Tuning Phase Composition of TiO2 by Sn(4+) Doping for Efficient Photocatalytic Hydrogen Generation

Hydrazine-Assisted Synthesis, Structures, Photoelectricity, and Photocatalysis of Ternary Mercury-Tellurostannate Hybrids with Transition-Metal Complexes

Tellurostannates are traditionally prepared by multistep reactions using the tellurides SnTe, SnTe2, K4SnTe4, or A6SnTe6 (A = K, Rb, or Cs) as precursors, which are usually prepared by the molten reaction of alkali metals Sn and Te under harsh synthetic conditions. Differently, ternary Hg-tellurostannate hybrids [Mn(en)3]HgSnTe3(Te2) (1) (en = ethylenediamine), [Mn(dien)2]HgSnTe3(Te2) (2), and [Fe(dien)2]HgSnTe3(Te2) (3) (dien = diethylenetriamine) were synthesized by one-pot reactions using Sn and Te powders as starting materials in the presence of hydrazine under mild solvothermal conditions. In 1, HgTe3 and SnTe4 units are joined via Te-sharing to form a 1-D polymeric chain [HgSnTe3(Te2)]n2n-, while the [HgSnTe3(Te2)]n2n- chains in 2 and 3 are composed of HgTe4 and SnTe4 units. The common feature of the [HgSnTe3(Te2)2-]n chains in 1-3 is that they are constructed by both the telluride anion Te2- and the polytelluride anion Te22-. 1-3 exhibited strong photocurrent responses with current densities of 5.26, 3.38, and 3.94 μA cm-2, respectively. They showed effective photocatalytic activities for methylene blue degradation with degradation ratios in the range of 85.3-94.6% after light irradiation for 80 min. Investigation of the photocatalytic mechanism showed that •O2- radicals and h+ holes were the main active substances in the photodegradation.

Shining light on transition metal sulfides: New choices as highly efficient antibacterial agents

Globally, millions of people die of microbial infection-related diseases every year. The more terrible situation is that due to the overuse of antibiotics, especially in developing countries, people are struggling to fight with the bacteria variation. The emergence of super-bacteria will be an intractable environmental and health hazard in the future unless novel bactericidal weapons are mounted. Consequently, it is critical to develop viable antibacterial approaches to sustain the prosperous development of human society. Recent researches indicate that transition metal sulfides (TMSs) represent prominent bactericidal application potential owing to the meritorious antibacterial performance, acceptable biocompatibility, high solar energy utilization efficiency, and excellent photo-to-thermal conversion characteristics, and thus, a comprehensive review on the recent advances in this area would be beneficial for the future development. In this review article, we start with the antibacterial mechanisms of TMSs to provide a preliminary understanding. Thereafter, the state-of-the-art research progresses on the strategies for TMSs materials engineering so as to promote their antibacterial properties are systematically surveyed and summarized, followed by a summary of the practical application scenarios of TMSs-based antibacterial platforms. Finally, based on the thorough survey and analysis, we emphasize the challenges and future development trends in this area.

Tunable Composition Aqueous-Synthesized Mixed-Phase TiO2 Nanocrystals for Photo-Assisted Water Decontamination: Comparison of Anatase, Brookite and Rutile Photocatalysts

Mixed-phase nanoTiO2 materials attract a lot of attention as advanced photocatalysts for water decontamination due to their intrinsic structure that allows better photo-excited e−cb-h+vb charge separation, hence improved photocatalytic efficiency. Currently, the best-known mixed-phase TiO2 photocatalyst is P25 with approximate composition 80% Anatase/20% Rutile (A/r). Apart from Anatase (A) and Rutile (R) phases, there is Brookite (B) which has been evaluated less as photocatalyst in mixed-phase nanoTiO2 systems. In this work we present a sustainable solution process to synthesize tunable composition mixed-phase nanotitania photocatalysts in a continuously stirred tank reactor (CSTR) by modulating conditions like pH, CTiCl4 and time. In particular three mixed-phase TiO2 nanomaterials were produced, namely one predominantly anatase with brookite as minor component (A/b), one predominantly brookite with minor component rutile (B/r), and one predominantly rutile with minor component brookite (R/b) and evaluated as photocatalysts in the degradation of methyl orange. The three semiconducting nanomaterials were characterized by XRD and Raman spectroscopy to quantify the phase ratios and subjected to nano-morphological characterization by FE-SEM and TEM/HR-TEM. The new mixed-phase nanoTiO2 materials are shown to be endowed with large specific surface area, ranging from 90–125 m2 g−1, double of that of P25, to be mesoporous and be surface-rich in Ti–OH molecular groups varying from 12%–20% versus 4% for P25. These properties though impact the adsorptive capacity with R/b and B/r removing > 50% of MO but not photocatalytic activity. The latter depends on nanograined mixed-phase structure and not mere assembly of different phase nanoparticles. First-order rate constants reveal essentially equivalent photocatalytic activity for anatase nanocrystals with either rutile (P25) or brookite (this work) domains.

