Novel Ruthenium Sensitizers with a Phenothiazine Conjugated Bipyridyl Ligand for High-Efficiency Dye-Sensitized Solar Cells

Iodide/triiodide redox shuttle-based additives for high-performance perovskite solar cells by simultaneously passivating the cation and anion defects

Halide perovskite solar cells (PSCs) have received remarkably increasing interests due to their facile fabrication procedures, use of cost-effective raw materials, and high power conversion efficiencies (PCEs) during the past 10 years. Nevertheless, the state-of-the-art organic-inorganic PSCs suffer from high defect concentration and inferior humid/thermal stability, significantly restricting the widespread applications of PSCs. More specifically, point defects including metallic lead (Pb⁰) and halide iodine (I⁰) are easily generated in Pb/I-based PSCs during fabrication processes and operational conditions due to the inferior interaction between the anions and cations in halide perovskites and promote detrimental carrier recombination and ion migration, leading to inferior PCEs and durability of the PSCs. Herein, to tackle the above-mentioned issues, iodide/triiodide (I^-/I₃^-) redox shuttles as a new additive were introduced to simultaneously passivate the cation and anion defects of methylammonium lead iodide (MAPbI₃)-based PSCs. In particular, I^-/I₃^- redox shuttles play a vital role in regenerating the cation (Pb⁰) and anion (I⁰) defects through the redox cycles of Pb⁰/Pb²⁺ and I⁰/I^-. Consequently, the cell with an optimized amount of I^-/I₃^- additive generated a superior PCE of 20.4%, which was 12% higher than the pristine device (18.2%). Furthermore, the introduction of the I^-/I₃^- additive remarkably improved the humid and thermal stability of MAPbI₃-based PSCs. This work manifests the importance of the design of redox shuttle-based additives to boost the efficiency and durability of organic-inorganic PSCs.

Aza-dipyrrinato ruthenium sensitizers for enhancement of Light-Harvesting ability of Dye-Sensitized solar cells

Three new aza-dipyrrinato ruthenium sensitizers AZA-BPY, AZA-BPY-NCS, and AZA-TER, have been designed and successfully synthesized. We have studied the effect of aza-dipyrrinato ligands on the photo-physical and electrochemical properties. The aza-dipyrrinato ancillary ligand exhibited enhancement in the light-harvesting capability compared to the traditional dipyrrinato ligand by coordinating ruthenium metal. The strong σ-donor characteristic of the aza-dipyrrinato ligand showed more adequate properties: red-shift in the absorption extended into the NIR region ( ≈ 1000 nm), and redox potentials compared to our earlier reported dipyrrinato sensitizer (GS3), which are confirmed by the UV-Vis absorption spectroscopy and cyclic voltammetry. All the characteristics features shows that these dyes are a good sensitizer candidate for DSSCs.

Light-Absorbing Pyridine Derivative as a New Electrolyte Additive for Developing Efficient Porphyrin Dye-Sensitized Solar Cells

To fabricate efficient dye-sensitized solar cells (DSSCs), 4-tert-butylpyridine (TBP) is commonly used as an additive in the electrolytes for improving the photovoltages (V_OC). However, TBP cannot play a positive role in improving the photocurrent (J_SC) because of the lack of absorption in the visible-wavelength range. We herein report a light-absorbing pyridine derivative N1 as an additive for the axial coordination with porphyrin dyes. N1 was synthesized by introducing a (bis(4-methoxyphenyl)amino)anthryl moiety into the para-position of pyridine via an acetylene bridge, and porphyrin dye XW64 containing meso-3,5-disubstituted phenyl groups was synthesized considering that the meta-substituted phenyl groups may induce weaker steric hindrance with the axial pyridyl ligand, as compared with wrapped and strapped porphyrin dyes. Thus, N1 was used as an electrolyte additive together with TBP. When optimized concentrations of 6 mM N1 and 0.5 M TBP were used for fabricating DSSCs based on XW64, enhanced photovoltaic performance was achieved, with J_SC, V_OC, and efficiency of 15.65 mA·cm^-2, 0.701 V, and 7.35%, respectively, superior to those of the corresponding DSSCs without using the additives (J_SC = 14.86 mA·cm^-2, V_OC = 0.599 V, and efficiency = 5.94%). The enhancement of J_SC can be ascribed to the improved light-harvesting ability induced by the axially coordinated N1. Furthermore, the two additives also can be used to fabricate efficient solar cells based on the wrapped porphyrin dye XW42, achieving high efficiency of 10.3%, indicative of their general applicability in fabricating high-performance DSSCs. These results indicate that the simultaneous employment of the traditional TBP additive and a pyridyl ligand with light-harvesting ability in the electrolyte for the axial coordination to a porphyrin dye is a promising approach for developing efficient DSSCs.

