Highly carbonylated cellulose nanofibrous membranes utilizing maleic anhydride grafting for efficient lysozyme adsorption

Cation-exchange performance of a citric-acid esterified cellulose nanofibrous membrane for highly-selective proteins' permeability and adsorption capacity

The usage of low-cost, readily available, or even disposable, single-use membranes in macromolecules' purification and separation is still in the development phase. In this research, highly porous (>95 %), water- and compression stable cation-exchange membranes were prepared by freeze-casting using cellulose nanofibrils (CNF) and citric acid (CA) acting as a crosslinker and source of weak anionic (carboxylic) surface groups arising from the mono-esterified CA. The membranes were characterized by different analytical techniques, and evaluated for the ionic adsorption efficacy of different proteins in dead-end filtration mode using a Tri-buffer of pH 8. The membrane's internal microstructure (porosity and density) with the available (quantity and access) carboxylic groups was confirmed, to determine not only the proteins' specific (related to the net charged and molecular weight) adsorption dynamic (>52 % of positive Lysozyme/Cytochrome, <8 % of negative BSA/Myoglobin; ≤0.5 g/L) at extremely high flow rates (>3.000 hL/h*MPa*m2), but also their desorption (>97 %) and re-equilibration (using NaCl) with flux recovery (>80 %). Such efficiency was achieved with up to 5 consecutive filtering cycles. The high permeability (>87 %) of the spherical and negatively surface charged microparticles (used as models) also suggests the likelihood of removing larger microbial species, which, while retaining relatively smaller and positively charged proteins, further increases their potential in biopharma applications.

Graft onto approaches for nanocellulose-based advanced functional materials

The resurgence of cellulose as nano-dimensional 'nanocellulose' has unlocked a sustainable bioeconomy for the development of advanced functional biomaterials. Bestowed with multifunctional attributes, such as renewability and abundance of its source, biodegradability, biocompatibility, superior mechanical, optical, and rheological properties, tunable self-assembly and surface chemistry, nanocellulose presents exclusive opportunities for a wide range of novel applications. However, to alleviate its intrinsic hydrophilicity-related constraints surface functionalization is inevitably needed to foster various targeted applications. The abundant surface hydroxyl groups on nanocellulose offer opportunities for grafting small molecules or macromolecular entities using either a 'graft onto' or 'graft from' approach, resulting in materials with distinctive functionalities. Most of the reviews published to date extensively discussed 'graft from' modification approaches, however 'graft onto' approaches are not well discussed. Hence, this review aims to provide a comprehensive summary of 'graft onto' approaches. Furthermore, insight into some of the recently emerging applications of this grafted nanocellulose including advanced nanocomposite formulation, stimuli-responsive materials, bioimaging, sensing, biomedicine, packaging, and wastewater treatment has also been reviewed.

Recent development and application of membrane chromatography

Membrane chromatography is mainly used for the separation and purification of proteins and biological macromolecules in the downstream processing process, also applications in sewage disposal. Membrane chromatography is recognized as an effective alternative to column chromatography because it significantly improves chromatography from affinity, hydrophobicity, and ion exchange; the development status of membrane chromatography in membrane matrix and membrane equipment is thoroughly discussed, and the applications of protein capture and intermediate purification, virus, monoclonal antibody purification, water treatment, and others are summarized. This review will provide value for the exploration and potential application of membrane chromatography.

Multifunctional cellulose paper-based materials and their application in complex wastewater treatment

The rapid and efficient treatment of complex wastewater remains challenging. Herein, green paper-based materials with high wet strength, good oil-water separation property and high heavy metal ion adsorption capacity were prepared via a facile, cost-effective process. The introduction of amphoteric functional groups not only met the requirements for heavy metal ion adsorption, but also maintained the stable underwater superoleophobic properties of materials a wide pH range. The covalent crosslinking between cellulose fibers induced by polyethyleneimine and citric acid significantly improved the wet strength (up to 26.0 Nm/g) and the porosity. The membrane flux was increased up to 3515 L/(m²·h) and the separation efficiencies were higher than 98%. Moreover, the theoretical maximum adsorption capacities for Cd(II) and Pb(II) reached 73.29 and 93.75 mg/g, respectively. Combined with filtration technology, the materials can realize the continuous and efficient purification of complex wastewater.

