Zinc-Containing Magnetic Oxides Stabilized by a Polymer: One Phase or Two?

Cr-Zn/Ni-Containing Nanocomposites as Effective Magnetically Recoverable Catalysts for CO2 Hydrogenation to Methanol: The Role of Metal Doping and Polymer Co-Support

CO2 hydrogenation to methanol is an important process that could solve the problem of emitted CO2 that contributes to environmental concern. Here we developed Cr-, Cr-Zn-, and Cr-Ni-containing nanocomposites based on a solid support (SiO2 or Al2O3) with embedded magnetic nanoparticles (NPs) and covered by a cross-linked pyridylphenylene polymer layer. The decomposition of Cr, Zn, and Ni precursors in the presence of supports containing magnetic oxide led to formation of amorphous metal oxides evenly distributed over the support-polymer space, together with the partial diffusion of metal species into magnetic NPs. We demonstrated the catalytic activity of Cr2O3 in the hydrogenation reaction of CO2 to methanol, which was further increased by 50% and 204% by incorporation of Ni and Zn species, respectively. The fine intermixing of metal species ensures an enhanced methanol productivity. Careful adjustment of constituent elements, e.g., catalytic metal, type of support, presence of magnetic NPs, and deposition of hydrophobic polymer layer contributes to the synergetic promotional effect required for activation of CO2 molecules as well. The results of catalytic recycle experiments revealed excellent stability of the catalysts due to protective role of hydrophobic polymer.

Chitosan as capping agent in a robust one-pot procedure for a magnetic catalyst synthesis

Here, we report a one-pot solvothermal method for the development of magnetically recoverable catalysts with Ru or Ag nanoparticles (NPs) capped by chitosan (CS), a derivative of natural chitin. The formation of iron oxide NPs was carried out in situ in the presence of CS and iron acetylacetonate in boiling triethyleneglycol (TEG) due to CS solubilization in warm TEG. Coordination with Ru or Ag species and the NP formation take place in the same reaction solution, eliminating intermediate steps. In optimal conditions the method developed allows stabilization of 2.2 nm monodisperse Ru NPs (containing both Ru⁰ and Ru⁴⁺ species) that are evenly distributed through the catalyst, while for Ag NPs, this stabilizing medium is inferior, leading to exceptionally large Ag nanocrystals. Catalytic testing of CS-Ru magnetically recoverable catalysts in the reduction of 4-nitrophenol to 4-aminophenol with excess NaBH₄ revealed that the catalyst with 2.2 nm Ru NPs exhibits the highest catalytic activity compared to samples with larger Ru NPs (2.9-3.2 nm). Moreover, this catalyst displayed extraordinary shelf-life in the aqueous solution (up to ten months) and excellent reusability in ten consecutive reactions with easy magnetic separation at each step which were assigned to its conformational rigidity at a constant pH. These characteristics as well as favorable environmental factors of the catalyst fabrication, make it promising for nitroarene reduction.

Improvements in the Organic-Phase Hydrothermal Synthesis of Monodisperse M x Fe3-x O4 (M = Fe, Mg, Zn) Spinel Nanoferrites for Magnetic Fluid Hyperthermia Application

In the quest for optimal heat dissipaters for magnetic fluid hyperthermia applications, monodisperse M _x Fe_3-x O₄ (M = Fe, Mg, Zn) spinel nanoferrites were successfully synthesized through a modified organic-phase hydrothermal route. The chemical composition effect on the size, crystallinity, saturation magnetization, magnetic anisotropy, and heating potential of prepared nanoferrites were assessed using transmission electron microscopy (TEM), dynamic light scattering, X-ray diffraction (XRD), thermogravimetric analysis (TGA), energy-dispersive X-ray spectroscopy (EDS), atomic absorption spectroscopy (AAS), X-ray photoelectron spectroscopy (XPS), and vibrating sample magnetometer (VSM) techniques. TEM revealed that a particle diameter between 6 and 14 nm could be controlled by varying the surfactant ratio and doping ions. EDS, AAS, XRD, and XPS confirmed the inclusion of Zn and Mg ions in the Fe₃O₄ structure. Magnetization studies via VSM revealed both the superparamagnetic nature of the nanoferrites and the dependence on substitution of the doped ions to the final magnetization. The broader zero-field cooling curve of Zn-doped Fe₃O₄ was related to their large size distribution. Finally, a maximum rising temperature (T _max) of 66 °C was achieved for an aqueous ferrofluid of nondoped Fe₃O₄ nanoparticles after magnetic field activation for 12 min.

