Plasmonically Enhanced Photocatalytic Hydrogen Production from Water: The Critical Role of Tunable Surface Plasmon Resonance from Gold-Silver Nanoshells

Honeycomb-like Ag Nanocavity Array for SERS Observations Using Plasmon-Mediated Chemical Reactions

Organized two-dimensional polystyrene bead arrays perform ion etching, and protruding nanostructures are created on polystyrene beads due to the shadow effects from the ring beads, leading to nucleus selection and growth in Au nanostructure deposition. Ag nanostructures are prepared via plasmon-mediated chemical reactions (PMCRs), leading to the Ag nanocavity geometry of the honeycomb pattern when the etching time and Ag growth time are tuned. Due to the strong electromagnetic coupling, the Ag honeycomb-shaped nanocavity array works as the SERS substrate with high sensitivity and good repeatability, which is used to detect thiram pesticide residues with a concentration down to 10-9 M.

Bimetallic nanocomposite (Ag-Au, Ag-Pd, Au-Pd) synthesis using gum kondagogu a natural biopolymer and their catalytic potentials in the degradation of 4-nitrophenol

Bimetallic nanoparticles (BNPs) constitute two different metal elements and exhibit relatively superior mechanistic and catalytic efficacies owing to their synergistic functions over monometallic nanoparticles. In the present study various bimetallic Ag-Au, Ag-Pd, Au-Pd nanoparticles were synthesized using a natural biopolymer gum kondagogu (GK) as a reducing and capping agent, by a simple and cost-effective method. The synthesized BNPs when characterized using UV-vis spectroscopy revealed a specific surface plasmon resonance band (SPR) of each nanocomposite. The average particle size of Ag-Au, Ag-Pd, and Au-Pd BNPs was found to be 23 ± 10.3, 21 ± 7.6, and 23 ± 9.4 nm respectively based on transmission electron microscopy analysis. Surface morphology and functional groups on the gum matrix of GK-BNPs were analyzed by XRD and FT-IR respectively. The bimetallic nanocomposites were evaluated for their catalytic reduction of 4-nitrophenol (4-NP) to 4-aminophenol in the presence of NaBH₄. The kinetic studies performed, depicted rate constants for Ag-Au, Ag-Pd, and Au-PdNPs as 0.31, 0.39, and 0.28 min^-1 respectively. The catalytic efficiencies of three bimetallic nanocomposites were of the following order Ag-Pd > Ag-Au > Au-Pd. This study establishes the catalytic potentials of the three different bimetallic nanocomposites in the reduction of 4-NP an environmental pollutant, and the impact of their synergistic property.

Tuning the Crystallinity and Coverage of SiO2-ZnIn2S4 Core-Shell Nanoparticles for Efficient Hydrogen Generation

The coverage, thickness, and crystallinity of ZnIn₂S₄ (ZIS) shells on SiO₂ core nanoparticles (SiO₂@ZIS) were systematically investigated using microwave-assisted solvothermal methods aided by the addition of acid in ethanolic medium. The surface modification of the SiO₂ cores with (3-mercaptopropyl)trimethoxysilane was found to be critical to generate a homogeneous coverage of ZnIn₂S₄. The SiO₂@ZIS core-shell nanoparticles exhibited the best coverage but poor crystallinity when synthesized in pure ethanol, whereas best crystallinity but poor coverage was observed when synthesized in an aqueous solution. The addition of selected amounts of acid (HCl) led to improved crystallinity in the ethanolic medium. The thickness of the ZIS shell could be controlled in an ethanolic solution by judiciously varying the amounts of acid and the concentration of the ZIS precursor. Increasing the concentration of the ZIS precursor to twice the standard concentration in ethanolic solution with the addition of 100 μL of HCl afforded better crystallinity, homogeneous coverage, and optimal photocatalytic hydrogen production.

Hollow Gold-Silver Nanoshells Coated with Ultrathin SiO2 Shells for Plasmon-Enhanced Photocatalytic Applications

This article details the preparation of hollow gold-silver nanoshells (GS-NSs) coated with tunably thin silica shells for use in plasmon-enhanced photocatalytic applications. Hollow GS-NSs were synthesized via the galvanic replacement of silver nanoparticles. The localized surface plasmon resonance (LSPR) peaks of the GS-NSs were tuned over the range of visible light to near-infrared (NIR) wavelengths by adjusting the ratio of silver nanoparticles to gold salt solution to obtain three distinct types of GS-NSs with LSPR peaks centered near 500, 700, and 900 nm. Varying concentrations of (3-aminopropyl)trimethoxysilane and sodium silicate solution afforded silica shell coatings of controllable thicknesses on the GS-NS cores. For each type of GS-NS, scanning electron microscopy (SEM) and transmission electron microscopy (TEM) images verified our ability to grow thin silica shells having three different thicknesses of silica shell (~2, ~10, and ~15 nm) on the GS-NS cores. Additionally, energy-dispersive X-ray (EDX) spectra confirmed the successful coating of the GS-NSs with SiO₂ shells having controlled thicknesses. Extinction spectra of the as-prepared nanoparticles indicated that the silica shell has a minimal effect on the LSPR peak of the gold-silver nanoshells.

