Smart Macroporous IPN Hydrogels Responsive to pH, Temperature, and Ionic Strength: Synthesis, Characterization, and Evaluation of Controlled Release of Drugs

Environmentally Benign Freeze-dried Biopolymer-Based Cryogels for Textile Wastewater Treatments: A review

Motivated by sustainability and environmental protection, great efforts have been paid towards water purification and attaining complete decolorization and detoxification of polluted water effluent. Textile effluent, the main participant in water pollution, is a complicated mixture of toxic pollutants which seriously impact human health and the entire ecosystem. Developing effective materials for potential removal of the water contaminants is urgent. Recently, cryogels have been applied in wastewater sectors due to their unique physiochemical attributes(e.g. high surface area, lightweight, porosity, swelling-deswelling, and high permeability). These features robustly affected the cryogel's performance, as adsorbent material, particularly in wastewater sectors. This review serves as a detailed reference to the cryogels derived from biopolymers and applied as adsorbents for the purification of textile drainage. We displayed an overview of: the existing contaminants in textile effluents (dyes and heavy metals), their sources, and toxicity; advantages and disadvantages of the most common treatment techniques (biodegradation, advanced chemical oxidation, membrane filtration, coagulation/flocculation, adsorption). A simple background about cryogels (definition, cryogelation technique, significant features as adsorbents, and the adsorption mechanisms) is also discussed. Finally, the bio-based cryogels dependent on biopolymers such as chitosan, xanthan, cellulose, PVA, and PVP, are fully discussed with evaluating their maximum adsorption capacity.

DNA-functionalized cryogel based colorimetric biosensor for sensitive on-site detection of aflatoxin B1 in food samples

Hydrogel biosensors present numerous advantages in food safety analysis owing to their remarkable biocompatibility, cargo-loading capabilities and optical properties. However, the current drawbacks (slow target responsiveness and poor mechanical strength) restricted their further utilization at on-site detection of targets. To address these challenges, a DNA-functionalized cryogel with hierarchical pore structures is constructed to improve the reaction rate and the robustness of hydrogel biosensor. During cryogel preparation, ice crystals serve as templates, shaping interconnected hierarchical microporous structures to enhance mass transfer for faster responses. Meanwhile, in the non-freezing zone, concentrated monomers create a dense cross-linked network, strengthening cryogel matrix strength. Accordingly, a colorimetric biosensor based on DNA cryogel has been developed as a proof of concept for rapid detection of aflatoxin B1 (AFB1) in food samples, and an excellent analytical performance was obtained under the optimized conditions with a low detection limit (1 nM), broad detection range (5-100 nM), satisfactory accuracy and precision (recoveries, 81.2-112.6 %; CV, 2.75-5.53 %). Furthermore, by integrating with a smartphone sensing platform, a portable device was created for rapid on-site measurement of target within 45 min, which provided some insight for hydrogel biosensors design.

Multifunctional tannic acid-based nanocomposite methacrylated silk fibroin hydrogel with the ability to scavenge reactive oxygen species and reduce inflammation for bone regeneration

The microenvironment of bone defect site is vital for bone regeneration. Severe bone defect is often accompanied with severe inflammation and elevated generation of reactive oxygen species (ROS) during bone repair. In recent years, the unfriendly local microenvironment has been paid more and more attention. Some bioactive materials with the ability to regulate the microenvironment to promote bone regeneration urgently need to be developed. Here, we develop a multifunctional composite hydrogel composed of photo-responsive methacrylate silk fibroin (SFMA), laponite (LAP) nanocomposite and tannic acid (TA), aiming to endow hydrogel with antioxidant, anti-inflammatory and osteogenic induction ability. Characterization results confirmed that the SFMA-LAP@TA hydrogel could significantly improve the mechanical properties of hydrogel. The ROS-Scavenging ability of the hydrogel enabled bone marrow mesenchymal stem cells (BMSCs) to survive against H2O2-induced oxidative stress. In addition, the SFMA-LAP@TA hydrogel effectively decreased the expression of pro-inflammatory factors in RAW264.7. More importantly, the SFMA-LAP@TA hydrogel could enhance the expression of osteogenic markers of BMSCs under inflammatory condition and greatly promote new bone formation in a critical-sized cranial defect model. Above all, the multifunctional hydrogel could effectively promote bone regeneration in vitro and in vivo by scavenging ROS and reducing inflammation, providing a prospective strategy for bone regeneration.