Zn- and (Mn, Zn)-substituted versus unsubstituted magnetite nanoparticles: structural, magnetic and hyperthermic properties

In this work, we studied structural and magnetic properties of 18 nm sized Zn-substituted magnetite, 28 nm sized unsubstituted and 17 nm sized (Mn, Zn)-substituted iron oxide nanoparticles, synthesized by thermal decomposition method. Their features were examined by analyzing the x-ray diffraction data, ⁵⁷Fe Mössbauer spectra and magnetization measurements by SQUID interferometer. The microstructure was inspected comparing the different size and strain broadening models incorporated into Fullprof software. In terms of crystallinity and size dispersion, applied synthesis protocol shows superiority over decomposition of iron oleate and the co-precipitation synthesis route. The saturation magnetization at T = 5 K was found to be within the M _S = 91.2-98.6 A m² kg^-1 range, while at 300 K M _S of pure and Zn-substituted Fe₃O₄ nanoparticles is 83.6 and 86.2 A m² kg^-1, respectively. Effective magnetic anisotropy constant K _eff, estimated under slow measurements by SQUID, is below 20 kJ m^-3 in all three samples. Some preliminary measurements of the magnetic hyperthermia performance, expressed via specific absorption rate value showed that the best heating performances were displayed by 18 nm sized oleic acid-coated Zn_0.13Fe_2.87O₄ cubo-octahedrons with SAR ≅ 425 W/g_Fe at H ₀ = 20 kA m^-1 and f = 228 kHz.

Facile Synthesis of Magnetically Recoverable Pd and Ru Catalysts for 4-Nitrophenol Reduction: Identifying Key Factors

This paper reports the development of robust Pd- and Ru-containing magnetically recoverable catalysts in a one-pot procedure using commercially available, branched polyethyleneimine (PEI) as capping and reducing agent. For both catalytic metals, ∼3 nm nanoparticles (NPs) are stabilized in the PEI shell of magnetite NPs, whose aggregation allows for prompt magnetic separation. The catalyst properties were studied in a model reaction of 4-nitrophenol hydrogenation to 4-aminophenol with NaBH4. A similar catalytic NP size allowed us to decouple the NP size impact on the catalytic performance from other parameters and to follow the influence of the catalytic metal type and amount as well as the PEI amount on the catalytic activity. The best catalytic performances, the 1.2 min-1 rate constant and the 433.2 min-1 turnover frequency, are obtained for the Ru-containing catalyst. This is discussed in terms of stability of Ru hydride facilitating the surface-hydrogen transfer and the presence of Ru4+ species on the Ru NP surface facilitating the nitro group adsorption, both leading to an increased catalyst efficiency. High catalytic activity as well as the high stability of the catalyst performance in five consecutive catalytic cycles after magnetic separation makes this catalyst promising for nitroarene hydrogenation reactions.

Zn2+ Ion Surface Enrichment in Doped Iron Oxide Nanoparticles Leads to Charge Carrier Density Enhancement

Here, we report the development of monodisperse Zn-doped iron oxide nanoparticles (NPs) with different amounts of Zn (Zn _x Fe_3-x O₄, 0 < x < 0.43) by thermal decomposition of a mixture of zinc and iron oleates. The as-synthesized NPs show a considerable fraction of wüstite (FeO) which is transformed to spinel upon 2 h oxidation of the NP reaction solutions. At any Zn doping amounts, we observed the enrichment of the NP surface with Zn²⁺ ions, which is enhanced at higher Zn loadings. Such a distribution of Zn²⁺ ions is attributed to the different thermal decomposition profiles of Zn and Fe oleates, with Fe oleate decomposing at much lower temperature than that of Zn oleate. The decomposition of Zn oleate is, in turn, catalyzed by a forming iron oxide phase. The magnetic properties were found to be strongly dependent on the Zn doping amounts, showing the saturation magnetization to decrease by 9 and 20% for x = 0.05 and 0.1, respectively. On the other hand, X-ray photoelectron spectroscopy near the Fermi level demonstrates that the Zn_0.05Fe_2.95O₄ sample displays a more metallic character (a higher charge carrier density) than undoped iron oxide NPs, supporting its use as a spintronic material.

Magnetically Recoverable Catalysts: Beyond Magnetic Separation

Here, we discuss several important aspects of magnetically recoverable catalysts which can be realized when magnetic oxide nanoparticles are exposed to catalytic species and catalytic reaction media. In such conditions magnetic oxides can enhance performance of catalytic nanoparticles due to (i) electronic effects, (ii) catalyzing reactions which are beneficial for the final reaction outcome, or (iii) providing a capacity to dilute catalytic metal oxide species, leading to an increase of oxygen vacancies. However, this approach should be used when the magnetic oxides are stable in reaction conditions and do not promote side reactions. Incorporation of another active component, i.e., a graphene derivative, in the magnetically recoverable catalyst constitutes a smart design of a catalytic system due to synergy of its components, further enhancing catalytic properties.

