Highly Resolved Nanostructured PEDOT on Large Areas by Nanosphere Lithography and Electrodeposition

Water-Writing Pattern on PEDOT:PSS Inverse Opal Films through the Synergistic Effect of Morphology/Conformation Transition

Poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) has received tremendous attention in the energy field owing to its high conductivity, ease of processing, biocompatibility, and low cost-effectiveness. Combining PEDOT:PSS and photonic crystals (PCs) is expected to promote the development of high-performance optoelectronic devices. The conductivity of PEDOT:PSS at present can only be measured through specific equipment, and the visualization of optoelectronic integration still remains a challenge. In this study, various patterned PEDOT:PSS inverse opal (PEDOT:PSS-IO) films are constructed by associating the conductivity of PEDOT:PSS with the structural color of PCs based on the synergistic effect of morphology/conformation transition, which achieves the visualization of optoelectronic integration. Morphology transition of the PEDOT:PSS-IO film alters from the interconnected to gradual closure pore structure, accompanied by an unusual blueshift of the stopband, which can be attributed to the collapse/reconstruction of the frame of the PEDOT:PSS-IO film. Conformation transition of PEDOT chains converts from the benzene to quinone structure, accompanying an enhancement of conductivity, which resulted from PSS removal and secondary doping. Under the induction of a polar solvent, the PEDOT:PSS-IO film brings the changes in optical/electrical dual-signals based on the synergistic effect of morphology/conformation transition. This phenomenon can be developed for the creation of a conductive PC pattern by using a polar solvent (water) as an ink, which is beneficial for the visualization of optoelectronic integration. This work provides essential significance for the fabrication of functional optoelectronic devices.

Electrochemical control of the morphological evolution of PEDOT on a Ni-Co(OH)2/carbon cloth surface to modulate the performance of wearable H2O2 sensors

The slow redox rate of hydrogen peroxide (H2O2) in neutral environments makes the H2O2 sensor inadequate for the detection of low levels of signalling molecules. The aim of this study is to fabricate a flexible sensing electrode by hydrothermally loading micro-nanometer Ni and Co(OH)2 on carbon cloth (CC) and electrochemically depositing poly(3,4-ethylenedioxythiophene) (PEDOT) on the surface of the electrode. The sensor presented high sensitivity (10.43 mA mM-1 cm-2), a wide detection range (0.033-120.848 mM), a low detection limit (0.92 nM), high stability, and excellent anti-interference performance in neutral solutions. Ni-Co(OH)2 provides abundant active sites while CC solves their agglomeration phenomenon and conductivity. The PEDOT film offers heightened conductivity, hydrophilicity, interfacial stability, and an electrochemically active surface area (ECSA). The side area of the chrysanthemum petal like PEDOT is 39 ± 7 times the bottom area, and PEDOT increases the ECSA of the composite to six times that of CC. Electrochemical precise control of PEDOT morphology to improve sensor performance provides a new strategy for the application of PEDOT in sensors.

Fabrication of an inverse opal structure of a hybrid metal-conducting polymer for plasmon-induced hyperthermia applications

This paper describes the effective fabrication of an inverse opal (IO) structure for plasmon-induced hyperthermia applications using silver nanoparticles (AgNPs) doped in a conducting polymer of poly(3,4-ethylene dioxythiophene) (PEDOT). Indium tin oxide (ITO) substrates were firstly modified electrochemically by a layer of the inverse opal structure of PEDOT (IO-PEDOT). These as-prepared electrodes were subsequently used as working electrodes for electrodepositing AgNPs. The presence of plasmonic AgNPs doped inside a polymer network caused the hybrid of IO-PEDOT and AgNPs to generate significantly more heat than thin-film PEDOT, thin-film PEDOT/AgNPs, and IO-PEDOT under 532 nm laser irradiation. This is attributed to the synergistic effect of the large active area inverse opal structure and doped AgNPs, which exhibit more thermal energy and heat faster than the individual component structures. These findings point to a wide range of potential applications for hybrid IO-PEDOT/AgNPs in hyperthermia treatment.