In-Bath 3D Printing of Anisotropic Shape-Memory Cryogels Functionalized with Bone-Bioactive Nanoparticles

Cryogels exhibit unique shape memory with full recovery and structural stability features after multiple injections. These constructs also possess enhanced cell permeability and nutrient diffusion when compared to typical bulk hydrogels. Volumetric processing of cryogels functionalized with nanosized units has potential to widen their biomedical applications, however this has remained challenging and relatively underexplored. In this study, we report a novel methodology that combines suspension 3D printing with directional freezing for the fabrication of nanocomposite cryogels with configurable anisotropy. When compared to conventional bulk or freeze-dried hydrogels, nanocomposite cryogel formulations exhibit excellent shape recovery (>95%) and higher pore connectivity. Suspension printing, assisted with a prechilled metal grid, was optimized to induce anisotropy. The addition of calcium- and phosphate-doped mesoporous silica nanoparticles into the cryogel matrix enhanced bioactivity toward orthopedic applications without hindering the printing process. Notably, the nanocomposite 3D printed cryogels exhibit injectable shape memory while also featuring a lamellar topography. The fabrication of these constructs was highly reproducible and exhibited potential for a cell-delivery injectable cryogel with no cytotoxicity to human-derived adipose stem cells. Hence, in this work, it was possible to combine a gravity defying 3D printed methodology with injectable and controlled anisotropic macroporous structures containing bioactive nanoparticles. This methodology ameliorates highly tunable injectable 3D printed anisotropic nanocomposite cryogels with a user-programmable degree of structural complexity.

Biomedical applications of stimuli-responsive "smart" interpenetrating polymer network hydrogels

In recent years, owing to the ongoing advancements in polymer materials, hydrogels have found increasing applications in the biomedical domain, notably in the realm of stimuli-responsive "smart" hydrogels. Nonetheless, conventional single-network stimuli-responsive "smart" hydrogels frequently exhibit deficiencies, including low mechanical strength, limited biocompatibility, and extended response times. In response, researchers have addressed these challenges by introducing a second network to create stimuli-responsive "smart" Interpenetrating Polymer Network (IPN) hydrogels. The mechanical strength of the material can be significantly improved due to the topological entanglement and physical interactions within the interpenetrating structure. Simultaneously, combining different network structures enhances the biocompatibility and stimulus responsiveness of the gel, endowing it with unique properties such as cell adhesion, conductivity, hemostasis/antioxidation, and color-changing capabilities. This article primarily aims to elucidate the stimulus-inducing factors in stimuli-responsive "smart" IPN hydrogels, the impact of the gels on cell behaviors and their biomedical application range. Additionally, we also offer an in-depth exposition of their categorization, mechanisms, performance characteristics, and related aspects. This review furnishes a comprehensive assessment and outlook for the advancement of stimuli-responsive "smart" IPN hydrogels within the biomedical arena. We believe that, as the biomedical field increasingly demands novel materials featuring improved mechanical properties, robust biocompatibility, and heightened stimulus responsiveness, stimuli-responsive "smart" IPN hydrogels will hold substantial promise for wide-ranging applications in this domain.

Development of Essential Oil Delivery Systems by 'Click Chemistry' Methods: Possible Ways to Manage Duchenne Muscular Dystrophy

Recently, rare diseases have received attention due to the need for improvement in diagnosed patients' and their families' lives. Duchenne muscular dystrophy (DMD) is a rare, severe, progressive, muscle-wasting disease. Today, the therapeutic standard for treating DMD is corticosteroids, which cause serious adverse side effects. Nutraceuticals, e.g., herbal extracts or essential oils (EOs), are possible active substances to develop new drug delivery systems to improve DMD patients' lives. New drug delivery systems lead to new drug effects, improved safety and accuracy, and new therapies for rare diseases. Herbal extracts and EOs combined with click chemistry can lead to the development of safer treatments for DMD. In this review, we focus on the need for novel drug delivery systems using EOs as the therapy for DMD and the potential use of click chemistry for drug delivery systems. New EO complex drug delivery systems may offer a new approach for improving muscle conditions and mental health issues associated with DMD. However, further research should identify the potential of these systems in the context of DMD. In this review, we discuss possibilities for applying EOs to DMD before implementing expensive research in a theoretical way.

