Core-Shell Ferromagnetic Nanorod Based on Amine Polymer Composite (Fe3O4@DAPF) for Fast Removal of Pb(II) from Aqueous Solutions

Mesoporous Magnetic/Polymer Hybrid Nanoabsorbent for Rapid and Efficient Removal of Heavy Metal Ions from Wastewater

As an advanced water purification technology, magnetic nanoabsorbents are highly attractive for their sustainability, robustness, and energy efficiency. However, magnetic responsiveness and high adsorptive capacity are irreconcilable during the design and synthesis of a high-performance magnetic nanoabsorbent. Here, we address this issue by designing a kind of mesoporous magnetic polymer hybrid microspheres, where functional polymers such as polyrhodanine and polypyrrole were attached to the pore walls in the interior of mesoporous Fe3O4 microspheres through in situ polymerization. Due to the integrated large saturation magnetic moment, porous structure, and dense polymer layer, the mesoporous magnetic polymer hybrid microspheres demonstrated fast magnetic responsiveness, excellent recycling performance, and high adsorption capacities toward Pb(II) ions (189 mg g-1) for polyrhodanine and Cr(VI) ions (199 mg g-1) for polypyrrole. Furthermore, their potential application in wastewater treatment was verified by a self-made magnetic separation column, where the designed magnetic nanoabsorbent exhibits significant advantages including rapid separation of heavy metal ions and high outflow. This study provided a promising magnetic polymer hybrid nanoabsorbent for realizing efficient removal of heavy metal ions from wastewater.

Magnetic Biochar Derived from Fenton Sludge/CMC for High-Efficiency Removal of Pb(II): Synthesis, Application, and Mechanism

Magnetic biochar composites (MBC) were developed by a simple one-step pyrolysis method using Fenton sludge waste solid and carboxymethyl cellulose sodium. Detailed morphological, chemical, and magnetic characterizations corroborate the successful fabrication of MBC. Batch adsorption experiments show that the synthesized MBC owns high-efficiency removal of Pb(II), accompanied by ease-of-separation from aqueous solution using magnetic field. The experiment shows that the equilibrium adsorption capacity of MBC for Pb(II) can reach 199.9 mg g^-1, corresponding to a removal rate of 99.9%, and the maximum adsorption capacity (q_m) reaches 570.7 mg g^-1, which is significantly better than that of the recently reported magnetic similar materials. The adsorption of Pb(II) by MBC complies with the pseudo second-order equation and Langmuir isotherm model, and the adsorption is a spontaneous, endothermic chemical process. Investigations on the adsorption mechanism show that the combination of Pb(II) with the oxygen-containing functional groups (carboxyl, hydroxyl, etc.) on biochar with a higher specific surface area are the decisive factors. The merits of reusing solid waste resource, namely excellent selectivity, easy separation, and simple preparation make the MBC a promising candidate of Pb(II) purifier.

A CMC-g-poly(AA-co-AMPS)/Fe3O4 hydrogel nanocomposite as a novel biopolymer-based catalyst in the synthesis of 1,4-dihydropyridines

A CMC-g-poly(AA-co-AMPS)/Fe₃O₄ hydrogel nanocomposite was successfully designed and prepared via graft copolymerization of AA and AMPS on CMC followed by the cross-linking addition of FeCl₃/FeCl₂. The synthesized hydrogel nanocomposite was characterized by Fourier-transform infrared (FT-IR) spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy-dispersive X-ray (EDX) spectroscopy, elemental mapping, thermogravimetric analysis/differential thermal analysis (TGA/DTA), and vibrating sample magnetometry (VSM). The CMC-g-poly(AA-co-AMPS)/Fe₃O₄ hydrogel nanocomposite was employed as a biocompatible catalyst for the green synthesis of 1,4-dihydropyridine (1,4-DHP) derivatives under thermal and ultrasound-assisted reaction conditions. High efficiency, low catalyst loadings, short reaction time, frequent catalyst recovery, environmental compatibility and mild conditions were found in both methods.

Designed formation of C/Fe3O4@Ni(OH)2 cathode with enhanced pseudocapacitance for asymmetric supercapacitors

The rational design and synthesis of advanced electrode materials are significant for the applications of supercapacitors. Ferroferric oxide (Fe₃O₄), with its high theoretical capacitance is a renowned cathode material. Nevertheless, its low electronic conductivity and poor cycling stability during a long-term charge/discharge process limit its large-scale applications. In this work, the precise modulation of multiple components was reported to enhance electrochemical performance. The ternary heterostructures were fabricated by wrapping ultrathin nickel hydroxide (Ni(OH)₂) nanosheets on the surfaces of Fe₃O₄ nanoparticles-loaded on sodium carboxymethyl cellulose (CMC)-derived porous carbon, named as C/Fe₃O₄@Ni(OH)₂. Due to the large specific surface area and excellent conductivity of CMC-derived porous carbon and the abundant reaction sites of Ni(OH)₂ nanosheets, the optimized C/Fe₃O₄@Ni(OH)₂-1.0 sample exhibited the highest specific capacitance of 3072F g^-1 at a current density of 0.5 A g^-1. Furthermore, the assembled asymmetric supercapacitor (ASC) with activated carbon and C/Fe₃O₄@Ni(OH)₂-1.0 as the negative and positive electrodes, respectively, showed an energy density of 123 W h kg^-1 at 381 W kg^-1, and a long-life stability with an excellent capacitance retention of 90.04 % after 10,000 cycles. The route for preparing composite electrode materials proposed in this work provides a reference for realizing high-performance energy storage devices.

Au/Fe3O4-based nanozymes with peroxidase-like activity integrated in immunochromatographic strips for highly-sensitive biomarker detection

Because of their simplicity, rapidity, and cost-effectiveness, immunochromatographic strips (ICTs) have been widely used as an effective tool in various fields. However, typical strips for the preliminary screening suffer from limited detection sensitivity, particularly in biomarker detection with trace concentration. Herein, to tackle this challenge, we integrated homemade gold-decorated Fe₃O₄ nanoparticles (Au/Fe₃O₄ NPs) with flexible strips, exploring the excellent peroxidase-like activity of this labeled material, and then enhancing the detection sensitivity via signal amplification. The limit of detection (LOD) of the strips is as low as 0.05 mIU mL^-1 when human chorionic gonadotropin (hCG) is as a biomarker model, which is 500 times lower than that of the traditional color-based strip. Overall, our results demonstrated the potential for Au/Fe₃O₄ NP based-ICTs for the rapid detection of the biomarker in an instrument-free and point-of-care testing format.