The molecular engineering, synthesis and photovoltaic studies of a novel highly efficient Ru(ii) complex incorporating a bulky TPA ancillary ligand for DSSCs: donor versus π-spacer effects

The IA-7 complex was applied in DSSCs.

Thiazolocatechol: Electron-Withdrawing Catechol Anchoring Group for Dye-Sensitized Solar Cells

Anchoring groups adopting a five-membered bidentate chelating are attractive to realize high power conversion efficiency (η) and long-term durability in dye-sensitized solar cells (DSSCs). In this regard, we chose catechol as an anchoring group that can adopt the chelating. However, the DSSCs with catechol-based sensitizers have never exceeded an η-value of 2 %. These poor photovoltaic performances may be associated with the electron-donating ability of the hydroxy groups in catechol. Considering these, we envisioned that fusing an electron-withdrawing thiazole moiety with a catechol anchoring group would improve its photovoltaic performance. Herein, we report a push-pull porphyrin sensitizer ZnPTC with a thiazolocatechol anchoring group. The DSSC with ZnPTC exhibited η=4.87 %. This value is the highest ever reported for catechol-anchor based DSSCs. Meanwhile, the long-term cell durability was not improved, although the robust anchoring properties were attained under harsh conditions.

Synthesis, Spectral, Electrochemical and Photovoltaic Studies of A3 B Porphyrinic Dyes having Peripheral Donors

Three new 'push-pull' A₃ B Zn(II)porphyrin dyes having meso-pyrenyl, carbazolyl and phenothiazine as electron donors (A) and phenylcarboxylic acid as acceptor/anchor (B) were synthesized and utilized for DSSC application. The spectral and electrochemical redox properties of these new dyes were studied and compared with trans-A₂ BC Zn(II) porphyrin dyes under similar experimental conditions. Red-shifted, broadened absorption peaks, lower fluorescence quantum yields, and shortened lifetimes were observed for the A₃ B dyes as compared to zinc tetraphenylporphyrin control, ZnTPP. DFT optimized structures suggested effective charge separation related to enhanced charge injection efficiency. Driving force for electron injection (ΔG_inj ) and dye regeneration (ΔG_reg ) calculated from the spectral and electrochemical studies predicted facile electron injection from excited dye into semiconductor TiO₂ in the constructed solar cells. Phenothiazine appended dye (KP-TriPTZ-Zn) showed the highest η value of 7.3 % for PCE with greater J_sc and V_oc values due to its better light harvesting ability and reduced dye aggregation as compared to other dyes. Our studies demonstrate that the dyes having multiple electron-donating groups exhibit higher photon-to-current conversion efficiency.

Renaissance of Fused Porphyrins: Substituted Methylene-Bridged Thiophene-Fused Strategy for High-Performance Dye-Sensitized Solar Cells

Over the last decades, porphyrin sensitizers have made a remarkable contribution to performance improvement in dye-sensitized solar cells (DSSCs). In particular, versatile push-pull-type porphyrin sensitizers have achieved power conversion efficiencies (η) over 10% as a result of their improved light-harvesting abilities. Meanwhile, aromatic ring fusion to a porphyrin core is an attractive option for highly efficient DSSCs because of its expanded π-conjugation and resultant red-shifted absorption. Nevertheless, aromatic-fused porphyrin sensitizers have suffered rather low cell performances due to their mismatch of HOMO-LUMO levels, high aggregation tendency, and short lifetime of the excited states. Bearing these in mind, we envisioned that the fusion of substituted methylene-bridged small aromatic ring to a porphyrin core would overcome these drawbacks, boosting the cell performance. Herein, we report a series of substituted methylene-bridged thiophene-fused porphyrins, AfZnP, DfZnP, and DfZnP- iPr. After optimization, DSSC with the donor-side thiophene-fused DfZnP- iPr achieved an η-value of 10.1%, which is comparable to that of DSSC with GY50 (10.0%), a representative high-performance push-pull-type porphyrin sensitizer. More importantly, cosensitization of DfZnP- iPr with a complementary sensitizer LEG4 further led to an η-value of 10.7%, which is the highest value ever reported for DSSCs with fused porphyrin sensitizers. Therefore, our strategy will reboot the exploration of aromatic-fused porphyrin sensitizers for high-performance DSSCs.

