Dynamic Characteristics of Aggregation Effects of Organic Dyes in Dye-Sensitized Solar Cells

Insulated π-Conjugated Azido Scaffolds for Stepwise Functionalization via Huisgen Cycloaddition on Metal Oxide Surfaces

In organic-inorganic hybrid devices, fine interfacial controls by organic components directly affect the device performance. However, fabrication of uniformed interfaces using π-conjugated molecules remains challenging due to facile aggregation by their strong π-π interaction. In this report, a π-conjugated scaffold insulated by covalently linked permethylated α-cyclodextrin moiety with an azido group is synthesized for surface Huisgen cycloaddition on metal oxides. Fourier-transformed infrared (FT-IR) spectroscopy and X-ray photoelectron spectroscopy confirm the successful immobilization of the insulated azido scaffold on ZnO nanowire array surfaces. Owing to the highly independent immobilization, the scaffold allows rapid and complete conversion of the surface azido group in Huisgen cycloaddition reactions with ethynyl-terminated molecules, as confirmed by FT-IR spectroscopy monitoring. Cyclic voltammetry analysis of modified indium tin oxide substrates shows the positive effects of cyclic insulation toward suppression of intermolecular interaction between molecules introduced by the surface Huisgen cycloaddition reactions. The utility of the scaffold for heterogeneous catalysis is demonstrated in electrocatalytic selective O2 reduction to H2O2 with cobalt(II) chlorin modified fluorine doped tin oxide electrode and photocatalytic H2 generation with iridium(III) dye-sensitized Pt-loaded TiO2 nanoparticle. These results highlight the potential of the insulated azido scaffold for a stepwise functionalization process, enabling precise and well-defined hybrid interfaces.

Charge Transfer Process of a Solvated Hydrogen-Bonded Organic Network

We show the first example of an organic linker (OL) terminated by carboxylic groups that can form a hydrogen-bonded network/polymer (HBN) in solution under controlled conditions in which the photogenerated charges can hop from a monomer OL to the hydrogen-bonded backbone of OLs, as probed by transient absorption (fs-TA). While fs-TA reveals a slow twisting process in the monomer form of the OL, the formation of a hydrogen-bonded network in solution suppresses such process and favors instead a charge transfer (CT) state along the low-lying hydrogen-bonded backbone. Theoretical calculations show that such solvated HBN in a specific polar solvent is stabilized due to the huge change of the dipole moment from monomer compared to the network, leading to a charge delocalization character due to the symmetry breaking. Our findings will open new avenues for implementing solvated hydrogen-bonded molecules in applications such as sensing and photocatalysis.

Nanotube Template-Directed Formation of Strongly Coupled Dye Aggregates with Tunable Exciton Fluorescence Controlled by Switching between J- and H-Type Electronic Coupling

Strongly coupled dye aggregates with tailored exciton properties may find their use in developing artificial light-harvesting and optoelectronic devices. Here, we report the control of tubular pseudoisocyanine (PIC) dye J- and H-aggregate formation with tunable exciton fluorescence using lithocholic acid (LCA) as a template. The LCA-templated PIC J-aggregate nanotubes formed at a higher LCA/PIC molar ratio (≥5:1) exhibit a sharp, red-shifted absorption band (at 555 nm), intense fluorescence (at 565 nm), and shorter lifetime (200 ps), all indicating their strong superradiance properties. In contrast, the H-aggregate nanotubes formed at a lower LCA/PIC molar ratio (2:1) exhibit a significantly blue-shifted absorption band (at 420 nm) and highly red-shifted fluorescence emission (at 600 nm) with enhanced lifetime (4.40 ns). The controlled switching of the optical properties of the PIC dye aggregates achieved by controlling the LCA/PIC molar ratio could serve as an important guideline for the design of organic photo-functional materials.

Cause, Regulation and Utilization of Dye Aggregation in Dye-Sensitized Solar Cells

As an important member of third generation solar cell, dye-sensitized solar cells (DSSCs) have the advantages of being low cost, having an easy fabrication process, utilizing rich raw materials and a high-power conversion efficiency (PCE), prompting nearly three decades as a research hotspot. Recently, increasing the photoelectric conversion efficiency of DSSCs has proven troublesome. Sensitizers, as the most important part, are no longer limited to molecular engineering, and the regulation of dye aggregation has become a widely held concern, especially in liquid DSSCs. This review first presents the operational mechanism of liquid and solid-state dye-sensitized solar cells, including the influencing factors of various parameters on device efficiency. Secondly, the mechanism of dye aggregation was explained by molecular exciton theory, and the influence of various factors on dye aggregation was summarized. We focused on a review of several methods for regulating dye aggregation in liquid and solid-state dye-sensitized solar cells, and the advantages and disadvantages of these methods were analyzed. In addition, the important application of quantum computational chemistry in the study of dye aggregation was introduced. Finally, an outlook was proposed that utilizing the advantages of dye aggregation by combining molecular engineering with dye aggregation regulation is a research direction to improve the performance of liquid DSSCs in the future. For solid-state dye-sensitized solar cells (ssDSSCs), the effects of solid electrolytes also need to be taken into account.

Understanding the effects of the co-sensitizing ratio on the surface potential, electron injection efficiency, and Förster resonance energy transfer

Multiple absorbers that function in different absorption regions (near infra-red (NIR) and UV-Visible (UV-Vis)) have been widely used in solar cell applications to enhance the light-harvesting.