Design of Zr-MOFs by Introducing Multiple Ligands for Efficient and Selective Capturing of Pb(II) from Aqueous Solutions

The existence of lead ions seriously affects the quality of many metal products in metallurgical enterprises. Currently, the various methods of lead-ion removal tried by researchers will affect valuable metals in the removal process, thus resulting in low economic efficiency. In this study, a novel metal-organic framework adsorbent (UiO-FHD) which efficiently and selectively captures lead ions is developed by introducing multiple ligands. The maximum adsorption capacity of lead ions is 433.15 mg/g at pH 5. The adsorption process accords with the pseudo-second-order kinetic and the Langmuir isotherm models at room temperature. Thermodynamic experiments indicate that the removal of Pb(II) is facilitated by appropriate temperature reduction. The performance tests indicate that UiO-FHD maintains a high removal rate of 90.35% for Pb(II) after four consecutive adsorption-desorption cycles. The distribution coefficient of lead ions (26.7 L/g) shows that UiO-FHD has excellent selective adsorption for lead ions. It is revealed that the chelation of the sulfhydryl groups and the electrostatic interaction of the hydroxyl groups are the dominant factors to improve the removal rate of Pb(II) by density functional theory calculations. This study clarifies the value of self-designed novel organic ligands in metal-organic framework materials that selectively capture heavy-metal ions.

Salim R, Razali A. Reduced Graphene Oxide Functionalized Magnetic Nanocomposites for Environmental Pollutant Removal

Nowadays, the excessive and uncontrolled discharge of chemicals are imposing major health threats. The demands for clean and safe water amplifies the need to develop improved technologies for environmental contaminant removal. Considering the limitations of conventional methods for contaminants removal, we have prepared magnetic iron oxide nanoparticles functionalised with reduced graphene oxide as a potential material for environmental pollutants removal. The magnetic properties in potential adsorbent materials are highly desirable due to several advantages. Among which are their large adsorptive surface area, low diffusion resistance, high adsorption capacity and fast separation in large volumes of solution. The surface functionalised magnetic iron oxide nanoparticles (MNP) were fabricated using a one-pot hydrothermal method by adding reduced graphene oxide (rGO) into the reaction system. The graphene oxide were reduced prior to the addition in the hydrothemal decomposition step. The resultant rGO-MNP nanocomposites were characterised using FT-IR, SEM and VSM to investigate the functional groups, morphology and magnetic properties, resepectively. We also demonstrated the potential of the hybridised magnetic material with hydrophobic reduced graphene oxide for environmental pollutant removal.

Fabrication of 2D nanosheet sorbents through metastable emulsion droplets and subsequent two-step grafting polymerization for efficient blood lead removal in vitro

Hemoperfusion is a powerful and yet simple method for lead poisoning treatment, but creation of safe and effective sorbents with excellent selectivity remains a real challenge. To address this, we here construct 2D nanosheet sorbents (BM-SH) through metastable emulsion droplets and subsequent two-step grafting polymerization for efficient blood lead removal in vitro. Metastable emulsion droplets endow typical nanosized sheet-like structure (thickness of 30 nm) and relatively round shape. The consecutive two grafting processes using hydroxyethyl methacrylate (HEMA) and L-cysteine monomer (D-SH) provide BM-SH with a high density of accessible binding sites towards lead ions (Pb²⁺). A high adsorption capacity of 390.5 mg g^-1 and quick capture 97.35 % of Pb²⁺ within initial 10 min are obtained, surpassing most of the reported sorbents for lead removal. Besides, adsorption distribution coefficient (K_d) of BM-SH among four coexisting metal ions achieved 7792 mL g^-1, showing outstanding selectivity toward Pb²⁺. Importantly, a possible adsorption mechanism is recognized as coordination with carboxyl, sulfydryl and imino groups from L-cysteine, and mercapto ligand as the key chelating agent may be the reason for high Pb²⁺ affinity. And what's more, BM-SH displays good hemocompatibility and high efficiency of blood lead removal rate (above 86 % in vitro).

Adsorption Characteristics and Mechanisms of Fe-Mn Oxide Modified Biochar for Pb(II) in Wastewater

This study prepared iron-manganese oxide-modified biochar (FM-BC) by impregnating rice straw biochar (BC) with a mixed solution of ferric nitrate and potassium permanganate. The effects of pH, FM-BC dosage, interference of coexisting ions, adsorption time, incipient Pb(II) concentration, and temperature on the adsorption of Pb(II) by FM-BC were investigated. Moreover, the Pb(II) adsorption mechanism of FM-BC was analyzed using a series of characterization techniques. The results showed that the Fe-Mn oxide composite modification significantly promoted the physical and chemical functions of the biochar surface and the adsorption capacity of Pb(II). The specific surface area of FM-BC was 18.20 times larger than that of BC, and the maximum Pb(II) adsorption capacity reached 165.88 mg/g. Adsorption kinetic tests showed that the adsorption of Pb(II) by FM-BC was based on the pseudo-second-order kinetic model, which indicated that the adsorption process was mainly governed by chemical adsorption. The isothermal adsorption of Pb(II) by FM-BC conformed to the Langmuir model, indicating that the adsorption process was spontaneous and endothermic. Characterization analyses (Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy) showed that the adsorption mechanism of Pb(II) by FM-BC was mainly via electrostatic adsorption, chemical precipitation, complexation, ion exchange, and the transformation of Mn₂O₃ into MnO₂. Therefore, FM-BC is a promising adsorbent for Pb(II) removal from wastewater.

The Study of Amidoxime-Functionalized Cellulose Separate Th(IV) from Aqueous Solution

Selective extraction of low-concentration thorium (Th(IV)) from wastewater is a very important research topic. In this paper, amidoxime cellulose was synthesized, and its composition and structure were characterized by FT-IR, SEM, XPS, and elemental analysis. The adsorption experiment results showed that the adsorption reaction was a spontaneous exothermic process. When the solid–liquid ratio was 0.12 g/L and the pH value was 3.5, the adsorption percentage of the Th(IV) in water onto amidoxime-functionalized cellulose (AO-CELL) could reach over 80%. The maximum adsorption capacity can reach to 450 mg/g. At the same time, the adsorption selectivity, desorption process and reusability of the material were also studied. The results showed that the AO-CELL had a good selectivity for Th(IV) in the system with Sr²⁺, Cu²⁺, Mg²⁺, Zn²⁺, Pb²⁺, Ni²⁺, and Co²⁺ as co-ions. In the nitric acid concentration of 0.06 mol/L system, the AO-CELL desorption rate of Th(IV) can reach 95%, and the adsorption rate of Th(IV) in aqueous solution of AO-CELL is still above 60% when the AO-CELL is reused four times. The above results show that the amidoxime cellulose adsorption material synthesized by our research group has good selective adsorption performance for Th(IV) of a low concentration in an aqueous solution and has a good practical application value.