All-Natural, Robust, and pH-Responsive Glycyrrhizic Acid-Based Double Network Hydrogels for Controlled Nutrient Release

Supramolecular hydrogels self-assembled from naturally occurring small molecules (e.g., glycyrrhizic acid, GA) are promising materials for controlled bioactive delivery due to their facile fabrication processes, excellent biocompatibility, and versatile stimuli-responsive behaviors. However, most of these natural hydrogels suffer from poor mechanical strength and processability for practical applications. In this work, through adopting a multicomponent gel approach, we developed a novel mechanically robust GA-based hydrogel with an interpenetrating double network (DN) that is composed of a Ca2+-enhanced hydrogen-bond supramolecular GA nanofibril (GN) network and a Ca2+cross-linked natural polysaccharide sodium alginate (ALG) network. Compared to the single GN network (SN) hydrogel, the GN-ALG hybrid hydrogels (GN-ALG-DN) with the hierarchical double-network structure possess excellent mechanical properties and shaping adaptation, encouraging small and large amplitude oscillatory shear (SAOS and LAOS) rheological performances, better thermal stability, higher resistance to large compression deformations, and lower swelling behaviors. Furthermore, the GN-ALG-DN hydrogels exhibit a pH-responsive and sustained release behavior of nutrients (i.e., vitamin B12, VB12), showing a faster VB12 release rate with a higher swelling ratio in an alkaline condition (pH 7.5) than in an acidic condition (pH 2.5). This is ascribed to the fact that the higher dissociation degree of carboxylic groups in GA and ALG molecules in an alkaline environment induces the erosion and looseness of the self-assembled GN network and the ionic-cross-linked ALG network, which can lead to the decomposition of the hybrid hydrogels and thereby increases the release of nutrients. Cytotoxicity tests further demonstrate the excellent biocompatibility of the GN-ALG-DN hydrogels. This study highlights the design of robust shaped and structured supramolecular hydrogels from natural herb small molecules, which can serve as solid, edible, and stimuli-responsive active cargo delivery platforms for food, biomedical, and sustainable applications.

Nanogels as novel drug nanocarriers for CNS drug delivery

Nanogels are highly recognized as adaptable drug delivery systems that significantly contribute to improving various therapies and diagnostic examinations for different human diseases. These three-dimensional, hydrophilic cross-linked polymers have the ability to absorb large amounts of water or biological fluids. Due to the growing demand for enhancing current therapies, nanogels have emerged as the next-generation drug delivery system. They effectively address the limitations of conventional drug therapy, such as poor stability, large particle size, and low drug loading efficiency. Nanogels find extensive use in the controlled delivery of therapeutic agents, reducing adverse drug effects and enabling lower therapeutic doses while maintaining enhanced efficacy and patient compliance. They are considered an innovative drug delivery system that highlights the shortcomings of traditional methods. This article covers several topics, including the involvement of nanogels in the nanomedicine sector, their advantages and limitations, ideal properties like biocompatibility, biodegradability, drug loading capacity, particle size, permeability, non-immunological response, and colloidal stability. Additionally, it provides information on nanogel classification, synthesis, drug release mechanisms, and various biological applications. The article also discusses barriers associated with brain targeting and the progress of nanogels as nanocarriers for delivering therapeutic agents to the central nervous system.

Cryogels: Advancing Biomaterials for Transformative Biomedical Applications

Cryogels, composed of synthetic and natural materials, have emerged as versatile biomaterials with applications in tissue engineering, controlled drug delivery, regenerative medicine, and therapeutics. However, optimizing cryogel properties, such as mechanical strength and release profiles, remains challenging. To advance the field, researchers are exploring advanced manufacturing techniques, biomimetic design, and addressing long-term stability. Combination therapies and drug delivery systems using cryogels show promise. In vivo evaluation and clinical trials are crucial for safety and efficacy. Overcoming practical challenges, including scalability, structural integrity, mass transfer constraints, biocompatibility, seamless integration, and cost-effectiveness, is essential. By addressing these challenges, cryogels can transform biomedical applications with innovative biomaterials.

Photo-degradable salecan/xanthan gum ionic gel induced by iron (III) coordination for organic dye decontamination

As dye adsorbents with great potential, polysaccharide-based hydrogels are significantly hampered in practical application owing to intricate preparation methods, low absorption, and bad degradability. Salecan is a water-soluble extracellular polysaccharide with excellent physicochemical and biological properties. Here, salecan and xanthan gum were first used as a dual-precursors system, their mixed solution was crosslinked by Fe³⁺ to assemble a photo-degradable ionic gel for malachite green (MG) adsorption. Photo-degradation was done using visible light under very mild conditions, which gave rise to gel network dissolution and homogeneous solution formation. Extensive dynamic coordinate interactions between Fe³⁺ and polysaccharides maintained gel matrix stability and were systematically investigated. The control of water uptake, micro-structure, and rheology can be facilely implemented by tuning salecan/xanthan gum ratios. Furthermore, various parameters such as polysaccharide ratios, pHs, MG concentrations, and contact time affecting adsorption were optimized using batch experiments. Adsorption process accurately adhered to pseudo-second-order kinetic and Langmuir isotherm model, with the maximum adsorption capacity of 463.0 mg/g. Such mechanism implied monolayer chemisorptive characteristics. The gel exhibited satisfactory reusability and was recycled five times without apparent decrease in adsorption capacity. From these results, the photo-degradable Fe³⁺-induced salecan/xanthan gum ionic gel is an alternative and sustainable absorbent for MG removal.