Cationic microcrystalline cellulose - Montmorillonite composite aerogel for preconcentration of inorganic anions from dairy wastewater

Development of efficient adsorbents to inorganic anions as a solid phase extraction (SPE) material is highly desirable for chromatographic analysis and pollution control. In this work we developed a new hybrid cationic microcrystalline cellulose aerogel composite. Cationic cetylpyridinium imbedded montmorillonite (CPC-MT) was uniformly entrapped in microcrystalline cellulose (MCC) to enhance anionic adsorption efficiency and mechanical stability. The developed CPC-MT@MCC aerogel was used as an SPE adsorbent for anions from dairy wastewater by coupling with ion-column chromatography. Further quaternized CPC-MT@MCC aerogel (CPC-MT@QMCC) showed unique low density (10.6 mg cm^-3), large specific surface area (320 m² g^-1), porosity 70%, 800 mg g^-1 nitrate adsorption capacity within 60 min and ease of elution in alkaline solutions. The CPC-MT@QMCC aerogel showed efficient regeneration and reuse performances for up to 10 cycles. More importantly, a dynamic binding efficiency of 710 mg g^-1 highlights its excellent performance for practical applications. 96% of nitrate anion from environmental manure wastewater samples were adsorbed with 98.7% recovery. A good linear relationship was obtained in the range of 0.01-10 mg L^-1 and the limits of detection was 0.5 mg L^-1 using CPC-MT@QMCC aerogel as a preconcentration column. The successful synthesis of such intriguing and economic CPC-MT@QMCC aerogel may provide a promising matrix for high-performance and high efficiency chromatographic media.

Cellulose-Based Nanofibers Processing Techniques and Methods Based on Bottom-Up Approach-A Review

In the past decades, cellulose (one of the most important natural polymers), in the form of nanofibers, has received special attention. The nanofibrous morphology may provide exceptional properties to materials due to the high aspect ratio and dimensions in the nanometer range of the nanofibers. The first feature may lead to important consequences in mechanical behavior if there exists a particular orientation of fibers. On the other hand, nano-sizes provide a high surface-to-volume ratio, which can have important consequences on many properties, such as the wettability. There are two basic approaches for cellulose nanofibers preparation. The top-down approach implies the isolation/extraction of cellulose nanofibrils (CNFs) and nanocrystals (CNCs) from a variety of natural resources, whereby dimensions of isolates are limited by the source of cellulose and extraction procedures. The bottom-up approach can be considered in this context as the production of nanofibers using various spinning techniques, resulting in nonwoven mats or filaments. During the spinning, depending on the method and processing conditions, good control of the resulting nanofibers dimensions and, consequently, the properties of the produced materials, is possible. Pulp, cotton, and already isolated CNFs/CNCs may be used as precursors for spinning, alongside cellulose derivatives, namely esters and ethers. This review focuses on various spinning techniques to produce submicrometric fibers comprised of cellulose and cellulose derivatives. The spinning of cellulose requires the preparation of spinning solutions; therefore, an overview of various solvents is presented showing their influence on spinnability and resulting properties of nanofibers. In addition, it is shown how bottom-up spinning techniques can be used for recycling cellulose waste into new materials with added value. The application of produced cellulose fibers in various fields is also highlighted, ranging from drug delivery systems, high-strength nonwovens and filaments, filtration membranes, to biomedical scaffolds.

Boronate-modified polyethyleneimine dendrimer as a solid-phase extraction adsorbent for the analysis of luteolin via HPLC