Metal-Ion Distribution and Oxygen Vacancies That Determine the Activity of Magnetically Recoverable Catalysts in Methanol Synthesis

Here, we report on the development of novel Zn-, Zn-Cr-, and Zn-Cu-containing catalysts using magnetic silica (Fe₃O₄-SiO₂) as the support. Transmission electron microscopy, powder X-ray diffraction, and X-ray photoelectron spectroscopy (XPS) showed that the iron oxide nanoparticles are located in mesoporous silica pores and the magnetite (spinel) structure remains virtually unchanged despite the incorporation of Zn and Cr. According to XPS data, the Zn and Cr species are intermixed within the magnetite structure. In the case of the Zn-Cu-containing catalysts, a separate Cu₂O phase was also observed along with the spinel structure. The catalytic activity of these catalysts was tested in methanol synthesis from syngas (CO + H₂). The catalytic experiments showed an improved catalytic performance of Zn- and Zn-Cr-containing magnetic silicas compared to that of the ZnO-SiO₂ catalyst. The best catalytic activity was obtained for the Zn-Cr-containing magnetic catalyst prepared with 1 wt % Zn and Cr each. X-ray absorption spectroscopy demonstrated the presence of oxygen vacancies near Fe and Zn in Zn-containing, and even more in Zn-Cr-containing, magnetic silica (including oxygen vacancies near Cr ions), revealing a correlation between the catalytic properties and oxygen vacancies. The easy magnetic recovery, robust synthetic procedure, and high catalytic activity make these catalysts promising for practical applications.

Enhancing the Catalytic Activity of Zn-Containing Magnetic Oxides in a Methanol Synthesis: Identifying the Key Factors

A new family of Ni-, Co-, and Cr-doped Zn-containing magnetic oxide nanoparticles (NPs) stabilized by polyphenylquinoxaline (PPQ) and hyperbranched pyridylphenylene polymer (PPP) has been developed. These NPs have been synthesized by thermal decomposition of Zn and doping metal acetylacetonates in the reaction solution of preformed magnetite NPs, resulting in single-crystal NPs with spinel structure. For the PPQ-capped NPs, it was demonstrated that all three types of metal species (Fe, Zn, and a doping metal) reside within the same NPs, the surface of which is enriched with Zn and a doping metal, while the deeper layers are enriched with Fe. The Cr-doped NPs at the high Cr loading are an exception due to favored deposition of Cr on magnetite located in the NP depth. The PPP-capped NPs exhibit similar morphology and crystallinity; however, the detailed study of the NP composition was barred due to the high PPP amount retained on the NP surface. The catalyst testing in syngas conversion to methanol demonstrated outstanding catalytic properties of doped Zn-containing magnetic oxides, whose activities are dependent on the doping metal content and on the stabilizing polymer. The PPP stabilization allows for better access to the catalytic species due to the open and rigid polymer architecture and most likely optimized distribution of doping species. Repeat experiments carried out after magnetic separation of catalysts from the reaction mixture showed excellent catalyst stability even after five consecutive catalytic runs.

Environmental implications and applications of engineered nanoscale magnetite and its hybrid nanocomposites: A review of recent literature

This review focuses on environmental implications and applications of engineered magnetite (Fe3O4) nanoparticles (MNPs) as a single phase or a component of a hybrid nanocomposite that exhibits superparamagnetism and high surface area. MNPs are synthesized via co-precipitation, thermal decomposition and combustion, hydrothermal process, emulsion, microbial process, and green approaches. Aggregation/sedimentation and transport of MNPs depend on surface charge of MNPs and geochemical parameters such as pH, ionic strength, and organic matter. MNPs generally have low toxicity to humans and ecosystem. MNPs are used for constructing chemical/biosensors and for catalyzing a variety of chemical reactions. MNPs are used for air cleanup and carbon sequestration. MNP nanocomposites are designed as antimicrobial agents for water disinfection and flocculants for water treatment. Conjugated MNPs are widely used for adsorptive/separative removal of organics, dyes, oil, arsenic, phosphate, molybdate, fluoride, selenium, Cr(VI), heavy metal cations, radionuclides, and rare earth elements. MNPs can degrade organic/inorganic contaminants via chemical reduction or catalyze chemical oxidation in water, sediment, and soil. Future studies should further explore mechanisms of MNP interactions with other nanomaterials and contaminants, economic and green approaches of MNP synthesis, and field scale demonstration of MNP utilization.

Metal oxide–zeolite composites in transformation of methanol to hydrocarbons: do iron oxide and nickel oxide matter?

Novel, hierarchical zeolites modified with both Fe₃O₄ and Ni_xO_y nanoparticles have been developed and studied in the methanol-to-hydrocarbon process.