Multiscale design of stiffening and ROS scavenging hydrogels for the augmentation of mandibular bone regeneration

Although biomimetic hydrogels play an essential role in guiding bone remodeling, reconstructing large bone defects is still a significant challenge since bioinspired gels often lack osteoconductive capacity, robust mechanical properties and suitable antioxidant ability for bone regeneration. To address these challenges, we first engineered molecular design of hydrogels (gelatin/polyethylene glycol diacrylate/2-(dimethylamino)ethyl methacrylate, GPEGD), where their mechanical properties were significantly enhanced via introducing trace amounts of additives (0.5 wt%). The novel hybrid hydrogels show high compressive strength (>700 kPa), stiff modulus (>170 kPa) and strong ROS-scavenging ability. Furthermore, to endow the GPEGD hydrogels excellent osteoinductions, novel biocompatible, antioxidant and BMP-2 loaded polydopamine/heparin nanoparticles (BPDAH) were developed for functionalization of the GPEGD gels (BPDAH-GPEGD). In vitro results indicate that the antioxidant BPDAH-GPEGD is able to deplete elevated ROS levels to protect cells viability against ROS damage. More importantly, the BPDAH-GPEGD hydrogels have good biocompatibility and promote the osteo differentiation of preosteoblasts and bone regenerations. At 4 and 8 weeks after implantation of the hydrogels in a mandibular bone defect, Micro-computed tomography and histology results show greater bone volume and enhancements in the quality and rate of bone regeneration in the BPDAH-GPEGD hydrogels. Thus, the multiscale design of stiffening and ROS scavenging hydrogels could serve as a promising material for bone regeneration applications.

•

Trace additives of DMAEMA markedly enhanced the mechanical performances of the gelatin-based hydrogels through molecular induced multiple crosslinking structures.

•

Molecular design strategy combined with bioactive nanocomposites have a synergistically effects on promoting ROS scavenging ability and osteoactivity of the biomimetic hydrogels.

Strychnos Potatorum L. Seed Polysaccharide-Based Stimuli-Responsive Hydrogels and Their Silver Nanocomposites for the Controlled Release of Chemotherapeutics and Antimicrobial Applications

Natural Strychnos potatorum L. (SPL) polysaccharide-based dual-responsive semi-IPN-type (SPL-DMA) hydrogels have been fabricated using dimethylaminoethyl methacrylate by simple free radical polymerization. Furthermore, a facial and eco-friendly method has been developed for the green synthesis of silver nanoparticles on SPL-DMA hydrogel templates (SPL-DMA-Ag) using an aqueous leaf extract of Carissa spinarum (as a bioreducing agent). SPL-DMA and SPL-DMA-Ag were characterized using Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), thermogravimetry analysis (TGA), differential scanning calorimetry (DSC), scanning electron microscopy (SEM), transmission electron microscopy (TEM), dynamic light scattering (DLS), and evaluated network parameters. 5-Fluorouracil and doxorubicin were successfully encapsulated, and in vitro drug release studies were performed at pH values of 1.2 and 7.4 and at 25 and 37 °C. To understand the drug release mechanism of SPL-DMA hydrogels, various kinetic parameters were calculated. Biocompatibility and anticancer activities of SPL-DMA hydrogels were proved by an antioxidant activity study and in vitro cell viability studies against HeLa and 3T3-L1 cell lines. SPL-DMA-Ag hydrogels were used for antibacterial application.

Superfast-Expanding Porous Hydrogels: Pushing New Frontiers in Converting Chemical Potential into Useful Mechanical Work