Luteolin (LTL) is a flavonoid containing a cis-diol, which has significant anti-inflammatory, anti-allergic, anti-diabetic, anti-cancer and neuroprotective activities. In this work, a silver modified boric acid affinity polyvinyl imine (PEI) dendritic adsorbent (PPEI-Ag@CPBA) was prepared on polystyrene (PS) for the rapid recognition and selective separation of LTL. A thin layer of polydopamine (PDA) was formed on the surface of the substrate by self-polymerization, and a PDA-coated PS material (PS@PDA) was obtained. PEI with sufficient active amino groups was grafted onto PS@PDA to obtain a PEI-modified material (PS@PDA@PEI), then AgNO3 was reduced with NaBH4, and PS@PDA@PEI was embedded on Ag. Finally, PPEI-Ag@CPBA was obtained through the condensation reaction of PEI with 4-carboxyphenyl boric acid (CPBA). The adsorption conditions were optimized, the optimal pH and the optimum amount of adsorbent were determined, and the maximum adsorption capacity was found to be 2.49 mg g-1. This method has been successfully applied to the selective identification of LTL in peanut shell samples, and provides a practical platform for the detection of LTL in complex substrates.

Adsorption and purification performance of lysozyme from chicken egg white using ion exchange nanofiber membrane modified by ethylene diamine and bromoacetic acid

A high-performance polyacid ion exchange (IEX) nanofiber membrane was used in membrane chromatography for the recovery of lysozyme from chicken egg white (CEW). The polyacid IEX nanofiber membrane (P-BrA) was prepared by the functionalization of polyacrylonitrile (PAN) nanofiber membrane with ethylene diamine (EDA) and bromoacetic acid (BrA). The adsorption performance of P-BrA was evaluated under various operating conditions using Pall filter holder. The results showed that optimal conditions of IEX membrane chromatography for lysozyme adsorption were 10% (w/v) of CEW, pH 9 and 0.1 mL/min. The purification factor and yield of lysozyme were 402 and 91%, respectively. The adsorption process was further scaled up to a larger loading volume, and the purification performance was found to be consistent. Furthermore, the regeneration of IEX nanofiber membrane was achieved under mild conditions. The adsorption process was repeated for five times and the adsorption capacity of adsorber was found to be unaffected.

Rapid removal of nitrate from liquid dairy manure by cationic poly (vinyl alcohol-co-ethylene) nanofiber membrane

Elevated levels of nitrate in surface water is a leading concern, which impacts human and animal health, and controlling it requires improved and sustainable methods capable of removing nitrate anions from source waste water to reduce nitrate anions transport to environment. In liquid dairy manure, nitrogen content can vary from 200 to 600 ppm and the transport of manure nitrogen into ambient water through hydrologic processes has a potential to exceed the maximum contaminant level limit (10 ppm) of nitrate nitrogen for regulated public water systems. Dairy manure is considered as a reservoir of nitrate. This research investigates on the determination of optimal designing of nanofiber membrane to remove nitrate anions from liquid dairy manure. A cationic poly (vinyl alcohol-co-ethylene) nanofiber membrane (EVOH) NFM was grafted via UV with 2-(methacryloyloxy) ethyl trimethylammonium chloride (DMAC) monomers. The adsorption efficiency of nitrate by the membrane was determined on liquid manure of dairy lagoons located in Central Valley of California. Initial nitrate concentrations in dairy manure varied from 75 to 100 ppm. Results showed that nitrate in dairy water was removed by 70% in 40 min. Tortuous structure and chemical stability of membrane resulted in nitrate dynamic binding capacity of 40 mg g^-1. Furthermore, it exhibits efficient reusability without significant changes in its performance using 0.5 M sodium hydroxide solution for nitrate desorption. Results showed that change in pH, and multi-anion conditions had limited effects on nitrate removal efficiency, and EVOH NFM can be a viable option to remove nitrate of liquid manure. This could be used for mitigating transport of excess nitrate from manure to environment. Overall, the results suggest that EVOH-g-DMAC NFM is efficient, low-cost (13 USD/m³) and recyclable material for sustainable removal of nitrate from dairy manure wastewater without requiring any ionic strength or pH adjustment.

Carboxylated cellulose cryogel beads via a one-step ester crosslinking of maleic anhydride for copper ions removal

In this study, we developed a one step protocol to prepare highly carboxylated and chemically crosslinked cellulose nanofibril (CNF) cryogel beads using maleic anhydride (MA). Fourier transform infrared spectroscopy (FTIR) and conductometric-potentiometric titration results confirmed the presence of carboxyl groups and ester linkages produced simultaneously during the ring open reaction of MA, yielding a carboxylic content of up to 2.78 mmol/g. The effect of CNF concentration on the morphology and wet mechanical strength of the crosslinked cryogel beads were also investigated, and results suggested that higher CNF concentration yielded a compact network that displayed a maximum compressive stress of 2800 Pa at 60 % strain. In addition, the heavy metal ions (i.e., Cu (II)) removal capacity, kinetics, mechanism as well as the recyclability of the resulted CNF-MA cryogel beads were examined.