Kinetics and Adsorption Isotherms of Amine-Functionalized Magnesium Ferrite Produced Using Sol-Gel Method for Treatment of Heavy Metals in Wastewater

This study is focused on the kinetics and adsorption isotherms of amine-functionalized magnesium ferrite (MgFe₂O₄) for treating the heavy metals in wastewater. A sol-gel route was adopted to produce MgFe₂O₄ nanoparticles. The surfaces of the MgFe₂O₄ nanoparticles were functionalized using primary amine (ethanolamine). The surface morphology, phase formation, and functionality of the MgFe₂O₄ nano-adsorbents were studied using the SEM, UV-visible, FTIR, and TGA techniques. The characterized nanoparticles were tested on their ability to adsorb the Pb²⁺, Cu²⁺, and Zn²⁺ ions from the wastewater. The kinetic parameters and adsorption isotherms for the adsorption of the metal ions by the amine-functionalized MgFe₂O₄ were obtained using the pseudo-first-order, pseudo-second-order, Langmuir, and Freundlich models. The pseudo-second order and Langmuir models best described the adsorption kinetics and isotherms, implying strong chemisorption via the formation of coordinative bonds between the amine groups and metal ions. The Langmuir equation revealed the highest adsorption capacity of 0.7 mmol/g for the amine-functionalized MgFe₂O₄ nano-adsorbents. The adsorption capacity of the nanoadsorbent also changed with the calcination temperature. The MgFe₂O₄ sample, calcined at 500 °C, removed the most of the Pb²⁺ (73%), Cu²⁺ (59%), and Zn²⁺ (62%) ions from the water.

Magnetic responsive mesoporous alginate/β-cyclodextrin polymer beads enhance selectivity and adsorption of heavy metal ions

Mesoporous (~7-8 nm) biopolymer hydrogel beads (HNTs-FeNPs@Alg/β-CD) were synthesised via ionic polymerisation route to separate heavy metal ions. The adsorption capacity of HNTs-FeNPs@Alg/β-CD was higher than that of raw halloysite nano tubes (HNTs), iron nanoparticles (FeNPs), and bare alginate beads. FeNPs induce the magnetic properties of adsorbent and metal-based functional groups in and around the hydrogel beads. The mesoporous surface of the adsorbent permits access of heavy metal ions onto the polymer beads to interact with internal active sites and the mesoporous polymer network. Maximum adsorption capacities of lead (Pb), copper (Cu), cadmium (Cd), and nickel (Ni) were 21.09 mg/g, 15.54 mg/g, 2.47 mg/g, and 2.68 mg/g, respectively. HNTs-FeNPs@Alg/β-CD was able to adsorb heavy metals efficiently (75-99%) under environment-relevant concentrations (200 μg/L) from mixed metal contaminants. The adsorption and selectivity trends of heavy metals were Pb > Cu > Cd > Ni, despite electrostatic binding strength of Cd > Cu > Pb > Ni and covalent binding strength of Pb > Ni > Cu > Cd. It demonstrated that not only chemosorption but also physisorption acts as the sorption mechanism. The reduction in surface area, porosity, and pore volume of the expended adsorbent, along with sorption study results, confirmed that pore filling and intra-particle diffusion played a considerable role in removing heavy metals.

An environmentally benign synthesis of Fe3O4 nanoparticles to Fe3O4 nanoclusters: Rapid separation and removal of Hg(II) from an aqueous medium

In the field of nanotechnology, nanoadsorbents have emerged as a powerful tool for the purification of contaminated aqueous environments. Among the variety of nanoadsorbents developed so far, magnetite (Fe₃O₄) nanoparticles have drawn particular interest because of their quick separation, low cost, flexibility, reproducibility, and environmentally benign nature. Herein, we describe a new strategy for the synthesis of Fe₃O₄ nanoclusters, which is based on the use of naturally available edible mushrooms (Pleurotus eryngii) and environmentally benign propylene glycol as a solvent medium. By tuning the temperature, we successfully convert Fe₃O₄ nanoparticles into Fe₃O₄ nanoclusters via hydrothermal treatment, as evidenced by transmission electron microscopy. The Fe₃O₄ nanoclusters are functionalized with an organic molecule linker (dihydrolipoic acid, DHLA) to remove hazardous Hg(II) ions selectively. Batch adsorption experiments demonstrate that Hg(II) ions are strongly adsorbed on the material surface, and X-ray photoelectron and Fourier transform infrared spectroscopy techniques reveal the Hg(II) removal mechanism. The DHLA@Fe₃O₄ nanoclusters show a high removal efficiency of 99.2 % with a maximum Hg(II) removal capacity of 140.84 mg g^-1. A kinetic study shows that the adsorption equilibrium is rapidly reached within 60 min and follows a pseudo second-order kinetic model. The adsorption and separation system can be readily recycled using an external magnet when the separation occurs within 10 s. We have studied the effect of various factors on the adsorption process, including pH, concentration, dosage, and temperature. The newly synthesized superparamagnetic DHLA@Fe₃O₄ nanoclusters open a new path for further development of the medical, catalysis, and environmental fields.

New insight into the bioinspired sub-10 nm Sn(HPO4)2 confinement for efficient heavy metal remediation in wastewater

Heavy metal pollution poses a severe threat to the water environment. Engineering sub-10 nm active functional materials is an important approach to address the problems, and nanocomposites, developed in recent years by pore confinement always present weaken diffusion and low utilization of nanoparticles. In this study, we successfully prepared the polydopamine confined high-density sub-10 nm Sn(HPO₄)₂ coating for toxic lead(II) removal and its unique external coating structure and superior active sub-10 nm size achieved remarkable performances for heavy metal remediation. The hybrid sub-10 nm coating exhibits an extended acidic environment application (pH = 2.0-7.0) as well as significant selectivity with a superior K_d values (9.4 × 10⁴ mL/g, which is 450 times greater than that of commercial sulfonated polystyrene. Ultrafast filtrations by vacuum further validate its superior sequestration (near to 100%) to Pb and Cd ions at different concentrations (10-100 mg/L) for 2 mins. The real column application further demonstrates the remarkable capacity of 11800 kg/kg sorbents, the trace effluents with three orders (∼10³) reduction to below 1 ppb (> 99.9% Pb removal) and efficient stability for several cycles. The effective performances are mainly driven by the PDA motivated external nanoparticles arrangement and strong inner-sphere complexation by small size of Sn(HPO₄)₂. These results set a new benchmark for removing toxic metals and the proposed approach (engineering sub-10 nm coating design) is unique for heavy metal removal.

A Review on Metal- and Metal Oxide-Based Nanozymes: Properties, Mechanisms, and Applications

Since the ferromagnetic (Fe3O4) nanoparticles were firstly reported to exert enzyme-like activity in 2007, extensive research progress in nanozymes has been made with deep investigation of diverse nanozymes and rapid development of related nanotechnologies. As promising alternatives for natural enzymes, nanozymes have broadened the way toward clinical medicine, food safety, environmental monitoring, and chemical production. The past decade has witnessed the rapid development of metal- and metal oxide-based nanozymes owing to their remarkable physicochemical properties in parallel with low cost, high stability, and easy storage. It is widely known that the deep study of catalytic activities and mechanism sheds significant influence on the applications of nanozymes. This review digs into the characteristics and intrinsic properties of metal- and metal oxide-based nanozymes, especially emphasizing their catalytic mechanism and recent applications in biological analysis, relieving inflammation, antibacterial, and cancer therapy. We also conclude the present challenges and provide insights into the future research of nanozymes constituted of metal and metal oxide nanomaterials.