Superabsorbent polymer gels can absorb large amounts of water (100-1000× their dry weight). For the past 50 years, many scientists such as de Gennes have proposed to extract mechanical work from gel expansion/contraction, which could pave the way for "artificial muscles". However, slow rates of gel expansion have limited these efforts: macroscale (∼cm) gels take over 24 h to expand to their equilibrium size. Gels can be made to expand faster if their characteristic length scale is reduced, e.g., by making a macroscopic gel porous. Still, gels that are both superabsorbent and able to expand rapidly have not yet been realized. Here, we create gels at the macroscale (∼cm or larger) that are porous, highly robust, superabsorbent and expand much faster than any gels thus far. Our approach involves the in situ foaming of a monomer solution (acrylic acid and acrylamide) using a double-barreled syringe that has acid and base in its two barrels. Gas (CO₂) is generated at the mixing tip of the syringe by the acid-base reaction, and gas bubbles are stabilized by an amphiphilic polymer in one of the barrels. The monomers are then polymerized by ultraviolet (UV) light to form the gel around the bubbles, and the material is dried under ambient conditions to give a porous solid. When this dry gel is added to water, it absorbs water at a rate of 20 g/g·s until an equilibrium is achieved at ∼300× its weight. In the process, each gel dimension increases by ∼20%/s until its final dimensions are more than 3× larger. Such rapid and appreciable expansion can be easily observed by the eye, and remarkably, the swollen gel is robust enough to be picked up by hand. SEM images reveal a porosity of >90% and an interconnected network of pores. The gels are responsive to pH, and a full cycle of expansion (in regular water) and contraction (at pH 10 or in ethanol) can be completed within about 60 s. We use gel expansion to rapidly lift weights against gravity, resulting in ∼0.4 mJ of work being done over 40 s, which translates to a power density of 260 mW/kg. This ability to harness the chemical potential energy from the gel to do useful mechanical work could enable new designs for mechano-chemical engines─and potentially for artificial muscles.

pH-Responsive Semi-Interpenetrated Polymer Networks of pHEMA/PAA for the Capture of Copper Ions and Corrosion Removal

Bronze artifacts constitute a fundamental portion of Cultural Heritage, but effective methodologies for the removal of corrosion layers, such as those produced by the "bronze disease", are currently missing. We propose the formulation and application of novel poly(2-hydroxyethyl methacrylate) (pHEMA) networks semi-interpenetrated (SIPN) with poly(acrylic acid) (PAA) to achieve enhanced capture of copper ions and removal of corrosion products. The pHEMA/PAA SIPNs were designed to improve previous pHEMA/poly(vinylpyrrolidone) (PVP) networks, taking advantage of the chelating ability of pH-responsive carboxylic groups in PAA. Increasing the pH ionizes carboxyls, increases the porosity in pHEMA/PAA, and leads to the co-presence of enol and enolate forms of vinylpyrrolidone (VP), changing the macroporosity and decreasing the mesh size in pHEMA/PVP. The ion-matrix interaction is stronger in pHEMA/PAA, where the process occurs through an initial diffusion-limited step followed by diffusion in smaller pores or adsorption by less available sites. In pHEMA/PVP, the uptake is probably controlled by adsorption as expected, considering the porogen role of PVP in the network. Upon application of the SIPNs loaded with tetraethylenpentamine (TEPA) onto corroded bronze, copper oxychlorides dissolve and migrate inside the gels, where Cu(II) ions form ternary complexes with TEPA and carboxylates in PAA or carbonyls in PVP. The removal of oxychlorides is more effective and faster for pHEMA/PAA than its /PVP counterpart. The selective action of the gels preserved the cuprite layers that are needed to passivate bronze against corrosion, and the pH-responsive behavior of pHEMA/PAA allows full control of the uptake and release of the Cu(II)-TEPA complex, making these systems appealing in several fields even beyond Cultural Heritage conservation (e.g., drug delivery, wastewater treatment, agricultural industry, and food chemistry).

Preparation and Characterization of Semi-IPN Cryogels Based on Polyacrylamide and Poly(N,N-dimethylaminoethyl methacrylate); Functionalization of Carrier with Monochlorotriazinyl-β-cyclodextrin and Release Kinetics of Curcumin

Curcumin (CCM) is a natural hydrophobic polyphenol known for its numerous applications in the food industry as a colorant or jelly stabilizer, and in the pharmaceutical industry due to its anti-inflammatory, antibacterial, antioxidant, anti-cancer, and anti-Alzheimer properties. However, the large application of CCM is limited by its poor solubility in water and low stability. To enhance the bioavailability of CCM, and to protect it against the external degradation agents, a novel strategy, which consists in the preparation of semi-interpenetrating polymer networks, (s-IPNs) based on poly(N,N-dimethylaminoethyl methacrylate) entrapped in poly(acrylamide) networks, by a cryogelation technique, was developed in this work. All s-IPN cryogels were characterized by SEM, EDX, FTIR, and swelling at equilibrium as a function of pH. Functionalization of semi-IPN cryogel with monochlorotriazinyl-β-cyclodextrin (MCT-β-CD) led to IPN cryogel. The release profile of CCM from the composite cryogels was investigated at 37 °C, in pH 3. It was found that the cumulative release increased with the increase of the carrier hydrophobicity, as a result of increasing the cross-linking degree, the content and the molar mass of PDMAEMA. Fitting Higuchi, Korsmeyer–Peppas, and first order kinetic models on the CCM release profiles indicated the diffusion as the main driving force of drug release from the composite cryogels.

