PdNP Decoration of Halloysite Lumen via Selective Grafting of Ionic Liquid onto the Aluminol Surfaces and Catalytic Application

Amine-Functionalized Natural Halloysite Nanotubes Supported Metallic (Pd, Au, Ag) Nanoparticles and Their Catalytic Performance for Dehydrogenation of Formic Acid

In today’s age of resource scarcity, the low-cost development and utilization of renewable energy, e.g., hydrogen energy, have attracted much attention in the world. In this work, cheap natural halloysite nanotubes (HNTs) were modified with γ-aminopropyltriethoxysilane (APTES), and the functionalized HNTs were used as to support metal (Pd, Au, Ag) catalysts for dehydrogenation of formic acid (DFA). The supports and fabricated catalysts were characterized with ICP, FT-IR, XRD, XPS and TEM. The functional groups facilitate the anchoring of metal particles to the supports, which brings about the high dispersion of metallic particles in catalysts. The catalysts show high activity against DFA and exhibit selectivity of 100% toward H2 at room temperature or less. The interactions between active centers and supports were investigated by evaluation and comparison of the catalytic performances of Pd/NH2-HNTs, PdAg/NH2-HNTs and PdAu/NH2-HNTs for DFA.

Halloysite Nanotubes: Smart Nanomaterials in Catalysis

The use of clay minerals as catalyst is renowned since ancient times. Among the different clays used for catalytic purposes, halloysite nanotubes (HNTs) represent valuable resources for industrial applications. This special tubular clay possesses high stability and biocompatibility, resistance against organic solvents, and most importantly be available in large amounts at a low cost. Therefore, HNTs can be efficiently used as catalysts themselves or supports for metal nanoparticles in several catalytic processes. This review reports a comprehensive overview of the relevant advances in the use of halloysite in catalysis, focusing the attention on the last five years.

Application of palladium nanoparticles supported organo-kaolinite for 4-chloro-2-nitroaniline catalytic reduction and electrochemical detection

Palladium nanoparticles (PdNPs) supported organo-kaolinite was used as a solid catalyst for the reduction and electrochemical detection of 4-chloro-2-nitroaniline (CNA). During the catalytic reduction in presence of NaBH4, the effects...

A sustainable gateway to access 1,8-dioxo-octahydroxanthene scaffolds via a surface-engineered halloysite-based magnetically responsive catalyst

A covalently modified, surface-engineered Cu(ii)@DCH@CPTMS@MHNT nanocatalyst is synthesized, which showed incredible catalytic activity in accessing a library of xanthene scaffolds.

Clay nanotube-metal core/shell catalysts for hydroprocesses

Catalytic hydroprocesses play a significant role in oil refining and petrochemistry. The tailored design of new metal nanosystems and optimization of their support, composition, and structure is a prospective strategy for enhancing the efficiency of catalysts. Mesoporous support impacts the active component by binding it to the surface, which leads to the formation of tiny highly dispersed catalytic particles stabilized from aggregation and with minimized leaching. The structural and acidic properties of the support are crucial and determine the size and dispersion of the active metal phase. Currently, research efforts are shifted toward the design of nanoscale porous materials, where homogeneous catalysts are displaced by heterogeneous. Ceramic materials, such as 50 nm diameter natural halloysite nanotubes, are of special interest for this. Much attention to halloysite clay is due to its tubular structure with a hollow 10-15 nm diameter internal cavity, textural characteristics, and different chemical compositions of the outer/inner surfaces, allowing selective nanotube modification. Loading halloysite with metal particles or placing them outside the tubes provides stable and efficient mesocatalysts. The low cost of this abundant nanoclay makes it a good choice for the scaled-up architectural design of core-shell catalysts, containing active metal sites (Au, Ag, Pt, Ru, Co, Mo, Fe₂O₃, CdS, CdZnS, Cu-Ni) located inside or outside the tubular template. These alumosilicate nanotubes are environment-friendly and are available in thousands of tons. Herein, we summarized the advances of halloysite-based composite materials for hydroprocesses, focusing on the selective binding of metal particles. We analyze the tubes' morphology adjustments and size selection, the physicochemical properties of pristine and modified halloysite (e.g., acid-etched or silanized), the methods of metal clusters formation, and their localization. We indicate prospective routes for the architectural design of stable and efficient nanocatalysts based on this safe and natural clay material.