Nanosphere Lithography: A Versatile Approach to Develop Transparent Conductive Films for Optoelectronic Applications

Transparent conductive films (TCFs) are irreplaceable components in most optoelectronic applications such as solar cells, organic light-emitting diodes, sensors, smart windows, and bioelectronics. The shortcomings of existing traditional transparent conductors demand the development of new material systems that are both transparent and electrically conductive, with variable functionality to meet the requirements of new generation optoelectronic devices. In this respect, TCFs with periodic or irregular nanomesh structures have recently emerged as promising candidates, which possess superior mechanical properties in comparison with conventional metal oxide TCFs. Among the methods for nanomesh TCFs fabrication, nanosphere lithography (NSL) has proven to be a versatile platform, with which a wide range of morphologically distinct nanomesh TCFs have been demonstrated. These materials are not only functionally diverse, but also have advantages in terms of device compatibility. This review provides a comprehensive description of the NSL process and its most relevant derivatives to fabricate nanomesh TCFs. The structure-property relationships of these materials are elaborated and an overview of their application in different technologies across disciplines related to optoelectronics is given. It is concluded with a perspective on current shortcomings and future directions to further advance the field.

Rewritable PEDOT Film Based on Water-Writing and Electroerasing

Rewritable paper has greatly promoted the sustainable development of society. However, the hydrophilicity/lipophilicity of the poly(3,4-ethylenedioxythiophene) (PEDOT) film limits its application as the rewritable paper. Herein, we constructed a repeatable writing/erasing pattern on a PEDOT film (rewritable PEDOT paper) by combining wettability control, water-induced dedoping, and an electrochemical redox reaction. The treatment with a medium-polarity/high-volatility solvent (MP/HVS) adjusted the wettability of the PEDOT film (water contact angle increased from 6.5° to 146.2°), contributing to the formation of a hydrophobic writable substrate. The treatment with a high-polarity solvent (HPS) induced the dedoping of anions in the PEDOT chain, resulting in the film's color changed from blue to purple and serving as a writing process. The intrinsic electrochemical redox (elimination of color change by doping/dedoping of lithium ions in the PEDOT chain) of the PEDOT film enabled the erasing process. This writing/erasing process can be repeated at least 10 times. The patterned PEDOT film maintained excellent stability to standing diverse solvents (low-polarity solvent (LPS) and MP/HVS), high temperatures (350 °C), and irradiation of different light wavelengths (wavelengths of 365, 380, 460, 520, and 645 nm). Additionally, the conductivity of the PEDOT film was quantitatively measured (impedance: LPS, increased 8.84%; MP/HVS, decreased 6.67%; and HPS, increased 27.97%) by fabricating a micropatterned PEDOT electrode. This work will provide a method for the fabrication of PEDOT-based optoelectronic functional materials.

Confinement Effect of Plasmon for the Fabrication of Interconnected AuNPs through the Reduction of Diazonium Salts

This paper describes a rapid bottom-up approach to selectively functionalize gold nanoparticles (AuNPs) on an indium tin oxide (ITO) substrate using the plasmon confinement effect. The plasmonic substrates based on a AuNP-free surfactant were fabricated by electrochemical deposition. Using this bottom-up technique, many sub-30 nm spatial gaps between the deposited AuNPs were randomly generated on the ITO substrate, which is difficult to obtain with a top-down approach (i.e., E-beam lithography) due to its fabrication limits. The 4-Aminodiphenyl (ADP) molecules were grafted directly onto the AuNPs through a plasmon-induced reduction of the 4-Aminodiphenyl diazonium salts (ADPD). The ADP organic layer preferentially grew in the narrow gaps between the many adjacent AuNPs to create interconnected AuNPs. This novel strategy opens up an efficient technique for the localized surface modification at the nanoscale over a macroscopic area, which is anticipated to be an advanced nanofabrication technique.

A universal strategy: Rational construction of noble metal nanoparticle-shell/conducting polymer nanofiber-core electrodes with enhanced electrochemical performances

To address a challenge for decoration of noble metal nanoparticles (NMNPs)-shell on conducting polymer nanofiber (CPNF) electrodes (i.e. NMNP-shell/CPNF-core electrodes) for boosting electrochemical performances, a two-step strategy comprising chemical pre-deposition and electrochemical deposition is designed. The strategy shows a high universality in terms of the diversity of NMNP-shell elements (single-element: AgNP-shell, AuNP-shell, PtNP-shell, PdNP-shell; multi-element: Au/Pt/PdNP-shell) and the independence of conductive substrates of electrodes. The shells are composed of high-density NMNPs and have strong adhesion to CPNF-cores. It is demonstrated that in response to a specific applied electrical stimulus, the resulting low doping level of CPNFs facilitates the generation of high-density nucleation sites (small NMNPs) by chemical pre-deposition (as high capability of electron transfer and low resistance to electron transfer from CP chains to NM ions), which is indispensable for the formation of NMNP-shells on CPNF-cores by electrochemical deposition. The decoration of NMNP-shells can significantly enhance the electrochemical performances of CPNF electrodes. Moreover, the great practicality and reliability of NMNP-shell/CPNF-core electrodes in use as an electrocatalytic platform are confirmed. This universal strategy opens up a new avenue to construct high-dimension shell/core-nanostructured electrodes.