Simple ultrasonic-assisted approach to prepare polysaccharide-based aerogel for cell research and histocompatibility study

Salecan, a water-soluble microbial polysaccharide with attractive biocompatible characteristics, is very suitable for aerogel fabrication. However, the practical application of salecan-based aerogels for cell culture was limited by complicated preparation method, lack of cell anchorage signals, and the ability to modulate this properly. Here, a smart aerogel was designed by ultrasonic-assisted self-assembly of salecan and cationic starch (CAS) without any organic and toxic crosslinkers. The ultrasound waves generated a marked impact on self-assemble process by means of ultrasonic cavitation. Aerogel network was produced by strong electrostatic attractions between the polysaccharides. Especially, salecan/CAS ratio can be precisely modulated to tailor the hydrophilicity, mechanical stiffness, and morphologic property. The specific surface area of the aerogels gradually increased with the increase in salecan/CAS ratio. These aerogels were non-cytotoxic, and the incorporation of salecan into them promoted cell-matrix interactions by directionally supporting cell adhesion and proliferation. Most strikingly, in vivo experiment revealed that the histological features in the main organs of the mice were similar to those observed in the PBS-treated control group, and no sign of the histopathological abnormality or tissue destruction was observed, indicating the excellent histocompatibility of the aerogels. This study offered a new and powerful avenue to fabricate functional biomaterial.

Dual Temperature and Metal Salts-Responsive Interpenetrating Polymer Networks Composed of Poly (N-isopropylacrylamide) and Polyethylene Glycol

Novel interpenetrating polymer networks (IPNs) composed of poly(N-isopropylacrylamide) (poly-NIPAM) and polyethers—namely, polyethylene glycol (PEG) and poly(tetramethylene oxide)—were synthesized in the absence and presence of polysiloxane containing a silanol residue. Gelation was accomplished using end-capped polyethers with trimethoxysilyl moieties and proceeded through simultaneous radical gelation of NIPAM and condensation of the silyl groups to form siloxane linkages. Thus, a novel one-step method constructing an IPN structure was provided. The obtained IPNs showed a gentle temperature-responsive volume change in water owing to the constructed poly-NIPAM gel component. In addition, a specific color-change response to chemical stimuli, such as CuCl₂ and AgNO₃ in water, was observed only when both components of poly-NIPAM and PEG existed in a gel form. For example, a single network gel composed of poly-NIPAM or PEG was isolated as a pale blue hydrogel, whereas IPNs composed of poly-NIPAM and PEG components turned yellow after swelling in an aqueous CuCl₂ solution (0.1 M, pale blue). Dual-responsive functionalities of the synthesized hydrogels to temperature and metal salts, along with volume and color changes, were demonstrated.

Recent Developments in Ion-Sensitive Systems for Pharmaceutical Applications

Stimuli-responsive carriers of pharmaceutical agents have been extensively researched in recent decades due to the possibility of distinctively precise targeted drug delivery. One of the potentially beneficial strategies is based on the response of the medical device to changes in the ionic environment. Fluctuations in ionic strength and ionic composition associated with pathological processes may provide triggers sufficient to induce an advantageous carrier response. This review is focused on recent developments and novel strategies in the design of ion-responsive drug delivery systems. A variety of structures i.e., polymeric matrices, lipid carriers, nucleoside constructs, and metal-organic frameworks, were included in the scope of the summary. Recently proposed strategies aim to induce different pharmaceutically beneficial effects: localized drug release in the desired manner, mucoadhesive properties, increased residence time, or diagnostic signal emission. The current state of development of ion-sensitive drug delivery systems enabled the marketing of some responsive topical formulations. Concurrently, ongoing research is focused on more selective and complex systems for different administration routes. The potential benefits in therapeutic efficacy and safety associated with the employment of multi-responsive systems will prospectively result in further research and applicable solutions.

A polymer hybrid film based on poly(vinyl cinnamate) and poly(2-hydroxy ethyl methacrylate) for controlled flurbiprofen release

