Si/Ti2O3/Reduced Graphene Oxide Nanocomposite Anodes for Lithium-Ion Batteries with Highly Enhanced Cyclic Stability

Innovative Solutions for High-Performance Silicon Anodes in Lithium-Ion Batteries: Overcoming Challenges and Real-World Applications

Silicon (Si) has emerged as a potent anode material for lithium-ion batteries (LIBs), but faces challenges like low electrical conductivity and significant volume changes during lithiation/delithiation, leading to material pulverization and capacity degradation. Recent research on nanostructured Si aims to mitigate volume expansion and enhance electrochemical performance, yet still grapples with issues like pulverization, unstable solid electrolyte interface (SEI) growth, and interparticle resistance. This review delves into innovative strategies for optimizing Si anodes' electrochemical performance via structural engineering, focusing on the synthesis of Si/C composites, engineering multidimensional nanostructures, and applying non-carbonaceous coatings. Forming a stable SEI is vital to prevent electrolyte decomposition and enhance Li+ transport, thereby stabilizing the Si anode interface and boosting cycling Coulombic efficiency. We also examine groundbreaking advancements such as self-healing polymers and advanced prelithiation methods to improve initial Coulombic efficiency and combat capacity loss. Our review uniquely provides a detailed examination of these strategies in real-world applications, moving beyond theoretical discussions. It offers a critical analysis of these approaches in terms of performance enhancement, scalability, and commercial feasibility. In conclusion, this review presents a comprehensive view and a forward-looking perspective on designing robust, high-performance Si-based anodes the next generation of LIBs.

Scalable engineering of hierarchical layered micro-sized silicon/graphene hybrids via direct foaming for lithium storage

Low-cost micro-sized silicon is an attractive replacement for commercial graphite anodes in advanced lithium-ion batteries (LIBs) but suffers from particle fracture during cycling. Hybridizing micro-sized silicon with conductive carbon materials, especially graphene, is a practical approach to overcome the volume change issue. However, micro-sized silicon/graphene anodes prepared via the conventional technique encounter sluggish Li+ transport due to the lack of efficient electrolyte diffusion channels. Here, we present a facile and scalable method to establish efficient Li+ transport channels through direct foaming from the laminated graphene oxide/micro-sized silicon membrane followed by annealing. The conductive graphene layers and the Li+ transport channels endow the composite material with excellent electronic and ionic conductivity. Moreover, the interconnected graphene layers provide a robust framework for micro-sized silicon particles, allowing them to transform decently in the graphene layer space. Consequently, the prepared hybrid material, namely foamed graphene/micro-sized Si (f-G-Si), can work as a binder-free and free-standing anode without additives and deliver remarkable electrochemical performance. Compared with the control samples, micro-sized silicon wrapped by laminated graphene layers (G-Si) and commercial micro-sized Si, f-G-Si maximizes the utilization of silicon and demonstrates superior performance, disclosing the role of Li+ diffusion channels. This study sheds light on the rational design and manufacture of silicon anodes and beyond.

A novel route of colloidal chemistry: room temperature reactive interactions between titanium monoxide and silicon monoxide sols produced by laser ablation in liquid resulting in the formation of titanium disilicide

In spite of advanced research on functional colloidal inorganic nanoparticles and their reactivity, room temperature reactive interactions between two different colloids have remained challenging so far. Laser ablation of titanium monoxide and silicon monoxide in ethanol and water allows the generation of TiO-derived and SiO-derived colloidal nanoparticles which were characterized for their stability, size distribution and zeta potentials with dynamic light scattering and after evaporation of solvent examined for their morphology, chemical and phase composition by scanning electron microscopy, Raman spectroscopy, high resolution transmission electron microscopy and electron diffraction and small angle X-ray scattering. Aqueous and ethanolic TiO-derived colloids consist of anatase and monoclinic TiO, while ethanolic SiO-derived colloids are composed of crystalline and amorphous Si, nanocrystalline Si and SiO₂ and aqueous SiO-derived colloids contain, in addition to these phases, a high pressure form of cristobalite. Simple room temperature mixing of ethanolic TiO- and SiO-derived colloids allows the formation of TiSi₂, which is a case of so far unreported room temperature reactive interactions between two colloidal species. All colloids absorb solar light and act as photocatalysts for methylene blue degradation. These findings present a challenge for further search for feasible room-temperature reactions between distinct colloidal particles and open the potential for green synthesis of other desirable and hardly achievable phases.