Polymer-modified mesoporous silica microcubes (P@MSMCs) for the synergistic oxidative entrapment of Ag(i), Ti(iv), and Zn(ii) from natural river water

Herein, we demonstrate a hydrothermal route to the one-pot synthesis of polymeric mesoporous silica microcubes (P@MSMCs) for the adsorption of heavy metal ions. During the synthesis of P@MSMCs from column silica gel, the roles and combination of the polymer and an etchant were characterized. Moreover, the porosity of P@MSMCs was tailored by adjusting the reaction temperature between 75 °C and 200 °C. The characterization through UV, FTIR, FESEM, XRD, BET, and EDX techniques exhibited that P@MSMCs have a well-ordered mesoporous structure with cubic morphology. The P@MSMCs had a diameter of 2 μm, with an average pore volume and pore size of 0.69 cm3 g-1 and 10.08 nm, respectively. The results indicated that the P@MSMCs have excellent adsorption capacity for Ag(i), Ti(iv), and Zn(ii) due to the formation of an aggregated complex. These aggregations led to affordable density difference-based separation of these metal ions through centrifugation, filtration or simple decantation. The removal efficiencies for Ag(i), Ti(iv), and Zn(ii) were observed to be 520, 720, and 850 mg g-1, respectively. The kinetic studies demonstrated that the adsorption performance fitted well to the pseudo-second-order kinetic model. The as-synthesized P@MSMCs were stable in the wide pH range of 4-8. Significantly, the recycling or reuse results displayed effective adsorption performance of these P@MSMCs for up to 5 cycles. The adsorption results obtained herein will promote the development of similar strategies for the removal of heavy metal ions from natural water.

An aptasensor strip-based colorimetric determination method for kanamycin using cellulose acetate nanofibers decorated DNA-gold nanoparticle bioconjugates

The preparation of portable colorimetric biosensor strips is described by combining aptamer-immobilized electrospun nanofiber membranes (A-NFMs) with signal probes (DNA-conjugated gold nanoparticles (AuNPs)) for determination of kanamycin (KMC) as a model analyte. The A-NFMs were decorated with complementary single-stranded DNA (cDNA) of KMC aptamer-conjugated AuNPs (cDNA@Au) to get the colorimetric biosensor strips. The constructed biosensor strips showed a significant absorbance decreasing band at 510 nm which induce a visual color change from pink to white when exposed to KMC, with a low detection limit of 2.5 nM (at S/N = 3). The effect is due to disassembling of cDNA@Au from NFMs in the presence of KMC because the aptamer has a higher affinity to KMC than its complementary DNA, which resulted in replacing cDNA@Au with KMC. Satisfactory performance was observed in real sample (drinking water and milk) analysis with a recovery of 98.9-102.2%. The constructed colorimetric biosensor test strips hold great application promise for food safety control. Graphical abstract Schematic representation of biosensor strips for kanamycin detection prepared with the cDNA@Au immobilized aptamer-based cellulose acetate nanofibers.

The efficient removal of methylene blue from water samples using three-dimensional poly (vinyl alcohol)/starch nanofiber membrane as a green nanosorbent

In the present study, a simple, fast, and economical method was introduced to eliminate methylene blue from dye wastewater water using a non-toxic, inexpensive, stable, and efficient adsorbent. The poly (vinyl alcohol) (PVA)/starch hydrogel nanofiber membrane with high surface area and the three-dimensional structure was fabricated in water via electrospinning strategy, and the cross-linking reaction was done by thermal treatment. The characterization of the nanofibers was carried out using Fourier-transform infrared spectrometer (FT-IR) and field-emission scanning electron microscopy (FE-SEM), and the cross-linked PVA/starch nanofiber was applied as a membrane for the removal of methylene blue (MB). The recovery of MB was performed by methanol solution containing 5% (v/v) HCl. Langmuir isotherm model successfully described the adsorption of MB on nanosorbent, and the maximum adsorption capacity (q_m) was 400 mg g^-1. Also, the kinetic of adsorption was well fitted by the pseudo-second-order model. In this study, because of the high stability of fabricated membrane (based on the tensile testing), it can be used as a filter for the fast separation of MB (cationic dye) and methyl orange (MO, anionic dye). Graphical abstract.

