Phi 29 DNA ploymerase (Phi 29) and nicking endonuclease Nt.AlwI (Nt.AlwI). Phi 29 and Nt.AlwI -assisted signal amplification leads to the recycling of target and produces numerous single stranded-DNAs (S). Strand displacement amplification leads to photoinduced electron transfer (PET) between G-quadruplex DNAzyme and DNA/AgNCs. HAP-based circular exponential amplification of PET results in an ultrasensitive fluorometric assay.

Nanostructure and Corresponding Quenching Efficiency of Fluorescent DNA Probes

Based on the fluorescence resonance energy transfer (FRET) mechanism, fluorescent DNA probes were prepared with a novel DNA hairpin template method, with SiO₂ coated CdTe (CdTe/SiO₂) core/shell nanoparticles used as the fluorescence energy donors and gold (Au) nanoparticles (AuNPs) as the energy acceptors. The nanostructure and energy donor/acceptor ratio in a probe were controlled with this method. The relationship between the nanostructure of the probes and FRET efficiency (quenching efficiency) were investigated. The results indicated that when the donor/acceptor ratios were 2:1, 1:1, and 1:2; the corresponding FRET efficiencies were about 33.6%, 57.5%, and 74.2%, respectively. The detection results indicated that the fluorescent recovery efficiency of the detecting system was linear when the concentration of the target DNA was about 0.0446–2.230 nmol/L. Moreover, the probes showed good sensitivity and stability in different buffer conditions with a low detection limit of about 0.106 nmol/L.

Well-defined, persistent, chiral phthalocyanine nanoclusters via G-quadruplex assembly

Octameric near-IR dye nanoclusters are produced by complexation of potassium cations with a phthalocyanine-guanosine conjugate. The combination of hydrogen-bonding, K(+) coordination, π-π stacking and steric interactions between the chiral side groups is responsible for defining a specific helical chromophore arrangement in the clusters, which display high stability and maintain their supramolecular identity onto substrates.

Ultrabright Fluorescent Silica Nanoparticles Embedded with Conjugated Oligomers and Their Application in Latent Fingerprint Detection

Fluorescent micro- and nanosized particles have a broad range of applications in biology, medicine, and engineering. For these uses, the materials should have high emission efficiency and good photostability. However, many organic fluorophores suffer from aggregation-induced quenching effects and photobleaching. Here, we used a simple method based on covalently blending a fluorescent conjugated oligomer with silica nanoparticles to achieve emission quantum yields as high as 97%. The resulting system also showed excellent stability under continuous light illumination, in a range of pH values and temperatures, and in common solvents. This fluorescent material showed outstanding properties, including highly efficient blue emission, low cost, low toxicity, and easy synthesis. Furthermore, its effectiveness for latent fingerprint detection was demonstrated as a proof of concept on various substrates. The obtained emissive fingerprint powder gave good optical/fluorescent images with high contrast and resolution between the ridges and spaces.

Preparation of Sialic Acid-Imprinted Fluorescent Conjugated Nanoparticles and Their Application for Targeted Cancer Cell Imaging

Fluorescent conjugated polymer nanoparticles have attracted great interest for applications in biological imaging owing to their excellent optical properties and low cytotoxicity; however, a lack of effective targeting limits their use. In this work, we design and synthesize a fluorescent conjugated polymer modified with a phenylboronic acid group, which can covalently bind with cis-diol-containing compounds, such as sialic acid (SA), by forming a cyclic ester. However, the obtained conjugated polymer nanoparticles failed to discriminate between cancer cells, with or without SA overexpressed surfaces (such as DU 145 and HeLa cells, respectively). To address this problem, we introduced SA template molecules into the polymer nanoparticles during the reprecipitation process and then removed the template by adjusting the solution pH. The SA-imprinted nanoparticles showed a uniform size around 30 nm and enhanced fluorescence intensity compared with unmodified polymer nanoparticles. The SA-imprinted nanoparticles exhibited selective staining for DU 145 cancer cells and did not enter HeLa cells even after long incubation times. Thus, we present a facile method to prepare fluorescent nanoparticles for applications in targeted cancer cell imaging.

Preparation of exciplex-based fluorescent organic nanoparticles and their application in cell imaging

Novel organic fluorescent nanoparticles based on exciplex were prepared and have been successfully applied in live cell imaging.