Partially disordered TiO2 nanotube photonic crystal: randomness characterization and tuning of reflected scattering light

Introducing disorder into a periodic nanostructure can lead to specific optical behaviors. We present a method of anodic oxidation by adjusting the applied voltage and process time to introduce disorder to TiO₂ nanotubes. The surface morphology of TiO₂ was numerically investigated according to the morphologies measured with a scanning electron microscope by imaging processing and a statistical method. TiO₂ nanotubes obtained under different fabrication conditions have various tube radii ranging from 20-40 nm and wall thicknesses ranging from 20-70 nm. We also evaluated the degree of disorder of the tube radius of the TiO₂ nanotubes. The reflected scattering light distributions of laser sources were optically measured at different observing distances, which indicate that the presence of nanotubes enhances the scattering effect, reducing the scattered light intensity by more than 75%, and provide the relationship between the scattering effect and surface morphology of nanotubes. This discovery offers TiO₂ nanotubes important application prospects in optical limiting and light confinement, such as stealth coating.

Recent advances and strategies to tailor the energy levels, active sites and electron mobility in titania and its doped/composite analogues for hydrogen evolution in sunlight

Hydrogen production through photocatalytic water reduction, a potential path for future renewable and sustainable energy generation.

Efficient Visible-Light-Driven CO2 Reduction Mediated by Defect-Engineered BiOBr Atomic Layers

Solar CO₂ reduction efficiency is largely limited by poor photoabsorption, sluggish electron-hole separation, and a high CO₂ activation barrier. Defect engineering was employed to optimize these crucial processes. As a prototype, BiOBr atomic layers were fabricated and abundant oxygen vacancies were deliberately created on their surfaces. X-ray absorption near-edge structure and electron paramagnetic resonance spectra confirm the formation of oxygen vacancies. Theoretical calculations reveal the creation of new defect levels resulting from the oxygen vacancies, which extends the photoresponse into the visible-light region. The charge delocalization around the oxygen vacancies contributes to CO₂ conversion into COOH* intermediate, which was confirmed by in situ Fourier-transform infrared spectroscopy. Surface photovoltage spectra and time-resolved fluorescence emission decay spectra indicate that the introduced oxygen vacancies promote the separation of carriers. As a result, the oxygen-deficient BiOBr atomic layers achieve visible-light-driven CO₂ reduction with a CO formation rate of 87.4 μmol g^-1  h^-1 , which was not only 20 and 24 times higher than that of BiOBr atomic layers and bulk BiOBr, respectively, but also outperformed most previously reported single photocatalysts under comparable conditions.

Three-dimensionally ordered macroporous Sn4+-doped TiO2 with anatase–rutile mixed phase via Pt loading by photoreduction method: enhanced photodegradation and hydrogen production performance

3DOM Pt/Sn–TiO₂ with anatase–rutile mixed phase was successfully prepared by the colloidal crystal template method and the photoreduction method. A series of photocatalytic experiments showed that 3DOM Pt/Sn–TiO₂ exhibited significant photocatalytic activity in photodegradation and water splitting.

Sensitization of Pt/TiO2 Using Plasmonic Au Nanoparticles for Hydrogen Evolution under Visible-Light Irradiation

Au nanoparticles with different sizes (10, 20, 30, and 50 nm) were synthesized using a seed-assisted approach and anchored onto Pt/TiO₂ employing 3-mercaptopropionic acid as the organic linker. The sizes of the Au nanoparticles were controlled within a narrow range so that the size-dependent surface plasmonic resonance effect on sensitizing Pt/TiO₂ can be thoroughly studied. We found that 20 nm Au nanoparticles (Au₂₀) gave the best performance in sensitizing Pt/TiO₂ to generate H₂ under visible-light illumination. Photoelectrochemical measurements indicated that Au₂₀-Pt/TiO₂ exhibited the most efficient "hot" electrons separation among the studied catalysts, correlating well with the photocatalytic activity. The superior performance of Au-supported Pt/TiO₂ (Au₂₀-Pt/TiO₂) compared with Au anchored to TiO₂ (Au₂₀/TiO₂) revealed the important role of Pt as a cocatalyst for proton reduction. To elucidate how the visible-light excited hot electrons in Au nanoparticles involved in the proton-reduction reaction process, Au₂₀/TiO₂ was irradiated by visible light (λ > 420 nm) with the presence of Pt precursor (H₂PtCl₆) in a methanol aqueous solution under deaerated condition. Energy-dispersive X-ray spectroscopy mapping analysis on the recovered sample showed that Pt ions could be reduced on the surfaces of both Au nanoparticles and TiO₂ support. This observation indicated that the generated hot electrons on Au nanoparticles were injected into the TiO₂ conduction band, which were then subsequently transferred to Pt nanoparticles where proton reduction proceeded. Besides, the excited hot electrons could also participate in the proton reduction on Au nanoparticles surface.

In situ doping of Pt active sites via Sn in double-shelled TiO2 hollow nanospheres with enhanced photocatalytic H2 production efficiency

A Sn⁴⁺-doped double-shelled Pt/TiO₂ hollow nanocatalyst (DHS-SnPt) with excellent photocatalytic H₂ production efficiency was prepared successfully via a facile hydrothermal method.

Dominant {100} facet selectivity for enhanced photocatalytic activity of NaNbO3 in NaNbO3/CdS core/shell heterostructures

Facet-selective synthesis of NaNbO₃ crystals in cubic and orthorhombic phases and enhanced photocatalytic activity depending on the surface energy of the facets.