Electrocatalytic Perchlorate Reduction Using an Oxorhenium Complex Supported on a Ti4O7 Reactive Electrochemical Membrane

An organometallic rhenium catalyst was deposited on a Ti₄O₇ reactive electrochemical membrane (Re/REM) for the electrocatalytic reduction of aqueous ClO₄^- to Cl^-. Results showed increasing ClO₄^- reduction upon increasing cathodic potential (i.e., -0.4 to-1.7 V/SHE). A 5 mM ClO₄^- solution was reduced by ∼21% in a single pass (residence time ∼0.2 s) through the Re/REM at a pH of 7, with >99% Cl^- selectivity and a current efficiency of ∼100%. Kinetic analysis indicated that the reaction rate constant increased from 3953 to 7128 L h^-1 g_Re^-1 at pH values of 9 to 3, respectively, and was mass transport-limited at pH < 5. The rate constants were 2 orders of magnitude greater than reported values for an analogous catalytic system using hydrogen as an electron donor. A continuous flow Re/REM system reduced 1 ppm ClO₄^- in a groundwater sample by >99.9% for the first 93.5 h, and concentrations were lower than the EPA ClO₄^- guideline (56 ppb) for 374 h of treatment. The fast ClO₄^- reduction kinetics and high chloride selectivity without the need for acidic conditions and a continual hydrogen electron donor supply for catalyst regeneration indicate the promising ability of the Re/REM for aqueous electrocatalytic ClO₄^- treatment.

Highly Stable Germanium Microparticle Anodes with a Hybrid Conductive Shell for High Volumetric and Fast Lithium Storage

The ability to realize a highly capacitive/conductive electrode is an essential factor in large-scale devices, requiring a high-power/energy density system. Germanium is a feasible candidate as an anode material of lithium-ion batteries to meet the demands. However, the application is constrained due to low charge conductivity and large volume change on cycles. Here, we design a hybrid conductive shell of multi-component titanium oxide on a germanium microstructure. The shell enables facile hybrid ionic/electronic conductivity for swift charge mobility in the germanium anode, revealed through computational calculation and consecutive measurement of electrochemical impedance spectroscopy. Furthermore, a well-constructed electrode features a high initial Coulombic efficiency (90.6%) and stable cycle life for 800 cycles (capacity retention of 90.4%) for a fast-charging system. The stress-resilient properties of dense microparticle facilitate to alleviate structural failure toward high volumetric (up to 1737 W h L^-1) and power density (767 W h L^-1 at 7280 W L^-1) of full cells, paired with highly loaded NCM811 in practical application.

Synergic effects of the decoration of nickel oxide nanoparticles on silicon for enhanced electrochemical performance in LIBs

Significant efforts continue to be directed toward the construction of anode materials with high specific capacity and long cycling stability for lithium-ion batteries (LIBs). In this context, silicon is preferred due to its high capacity even though it has a problem of excessive volume expansion during electrochemical reactions as well as poor cyclability due to a reduction in conductivity. Hence, the hybridization of silicon with suitable materials could be a promising approach to overcome the abovementioned problems. Herein, we demonstrate the uniform decoration of nickel oxide (NiO) nanoparticles (15-20 nm) on silicon nanosheets using bis(cyclopentadienyl) nickel(ii) (C₁₀H₁₀Ni) at low temperatures, taking advantage of the presence of two unpaired electrons in an antibonding orbital in the cyclopentadienyl group. The formation and growth mechanism are discussed in detail. The electrochemical study of the nanocomposite revealed an initial delithiation capacity of 2507 mA h g^-1 with a reversible capacity of 2162 mA h g^-1, having 86% retention and better cycling stability for up to 500 cycles. At the optimum concentration, NiO nanoparticles facilitate Li⁺-ion adsorption, which in turn accelerates the transport of Li⁺-ions to active sites of silicon. The Warburg coefficient and Li⁺-ion diffusion at the electrodes confirm the enhancement in the charge transfer process at the electrode/electrolyte interface with NiO nanoparticles. Further, the NiO nanoparticles with uniform distribution suppress the agglomeration of Si nanosheets and provide sufficient space to accommodate a volume change in Si during cycling, which also reduces the diffusion path length of the Li-ions. It also helps to strengthen the mechanical stability, which might be helpful in preventing the cracking of silicon due to volume expansion and maintains the Li-ion transport pathway of the active material, resulting in enhanced cycling stability. Due to the synergic effect between NiO nanoparticles and Si sheets, the nanocomposite delivers high reversible capacity.