Efficient synthesis of novel cyclic fused-phenothiazines via domino cyclization of 2-(benzo[b][1,4]thiazin-3-ylidene)acetate, aromatic aldehydes and cyclic 1,3-diketones

Novel fused and bridged phenothiazine derivatives were selectively synthesized via an acid-promoted reaction of alkyl 2-(benzo[b][1,4]thiazin-3-ylidene)acetate, aromatic aldehydes and cyclic diketones under different reaction conditions.

Mechanistic Insights into the Stepwise Assembly of Ruthenium(II) Tris-heteroleptic Compounds

The ruthenium(II) tris-heteroleptic compounds cis-[Ru(NN)(dcbH₂)(NCS)₂], NN = polypyridyl ligand and dcbH₂ = 2,2'-bipyridine-4,4'-dicarboxylic acid, can be synthesized by a one-pot route starting from [Ru( p-cymene)Cl₂]₂, followed by the sequential addition of ligands. In this work, each synthetic step for the cis-[Ru(R-phen)(dcbH₂)(NCS)₂] (R = H, Me, Ph, MeO, or Cl) preparation was individually investigated, aiming to identify reaction intermediates and to establish correlations among temperature, reaction time, reactant concentration, and the identity of the substituent of the polypyridyl ligand with the kinetics of the reactions and distribution of the products. The first step is the cleavage of [Ru( p-cymene)Cl₂]₂, followed by the coordination of R-phen via an associative mechanism and establishment of a direct correlation between the electron-donating or electron-withdrawing character of R and the reaction rates. The second step is the conversion of [Ru(R-phen)( p-cymene)Cl]Cl to cis-[Ru(R-phen)(dcbH₂)Cl₂], and the rate-determining step is the formation of the intermediate [Ru(R-phen)Cl₂], which exhibits a low dependence on R. The last step is the substitution of Cl^- by NCS^-, and the N-bound isomer is the major product. The reaction temperature, time, and identity of R influence the relative distribution of the linkage isomers. The comprehension of each of these processes is a key factor to develop new strategies to optimize the one-pot synthetic route.

Research Progress on Photosensitizers for DSSC

Dye sensitized solar cells (DSSC) are considered one of the most promising photovoltaic technologies as an alternative to traditional silicon-based solar cells, for their compatibility with low-cost production methods, their peculiar optical and mechanical properties and the high indoor efficiency. Photosensitizers represent one of the most important components of a DSSC device and probably the most thoroughly investigated in the last twenty years, with thousands of dyes that have been proposed and tested for this kind of application. In this review we aimed to provide an overview of the three main classes of DSSC photosensitizers, namely ruthenium(II) polypyridyl complexes, Zn-porphyrin derivatives and metal-free organic dyes. After a brief introduction about the architecture and operational principles of a DSSC and the state of the art of the other main components of this type of device, we focused our discussion on photosensitizers. We have defined the numerous requirements DSSC photosensitizers should satisfy and have provided an overview of their historical development over the years; by examining specific dyes reported in the literature, we attempted to highlight the molecular design strategies that have been established for the optimization of their performance in real devices both in terms of efficiency (which recently reaches an outstanding 14.3%) and operational stability. Finally, we discussed, in the last section, the possible future developments of this intriguing technology.

Effects of ethynyl unit and electron acceptors on the performance of triazatruxene-based dye-sensitized solar cells

Effects of ethynyl unit and electron acceptors/anchors on the photovoltaic performance of triazatruxene-based organic dyes were systematically investigated.

π-Conjugated thiolate amplified spectrophotometry nitrite assay with improved sensitivity and accuracy

π-Conjugated thiolate amplified sensitive nitrite detection based on the π-conjugation enhanced molar absorption coefficient and the corresponding absorbance is presented.

Photovoltaic Properties and Long-Term Durability of Porphyrin-Sensitized Solar Cells with Silicon-Based Anchoring Groups

Anchoring groups for dye-sensitized solar cells (DSSCs) play a decisive role in high-power conversion efficiency (η) and long-term cell durability. To date, a carboxylic acid is the most widely used anchoring group for DSSCs. However, the carboxylic acid tends to dissociate from a TiO₂ surface during the cell operation as well as in the presence of water. Considering that the dye dissociation from TiO₂ leads to a decrease in the cell performance, stable anchoring groups are highly desirable to achieve long-term durability of DSSCs toward their practical application. In this study, we designed and synthesized a series of porphyrin dyes with the triethoxysilyl anchoring groups, ZnPSi1, ZnPSi2, and ZnPSi3, to evaluate the effects of the silicon-based anchoring group on cell durability and photovoltaic properties. The DSSCs based on ZnPSi1, ZnPSi2, and ZnPSi3 exhibited moderate η-values of 2.2, 4.7, and 2.3%, respectively. It is noteworthy that the η-value of the DSSC based on ZnPSi2 (4.7%) is the highest among DSSCs based on porphyrin dyes with silicon-based anchoring groups. The moderate η-values are mainly attributed to the low charge collection efficiency originating from the low surface coverage and plausible tilted geometry of the dyes on TiO₂. More importantly, we demonstrated that the DSSC based on ZnPSi2 revealed higher long-term cell durability under illumination than that based on reference porphyrin YD2 -o -C8 having a conventional carboxylic acid anchoring group.