Promotion effects of halloysite nanotubes on catalytic activity of Co3O4 nanoparticles toward reduction of 4-nitrophenol and organic dyes

Nanosized clay minerals have been widely used as efficient supports to immobilize catalyst nanoparticles. However, clay support-induced interactions and their influences on the catalyst structure and performance currently have not been fully understood. Here, Co₃O₄ nanoparticles supported on halloysite nanotubes (HNTs) were synthesized by a facile deposition-precipitation approach followed by thermal treatment. A series of characterization methods were employed for the Co₃O₄/HNTs hybrid nanostructure to identify its crystal phase, chemical composition, morphology, specific surface area, surface chemical states, and redox property. Characterization results showed that HNTs not only impacted the particle size of Co₃O₄ nanoparticles, but also modified surface chemical surface states of the later, which ultimately promoted the effective catalytic reduction of 4-nitrophenol (4-NP) and azo dyes with sodium borohydride. The interaction between HNTs and Co₃O₄ nanoparticles was found to shorten the induction period of the 4-NP reduction. Meanwhile, the Co₃O₄/HNTs catalyst for the 4-NP reduction achieved an apparent rate constant of 0.265 min^-1 and an activity parameter of 1.63 × 10⁴ min^-1 g^-1 as well as a turnover frequency of 4.37 min^-1. In addition, Co₃O₄/HNTs showed an improvement in reduction efficiency of the azo dyes when compared to bare Co₃O₄ nanoparticles.

Past, Present and Future Perspectives on Halloysite Clay Minerals

Halloysite nanotubes (HNTs), clay minerals belonging to the kaolin groups, are emerging nanomaterials which have attracted the attention of the scientific community due to their interesting features, such as low-cost, availability and biocompatibility. In addition, their large surface area and tubular structure have led to HNTs' application in different industrial purposes. This review reports a comprehensive overview of the historical background of HNT utilization in the last 20 years. In particular it will focus on the functionalization of the surfaces, both supramolecular and covalent, following applications in several fields, including biomedicine, environmental science and catalysis.

Formation of ruthenium nanoparticles inside aluminosilicate nanotubes and their catalytic activity in aromatics hydrogenation: the impact of complexing agents and reduction procedure

Ruthenium particles with size from 1 to 7 nm were formed by reduction of ruthenium complexes with urea, ethylenediaminetetraacetic acid, acetone azine, 1,2-Bis(2-furylmethylene)hydrazine) inside halloysite nanotubes. Catalysts of different morphology with Ru content from 0.75 to 0.93 %wt. were obtained using NaBH4 or H2 as reducing agents and tested in benzene hydrogenation as a model reaction. NaBH4 reduced catalysts showed similar catalytic activity with 100 % benzene conversion after 1.5 h. Reduction with H2 resulted in a decrease of catalytic activity for all samples. High benzene conversion was achieved only in the case of 1,2-Bis(2-furylmethylene)hydrazine and ethylenediaminetetraacetic acid. It was concluded that the thermal stability of complexing agents plays a key role in activity of catalysts reduced with H2.

Pt-Cu Bimetallic Nanoparticles Loaded in the Lumen of Halloysite Nanotubes

In this study, we demonstrate that Pt-Cu bimetallic nanoparticles with different compositions (Pt₃Cu, PtCu, PtCu₃) can be loaded in the lumen of halloysite nanotube (HNT) via a simple one-pot reduction. Increasing the pH of metallic precursor (H₂PtCl₆ and CuCl₂)/HNT solutions enhances the dissociation of H₂PtCl₆, advancing the association of [PtCl₆]^2- with the positively charged inner surface (Al-OH) of HNT. Moreover, the shrinkage of bond length from Pt-Cl in [PtCl₆]^2- to Pt-O in [PtCl₄(OH)₂]^2- due to pH-modulated ligand exchange may also assist Pt(IV) being trapped inside the halloysite. In the meantime, Cu(II) cations may complex with Pt(IV) anions via electrostatic force that would help the formation of Pt-Cu bimetallic nanoparticles inside the halloysite. The obtained PtCu₃@HNT system shows a significantly enhanced catalytic performance in the reduction of 4-nitrophenol by sodium borohydride, with a mass activity approximating 60 times higher than that of unloaded Pt nanoparticles. The high catalytic efficiency can be maintained after thermal treatment at 200 or 400 °C.