Tunable 3D nanofibrous and bio-functionalised PEDOT network explored as a conducting polymer-based biosensor

Conducting polymers that possess good electrochemical properties, nanostructured morphology and functionality for bioconjugation are essential to realise the concept of all-polymer-based biosensors that do not depend on traditional nanocatalysts such as carbon materials, metal, metal oxides or dyes. In this research, we demonstrated a facile approach for the simultaneous preparation of a bi-functional PEDOT interface with a tunable 3D nanofibrous network and carboxylic acid groups (i.e. Nano-PEDOT-COOH) via controlled co-polymerisation of EDOT and EDOT-COOH monomers, using tetrabutylammonium perchlorate as a soft-template. By tuning the ratio between EDOT and EDOT-COOH monomer, the nanofibrous structure and carboxylic acid functionalisation of Nano-PEDOT-COOH were varied over a fibre diameter range of 15.6 ± 3.7 to 70.0 ± 9.5 nm and a carboxylic acid group density from 0.03 to 0.18 μmol cm^-2. The nanofibres assembled into a three-dimensional network with a high specific surface area, which contributed to low charge transfer resistance and high transduction activity towards the co-enzyme NADH, delivering a wide linear range of 20-960 μM and a high sensitivity of 0.224 μA μM^-1 cm^-2 at the Nano-PEDOT-COOH50% interface. Furthermore, the carboxylic acid groups provide an anchoring site for the stable immobilisation of an NADH-dependent dehydrogenase (i.e. lactate dehydrogenase), via EDC/S-NHS chemistry, for the fabrication of a Bio-Nano-PEDOT-based biosensor for lactate detection which had a response time of less than 10 s over the range of 0.05-1.8 mM. Our developed bio-Nano-PEDOT interface shows future potential for coupling with multi-biorecognition molecules via carboxylic acid groups for the development of a range of advanced all-polymer biosensors.

Nanostructured Mixed Layers of Organic Materials Obtained by Nanosphere Lithography and Electrochemical Reduction of Aryldiazonium Salts

In this work, we have combined nanosphere lithography with electrochemical reduction of aryldiazonium salts to elaborate nanostructured mixed layers of organic materials. The strategy consists first in the deposition of a close-packed hexagonal monolayer of microbeads used as a mask for the electroreduction of a first aryldiazonium salt. After removing the beads, an ultrathin organic layer with holes remains. Then, a second aryldiazonium salt is electrochemically reduced selectively inside the holes. The relative thickness of the two deposited materials can be changed, leading to mixed layers of different topographies. Moreover, using diazoniums with complementary redox properties, a modified bifunctional electrode acting as a filter for electron transfer with a low potential gap has been obtained. Such layers are similar to low-band-gap organic semiconductors that can be easily n or p doped. Despite this analogy, the oxidation and reduction of redox probes in solution on such nanostructured surfaces occur on completely separated areas of the mixed layer.

Fluidic Patterning of Transparent Polymer Heaters

Semi-conducting polymers are promising materials for current and next generations of electronic devices, sensors and actuators, especially regarding their ability to conform to flexibles architectures. In particular, aqueous-based dispersions of semi-conducting complexes such as PEDOT:PSS can be printed using a variety of coating techniques and the conductivity of the final deposit may reach high values upon a proper treatment. The micro-structuration of these polymeric deposits remains challenging and of prime importance for further integration. We show here that a microfluidic post-treatment of PEDOT:PSS films of permits us to boost locally only their conductivity by several orders of magnitude, with a micron scale resolution. This is a fast process (~second), straightforward to upscale, that yields conductive patterns within the pristine film. Taking advantage of the localized Joule's effect, we evidence using quantitative thermography a very efficient heating behaviour of the conductive tracks, which makes these polymeric structures promising candidates for low cost, clean-room free electrodes for lab-on-chip applications.