Optically Tunable Tin Oxide-Coated Hollow Gold-Silver Nanorattles for Use in Solar-Driven Applications

Core@shell metal nanoparticles have emerged as promising photocatalysts because of their strong and tunable plasmonic properties; however, marked improvements in photocatalytic efficiency are needed if these materials are to be widely used in practical applications. Accordingly, the design of new and functional light-responsive nanostructures remains a central focus of nanomaterial research. To this end, we report the synthesis of nanorattles comprising hollow gold-silver nanoshells encapsulated within vacuous tin oxide shells of adjustable thicknesses (∼10 and ∼30 nm for the two examples prepared in this initial report). These composite nanorattles exhibited broad tunable optical extinctions ranging from ultraviolet to near-infrared spectral regions (i.e., 300-745 nm). Zeta potential measurements showed a large negative surface charge of approximately -35 mV, which afforded colloidal stability to the nanorattles in aqueous solution. We also characterized the nanorattles structurally and compositionally using scanning electron microscopy, transmission electron microscopy, and energy-dispersive X-ray spectroscopy. Futhermore, finite-difference time-domain simulation and photoluminescence properties of the composited nanoparticles were investigated. Collectively, these studies indicate that our tin oxide-coated hollow gold-silver nanorattles are promising candidates for use in solar-driven applications.

Ultrasonic Influence on Plasmonic Effects Exhibited by Photoactive Bimetallic Au-Pt Nanoparticles Suspended in Ethanol

The optical behavior exhibited by bimetallic nanoparticles was analyzed by the influence of ultrasonic and nonlinear optical waves in propagation through the samples contained in an ethanol suspension. The Au-Pt nanoparticles were prepared by a sol-gel method. Optical characterization recorded by UV-vis spectrophotometer shows two absorption peaks correlated to the synergistic effects of the bimetallic alloy. The structure and nanocrystalline nature of the samples were confirmed by Scanning Transmission Electron Microscopy with X-ray energy dispersive spectroscopy evaluations. The absorption of light associated with Surface Plasmon Resonance phenomena in the samples was modified by the dynamic influence of ultrasonic effects during the propagation of optical signals promoting nonlinear absorption and nonlinear refraction. The third-order nonlinear optical response of the nanoparticles dispersed in the ethanol-based fluid was explored by nanosecond pulses at 532 nm. The propagation of high-frequency sound waves through a nanofluid generates a destabilization in the distribution of the nanoparticles, avoiding possible agglomerations. Besides, the influence of mechanical perturbation, the container plays a major role in the resonance and attenuation effects. Ultrasound interactions together to nonlinear optical phenomena in nanofluids is a promising alternative field for a wide of applications for modulating quantum signals, sensors and acousto-optic devices.

Synthesis and biological function of Nickel and Copper nanoparticles

Nickel and Copper nanoparticles were synthesized by simple chemical method and studied for antimicrobial activities. The size of synthesized Nickel and Copper nanoparticles was found to be 24.00 nm and 13.13 nm respectively. The XRD analysis reveals the crystal system of Nickel and Copper nanoparticles. Copper nanoparticles were found orthorhombic whereas the nickel nanoparticles were monoclinic. The antimicrobial activities of Nickel and Copper nanoparticles dispersed in DMSO was investigated. Comparative sensitivity test of these synthesized nanoparticles was carried out against three pathogenic micro-organisms (Gram negative bacteria), viz. Escherichia coli, Klebsiella pneumoniae and Pneumonia Typhus, using agar diffusion cup plate method. Copper and Nickel nanoparticles have shown appreciable sensitivity at 100 μg/ml against all test micro-organisms. Comparatively, Copper nanoparticles were found to exhibit higher zone of inhibition (ZOI) than Nickel nanoparticles.

Porous silver-coated pNIPAM-co-AAc hydrogel nanocapsules

This paper describes the preparation and characterization of a new type of core-shell nanoparticle in which the structure consists of a hydrogel core encapsulated within a porous silver shell. The thermo-responsive hydrogel cores were prepared by surfactant-free emulsion polymerization of a selected mixture of N-isopropylacrylamide (NIPAM) and acrylic acid (AAc). The hydrogel cores were then encased within either a porous or complete silver shell for which the localized surface plasmon resonance (LSPR) extends from visible to near-infrared (NIR) wavelengths (i.e., λ_max varies from 550 to 1050 nm, depending on the porosity), allowing for reversible contraction and swelling of the hydrogel via photothermal heating of the surrounding silver shell. Given that NIR light can pass through tissue, and the silver shell is porous, this system can serve as a platform for the smart delivery of payloads stored within the hydrogel core. The morphology and composition of the composite nanoparticles were characterized by SEM, TEM, and FTIR, respectively. UV-vis spectroscopy was used to characterize the optical properties.

Silver-Free Gold Nanocages with Near-Infrared Extinctions

This article reports the preparation of silver-free Au nanocages from cubic palladium templates. Pd nanocubes were subjected to galvanic replacement with Au³⁺ to produce Pd@Au nanocages having tunable dimensions (i.e., edge length, gold layer thickness, and hollow pore size), which allowed selectable positioning of the optical extinction maxima from the visible to the near infrared. These new nanocages circumvent the problems associated with previous Ag-derived gold alloy nanocages, which suffer from the toxicity of residual silver and the possible fragmentation of such alloyed nanostructures, thereby limiting their potential applications. In contrast, the present materials represent stable, nontoxic, tunable, and hollow plasmonic nanostructures.

Preparation of a Fe2O3/MIL-53(Fe) composite by partial thermal decomposition of MIL-53(Fe) nanorods and their photocatalytic activity

A Fe₂O₃/MIL-53(Fe) composite (89% MIL-53(Fe), 11% Fe₂O₃) and Fe₂O₃ were prepared by partial and complete thermal decomposition of MIL-53(Fe).

Recent advances in non-metal modification of graphitic carbon nitride for photocatalysis: a historic review

This review provides a comprehensive survey and critical comments on the development of photocatalysts with a focus on the metal-free materials.