Synthesis of magnetic core-shell amino adsorbent by using uniform design and response surface analysis (RSM) and its application for the removal of Cu2+, Zn2+, and Pb2

The magnetic Fe₃O₄ was synthesized by using a one-step solvothermal method. Then, anhydrous ethanol as a solvent, tetramethyl ammonium hydroxide (TMAOH) as an auxiliary agent, tetraethyl orthosilicate (TEOS) as a silicon source, and (3-aminopropyl) triethoxysilane (APTES) as amino source were used to prepare Fe₃O₄@mSiO₂-NH₂ by using the sol-gel method. Uniform design U14*(14⁵) and the response surface method (RSM) were used to optimize the synthesis ratio. According to the results of TEM, SEM, N₂ adsorption-desorption test, VSM, and XRD, it found that the best coating effect obtained when the relative molar ratio of TMAOH:TEOS:APTES:Fe₃O₄ was 5:4:6:0.45. The results of EDS and elemental analysis confirmed the success of amino group coating; VSM magnetization after surface modification was 32 emu/g; BET results show that specific surface area is 236 m²/g, size 5 nm, and the pore volume is 0.126 cm³/g. The removal of Cu²⁺, Zn²⁺, and Pb²⁺ by Fe₃O₄@mSiO₂-NH₂ was studied at the optimal initial pH value 6 of the adsorption test system. The isothermal adsorption results show that the Langmuir model and Redlich-Peterson model are more suitable than the Freundlich model to describe the adsorption behavior, and Cu²⁺, Zn²⁺, and Pb²⁺ adsorption is mainly single molecular layer. The maximum adsorption capacity qm of the Langmuir model for Cu²⁺, Zn²⁺, and Pb²⁺ removal was 48.04 mg/g, 41.31 mg/g, and 62.17 mg/g, respectively. The adsorption kinetic rates of Cu²⁺, Zn²⁺, and Pb²⁺ on Fe₃O₄@mSiO₂-NH₂ relatively more suitable for pseudo-second-order kinetic model, i.e., R², were ranged between 0.995 and 0.999, and the suitable reaction time was 60 min. These results proved that Fe₃O₄@m-SiO₂-NH₂ prepared by using this method is easy to synthesize, has easy recovery, is ecofriendly, and can be potential adsorbent for Cu²⁺, Zn²⁺, and Pb²⁺ removal.

Microfluidic synthesis of chitosan-coated magnetic alginate microparticles for controlled and sustained drug delivery

The present work aimed to assemble a simple, portable and economical L-junction microfluidic device to realize the adjustment and tunability of homogeneous round-shaped particles synthesis. In this study, we synthesize two kind of microparticles, including magnetic alginate microparticles (MAM) and chitosan-coated magnetic alginate (CMAM) used for controlling the drug release under a mild condition. Comparing to the traditional method, the MAM synthesized via this microfluidic approach has uniform size distribution, adjustable diameter as well as tunable magnetism. By exploring the amoxicillin as model drug, the MAM displays excellent pH-sensitive release, the effect of particle size on the drug release rate was investigated as well. The results show the smaller particles (220 μm) show a faster release rate than the bigger materials (1000 μm) due to their larger specific area, providing more frequency to interact with the reaction solution. The positive polyelectrolyte, chitosan, coated on the magnetic alginate surface endows CMAM time extension in drug release by two times, successfully achieving drug controlled and sustained release via the kinetics analysis. In summary, this microfluidic approach provides a convenient and efficient fluidic design for the well-controlled synthesis of micro-and nanoscale particles, which is a potential choice used for controlled and sustained drug release.

Process optimization and modeling of Pb(II) ions adsorption on chitosan-conjugated magnetite nano-biocomposite using response surface methodology

This study aimed to investigate the performance of a magnetic nano-biocomposite, chitosan conjugated magnetite nanoparticle (CH-MNP), for the removal of lead ions. The magnetite nanoparticles were synthesized through a controlled co-precipitation technique and were stabilized with citric acid. Subsequently, they were covalently bonded to chitosan via carbodiimide chemistry using EDAC/NHS activation. One of the notable advantages of this nano-biocomposite is its chemical conjugation, which does not have the weakness of the ultimate chitosan detachment of a physical bond and makes it an encouraging candidate for magnetic separation with no secondary waste production. The CH-MNPs had a diameter of ∼10 nm, with a saturation magnetization of 76.01 emu/g ensuring a superparamagnetic property. The response surface methodology (RSM) with a central composite design (CCD) framework was used for optimizing the adsorption process. The optimum conditions to achieve 92.15% of Pb(II) removal were found to be at a pH of 6.1 with the nano-adsorbent concentration of 1.04 g/L and a contact time of 59.92 min. Our adsorption isotherm data were fitted well with the Langmuir adsorption isotherm model, and the equilibrium data followed the pseudo-second-order kinetics and intraparticle diffusion kinetic model. The maximum Langmuir Pb(II) adsorption capacity was calculated to be 192.308 mg/g. These results suggest that the proposed synthetic nano-biocomposite is quite an ideal nano-adsorbent for Pb(II) removal in wastewater treatment technology.

Isolation of exosomes from whole blood by a new microfluidic device: proof of concept application in the diagnosis and monitoring of pancreatic cancer

BACKGROUND

Exosomes are endocytic-extracellular vesicles with a diameter around 100 nm that play an essential role on the communication between cells. In fact, they have been proposed as candidates for the diagnosis and the monitoring of different pathologies (such as Parkinson, Alzheimer, diabetes, cardiac damage, infection diseases or cancer).

RESULTS

In this study, magnetic nanoparticles (Fe3O4NPs) were successfully functionalized with an exosome-binding antibody (anti-CD9) to mediate the magnetic capture in a microdevice. This was carried out under flow in a 1.6 mm (outer diameter) microchannel whose wall was in contact with a set of NdFeB permanent magnets, giving a high magnetic field across the channel diameter that allowed exosome separation with a high yield. To show the usefulness of the method, the direct capture of exosomes from whole blood of patients with pancreatic cancer (PC) was performed, as a proof of concept. The captured exosomes were then subjected to analysis of CA19-9, a protein often used to monitor PC patients.

CONCLUSIONS

Here, we describe a new microfluidic device and the procedure for the isolation of exosomes from whole blood, without any need of previous isolation steps, thereby facilitating translation to the clinic. The results show that, for the cases analyzed, the evaluation of CA19-9 in exosomes was highly sensitive, compared to serum samples.