Electrospun Nanobelt-Shaped Polymer Membranes for Fast and High-Sensitivity Detection of Metal Ions

Until now, no polymer nanobelt-shaped materials have been developed as electrochemical, optical, and mass sensors. In this work, we first develop polymer nanobelt-shaped membranes for fast and high-sensitivity detection of metal ions, which are fabricated by a new nanobelt-based processing method with simultaneous zein matrix cross-linking and curcumin cross-linking. Their morphologies, optimal detection pH, ion selectivity, and ion detection sensitivity are systematically analyzed. The limits of detection of electrospun curcumin-loaded zein membranes with a detection time of 0.5 h are as follows: cross-linked nanobelt-shaped membranes (0.3 mg/L) < uncross-linked nanobelt-shaped membranes (1 mg/L) ≈ cross-linked nanofibrous membranes (1 mg/L) < uncross-linked nanofibrous membranes (3 mg/L). The cross-linked nanobelt-shaped membranes are also applied to detect Fe³⁺ in drinking water and environmental water. Finally, the mechanisms of Fe³⁺ detection by these membranes are studied and discussed. The results demonstrate that the difference of limit of detection is dependent on if the curcumin sensor is cross-linked or not and the membrane nanostructures (nanobelts or nanofibers). Cross-linking produces stable sensor molecules on the surface and therefore induces low limits of detection. Compared with nanofibers, nanobelts have a higher surface-to-volume ratio and can have more sensor molecules on their surfaces and therefore have lower limits of detection. In addition, the as-prepared membranes had good membrane storage stability (at least 3 months at room temperature). All of these results suggest that cross-linked electrospun nanobelt-shaped membranes by a new nanobelt-based processing method are ideal platforms for sensing. We believe that they will attract increasing attention in scientific and engineering fields such as materials, environmental, and food science.

Topochemical engineering of composite hybrid fibers using layered double hydroxides and abietic acid

Topochemical engineering of hybrid materials is an efficient way of synthesizing hydrophobic and highly tensile fiber composites by utilizing the intermolecular hydrogen bonds in natural materials. These materials include wood pulp fibers, abietic acid (resin acid) and inexpensive metal salts. In this work, a hybrid composite was created using bleached and unbleached kraft pulp fibers as cellulose platform. In situ co-precipitation of layered double hydroxide (LDH) was performed to grow LDH crystals on the surface of the cellulose fibers, followed by the immobilization of abietic acid (AA) on LDH-grafted cellulose. Here we aimed to benefit from the hydrogen bonding between -OH groups of cellulose and LDH, and the -COOH groups of AA to obtain charge-directed assembly of one material on the other material. Thus, composite hybrid fibers (C-HF) were produced and then characterized by optical (CAM), spectroscopic (XRD, IR) and microscopic techniques (SEM) to determine their average length and distribution, structure and purity, bonding, and morphology. These fibers further were tested for water contact angle (hydrophobicity), oil absorption (lipophilicity), tensile strength and ISO brightness measurements. The performance of C-HF was compared with unmodified reference fibers (REF), fibers composed with only AA (C-F) and LDH-hybridized fibers (HF). The results revealed a variety of correlations between materials and their properties due to characteristic surface morphology, functional groups, hydrogen bonding and natural co-materials such as lignin and hemicelluloses. Attractive and repulsive van der Waals forces between material entities play a crucial role in the resulting properties.

A green approach to obtain stable and hydrophilic cellulose-based electrospun nanofibrous substrates for sustained release of therapeutic molecules

Stable and (bio)-compatible nanofibrous matrices showing effective incorporation and release of nonsteroidal anti-inflammatory drugs (NSAIDs) hold a huge potential in tissue regeneration and wound healing.