Preparation and characterization of porous starch reinforced with halloysite nanotube by solvent exchange method

The aim of this study was to improvement of adsorption capacity of porous starch (PS) by incorporation of halloysite nanotube (HNT). PS/HNT carrier was synthesized through the solvent exchange method. Various fabrication approaches for PS were introduced and different ethanol ratio (40, 60, 80, 100%), HNT concentration (0, 0.1, 0.2, 0.3, 0.4 and 0.5 mg/mL) and drying method (oven, freeze dryer and microwave) were applied. The results indicated that high ratio of ethanol created larger pores and also the best results were obtained from freeze-dried samples (p < 0.05). Incorporation of HNT could further improve the adsorption capacity. However, the best oil and water adsorption capacity were related to PS alone. The nitrogen adsorption-desorption measurement and scanning electron microscopy elucidated the porous structure of samples. The experimental data were fitted successfully by the Langmuir model rather than Freundlich isotherm. Also PS/HNT had higher apparent density and more negative zeta potential rather than PS. However, the DSC results showed the similar thermal patterns for PS and PS/HNT.

Chemical modification of halloysite nanotubes for controlled loading and release

Clay minerals have been used for medical purposes from ancient times. Among them, the halloysite nanotube, an aluminosilicate of the kaolin group, is an emerging nanomaterial which possesses peculiar chemical characteristics. By means of suitable modifications, such as supramolecular functionalization or covalent modifications, it is possible to obtain novel nanomaterials with tunable properties for several applications. In this context the covalent grafting of suitable organic moieties on the external surface or in the halloysite lumen has been exploited to improve the loading and release of several biologically active molecules. The resulting hybrid nanomaterials have been applied as drug carrier and delivery systems, as fillers for hydrogels, in tissue regeneration and in the gene delivery field. Furthermore the loading and release of specific molecules have been also investigated for environmental purposes. This review summarizes the main developments in the halloysite modifications in the last 20 years with a particular attention to the development in the past two years.

Au-Ag and Pt-Ag bimetallic nanoparticles@halloysite nanotubes: morphological modulation, improvement of thermal stability and catalytic performance

In this study, Au-Ag and Pt-Ag bimetallic nanocages were loaded on natural halloysite nanotubes (HNTs) via galvanic exchange based on Ag@HNT. By changing the ratio of Au to Ag or Pt to Ag in exchange processes, Au-Ag@HNT and Pt-Ag@HNT with different nanostructures were generated. Both Au-Ag@HNT and Pt-Ag@HNT systems showed significantly improved efficiency as peroxidase-like catalysts in the oxidation of o-phenylenediamine compared with monometallic Au@HNT and Pt@HNT, although inert Ag is dominant in the composition of both Au-Ag and Pt-Ag nanocages. On the other hand, loading on HNTs enhanced the thermal stability for every system, whether monometallic Ag nanoparticles, bimetallic Au-Ag or Pt-Ag nanocages. Ag@HNT sustained thermal treatment at 400 °C in nitrogen with improved catalytic performance, while Au-Ag@HNT and Pt-Ag@HNT maintained or even had slightly enhanced catalytic efficiency after thermal treatment at 200 °C in nitrogen. This study demonstrated that natural halloysite nanotubes are a good support for various metallic nanoparticles, improving their catalytic efficiency and thermal stability.

Smart H2O2-Responsive Drug Delivery System Made by Halloysite Nanotubes and Carbohydrate Polymers

A novel chemical hydrogel was facilely achieved by coupling 1,4-phenylenebisdiboronic acid modified halloysite nanotubes (HNTs-BO) with compressible starch. The modified halloysite nanotubes (HNTs) and prepared hydrogel were characterized by solid-state nuclear magnetic resonance (NMR), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and transmission electron microscope (TEM). The linkage of B-C in the hydrogel can be degraded into B-OH and C-OH units in the presence of H₂O₂ and result in the degradation of the chemical hydrogel. Pentoxifylline was loaded into the lumen of the HNTs-BO, and then gave the pentoxifylline-loaded hydrogel. The drug release profile shows that it was no more than 7% dissolved when using phosphate buffer solution (PBS) as the release medium. Notably, a complete release (near 90%) can be achieved with the addition of H₂O₂ ([H₂O₂] = 1 × 10^-4 M), suggesting a high H₂O₂ responsiveness of the as-formed hydrogel. The drug release results also show that the "initial burst release" can be effectively suppressed by loading pentoxifylline inside the lumen of the HNTs rather than embedding the drug in the hydrogel network. The drug-loaded hydrogel with H₂O₂-responsive release behavior may open up a broader application in the field of biomedicine.

Synthesis and catalytic application of palladium nanoparticles supported on kaolinite-based nanohybrid materials

Modified kaolinite-supported palladium nanoparticles displayed excellent catalytic activity for the Heck and the Suzuki–Miyaura coupling reactions.