Understanding fluorometric interactions in ion-responsive sustainable polymer nanocomposite scaffolds

The fluorescent colour in biodegradable and biocompatible flexible polymer nanocomposite gels was modulated in order to gain insight into the interfacial interactions of functional scaffolds with metal ions. The hybrid nanomaterials were introduced into the polymer matrix to obtain mechanically robust porous morphologies where the intrinsic luminescence matrix was found to critically enhance the threshold of the visual detection limits. The quenching of fluorescence intensity has been predominantly attributed to the interactions of functional receptors of luminescent nanofillers with respect to the chromophores of the fluorescent matrix. The chromium ion is selected to understand the change in fluorescence intensity of the nanocomposite gel with the degree of metal ion adsorption. The number of functional nanomaterials loaded into the matrix and the luminescence nature of the base polymer are varied with the purpose of gaining insight into the remote sensing mechanism of the colorimetric fluorescent probe.

Well-Designed Au Nanorod-Doped Cu2O Core-Shell Nanocube-Embedded Reduced Graphene Oxide Composite for Efficient Removal of a Water Pollutant Dye

To ensure environmental safety, the removal of organic pollutants has gained increasing attention globally. We have synthesized uniform Au nanorod (NR)-doped Cu₂O core-shell nanocubes (CSNCs) via a seed-mediated route embedded on the surface of rGO sheets. The Au NRs@Cu₂O/rGO nanocomposite was characterized using various techniques such as transmission electron microscopy (TEM), atomic force microscopy (AFM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and Fourier-transform infrared (FT-IR) and Raman spectroscopies. The scanning TEM-energy-dispersive spectroscopy (STEM-EDS) elemental mapping of the AuNRs@Cu₂O/rGO nanocomposite indicates that the Au NR (40 nm) is fully covered with the Cu₂O particles (∼145 nm) as a shell. N₂ gas sorption analysis shows that the specific surface area of the composite is 205.5 m²/g with a mesoporous character. Moreover, incorporation of Au NRs@Cu₂O CSNCs increases the nanogaps around the nanoparticles and suppresses the stacking/bundling of rGO, which significantly influences the pore size and increase the surface area. A batch adsorption experiment was carried out under various parameters, such as the effect of pH, contact time, temperature, initial dye concentration, and adsorbent dosage, for the removal of methylene blue (MB) in aqueous solution. The high surface area and mesoporosity can cause the adsorption capacity to reach equilibrium within 20 min with a 99.8% removal efficiency. Both kinetic and isotherm data were obtained and fitted very well with the pseudo-second-order kinetic and Langmuir isotherm model. The Langmuir isotherm revealed an excellent dye sorption capacity of 243.9 mg/g at 298 K. Moreover, after five adsorption cycles, the dye removal efficiency decreased from 99 to 86%. This novel route paves a new path for heterogeneous adsorbent synthesis, which is useful for catalysis and electrochemical applications.

High adsorption capacity and super selectivity for Pb(Ⅱ) by a novel adsorbent: Nano humboldtine/almandine composite prepared from natural almandine

This study firstly reported a novel nano humboldtine/almandine composite (NHLA composite) prepared directly from almandine through one-pot method based on the interaction of almandine and oxalic acid. The formation of humboldtine/almandine binary phase from natural almandine was determined by X-ray diffraction. Analysis of scanning & transmission electron microscope showed that large amount of nano humboldtine with uniform size (average size of 15.59 nm) were loaded on the almandine sheets. Compared with raw minerals, Pb(Ⅱ) removal capacity of synthesized composite was significantly increased, demonstrating that the main active ingredient for Pb(Ⅱ) removal was humboldtine phase rather than almandine itself. Pb(Ⅱ) adsorption capacity was increased with the increasing of initial pH value or temperature. Langmuir isotherm and Pseudo-second order kinetic equation were well fitted with experimental results and the maximum Pb(Ⅱ) adsorption capacity from Langmuir isotherm was 574.71 mg/g at temperature of 25 °C. In addition, heavy metal removal experiments in coexisting systems of multiple heavy metal ions manifested that the composite had a high selectivity for Pb(Ⅱ) adsorption. Ion exchange, surface complexation and electrostatic interaction have involved in the Pb(Ⅱ) adsorption. The synthesized composite was considered as a low cost, high efficiency, super selectivity and easy to mass production material for Pb(Ⅱ) adsorption from solution.

Phosphorus and nitrogen transformation in antibiotic mycelial residue derived hydrochar and activated pyrolyzed samples: Effect on Pb (II) immobilization

In this study, lincomycin residue (LR, a type of antibiotic mycelial residue) derived hydrochar samples (LR-HCs) were obtained from hydrothermal carbonization (HTC), and pyrolysis applied to these LR-HCs to produce activated pyrolyzed samples (LR-APs). Transformation of phosphorus (P) and nitrogen (N) species during HTC and pyrolysis was of primary interest and characterized by several techniques. Nitrogen content of dry LR was calculated by elemental analysis, being 7.91 wt. %, decreasing to 2.51 after HTC and 1.12 wt. % after concesutive HTC and pyrolysis. FT-IR analysis provided evidence for amine groups in LR samples. XPS analysis described N species (Pyridinic-N, Amine-N, Protein-N, Pyrrolic-N, and Quaternary-N) and P species (ortho-P/pyro-P and Ar-P) in LR samples, effectively. Sequential extraction showed that the HTC and pyrolysis changed the proportion of the P species from labile (P-NaHCO₃ and P-NaOH) to stable ones (P-residue). Utilization and suitability of as-prepared LR-HCs and LR-APs for heavy metal Pb (II) immobilization show promising results. To help understand immobilization process, kinetic (pseudo-1st-order and pseudo-2nd-order) and isotherm (Freundlich) models were tested and verified. Results confirmed that P and N species were transformed during HTC and pyrolysis and that these processes lead to an advantageous effect on Pb (II) removal from solution.

Synthesis of diglycolic acid functionalized core-shell silica coated Fe3O4 nanomaterials for magnetic extraction of Pb(II) and Cr(VI) ions

Amine-terminated core-shell silica coated magnetite nanoparticles were functionalized with diglycolic acid for the first time to create acid moiety on the surface of the nanoparticles. The formation of magnetite nanoparticles was scrutinised through XRD, SEM, EDS, TEM, VSM and FTIR spectroscopy. The BET surface area of nano-sorbent was found to be 4.04 m2/g with pore size 23.68 nm. These nanomaterials were then utilized to remove the Pb(II) and Cr(VI) ions from their aqueous media and uptake of metal ions was determined by atomic absorption spectroscopy (AAS). A batch adsorption technique was applied to remove both ions at optimised pH and contact time with maximum adsorption efficiency for Pb(II) ions at pH 7 while for Cr(VI) ions at pH 3. Adsorption mechanism was studied using Langmuir and Freundlich isotherms and equilibrium data fitted well for both the isotherms, showing complex nature of adsorption comprising both chemisorption as well as physio-sorption phenomena. The nanosorbents exhibited facile separation by applying external magnetic field due to the ferrimagnetic behaviour with 31.65 emu/g saturation magnetization. These nanosorbents were also found to be used multiple times after regeneration.