In Situ Growth of ZIF-8 on PAN Fibrous Filters for Highly Efficient U(VI) Removal

Global environmental challenges especially nuclear pollution pose a great threat to human health and public safety. Metal-organic frameworks (MOFs) with high surface area and excellent stability are potential candidates for the remediation of nuclear pollution. Herein, a ZIF-8-based polyacrylonitrile (PAN) fibrous filter was prepared by an in situ hydrothermal treatment of fibrous filters consisting of PAN, poly(vinylpyrrolidone) (PVP), and zinc ions with an electrospinning method. In the process of hydrothermal treatment, PVP can be extracted from the PAN nanofibers and result in porous structures. Benefiting from these porous structures, the in situ ZIF-8/PAN filters demonstrated a high adsorption capacity of U(VI) (530.3 mg g^-1 at pH = 3.0). The extended X-ray absorption fine structure revealed that the adsorption mechanism demonstrated surface complexation between U(VI) and 2-methylimidazole. Furthermore, the adsorption device was fabricated, and the dynamic adsorption shows that in situ ZIF-8/PAN is a promising material for treating the nuclear wastewater. The present work may provide a new strategy to fabricate MOFs into functional devices to remediate the increasing global environmental concerns.

Selective adsorption of globulin on nanofiber meshes for immunoadsorption therapy

Cost-effective development of a carboxylated EVOH nanofiber mesh to adsorb γ-globulin selectively for immunoadsorption therapy.

Synthesis of Cellulose-graft-Polypropionic Acid Nanofiber Cation-Exchange Membrane Adsorbers for High-Efficiency Separations

Fabrication of membrane adsorbers with elevated binding capacity and high throughput is highly desired for simplifying and improving purification efficiencies of bioproducts (biotherapeutics, vaccines, etc.) in the biotechnological and biopharmaceutical industries. Here we demonstrate the preparation of a novel class of self-supported, cellulose-graft-polypropionic acid (CL-g-PPA) cation-exchange nanofiber membrane adsorbers under mild reaction conditions for the purification of positively charged therapeutic proteins. In our fabrication method, acrylonitrile was first polymerized and surface grafted onto cellulose nanofibers using cerium ammonium nitrate as a redox initiator to form cellulose-g-polyacrylonitrile (CL-g-PAN). CL-g-PAN was then submitted to a hydrolyzation reaction to form CL-g-PPA cationic membrane adsorbers. Morphology and structural characterization illustrated the formation of CL-g-PPA membranes with uniform coating of polyacid nanolayers along the individual nanofibers without disturbing the nanofiber structure. Benefiting from these numerous cationic polyacid binding sites and inherent large surface area and open porous structure, CL-g-PPA nanofiber membrane adsorbers showed a lysozyme static adsorption capacity of 1664 mg/g of nanofibers. These membranes showed a lysozyme dynamic binding capacity of 508 mg/g of nanofibers at 10% breakthrough (equivalent to 206 g/L capacity), with a residence time of less than 6 s. Moreover, CL-g-PPA self-supported nanofibers displayed excellent structural stability and reversibility after several cycles of protein binding studies. This dynamic binding capacity of the CL-g-PPA nanofiber membranes was 3.2 times higher than that of macroporous cellulose membranes and 8.5 times higher than that of the Sartobind S commercial membrane adsorber. Considering the simple fabrication method employed, excellent protein adsorption capacity, remarkable structural stability, and reusability, CL-g-PPA nanofiber membranes provided a versatile platform for the chromatographic separations of biomolecules (e.g., proteins, nucleic acids, and viral vaccines) as well as water purification and similar ion-exchange applications.