Aggregation-Induced Energy Transfer of Conjugated Polymer Materials for ATP Sensing

Water-soluble conjugated polymers are attractive fluorescent materials for applications in chemical and biological sensing. The molecular wire effect of such polymers amplifies changes in the fluorescence signal, which can be used for detecting various analytes with high sensitivity. In this work, we report an efficient ratiometric fluorescent probe based on a water-soluble conjugated polymer that showed high sensitivity and selectivity toward adenosine 5'-triphosphate (ATP). The macromolecular probe consisted of a polyfluorene backbone doped with 5 mol % 1,4-dithienylbenzothiadiazole (DBT) modified by bis-imidazolium and oligo(ethylene glycol) moieties. Solutions of the polymer emitted purple fluorescence, which changed to red upon addition of ATP molecules. The addition of ATP caused the polymer to aggregate, which enhanced fluorescence resonance energy transfer efficiency from the fluorene segments to DBT units, leading to an increase in red emission. The ratio of the fluorescence at these different wavelengths (I₆₅₅/I₄₂₃) showed a strong dependence on the ATP concentration. PF-DBT-BIMEG also exhibited high selectivity for ATP sensing over other representative anions and discriminated it from adenosine 5'-diphosphate (ADP) and adenosine 5'-monophosphate (AMP). This can be explained by the much stronger electrostatic interactions between the polymer and ATP than the interactions between the polymer and ADP or AMP, as confirmed through molecular dynamics simulations.

CdTe/CdSe quantum dot-based fluorescent aptasensor with hemin/G-quadruplex DNzyme for sensitive detection of lysozyme using rolling circle amplification and strand hybridization

Lysozyme with a small monomeric globular enzymatic protein is part of the innate immune system, and its deficiency can cause the increased incidence of disease. Herein, we devise a new signal-enhanced fluorescence aptasensing platform for quantitative screening of lysozyme by coupling with rolling circle amplification (RCA) and strand hybridization reaction, accompanying the assembly of CdTe/CdSe quantum dots (QDs) and hemin/G-quadruplex DNzyme. Initially, target-triggered release of the primer was carried out from DNA duplex via the reaction of the aptamer with the analyte, and the released primer could be then utilized as the template to produce numerous repeated oligonucleotide sequences by the RCA reaction. Following that, the formed long-stranded DNA simultaneously hybridized with the CdTe/CdSe QD-labeled probe and hemin/G-quadruplex DNzyme strand in the system, thereby resulting in the quenching of QD fluorescent signal through the proximity hemin/G-quadruplex DNzyme on the basis of transferring photoexcited conduction band electrons of quantum dots to Fe(III)/Fe(II)-protoporphyrin IX (hemin) complex. Under optimal conditions, the fluorescent signal decreased with the increasing target lysozyme within the dynamic range from 5.0 to 500nM with a detection limit (LOD) of 2.6nM at the 3s_blank criterion. Intra-assay and interassay coefficients of variation (CVs) were below 8.5% and 11.5%, respectively. Finally, the system was applied to analyze spiked human serum samples, and the recoveries in all cases were 85-111.9%.

Self-Assembly of Fluorescent Organic Nanoparticles for Iron(III) Sensing and Cellular Imaging

Fluorescent organic nanoparticles have attracted increasing attentions for chemical or biological sensing and imaging due to their low-toxicity, facile fabrication and surface functionalization. In this work, we report novel fluorescent organic nanoparticles via facile self-assembly method in aqueous solution. First, the designed water-soluble fluorophore shows a weak and negligible intrinsic fluorescence in water. Upon binding with adenosine-5'-triphosphate (ATP), fluorescent nanoparticles were formed immediately with strongly enhanced fluorescence. These fluorescent nanoparticles exhibit high sensitivity and selectivity toward Fe(3+) sensing with detection limit of 0.1 nM. In addition, after incubation with HeLa cells, the fluorophore shows excellent imaging performance by interaction with entogenous ATP in cells. Finally, this fluorescent system is also demonstrated to be capable of Fe(3+) sensing via fluorescence quenching in cellular environment.

An emission-tunable fluorescent organic molecule for specific cellular imaging

A color-tunable fluorescent molecule was synthesized and applied in specific lysosomal imaging.

Nanoparticles made of π-conjugated compounds targeted for chemical and biological applications

This feature article summarizes the recent applications of nanoparticles made of π-conjugated compounds in bio/chemo-sensing, disease therapy, and photoacoustic imaging.