A crosslinked polymer hybrid film, ipn-poly(vinyl cinnamate-graft-2-hydroxy ethyl methacrylate)-v-poly(ethylene glycol dimethacrylate) was synthesized by UV initiation using poly(vinyl cinnamate) (polyVCi), 2-hydroxy ethyl methacrylate (HEMA) monomer and ethylene glycol dimethacrylate (EGDMA) crosslinker. Benzophenone (Ph₂CO), was used as the photoinitiator. The synthesis was optimized by changing the concentration of HEMA, Ph₂CO, EGDMA, and UV irradiation time. PolyVCi undergoes photocrosslinking by 2 + 2 photocylo addition while the monomer/crosslinker couple, HEMA/EGDMA, undergoes free radical polymerization and crosslinking to form EGDMA crosslinked polyHEMA. Hence, simultaneous interpenetrating polymer network (IPN) formation occurs. The IPN consists of dual network of photocrosslinked polyVCi and EGDMA crosslinked polyHEMA chains. Grafting of HEMA/EGDMA chains on the polyVCi backbone also occur during network formation. The chemical functionalities present in the polyVCi/polyHEMA/polyEGDMA IPN films obtained were characterized by FTIR and SEM analysis. The contact angle measurements show enhanced wettability of the IPN film compared to polyVCi surface. TGA analysis confirms thermal stability of the films. Swelling behavior of the films examined in water and in ethanol reveals the effects of the chemical natures of polyVCi and polyHEMA as well as that of crosslinking on the hydrophilicity of the film. The films were tested as drug release matrices using flurbiprofen. The drug was loaded into the film matrix during IPN formation under UV irradiation. PolyVCi/polyHEMA/polyEGDMA IPN proved to be a suitable release matrix for flurbiprofen demonstrating controlled release behavior and zero-order release kinetics. The release mechanism was confirmed by its Ritger-Peppas “n” value (1.00 to 1.42), which indicates super case II release.

Charge-balanced terpolymer poly(diethylaminoethyl methacrylate-hydroxyethyl methacrylate-2-acrylamido-2-methyl-propanesulfonic acid) hydrogels and cryogels: scaling parameters and correlation with composition

The scaling laws relating the preparation conditions to the swelling degree, reduced modulus and effective crosslinking density of poly(diethylaminoethyl methacrylate-co-hydroxyethyl methacrylate-co-2-acrylamido-2-methyl-propanesulfonic acid), henceforth designated as PDHA, gels prepared by radical crosslinking copolymerization in a solvent mixture were reported. Charge-balanced terpolymer PDHA hydrogels and cryogels (PDHA-Hgs and Cgs) were prepared in different monomer feed compositions. The swelling dependence of the reduced modulus was described by a power law relationship G_r≈ (φ_V)^m with an exponent of m = -0.30 at low swelling degree, while in the high swelling region the scaling becomes 0.21, indicating the finite extensibility of the network chains. The scaling exponent for the swelling degree and terpolymer composition, φ_V≈ (Nν)^m, was found to be -0.13, indicating the increasing extent of the topological constraints arising from the trapped entanglements. By combining elasticity and swelling results, the scaling relationship between the apparent crosslink density and HEMA content used in the terpolymer feed was obtained as a cubic polynomial of the mol% of HEMA. In the HEMA-rich terpolymer PDHA Hgs and Cgs, the swelling degree was possibly controlled by the HEMA part of the terpolymer network, while the presence of DEAEM units in the network triggered the thermoresponsive swelling behavior. The dependence of interaction parameter χ on the volume fraction of the crosslinked terpolymer network in the swollen gel ν₂ was evaluated and the results revealed extremely strong concentration dependence of χ for all terpolymer samples. Because of their inherent properties, the resulting terpolymer gels might contribute to the improvement of the loading capacity of polymers used in anticancer drug delivery systems.

A theoretical mathematical model for assessing diclofenac release from chitosan-based formulations

The paper reports a new mathematical model for understanding the mechanism delivery from drug release systems. To do this, two drug release systems based on chitosan and diclofenac sodium salt as a drug model, were prepared by in situ hydrogelation in the presence of salicylaldehyde. The morphology of the systems was analyzed by scanning electron microscopy and polarized light microscopy and the drug release was in vitro investigated into a medium mimicking the in vivo environment. The drug release mechanism was firstly assessed by fitting the in vitro release data on five traditional mathematical model. In the context of pharmacokinetics behavioral analysis, a new mathematical procedure for describing drug release dynamics in polymer-drug complex systems was proposed. Assuming that the dynamics of polymer-drug system's structural units take place on continuous and nondifferentiable curves (multifractal curves), it was showed that in a one-dimensional hydrodynamic formalism of multifractal variables the drug release mechanism is given through synchronous dynamics at a differentiable and non-differentiable scale resolutions.

Multi-Responsive Polysiloxane/Poly(N-isopropylacrylamide) Interpenetrating Networks Containing Urea and Thiourea Groups

Novel interpenetrating polymer networks (IPNs) were synthesized from N-isopropylacrylamide (NIPAM) and polysiloxanes containing a urea or thiourea side group, in addition to the silanol residue, through two reactions, such as the radical gelation of NIPAM and the condensation of silanols to form a siloxane linkage. The obtained IPNs showed a typical temperature-responsive volume change in water based on the constructed poly-NIPAM gel component. In addition, the characteristic color and volume changes responding to chemical stimuli, such as acetate and/or fluoride ions, based on the introduced urea and thiourea groups onto the polysiloxane gel were observed in N,N-dimethylformamide.