Magnetic supramolecular polymer: Ultrahigh and highly selective Pb(II) capture from aqueous solution and battery wastewater

For the practical capture of heavy metal ions from wastewater, fabricating environmental friendly adsorbents with high stability and super adsorption capacity are pursuing issue. In this work, we develop magnetic supramolecular polymer composites (M-SMP) by using a simple two-step hydrothermal method. Systematical characterizations of morphological, chemical and magnetic properties were conducted to confirm the formation of M-SMP composites. The resulting M-SMP composites were applied to remove Pb(II) from aqueous solution and from real battery wastewater, and easy separation was achieved using a permanent magnet. By investigating the effects of various parameters, we optimized their operating condition for Pb(II) adsorption by the M-SMP. The uptake of Pb(II) onto M-SMP fitted well the pseudo-second-order and Langmuir isotherm models, and favourable thermodynamics showed a spontaneous endothermic process. The SMP endowed M-SMP with ultrahigh adsorption capacity for Pb(II) (946.9 mg g^-1 at pH = 4.0, T = 298 K), remarkable selectivity, satisfactory stability and desirable recyclability. In Pb-contaminated lead-acid battery industrial wastewater, the concentration of Pb(II) declined from 18.070 mg L^-1 to 0.091 mg L^-1, which meets the current emission standard for the battery industry. These merits, combined with simple synthesis and convenient separation, make M-SMP an outstanding scavenger for the elimination of industrial Pb(II) wastewater.

Excellent adsorptive performance of a new nanocomposite for removal of toxic Pb(II) from aqueous environment: Adsorption mechanism and modeling analysis

Herein, a novel nanocomposite (Fe₃O₄@TATS@ATA) was prepared and used for adsorptive removal of Pb(II) ions from aqueous environment. The magnetic nanocomposite (Fe₃O₄@TATS@ATA) was characterized using FTIR, TEM, SEM, EDX, element mapping analysis (EMA), TGA analysis, XRD patterns, VSM, BET analysis, XPS spectrum, and zeta potential. The FTIR study confirmed the modification of Fe₃O₄ nanoparticles with triaminetriethoxysilane and 2-aminoterephthalic acid while XPS analysis (with peaks at 283.6, 285.1, 286.3, 284.5.0, 288.4 eV) displayed the presence of CSi, CN, OCNH, CC/CC and OCO functional groups, respectively on Fe₃O₄@TATS@ATA. The BET surface area, average pore size, pore volume and magnetization saturation for Fe₃O₄@TATS@ATA were found to be 114 m²/g, 6.4 nm, 0.054 cm^-3/g, and 22 emu/g, respectively. The adsorption isotherm data showed that Pb(II) adsorption onto Fe₃O₄@TATS@ATA fitted to Langmuir and Dubinin-Raduskevich isotherm model due to better R² value which was greater than 0.9 and q_m of Pb(II) was 205.2 mg/g at pH 5.7 in 150 min. Adsorption kinetics data displayed that Pb(II) adsorption onto Fe₃O₄@TATS@ATA was fitted to the pseudo-second-order and Elovich kinetic models. Thermodynamic outcomes exhibited the exothermic and spontaneous nature of adsorption. Results showed that Fe₃O₄@TATS@ATA nanocomposite was promising material for efficient removal of toxic Pb(II) from aqueous environment.

A self-gating proton-coupled electron transfer reduction of hexavalent chromium by core-shell SBA-Dithiocarbamate chitosan composite

We have proposed a novel strategy for the reduction plus adsorption process for hexavalent chromium elimination by thiol functional hybrid materials through a self-gating process. Namely, we exploit that coating dithiocarbamate chitosan at the surface of SBA-15 affords a core-shell composite that undergoes reversible shape transformations while thiol functional groups acted as proton-coupled electron donor for [Cr₂O₇]^2-. The reduction of [Cr₂O₇]^2- to Cr³⁺ was highly efficient and exceptionally rapid, occurred within 5 min with the reduction amount of 899.66 mg of [Cr₂O₇]^2- / 1 g of nanocomposite as a record high value. During the reduction of [Cr₂O₇]^2-, thiol functional groups (-SH) were oxidized into disulfide linkages (SS), and simultaneously chitosan matrix turned into shrunken structure because of the consuming of protons, preventing any release of Cr³⁺. Disulfides can also be reversely reduced to thiols by thiosulphates (S₂O₃^2-), which was attractive for regeneration and recyclability of the nanocomposite. Moreover, the [Cr₂O₇]^2- elimination through self-gating process was highly selective against a huge concentration of background electrolytes. This alternative strategy ensures the outstanding and stable performance in applied fields, and could be conducted in various pollution control techniques like permeable reactive barriers.

Highly effective remediation of Pb(II) and Hg(II) contaminated wastewater and soil by flower-like magnetic MoS2 nanohybrid

The efficient enrichment and remediation of heavy metals from realistic wastewater and contaminated soil containing large excess of competitive ions remains a daunting challenge by far. In the present study, flower-like molybdenum disulfide decorated with iron oxide nanoparticles (MoS₂/Fe₃O₄) is designed via a two-step hydrothermal method and mainly applied in the removal of Hg(II) and Pb(II) ions in aqueous environment. Exhaustive morphological, chemical and magnetic characterizations verify the successful formation of magnetic MoS₂/Fe₃O₄. Batch adsorption experiments show that the obtained MoS₂/Fe₃O₄ nanohybrid enables efficient capture of Hg(II) and Pb(II) ions, accompanied by ease-of-separation from solution by simply applying a magnet. In this respect, high adsorption capacities (263.6 mg g^-1 for Pb(II) and 428.9 mg g^-1 for Hg(II)) can be gained under optimized conditions (pH = 5.0; 298 K; nanohybrid dosage: 0.8 g L^-1 and the contact time: 180 min). In addition, the effects of different parameters such as initial Pb(II)/Hg(II) concentration (50-500 mg L^-1), temperature (298, 308 and 318 K) and co-existing ions (Zn(II), Cu(II), Cd(II) and Mg(II)) were systematically probed. The favorable adsorption capacity, selectivity and recyclability mainly originates from the strong Hg²⁺/Pb²⁺···S^2- bonding interactions. Practical application potential of magnetic MoS₂/Fe₃O₄ nanohybrid in realistic lead-acid battery industry wastewater and Pb(II)-contaminated soil is further explored, achieving promising results with high Pb(II) removal efficiency of 99.63% for wastewater and 57.15% for soil. Simple preparation, easy separation and high adsorption capacity would foster thus-designed sulfide-based nanohybrid a promising adsorbent for heavy metal removal from wastewater and contaminated soil.