Si nanoparticle clusters in hollow carbon capsules (SNC@C) as lithium battery anodes: toward high initial coulombic efficiency

Large volumetric expansion and structural pulverization have been major problems in Si-based anode materials for Li-ion batteries. To overcome this limitation, yolk-shell structured Si-carbon structures have been proposed to allow for the reversible structural breathing of Si nanoparticles confined inside the carbon shell. However, initial coulombic efficiency (ICE) of the yolk-shell structured anodes is highly decreased mainly due to their extremely high specific surface area (SSA) and the resulting excessive formation of solid electrolyte interphase (SEI) over the carbon shell. Here, instead of using a single Si nanoparticle-containing yolk-shell structure, we propose a novel structure comprising hollow carbon capsules internally encapsulating Si nanoparticle clusters (SNC@Cs). To implement this structural design, Si nanoparticle clusters are encompassed by a polystyrene matrix (SNC@PS) by emulsion polymerization, followed by coating with a polydopamine (PDA) layer (SNC@PS@PDA). Then, after annealing them for carbonization, SNC@Cs are finally prepared, which can decrease the SSA by a factor of one-third compared to the conventional yolk-shell structures. These SNC@C particles have shown remarkably high ICE values of up to 81%. Moreover, the cycling stability could be improved up to 100 cycles because the properly confined Si cluster inside the stable carbon capsule mitigates structural pulverization during repeated lithiation-delithiation processes of Si nanoparticles.

Mixed Titanium Oxide Strategy for Enhanced Photocatalytic Hydrogen Evolution

Titanium dioxide is a promising photocatalyst material for water splitting, but is limited by its low utilization of solar energy and rapid recombination of electron-hole pairs. Herein, a mixed titanium oxide strategy, utilizing TiO₂/Ti₂O₃ heterostructures consisting of in situ grown TiO₂ nanotubes with mixed anatase and rutile phases on bulk Ti₂O₃ materials, is demonstrated for efficient and recyclable hydrogen evolution from photocatalytic water splitting. Taking advantage of the formed heterostructures and the created porous structures, the photogenerated electrons from the conduction band of anatase TiO₂ can be first delivered to rutile TiO₂ and then transferred to Ti₂O₃. Meanwhile, the presence of Ti₂O₃ in TiO₂/Ti₂O₃ heterostructures can substantially promote the charge mobility and suppress the recombination of photogenerated electron-hole pairs. Hence, with a tuned band gap structure that enables rapid electron-hole separation, increased charge carrier density, and enhanced light absorption, the TiO₂/Ti₂O₃ heterostructures provide an enhanced photocatalytic hydrogen evolution rate as high as 1440 μmol g^-1 h^-1 under full-sunlight irradiation and without any other cocatalyst. This mixed titanium oxide strategy may open up new avenues for designing and constructing highly efficient TiO₂-based photocatalytic materials for various applications.

MnO@graphene nanopeapods derived via a one-pot hydrothermal process for a high performance anode in Li-ion batteries

Although transition metal oxide-carbon (TMO-C) composites exhibit high Li storage capacity, the weak bonding between TMO particles and carbon mainly via van der Waals' force and the limited internal void space result in poor rate capability and cycling performance. Herein, MnO@graphene nanopeapods are produced by calcination of hydrothermally-synthesized MnO2-C composites. The flexible graphene shells provide superior conductivity and excellent structural stability to the MnO cores, and the enough internal void space can significantly buffer the drastic volume expansion. The MnO@graphene nanopeapods exhibit high Li storage capacity (1168 mA h g-1 at 50 mA g-1 and 945 mA h g-1 at 500 mA g-1) at a voltage platform of ∼1.2 V, excellent rate capability (728 mA h g-1 at 1000 mA g-1 and 505 mA h g-1 at 3000 mA g-1), high initial coulombic efficiency (85.9%) and remarkable long-life cycling performance (undiminished after 1000 cycles). The MnO@graphene nanopeapods have been successfully used as the anode to assemble a full battery with LiFePO4 as the cathode. Our results provide a useful and rational strategy to design high performance graphene-supported MnO composites for Li ion batteries.

Carbonization/oxidation-mediated synthesis of MOF-derived hollow nanocages of ZnO/N-doped carbon interwoven by carbon nanotubes for lithium-ion battery anodes

Partial carbonization/oxidation-mediated treatment of ZIF-8 precursors generates hollow nanocages of ZnO/N-doped carbon for high performance lithium-ion battery anodes.