Dynamics of singlet fission and electron injection in self-assembled acene monolayers on titanium dioxide

We employ a combination of linear spectroscopy, electrochemistry, and transient absorption spectroscopy to characterize the interplay between electron transfer and singlet fission dynamics in polyacene-based dyes attached to nanostructured TiO2. For triisopropyl silylethynyl (TIPS)-pentacene, we find that the singlet fission time constant increases to 6.5 ps on a nanostructured TiO2 surface relative to a thin film time constant of 150 fs, and that triplets do not dissociate after they are formed. In contrast, TIPS-tetracene singlets quickly dissociate in 2 ps at the molecule/TiO2 interface, and this dissociation outcompetes the relatively slow singlet fission process. The addition of an alumina layer slows down electron injection, allowing the formation of triplets from singlet fission in 40 ps. However, the triplets do not inject electrons, which is likely due to a lack of sufficient driving force for triplet dissociation. These results point to the critical balance required between efficient singlet fission and appropriate energetics for interfacial charge transfer.

Multimolecular assemblies on high surface area metal oxides and their role in interfacial energy and electron transfer

High surface area metal oxides offer a unique substrate for the assembly of multiple molecular components at an interface.

Molecular design towards suppressing electron recombination and enhancing the light-absorbing ability of dyes for use in sensitized solar cells: a theoretical investigation

We report a molecular design strategy with a comprehensive consideration of both inhibiting electron recombination and enhancing the light-harvesting ability.

Highly Twisted Dianchoring D-π-A Sensitizers for Efficient Dye-Sensitized Solar Cells

Two new organic dyes-BPDTA and BTTA-possessing dual D-π-A units have been synthesized, characterized, and employed as efficient sensitizers for dye-sensitized solar cells. The two individual D-π-A, which are based on (E)-3-(5'-(4-(bis(4-(hexyloxy)phenyl)amino)phenyl)-[2,2'-bithiophen]-5-yl)-2-cyanoacrylic acid unit (D21L6), are connected directly between phenylene or thiophene within linear π-conjugated backbone to constitute a highly twisted architecture for suppressing the dye aggregation. The new dianchoring dyes exhibited pronounced absorption profile with higher molar extinction coefficient, which is consistent with the results obtained from density functional theory (DFT) calculations. The theoretical analysis also indicated that the charge transfer transition is mainly constituted of HOMO/HOMO-1 to LUMO/LUMO+1 that were found to be located on donor and acceptor segments, respectively. Theoretical calculations give the distance between two binding sites of 19.50 Å for BPDTA and 12.04 Å for BTTA. The proximity between two anchoring units of BTTA results in superior dye loading and, hence, higher cell efficiency. The BTTA-based device yielded an optimized efficiency of 6.86%, compared to 6.61% for the BPDTA-based device, whereas the model sensitizer D21L6 only delivered an inferior performance of 5.33% under similar conditions. Our molecular design strategy thus opens up a new horizon to establish efficient dianchoring dyes.

Exploring the electrochemical properties of hole transport materials with spiro-cores for efficient perovskite solar cells from first-principles

Perovskite solar cells (PSCs) with organic small molecules as hole transport materials (HTMs) have attracted considerable attention due to their power conversion efficiencies as high as 20%. In the present work, three new spiro-type hole transport materials with spiro-cores, i.e. Spiro-F1, Spiro-F2 and Spiro-F3, are investigated by using density functional theory combined with the Marcus theory and Einstein relation. Based on the calculated and experimental highest occupied molecular orbital (HOMO) levels of 30 reference molecules, an empirical equation, which can predict the HOMO levels of hole transport materials accurately, is proposed. Moreover, a simplified method, in which the hole transport pathways are simplified to be one-dimensional, is presented and adopted to qualitatively compare the molecular hole mobilities. The calculated results show that the perovskite solar cells with the new hole transport materials can have higher open-circuit voltages due to the lower HOMO levels of Spiro-F1 (-5.31 eV), Spiro-F2 (-5.42 eV) and Spiro-F3 (-5.10 eV) compared with that of Spiro-OMeTAD (-5.09 eV). Furthermore, the hole mobilities of Spiro-F1 (1.75 × 10(-2) cm(2) V(-1) s(-1)) and Spiro-F3 (7.59 × 10(-3) cm(2) V(-1) s(-1)) are 3.1 and 1.4 times that of Spiro-OMeTAD (5.65 × 10(-3) cm(2) V(-1) s(-1)) respectively, due to small reorganization energies and large transfer integrals. Interestingly, the stability properties of Spiro-F1 and Spiro-F2 are shown to be comparable to that of Spiro-OMeTAD, and the dimers of Spiro-F2 and Spiro-F3 possess better stability than that of Spiro-OMeTAD. Taking into consideration the appropriate HOMO level, improved hole mobility and enhanced stability, Spiro-F1 and Spiro-F3 may become the most promising alternatives to Spiro-OMeTAD. The present work offers a new design strategy and reliable calculation methods towards the development of excellent organic small molecules as HTMs for highly efficient and stable PSCs.

First principles study of organic sensitizers for dye sensitized solar cells: effects of anchoring groups on optoelectronic properties and dye aggregation

Efficient organic sensitizers with improved spectral properties and less aggregation have been proposed for practical DSSCs based on theoretical calculations.