Two Are Better than One: Halloysite Nanotubes-Supported Surface Imprinted Nanoparticles Using Synergy of Metal Chelating and Low pKa Boronic Acid Monomers for Highly Specific Luteolin Binding under Neutral Condition

Surface-imprinted nanoparticles with double recognition (DM-MIPs) are fabricated onto halloysite nanotubes (HNTs) for highly specific separation of natural flavone luteolin (LTL) under neutral condition. Specifically, a two-step strategy via consecutive surface-initiated atom transfer radical polymerization (SI-ATRP) is employed to introduce inherent recognition of molecular imprinting and reversible covalent affinity of boronic acid ligands and immobilized Zn²⁺ into DM-MIPs. First, Zn²⁺-immobilized poly(vinyl imidazole) (PVLD) shell based on the HNTs via the first SI-ATRP is prepared to capture LTL by metal chelating. Then HNTs-supported surface imprinted nanoparticles are prepared using low pK_a boronic acid monomer 4-(2-acrylamidoethylcarbamoyl)-3-fluorophenylboronic acid (AMC-FPBA) via the second SI-ATRP. Taking advantage of low apparent pK_a of AMC-FPBA and large high-affinity binding site density, DM-MIPs possess a promising binding with cis-diol-containing LTL under neutral condition. In static adsorption, DM-MIPs show large LTL loading amount (83.42 mg g^-1), fast capture kinetics, remarkable selectivity, and excellent recyclability at pH = 7.0. More importantly, by reducing the pH to 4.0, the loaded TLL can be simply released. As a proof of this concept, a commercially available LTL with 85% purity can be easily enriched and further purified, and the product exhibits the similar antibacterial performance with standard substance.

Nano silver-embedded electrospun nanofiber of poly(4-chloro-3-methylphenyl methacrylate): use as water sanitizer

Water contaminated with microorganisms causes numerous diseases and is a major concern for public health. In search of a simple material which can provide clean water free from pathogens, nanofibers of poly(4-chloro-3-methylphenyl methacrylate, abbreviated as CMPMA, and nano Ag-doped poly(CMPMA) composite nanofibers were used to decontaminate water from microorganisms such as Escherichia coli and Bacillus subtilis. Nanofibers were prepared by electrospinning. X-ray diffraction (XRD) and transmission electron microscopy (TEM) provide the diameters of the Ag nanoparticles which are in the range 18-21 and 13-18 nm. The diameter of the poly(CMPMA) and nano Ag-doped poly(CMPMA) composite nanofiber is seen to vary between 400 and 700 nm with the change of the processing parameters. Optimum parameters for uniform nanofibers have been obtained. The morphology of the fibers is derived from scanning electron microscopy (SEM). The superiority of the nano Ag-doped poly(CMPMA) composite nanofiber was established.

Dye-Affinity Nanofibrous Membrane for Adsorption of Lysozyme: Preparation and Performance Evaluation

Polyacrylonitrile (PAN) nanofibrous membrane was prepared by an electrospinning technique. After heat treatment and alkaline hydrolysis, the weak ion exchange membrane was grafted with chitosan molecule and then covalently immobilized with a Cibacron Blue F3GA (CB). Fibre diameter, porosity and pore size of the membrane and immobilized dye density were characterized. Furthermore, the membrane was applied to evaluate the binding performance of lysozyme under various operating parameters (pH, chitosan mass per volume ratio, dye concentration, ionic strength and temperature) in batch mode. The experimental results were directly applied to purify lysozyme from chicken egg white by membrane chromatography. The results showed that the capture efficiency, recovery yield and purification factor were 90 and 87%, and 47-fold, respectively, in a single step. The binding capacity remained consistent after five repeated cycles of adsorption-desorption operations. This work demonstrates that the dye-affinity nanofibrous membrane holds great potential for purification of lysozyme from real feedstock.

Synthesis of human hair fiber-impregnated chitosan beads functionalized with citric acid for the adsorption of lysozyme

Herein, a novel CA-CS/HHF composite was firstly constructed by impregnating human hair fiber into a CS matrix and then functionalized with citric acid.