Cross Stacking of Nanopatterned PEDOT Films for Use as Soft Electrodes

Cross stacking of nanopatterned conductive polymer film was explored using a sacrificial soft template made of nanopatterned polystyrene (PS) film as a guide for nanopatterned conductive polymer film. For use as a conductive film, the PS pattern was filled with poly(3,4-ethylenedioxythiophene) (PEDOT), and then completely removed, to generate single-patterned PEDOT (SPDOT) film having a conductivity of 1079 S/cm, which was comparable to the pristine unpatterned PEDOT (UPDOT) film on a glass slide. SPDOT layers were stacked across each other to form double-layered (DPDOT) and multiple-layered patterned PEDOT film on a glass slide or polymeric substrate. The patterned PEDOT film showed enhanced optical and electrochemical activity; specifically as compared to the UPDOT film on a glass slide, the DPDOT film showed an increase in reflectance and an enhanced electrochemically active surface by 23.4% and 32.8%, respectively. The patterned PEDOT film on a polymer substrate showed high bendability up to being completely folded and maintained its conductivity for over 10 000 cycles of bending. The patterned PEDOT layers were applied to dye-sensitized solar cells (DSSCs) as a transparent conductive oxide (TCO)-free counter electrode. An N719-based DSSC with a DPDOT film recorded a photoconversion efficiency of 7.54%, which is one of the highest values among the TCO-free DSSCs based on a PEDOT counter electrode.

Tailored Surfaces/Assemblies for Molecular Plasmonics and Plasmonic Molecular Electronics

Molecular plasmonics uses and explores molecule-plasmon interactions on metal nanostructures for spectroscopic, nanophotonic, and nanoelectronic devices. This review focuses on tailored surfaces/assemblies for molecular plasmonics and describes active molecular plasmonic devices in which functional molecules and polymers change their structural, electrical, and/or optical properties in response to external stimuli and that can dynamically tune the plasmonic properties. We also explore an emerging research field combining molecular plasmonics and molecular electronics.

Fabrication of PEDOT Nanocone Arrays with Electrochemically Modulated Broadband Antireflective Properties

Ordered nanocone arrays of the electroactive polymer poly(3,4-ethylenedioxythiophene) (PEDOT) were fabricated by the simultaneous oxygen plasma etching of an electrodeposited PEDOT thin film coated with a hexagonally closed packed polystyrene bead monolayer. PEDOT nanocone arrays with an intercone spacing of 200 nm and an average nanocone height of 350 nm exhibited a low broadband reflectivity of <1.5% from 550 to 800 nm. Electrochemical modulation of the oxidation state of the PEDOT nanocone array film was used to change both its ex situ absorption spectrum (electrochromism) and reflection spectrum (electroreflectivity). The sign of the PEDOT nanocone array electroreflectivity was opposite to that observed from unmodified PEDOT thin films; this significant difference is attributed to the unique optical behavior of nanostructured surfaces with an interfacial layer that contains a graded mix of air and highly absorptive nanocones. The combined electrochromic and electroreflective behavior of the antireflective PEDOT nanocone array films should find promising applications in solar energy cells, sensors and other optical devices.

Bottom-Up Electrochemical Fabrication of Conjugated Ultrathin Layers with Tailored Switchable Properties

A bottom-up electrochemical process for fabricating conjugated ultrathin layers with tailored switchable properties is developed. Ultrathin layers of covalently grafted oligo(bisthienylbenzene) (oligo(BTB)) are used as switchable organic electrodes, and 3,4-ethylenedioxythiophene (EDOT) is oxidized on this layer. Adding only a few (less than 3) nanometers of EDOT moieties (5 to 6 units ) completely changes the switching properties of the layer without changing the surface concentration of the electroactive species. A range of new materials with tunable interfacial properties is created. They consist of oligo(BTB)-oligo(EDOT) diblock oligomers of various relative lengths covalently grafted onto the underlying electrode. These films retain reversible redox on/off switching and their switching potential can be finely tuned between +0.6 and -0.3 V/SCE while the overall thickness remains below 11 nm.

Recent Advances in Nanostructured Conducting Polymers: from Synthesis to Practical Applications

Conducting polymers (CPs) have been widely studied to realize advanced technologies in various areas such as chemical and biosensors, catalysts, photovoltaic cells, batteries, supercapacitors, and others. In particular, hybridization of CPs with inorganic species has allowed the production of promising functional materials with improved performance in various applications. Consequently, many important studies on CPs have been carried out over the last decade, and numerous researchers remain attracted to CPs from a technological perspective. In this review, we provide a theoretical classification of fabrication techniques and a brief summary of the most recent developments in synthesis methods. We evaluate the efficacy and benefits of these methods for the preparation of pure CP nanomaterials and nanohybrids, presenting the newest trends from around the world with 205 references, most of which are from the last three years. Furthermore, we also evaluate the effects of various factors on the structures and properties of CP nanomaterials, citing a large variety of publications.