Two-Step Freezing Polymerization Method for Efficient Synthesis of High-Performance Stimuli-Responsive Hydrogels

The widespread use of stimuli-responsive hydrogels is closely related to their synthesis efficiency. However, the widely used thermal-responsive poly(N-isopropylacrylamide) (PNIPAM) hydrogels usually require a time-consuming synthesis process to produce (more than 12 h) and exhibit a relatively slow response speed in the field of cryo-polymerization. In this study, a sequence of thawing polymerization after freezing polymerization by a two-step method of free radical polymerization for the efficient synthesis of PNIPAM hydrogels (merely 2 h) with an excellent comprehensive performance is demonstrated. Results show that the overall performance of the as-synthesized PNIPAM hydrogels is at the top level among reported works despite the significantly reduced preparation time. Moreover, after incorporating multi-walled carbon nanotubes (MWNTs), the PNIPAM hydrogels exhibit a rapid near-infrared (NIR) light-response and programmable shape-morphing capability. It is believed that such a viable and time-saving synthetic method for producing PNIPAM hydrogels of high performance will lay a solid foundation for drug delivery and smart actuators.

Macroporous Hydrogel Scaffolds with Tunable Physicochemical Properties for Tissue Engineering Constructed Using Renewable Polysaccharides

Polysaccharides have recently attracted increasing attention in the construction of hydrogel devices for biomedical applications. However, polysaccharide-based hydrogels are not suitable for most preclinical applications because of their limited mechanical properties and poor tunability. In this study, we employed a simple and eco-friendly approach to producing a macroporous polysaccharide hydrogel composed of salecan and κ-carrageenan without the use of toxic chemicals. We evaluated the physicochemical properties of the obtained salecan/κ-carrageenan hydrogel and found that its viscoelasticity, morphology, swelling, and thermal stability could be simply controlled by changing the polysaccharide dose in the pre-gel solution. The co-incubation of the fabricated hydrogel with mouse fibroblast cells demonstrated that the hydrogel can support cell adhesion, migration, and growth. Moreover, the hydrogel exhibited good biocompatibility in vivo. Overall, the findings provide a new strategy for the fabrication and optimization of polysaccharide-based hydrogel scaffolds for application in tissue engineering.

Resveratrol-loaded peptide-hydrogels inhibit scar formation in wound healing through suppressing inflammation

Scar formation seriously affects the repair of damaged skin especially in adults and the excessive inflammation has been considered as the reason. The self-assembled peptide-hydrogels are ideal biomaterials for skin wound healing due to their similar nanostructure to natural extracellular matrix, hydration environment and serving as drug delivery systems. In our study, resveratrol, a polyphenol compound with anti-inflammatory effect, is loaded into peptide-hydrogel (Fmoc-FFGGRGD) to form a wound dressing (Pep/RES). Resveratrol is slowly released from the hydrogel in situ, and the release amount is controlled by the loading amount. The in vitro cell experiments demonstrate that the Pep/RES has no cytotoxicity and can inhibit the production of pro-inflammatory cytokines of macrophages. The Pep/RES hydrogels are used as wound dressings in rat skin damage model. The results suggest that the Pep/RES dressing can accelerate wound healing rate, exhibit well-organized collagen deposition, reduce inflammation and eventually prevent scar formation. The Pep/RES hydrogels supply a potential product to develop new skin wound dressings for the therapy of skin damage.

Tough hydrogel module towards an implantable remote and controlled release device

On-demand controllable drug delivery systems enable the administration of precise dosages and thus have the potential to improve overall healthcare.

Highly efficient dye decontamination via microbial salecan polysaccharide-based gels

Wastewater treatment materials that combine high decontamination performance, ease of use and economic production are highly desirable for practical applications. Herein, we fabricated a low-cost and recyclable bio-adsorbent based on a microbial polysaccharide (salecan) for efficient removal of methyl violet (MV) from wastewater. The success fabrication and the properties (such as thermal stability, microarchitecture, mechanical strength and water uptake) of the adsorbent had been investigated, and the hydrogels were found to have tunable properties by simple adjusting the salecan dose in hydrogel composition. Adsorption data displayed that the adsorption of MV followed the pseudo second-order kinetic model (R² = 0.99015) and Freundlich isotherm model (R² = 0.99221) with a maximum adsorption capacity of 178.9 mg/g. Moreover, salecan-based hydrogels showed a good reversibility in adsorption-desorption cycles. These features indicate that salecan-based bio-adsorbent may be a promising device for dye removal from dyeing waste water.