Flexible Hierarchical ZrO2 Nanoparticle-Embedded SiO2 Nanofibrous Membrane as a Versatile Tool for Efficient Removal of Phosphate

Functional nanoparticles modified silica nanofibrous materials with good flexibility, a hierarchical mesoporous structure, and excellent durability would have broad applications in efficient removal of contaminants, yet have proven to be enormously challenging to construct. Herein, we reported a strategy for rational design and fabricating flexible, hierarchical mesoporous, and robust ZrO₂ nanoparticle-embedded silica nanofibrous membranes (ZrO₂/SiO₂ NM) for phosphate removal by combining the chitosan dip-coating method with the electrospinning technique. Our approach allows ZrO₂ nanoparticles to be in situ firmly and uniformly anchored onto SiO₂ nanofibers to drastically enlarge the specific surface area and porosity of membranes. Therefore, the resultant ZrO₂/SiO₂ NM exhibited a prominent removal efficiency of 85% and excellent adsorption amount of 43.8 mg P g^-1 membranes in 30 min toward phosphates. Furthermore, the removal performance toward different types of phosphates revealed that the resultant membranes also could be used to remove phosphates in detergent and fertilizer water samples. More importantly, the membranes with good flexibility could directly be taken out from solution after use without any post-treatment. Such a simple and intriguing approach for fabricating nanofibrous membranes may provide a new platform for constructing membranes with superb phosphate removal performance.

Scalable Fabrication of Electrospun Nanofibrous Membranes Functionalized with Citric Acid for High-Performance Protein Adsorption

Fabricating protein adsorbents with high adsorption capacity and appreciable throughput is extremely important and highly desired for the separation and purification of protein products in the biomedical and pharmaceutical industries, yet still remains a great challenge. Herein, we demonstrate the synthesis of a novel protein adsorbent by in situ functionalizing eletrospun ethylene-vinyl alcohol (EVOH) nanofibrous membranes (NFM) with critic acid (CCA). Taking advantage of the merits of large specific surface area, highly tortuous open-porous structure, abundant active carboxyl groups introduced by CCA, superior chemical stability, and robust mechanical strength, the obtained CCA-grafted EVOH NFM (EVOH-CCA NFM) present an excellent integrated protein (take lysozyme as the model protein) adsorption performance with a high capacity of 284 mg g(-1), short equilibrium time of 6 h, ease of elution, and good reusability. Meanwhile, the adsorption performance of EVOH-CCA NFM can be optimized by regulating buffer pH, ionic strength, and initial concentration of protein solutions. More importantly, a dynamic binding efficiency of 250 mg g(-1) can be achieved driven solely by the gravity of protein solution, which matches well with the demands of the high yield and energy conservation in the actual protein purification process. Furthermore, the resultant EVOH-CCA NFM also possess unique selectivity for positively charged proteins which was confirmed by the method of sodium dodecyl sulfate polyacrylamide gel electrophoresis. Significantly, the successful synthesis of such intriguing and economic EVOH-CCA NFM may provide a promising candidate for the next generation of protein adsorbents for rapid, massive, and cost-effective separation and purification of proteins.

Porous aerogels prepared by crosslinking of cellulose with 1,4-butanediol diglycidyl ether in NaOH/urea solution

The cellulose aerogels were prepared by crosslinking of cellulose with 1,4-butanediol diglycidyl in NaOH/urea aqueous solution.

Synthesis of β-Cyclodextrin-Based Electrospun Nanofiber Membranes for Highly Efficient Adsorption and Separation of Methylene Blue

Water-insoluble β-cyclodextrin-based fibers were synthesized by electrospinining followed by thermal cross-linking. The fibers were characterized by field-emission scanning electron microscopic (FE-SEM) and Fourier transformed infrared spectrometer (FT-IR). The highly insoluble fraction obtained from different pH values (3-11) indicates successful cross-linking reactions and their usability in aqueous solution. After the cross-linking reaction, the fibers' tensile strength increases significantly and the BET surface area is 19.49 m(2)/g. The cross-linked fibers exhibited high adsorption capacity for cationic dye methylene blue (MB) with good recyclability. The adsorption performance can be fitted well with pseudo-second-order model and Langmuir isotherm model. The maximum adsorption capacity is 826.45 mg/g according to Langmuir fitting. Due to electrostatic repulsion, the fibers show weak adsorption toward negatively charged anionic dye methyl orange (MO). On the basis of the selective adsorption, the fiber membrane can separate the MB/MO mixture solution by dynamic filtration at a high flow rate of 150 mL/min. The fibers can maintain good fibrous morphology and high separation efficiency even after five filtration-regeneration cycles. The obtained results suggested potential applications of β-cyclodextrin-based electrospun fibers in the dye wastewater treatment field.