Conjugated foldamers with unusually high space-charge-limited current hole mobilities

Red to orange thermally activated delayed fluorescence polymers based on 2-(4-(diphenylamino)-phenyl)-9H-thioxanthen-9-one-10,10-dioxide for efficient solution-processed OLEDs

Most highly efficient thermally activated delayed fluorescence (TADF)-based organic light-emitting diodes (OLEDs) are multi-layer devices fabricated by thermal vacuum evaporation techniques, which are unfavorable for real applications. However, there are only a few reported examples of efficient solution-processed TADF OLEDs, in particular TADF polymer OLEDs. Herein, a series of solution-processable TADF conjugated polymers (PCTXO/PCTXO-Fx (x = 25, 50 and 75)) were designed and synthesized by copolymerization of 2-(4-(diphenylamino)-phenyl)-9H-thioxanthen-9-one-10,10-dioxide (TXO-TPA) as a red/orange emissive TADF unit, 9,9'-((fluorene-9,9-diyl)-bis(octane-8,1-diyl))-bis(3,6-di-tert-butylcarbazole) as host/hole-transporting unit and 2,7-N-(heptadecan-9-yl)carbazole as a conjugated linker and solubilizing group. They possessed a conjugated backbone with donor TPA-carbazole/fluorene moieties and a pendent acceptor 9H-thioxanthen-9-one-10,10-dioxide (TXO) forming a twisted donor-acceptor structure. These polymers in neat films displayed red/orange color emissions (601-655 nm) with TADF properties, proved by theory calculations and transient PL decay measurements. Their hole-transporting capability was improved when the content of 9,9'-((fluorene-9,9-diyl)-bis(octane-8,1-diyl))-bis(3,6-di-tert-butylcarbazole) within the polymers increased. All polymers were successfully employed as emitters in solution-processed OLEDs. In particular, the doped OLED fabricated with PCTXO exhibited an intense deep orange emission at 603 nm with the best electroluminescence performance (a maximum external quantum efficiency 10.44%, a maximum current efficiency of 14.97 cd A-1 and a turn-on voltage of 4.2 V).

Influence of Positional Isomerism on the Chiroptical Properties of Functional Aromatic Oligoamide Foldamers

A series of functionalized quinoline-based aromatic oligoamide foldamers were prepared in their two enantiomeric forms, comprising an enantiopure terminal camphanyl chiral inducer, which governed the adjacent (P-/M-) helical-handedness. Hierarchical chirality transfer was further investigated in chromophore-appended variants via a range of electronic and vibrational spectroscopic techniques, including circularly polarized luminescence, vibrational circular dichroism and fluorescence. Intense total and polarized photoluminescence (up to Φ_lum =0.39, g_lum =1.5×10^-3 ) was observed in the visible region from these modular multicomponent architectures and a significant influence of positional isomerism was evidenced. The optimal position of a fluorophore substituent on the quinoline hexamers was determined as being position 2 over position 6, as stronger chiroptical features were systematically observed with the 2-positioned derivatives.

Synthesis and Optical Properties of Triphenylene-Based Donor-Donor and Donor-Acceptor Conjugated Polymers: A Comparative Study

Two new conjugated polymers (P1 and P2), containing a bithiophene donor unit coupled with either a triphenylene donor unit or an imide-functionalized triphenylene acceptor unit in the backbone, have been synthesized, structurally characterized, and comparatively studied by using 1H NMR, FT-IR, gel permeation chromatography, differential scanning calorimetry, cyclic voltammetry, ultraviolet-visible absorption, and fluorescence spectroscopy. Both polymers are amorphous in nature and thermally stable up to 450°C. The inclusion of the imide functionalization in the triphenylene unit significantly lowered the lowest unoccupied molecular orbital energy level and thus the bandgap of the donor-acceptor polymer P2 over the donor-donor polymer P1. P1 and P2 show very different optical properties in hexane and other solvents. P1 shows a broad emission in hexane but vibronically structured emissions in other solvents; in contrast, P2 exhibits a vibronically resolved emission in hexane, while exhibiting redshifted, broad, and featureless emissions in other solvents. P1 takes a random coil conformation in good solvents like p-xylene, benzene, toluene, anisole, chloroform, THF, and o-dichlorobenzene, whereas in hexane, it may adopt a helical folding conformation. In the poor solvent DMSO, interchain aggregates dominate. P2, on the other hand, adopts a random coil conformation in hexane but possibly the helical folding conformation in other good solvents. The opposite conformations of the two polymers may be responsible for their opposite solvent-dependent fluorescence properties. By virtue of the very different fluorescence properties of these two polymers in nonpolar solvents such as hexane and in polar solvents, the potential of using the polymers to detect the trace amount of ethanol content that is added to gasoline has been revealed with high sensitivity.

Quantitative Determination of the Vertical Segregation and Molecular Ordering of PBDB-T/ITIC Blend Films with Solvent Additives

The vertical component distribution of bulk heterojunction (BHJ) active film shows a significant impact on determining the device performance in polymer solar cells (PSCs). Processing solvent additives are well known for regulating the BHJ active layer morphology; however, there are few reports regarding the quantitative evaluation of the effect. Herein, a study of the quantitative determination of the vertical segregation in combination of molecular ordering of PBDB-T/ITIC blend films with various 1,8-diiodooctane (DIO) contents is provided. A 0.5% (volume ratio) DIO-added blend film achieves the highest power conversion efficiency of 10.75%. The reduced performance of the PSCs resulted from the excessive vertical component segregation and overcrystallization investigated by various techniques. X-ray photoelectron spectroscopy indicates that DIO aggravates the PBDB-T enrichment region at the air side. Neutron reflectivity further quantitatively figures out the phase separation effect. Although increased crystallinity of ITIC and a higher face-on ratio of PBDB-T in active layer were obtained with increased DIO content approved by grazing-incidence wide-angle X-ray scattering (GIWAXS), the enhanced vertical distribution along with the enhanced crystal size of ITIC leads to the reduced performance of the PSCs due to the reduced carrier transportation paths between donor and acceptor.

Polymeric Tubular Structures

Nature makes use of tubular structures for the spatial separation of matter on many different length scales, ranging from the nanometer scale (selective channels based on folded proteins) up to the centimeter scale (blood vessels). Today, polymer chemists and engineers can prepare polymeric tubular structures via a variety of different methods also covering many lengthscales, from nanometers to meters. The synthetic approaches described in this chapter vary significantly from the folding of single polymer chains via the self-assembly of DNA fragments to coordinative metal-organic nanotubes to tubes engineerd from bulk polymers using a range of porous or fibrous templates. While all examples reported in this chapter form tubular structures and thereby mimic their naturally occuring counterparts, it is mainly the engineered tubes that are more straightforward to prepare that also show some bio-inspired function.

Main-chain polyoxometalate-containing donor–acceptor conjugated copolymers: synthesis, characterization, morphological studies and applications in single-component photovoltaic cells

Single-component solar cells of main-chain polyoxometalate-containing donor–acceptor conjugated copolymers show efficiencies comparable to those conjugated polymers with covalently bonded fullerenes.

A simple strategy to the side chain functionalization on the quinoxaline unit for efficient polymer solar cells

A new tetrafluoridequinoxaline electron accepting block-ffQx from a quinoxaline core was designed. A new copolymer (PBDTT-ffQx) was synthesized from tetrafluoridequinoxaline and benzodithiophene and a high PCE of 8.6% was obtained.