Efficient removal of lead ions from aqueous solutions using ZnSe/ZnO/Bio-CaCO3

The sheet-like adsorbent of the eggshell wastes was prepared by the thermal hydrolysis method. The structure of the adsorbent was characterized by scanning electron microscope, Brunauer-Emmett-Teller, X-ray diffraction, transmission electron microscope, and X-ray photoelectron spectrometer. The adsorption capacity was investigated in a Pb²⁺ solution. The effects of initial pH, salt concentration, contact time, and adsorbate concentration on the adsorption of lead ions were investigated in detail. The morphology of the adsorbent was sheet-like microspheres. Zinc selenide/zinc oxide could be uniformly loaded onto the eggshell waste surface, which could effectively enhance the specific surface area of the eggshell wastes. The adsorption kinetics and isotherm followed the pseudo-second-order and Langmuir-Freundlich isotherm model, respectively. The synthesized adsorbent showed a maximum lead adsorption capacity of 1,428.78 mg/g at room temperature. Ion-exchange was the main adsorption mechanism.

Synthesis of Fe3O4@PVBC-TMT nanoparticles for the efficient removal of heavy metals ions

Core–shell magnetic Fe₃O₄@PVBC–TMT (Fe₃O₄@polyvinylbenzyl chloride–trithiocyanuric acid) nanoparticles containing trithiocyanuric acid groups were fabricated and employed for the fast removal of heavy metals from an aquatic environment. The morphology, structure and properties of Fe₃O₄@PVBC–TMT nanoparticles were characterized by a series of modern analytical tools. The adsorption behavior of the Fe₃O₄@PVBC–TMT nanoparticles for heavy metals ions in aqueous solutions was investigated by batch experiments. The maximum removal capacities of the Fe₃O₄@PVBC–TMT nanoparticles toward Mn²⁺, Ni²⁺, Cu²⁺, Cd²⁺ and Pb²⁺ ions were 127.4, 146.6, 180.5, 311.5, and 528.8 mg g⁻¹, respectively. Importantly, it is found that Pb²⁺ ions can be completely and quickly removed by the Fe₃O₄@PVBC–TMT nanoparticles. The equilibrium was established within 6 min, and the removal efficiencies were found to be 99.9%, 99.8% and 99.5% for Pb²⁺ ions at the initial concentrations of 100 mg L⁻¹, 200 mg L⁻¹ and 300 mg L⁻¹, respectively. It is hoped that the core–shell magnetic Fe₃O₄@PVBC–TMT nanoparticles may find application in wastewater treatment.

Core–shell Fe₃O₄@PVBC–TMT nanoparticles were fabricated and served as a valid magnetic adsorbent for the removal of heavy metals ions.

Linear and nonlinear behavior of crosslinked chitosan/N-doped graphene quantum dot nanocomposite films in cadmium cation uptake

In this research, crosslinked nanocomposite (NC) films involving chitosan (CS) and various percentages of nitrogen-doped graphene quantum dot (NGQD) were prepared via ultrasonic acoustic accompanied by adding glutaraldehyde as a crosslinking agent (henceforth nominated as CCS/NGQD NC). The objective of this study is the design of a safe adsorbent of CCS/NGQD NC under easy and low-cost conditions to investigate the mechanisms of Cd(II) ion sorption and find an appropriate model for the kinetics of removal. By comparing adsorption ability of CCS/NGQD NC films 2, 5 and 8 wt% under the same conditions, the CCS NC film with 5 wt% of NGQD was selected as the best mass ratio to investigate the adsorption process. To understand the nature of the sorption behavior, the experimental data were used to calculate pseudo-first-order, pseudo-second-order, and intra-particle diffusion kinetic models, and various isotherm models in linear and nonlinear regression. In addition, some error functions were applied to detect, either linear or nonlinear model is suitable to examine the experimental data and prevent any huge mistakes. The linear Freundlich equation well describes the uptake of Cd(II) ion by CCS film and CCS/NGQD NC film 5 wt%. Based on linear Langmuir, the maximum adsorption capacities of CCS film and CCS/NGQD NC film 5 wt% were 34.46 and 35.00 mg·g^-1, respectively. Kinetic analysis indicates that the mechanism of removal is described by nonlinear pseudo-second order model for CCS film and linear pseudo-second order model for the CCS/NGQD NC film 5 wt%. Also, thermodynamic parameters were analyzed in different temperatures. The obtained thermodynamic values prove that Cd(II) ion adsorption on both adsorbents is feasible, spontaneous and endothermic.

In situ polymerization of magnetic graphene oxide-diaminopyridine composite for the effective adsorption of Pb(II) and application in battery industry wastewater treatment

The efficient removal of heavy metals from aqueous environment is imperative and challenging. A novel ternary composite constructed of diaminopyridine polymers, graphene oxide, and ferrite magnetic nanoparticles was designed by a facile in situ polymerization strategy for the removal of Pb(II) from aqueous solution. Detailed characterization of morphological, chemical, and magnetic properties was employed systematically to confirm the formation of the composite material. Batch adsorption experiment studies suggested that the composite was an excellent adsorbent for Pb(II) which was easily collected after use via exposure to an external magnetic field for 30 s. The effects of different parameters such as solution pH, adsorbent dosage, contact time, initial Pb(II) concentration, temperature, and co-existing ions were examined. The maximum adsorption capacity at pH = 5 was estimated to be 387.2 mg g^-1 at 298 K by the Langmuir isotherm model, accompanied by favorable adsorption recyclability according to the investigation of regeneration experiments. Thermodynamic studies revealed that the Pb(II) adsorption via our ternary composite was endothermic and spontaneous. The corresponding removal performance for effluent containing Pb(II) from the battery industry was successfully examined. The present results indicated that our designed adsorbent is beneficial to the practical Pb(II) removal in wastewater purification.