One-step mild fabrication of porous core-shelled Si@TiO2 nanocomposite as high performance anode for Li-ion batteries

Nanoporous Si@TiO₂ composites with the unique core-shell architecture are conveniently fabricated through one-step selective dealloying of SiTiAl ternary alloy under mild conditions. The as-prepared composites consist of bimodal Si network skeleton as the core and interconnected TiO₂ nanosponge layer as the shell uniformly distribute on the Si surface to form the porous core-shelled structure. The nanoporous TiO₂ as the outer protective layer not only reduce the violent volume change of electrode materials for stable cycling performance but also shorten the diffusion distance of Li⁺ for high rate capacities. The inner bimodal porous Si possesses an open bicontinuous network structure that can provide the enough empty space and robust backbone to relax the volume variation of composite and guarantee the sufficient electrode-electrolyte contact area. As a result, the optimized nanoporous Si@TiO₂ composite delivers the reversible capacity of 1338.1 and 1174.4 mA h g^-1 at the current densities of 200 and 1000 mA g^-1 after continuous tests for 120 and 100 cycles, respectively. With the advantages of easy preparation, unique architecture, and high lithium storage performances, the porous core-shelled Si@TiO₂ composites demonstrate the promising application potential as an anode material for LIBs.

Uniform small-sized MoS2 from novel solution-based microwave-assisted method with exceptional reversible lithium storage properties

Currently, MoS2 is being investigated as a lithium-ion battery (LIB) anode material because of its high theoretical capacity. However, its significantly low electrochemical activity and cyclic stability limit its utilization. Nevertheless, small-sized MoS2 possibly overcomes these issues. Herein, small-sized MoS2 with uniform particle sizes of about 20-30 nm was prepared via a novel solution-based microwave-assisted precursor pyrolysis method. The resultant MW-MoS2 sample has a high surface area of 96.9 m2 g-1 and large pore volume (0.38 cm3 g-1) with pore size distribution mainly in the meso/macropore scale, which are beneficial for electrolyte storage and low charge carrier conductive resistances. The large pore surface area and volume of the small-sized MoS2 can also ease the volume expansion during the charging and discharging process. As an LIB anode, the MW-MoS2 material exhibits an amazingly large specific capacity of 1355 mA h g-1 at a low current density of 0.5 A g-1. At a high current density of 10 A g-1, a specific capacity of 435 mA h g-1 is obtained, demonstrating its excellent rate capability. Furthermore, a large discharge capacity of 544 mA h g-1 is maintained after 500 cycles at 5 A g-1, indicating its fascinatingly high cyclic stability.

Group IVA Element (Si, Ge, Sn)-Based Alloying/Dealloying Anodes as Negative Electrodes for Full-Cell Lithium-Ion Batteries

To satisfy the increasing energy demands of portable electronics, electric vehicles, and miniaturized energy storage devices, improvements to lithium-ion batteries (LIBs) are required to provide higher energy/power densities and longer cycle lives. Group IVA element (Si, Ge, Sn)-based alloying/dealloying anodes are promising candidates for use as electrodes in next-generation LIBs owing to their extremely high gravimetric and volumetric capacities, low working voltages, and natural abundances. However, due to the violent volume changes that occur during lithium-ion insertion/extraction and the formation of an unstable solid electrolyte interface, the use of Group IVA element-based anodes in commercial LIBs is still a great challenge. Evaluating the electrochemical performance of an anode in a full-cell configuration is a key step in investigating the possible application of the active material in LIBs. In this regard, the recent progress and important approaches to overcoming and alleviating the drawbacks of Group IVA element-based anode materials are reviewed, such as the severe volume variations during cycling and the relatively brittle electrode/electrolyte interface in full-cell LIBs. Finally, perspectives and future challenges in achieving the practical application of Group IVA element-based anodes in high-energy and high-power-density LIB systems are proposed.

Supercritical Carbon Dioxide-Assisted Process for Well-Dispersed Silicon/Graphene Composite as a Li ion Battery Anode

The silicon (Si)/graphene composite has been touted as one of the most promising anode materials for lithium ion batteries. However, the optimal fabrication method for this composite remains a challenge. Here, we developed a novel method using supercritical carbon dioxide (scCO2) to intercalate Si nanoparticles into graphene nanosheets. Silicon was modified with a thin layer of polyaniline, which assisted the dispersion of graphene sheets by introducing π-π interaction. Using scCO2, well-dispersed Si/graphene composite was successfully obtained in a short time under mild temperature. The composite showed high cycle performance (1,789 mAh/g after 250 cycles) and rate capability (1,690 mAh/g at a current density of 4,000 mA/g). This study provides a new approach for cost-effective and scalable preparation of a Si/graphene composite using scCO2 for a highly stable lithium battery anode material.

Graphene oxide: strategies for synthesis, reduction and frontier applications

In this review article, we describe a general introduction to GO, its synthesis, reduction and some selected frontier applications. Its low cost and potential for mass production make GO a promising building block for functional hybrid materials.