A Hydroxamic Acid Anchoring Group for Durable Dye-Sensitized Solar Cells Incorporating a Cobalt Redox Shuttle

A hydroxamic acid group has been employed for the first time as an anchoring group for cobalt-based dye-sensitized solar cells (DSSCs). The porphyrin dye YD2-o-C8HA including a hydroxamic acid anchoring group exhibited a power conversion efficiency (η) of 6.4 %, which is close to that of YD2-o-C8, a representative porphyrin dye incorporating a conventional carboxylic acid. More importantly, YD2-o-C8HA was found to be superior to YD2-o-C8 in terms of both binding ability to TiO₂ and durability of cobalt-based DSSCs. Notably, YD2-o-C8HA photocells revealed a higher η-value (4.1 %) than YD2-o-C8 (2.8 %) after 500 h illumination. These results suggest that the hydroxamic acid can be used for DSSCs with other transition-metal-based redox shuttle to ensure high cell durability as well as excellent photovoltaic performance.

Combining Ruthenium(II) Complexes with Metal-Organic Frameworks to Realize Effective Two-Photon Absorption for Singlet Oxygen Generation

Singlet oxygen ((1)O2), as a reactive oxygen species, has garnered serious attention in physical, chemical, and biological studies. In this paper, we designed and synthesized a new type of singlet-oxygen generation system by exchanging cationic ruthenium complexes (RCs) into anionic bio-MOF-1. The resulting bio-MOF-1&RCs can be used as effective photocatalysts for generation of singlet oxygen under both single-photon and two-photon excitation. Especially, the excellent two-photon absorption (TPA) behavior of bio-MOF-1&RCs aroused our interest greatly because their two-photon absorption band lies in the optical window of biological tissue. Here, we measured the ability of bio-MOF-1&RCs to generate (1)O2 by irradiation under both 490 and 800 nm wavelength light in DMF. 1,3-Diphenylisobenzofuran (DPBF) and 2',7'-dichlorofluorescein (DCFH) were used as typical (1)O2 traps to detect and evaluate the efficiency of generation of (1)O2 under single-photon and two-photon excitation, respectively. Results indicated that bio-MOF-1&[Ru(phen)3](2+) was able to effectively generate (1)O2 under both conditions. Our work creates a novel synergistic TPA system with the excellent photophysical properties of RCs and the unique microporous structure benefit of MOFs, which may open a new avenue for creation of a cancer treatment system with both photodynamic therapy and chemotherapy.

Superior Light-Harvesting Heteroleptic Ruthenium(II) Complexes with Electron-Donating Antennas for High Performance Dye-Sensitized Solar Cells

Three heteroleptic polypyridyl ruthenium complexes, RC-41, RC-42, and RC-43, with efficient electron-donating antennas in the ancillary ligands were designed, synthesized, and characterized as sensitizers for dye-sensitized solar cell. All the RC dye sensitizers showed remarkable light-harvesting capacity and broadened absorption range. Significantly, RC-43 obtained the lower energy metal-ligand charge transfer (MLCT) band peaked at 557 nm with a high molar extinction coefficient of 27 400 M(-1) cm(-1). In conjunction with TiO2 photoanode of submicrospheres and iodide-based electrolytes, the DSSCs sensitizing with the RC sensitizers, achieved impressively high short-circuit current density (19.04 mA cm(-2) for RC-41, 19.83 mA cm(-2) for RC-42, and 20.21 mA cm(-2) for RC-43) and power conversion efficiency (10.07% for RC-41, 10.52% for RC-42, and 10.78% for RC-43). The superior performances of RC dye sensitizers were attributed to the enhanced light-harvesting capacity and incident-photon-to-current efficiency (IPCE) caused by the introduction of electron-donating antennas in the ancillary ligands. The interfacial charge recombination/regeneration kinetics and electron lifetime were further evaluated by the electrochemical impedance spectroscopy (EIS) and transient absorption spectroscopy (TAS). These data decisively revealed the dependences on the photovoltaic performance of ruthenium sensitizers incorporating electron-donating antennas.