Conversion of phosphorus and nitrogen in lincomycin residue during microwave-assisted hydrothermal liquefaction and its application for Pb2+ removal

Treatment of antibiotic fermentative residue (AFR) produced from pharmaceutical industries and their application in the environment has been gaining researchers' interest. In this study, lincomycin residue (LMR, the type of AFR) was treated with microwave-assisted hydrothermal liquefaction (MW-HTL) in a temperature range 120-210 °C, transforming effect of phosphorus (P) and nitrogen (N) functional groups in LMR samples was characterized with elemental analysis, XRD, XPS, FT-IR, and P-extraction, and utilized LMR samples for Pb²⁺ removal from aqueous solutions. The temperature had a significant impact on P and N functional groups conversion justified by characterization techniques and also responsible for Pb²⁺ adsorption. LMR hydrochar produced at 210 °C was accounted highest Pb²⁺ adsorption capacity (57.4 mg g^-1), higher four folds than raw LMR (13.8 mg g^-1). To understand the mechanism and rate defining phase of adsorption equilibrium isotherm and kinetic models were applied systematically. Adsorption results of LMR and its derived hydrochar samples found connectivity with Langmuir and pseudo-first-order isotherm models. Adsorption mainly occurred as ion-exchange dependent on the substitution of metal ions (Pb²⁺) to Ca²⁺ ions present in P-materials, and surface adsorption dependent on surface functional groups of LMR samples. Better operation feasibility of MW-HTL treated LMR, elaboration of P and N conversion behavior and high sorption of Pb²⁺ ions could make LMR a frontrunner for heavy metals immobilization.

Preparation of Carboxymethyl Cellulose-Based Macroporous Adsorbent by Eco-Friendly Pickering-MIPEs Template for Fast Removal of Pb2+ and Cd2

Recently, Pickering high internal phase emulsions (Pickering HIPEs) have been widely used to fabricate macroporous materials. However, the high usage of poisonous organic solvent in HIPEs not only greatly increases the cost but also is harmful to human health and environment, which leads to limited large-scale applications. In this study, we prepared a novel monolithic macroporous material of carboxymethyl cellulose-g-poly(acrylamide)/montmorillonite (CMC-g-PAM/MMT) by the free radical polymerization via oil-in-water Pickering medium internal phase emulsions (Pickering MIPEs), which used the non-toxic and eco-friendly flaxseed oil as continuous phase, MMT, and Tween-20 (T-20) as stabilizer. The pore structure of the resulting macroporous materials could be tuned easily by adjusting the content of MMT, co-surfactant T-20, and the oil phase volume fraction. The maximal adsorption capacities of the prepared macroporous material for Pb²⁺ and Cd²⁺ were 456.05 and 278.11 mg/g, respectively, and the adsorption equilibrium can be reached within 30 min. Otherwise, the macroporous monolith exhibited excellent reusability through five adsorption–desorption cycles. Thus, the eco-friendly Pickering-MIPEs is a potential alternative method to be used to fabricate multi-porous adsorption materials for environmental applications.

Efficient removal of Pb(II) from aqueous solution by a novel ion imprinted magnetic biosorbent: Adsorption kinetics and mechanisms

It is vital to understand the adsorption mechanisms and identify the adsorption kinetics when applying an adsorbent to remove heavy metals from aqueous solution. A Pb(II) imprinted magnetic biosorbent (Pb(II)-IMB) was developed for the removal of Pb²⁺ via lead ion imprinting technology and crosslinking reactions among chitosan (CTS), Serratia marcescens and Fe₃O₄. The effect of different parameters such as solution pH, adsorbent dosage, selectivity sorption and desorption were investigated on the absorption of lead ion by Pb(II)-IMB. The adsorbent was characterized by a Brunauer-Emmett Teller (BET) analysis, X-ray diffraction (XRD), vibrating sample magnetometry (VSM), scanning electron microscopy (SEM) and energy dispersive spectrometry (EDS). The adsorption kinetics, equilibrium and thermodynamics of Pb(II)-IMB for Pb(II) were studied. The results of the abovementioned analyses showed that the adsorption kinetic process fit well with the second-order equation. The adsorption isotherm process of Pb(II) on the Pb(II)-IMB was closely related to the Langmuir model. Thermodynamic studies suggested the spontaneous and endothermic nature of adsorption of Pb(II) by Pb(II)-IMB. The adsorption mechanism of Pb(II)-IMB was studied by Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS). The results indicated that the nitrogen in the amino group and the oxygen in the hydroxyl group of Pb(II)-IMB were coordination atoms.

Fabrication of methyl acrylate and tetraethylenepentamine grafted magnetic chitosan microparticles for capture of Cd(II) from aqueous solutions

MCS-MA-TEPA microparticles, with 251.22 mg g^-1 of adsorption capacity for Cd(II), higher than most of the counterparts, were first fabricated by chemical coprecipitation, spray drying, and Michael addition reaction, without any cross-linker participation. These Fe₃O₄-nanoparticle-embedded microparticles of 5.95 μm in size, derived from modifications by methyl acrylate (MA) and tetraethylenepentamine (TEPA) on magnetic chitosan (MCS) microparticles, were of plum-pudding-like and wrinkle-like topography portrayed by TEM and SEM. Such features were beneficial to adsorbent recycling and Cd(II) capture. BET examinations illustrated 6.084 m² g^-1 of specific surface area, 0.015 mL g^-1 of pore volume, and 6.536 nm of pore diameter. FTIR, VSM, XRD, TEM-SAED, TG, and DTG characterizations were indicative of successful synthesis, satisfactory magnetism, well-defined architecture, and good thermostability. Optimal adsorption parameters for Cd(II) were determined via batch experiments. Thermodynamic parameters and adsorption data fitting implied an exothermic, spontaneous, monolayer, and chemisorption process. XPS analyses confirmed a potential adsorption mechanism that N and O atoms on microparticles chelated with Cd(II) ions in solutions. Additionally, MCS-MA-TEPA-Cd(II) microparticles were magnetically separated easily and had outstanding reusability even after five-time recycling, with a slight adsorption capability loss (< 12%). Altogether, MCS-MA-TEPA microparticles might serve as a promising adsorbent for contaminated water scavenging.

Biosynthesized Highly Stable Au/C Nanodots: Ideal Probes for the Selective and Sensitive Detection of Hg2+ Ions

The enormous ongoing industrial development has caused serious water pollution which has become a major crisis, particularly in developing countries. Among the various water pollutants, non-biodegradable heavy metal ions are the most prevalent. Thus, trace-level detection of these metal ions using a simple technique is essential. To address this issue, we have developed a fluorescent probe of Au/C nanodots (GCNDs-gold carbon nanodots) using an eco-friendly method based on an extract from waste onion leaves (Allium cepa-red onions). The leaves are rich in many flavonoids, playing a vital role in the formation of GCNDs. Transmission electron microscopy (TEM) and Scanning transmission electron microscopy-Energy-dispersive X-ray spectroscopy (STEM-EDS) elemental mapping clearly indicated that the newly synthesized materials are approximately 2 nm in size. The resulting GCNDs exhibited a strong orange fluorescence with excitation at 380 nm and emission at 610 nm. The GCNDs were applied as a fluorescent probe for the detection of Hg2+ ions. They can detect ultra-trace concentrations of Hg2+ with a detection limit of 1.3 nM. The X-ray photoelectron spectroscopy results facilitated the identification of a clear detection mechanism. We also used the new probe on a real river water sample. The newly developed sensor is highly stable with a strong fluorescent property and can be used for various applications such as in catalysis and biomedicine.