Reversible and Nonvolatile Modulations of Magnetization Switching Characteristic and Domain Configuration in L10-FePt Films via Nonelectrically Controlled Strain Engineering

Advances in Emerging Photonic Memristive and Memristive-Like Devices

Possessing the merits of high efficiency, low consumption, and versatility, emerging photonic memristive and memristive-like devices exhibit an attractive future in constructing novel neuromorphic computing and miniaturized bionic electronic system. Recently, the potential of various emerging materials and structures for photonic memristive and memristive-like devices has attracted tremendous research efforts, generating various novel theories, mechanisms, and applications. Limited by the ambiguity of the mechanism and the reliability of the material, the development and commercialization of such devices are still rare and in their infancy. Therefore, a detailed and systematic review of photonic memristive and memristive-like devices is needed to further promote its development. In this review, the resistive switching mechanisms of photonic memristive and memristive-like devices are first elaborated. Then, a systematic investigation of the active materials, which induce a pivotal influence in the overall performance of photonic memristive and memristive-like devices, is highlighted and evaluated in various indicators. Finally, the recent advanced applications are summarized and discussed. In a word, it is believed that this review provides an extensive impact on many fields of photonic memristive and memristive-like devices, and lay a foundation for academic research and commercial applications.

Operating interfaces to synthesize L10-FePt@Bi-rich nanoparticles by modifying the heating process

A facile strategy to operate interfaces when synthesizing L1₀-FePt@Bi-rich nanoparticles (NPs) has been proposed. Two interfaces are indispensable to obtain the high ordering L1₀-FePt structure. One is the mismatched interfaces between the initial γ-PtBi₂ nuclei and the disordered fcc-FePt phase. The other is the in situ grown coherent interfaces between the L1₀-FePt and Bi-rich phases. Increasing the heating rates when the temperature rises from 120 °C to 310 °C benefits the formation of mismatched interfaces and improves the uniformity of phases and composition in NPs. Reducing the heating rate at higher temperature ensures sufficient time for Bi to diffuse across the coherent interface, which facilitates the disorder-order transition of L1₀-FePt NPs. This study provides a new perspective on operating interfaces during the wet-chemical synthesis process.

Dependence of the Growth Mode in Epitaxial FePt Films on Surface Free Energy

Epitaxial thin films of L1₀-ordered FePt alloys are one of the most important materials in magnetic recording and spintronics applications due to their large perpendicular magnetic anisotropy (PMA). The key to the production of these required superior properties lies in the control of the growth mode of the films. Further, it is necessary to distinguish between the effect of lattice mismatch and surface free energy on the growth mode because of their strong correlation. In this study, the effect of surface free energy on the growth mode of FePt epitaxial films was investigated using MgO, NiO, and MgON surfaces with almost the same lattice constant to exclude the effect of lattice mismatch. It was found that the growth mode can be tuned from a three-dimensional (3D) island mode on MgO to a more two-dimensional (2D)-like mode on MgON and NiO. Contact angle measurements revealed that MgON and NiO show larger surface free energy than MgO, indicating that the difference in the growth mode is due to their larger surface free energy. In addition, MgON was found to induce not only a flat surface as FePt grown on SrTiO₃ (STO), which has a small lattice mismatch, but also a larger PMA than that of STO/FePt. As larger lattice mismatch is favored to induce a higher PMA into the FePt films, MgO substrates are exclusively used, but 3D island growth is indispensable. This work demonstrates that tuning the surface free energy enables us to achieve a large PMA and flat film surface in FePt epitaxial films on MgO. The results also indicate that modifying the surface free energy is pertinent for the flexible functional design of thin films.

Switchable Magnetic Anisotropy of Ferromagnets by Dual-Ion-Manipulated Orbital Engineering

Tailoring magnetic anisotropy of ferromagnetic films is a critical issue in constructing energy-efficient and high-density magnetic memory devices. Presently, the effective tunability was focused on a single-ion-manipulated electronic structure evolution. Here, we reported a new strategy of dual-ion-tuned orbital structure and magnetic anisotropy of ferromagnetic films. N-doped Fe/MgO bilayer films were deposited on shape memory alloy substrates which can generate a significant lattice strain on the films. Before the N ions participate into the manipulation, the Fe/MgO film shows an in-plane magnetic anisotropy, which may be due to excessive Fe-O orbital hybridization. Interestingly, the N and O ions synergistically manipulate electronic coordination of the Fe layer, which can be further modified by the lattice strain through a charge transfer among N-Fe-O. Under such effect, the magnetic anisotropy of the film is switchable from in-plane to perpendicular magnetic anisotropy (PMA). The X-ray line dichroism (XLD) characterization reveals that the anisotropy regulation is related to Fe 3d orbital evolution: N-Fe orbital hybridization promotes the Fe d_z² orbital occupation effectively, which is beneficial in increasing PMA by strengthening Fe-O orbital hybridization along the out-of-plane direction. However, the compressive strain induces a N-Fe-O charge transfer and reduces the Fe d_z² electronic occupation, which weakens the PMA of films. These findings provide a new dimensionality for regulating orbital performance of ferromagnetic materials and developing strain-assisted memory devices.

Strain Engineering to Modify the Electrochemistry of Energy Storage Electrodes

Strain engineering has been a critical aspect of device design in semiconductor manufacturing for the past decade, but remains relatively unexplored for other applications, such as energy storage. Using mechanical strain as an input parameter to modulate electrochemical potentials of metal oxides opens new opportunities intersecting fields of electrochemistry and mechanics. Here we demonstrate that less than 0.1% strain on a Ni-Ti-O based metal-oxide formed on superelastic shape memory NiTi alloys leads to anodic and cathodic peak potential shifts by up to ~30 mV in an electrochemical cell. Moreover, using the superelastic properties of NiTi to enable strain recovery also recovers the electrochemical potential of the metal oxide, providing mechanistic evidence of strain-modified electrochemistry. These results indicate that mechanical energy can be coupled with electrochemical systems to efficiently design and optimize a new class of strain-modulated energy storage materials.