Heating Rate Sensitive Multi-Shape Memory Polypropylene: A Predictive Material

Heating Rate Sensitive Polyethylene Terephthalate

Smart materials react to external triggers by changing size, color, mechanical properties, or permeability. The next generation of smart materials will be able to not only recognize and react to external triggers but also to their dynamics. The only existing example of such a material is heating rate-sensitive polymorphous cross-linked syndiotactic polypropylene. This study presents a new principle of a heating rate-sensitive material on the example of cross-linked and fully amorphous quenchable semi-crystalline polyethylene terephthalate (x-PET). The x-PET is stretched to high elongation above its melting temperature and constrained quenched to a fully amorphous state. Then the polymer is heated to 120-170 °C with different heating rates. Due to its heating-rate sensitivity, x-PET shrinks to different stabilized lengths dependent on the heating rate. The new length can be used to read out the heating rate and to specifically answer to this by mechanically switching a process. Detailed analytics of this process reveal that amorphous stretched x-PET is starting the retraction above Tg and simultaneously stopping it by crystallization. The different rates of these processes result in the heating rate sensitivity of x-PET.

Covalent Adaptable Network of Semicrystalline Polyolefin Blend with Triple-Shape Memory Effect

A covalent adaptable network (CAN) of semicrystalline polyolefin blends with triple-shape memory effects was fabricated by the reactive melt blending of maleated polypropylene (mPP) and maleated polyolefin elastomer (mPOE) (50 wt/50 wt) in the presence of a small amount of a tetrafunctional thiol (PETMP) and 1,5,7-triazabicyclo [4,4,0]dec-5-ene (TBD). The polymer blend formed a chemically crosslinked network via the reaction between the thiol group of PETMP and maleic anhydride of both polymers in the blend, which was confirmed by FTIR, the variation of torque during the melt mixing process, a solubility test, and DMA. DSC analysis revealed that the crosslinked polyolefin blends show two distinct crystalline melting transitions corresponding to each component polymer. Improved tensile strength as well as elongation at break were observed in the crosslinked blend as compared to the simple blend, and the mechanical properties were maintained after repeated melt processing. These results suggest that thermoplastic polyolefin blends can be transformed into a high-performance and value-added material with good recyclability and reprocessability.

Electrospun Fibrous Membrane with Confined Chain Configuration: Dynamic Relaxation and Glass Transition

Thermodynamic glass transition processes of electrospun membranes were first introduced to study their dynamic relaxation nature, which is not constantly in equilibrium. The relaxation modes of electrospun membranes are slow but measurable near and above the Tg, given the stretched chain over long distances. Based on differential scanning calorimetry (DSC) experiments and the general principle of mode-coupling theory (MCT), endothermic peak temperature and relaxation enthalpy were used to analyze the relaxation process by capturing these instantaneous “arrested” structures. The short- and long-wavelength relaxation modes could be identified with different annealing times and temperatures relative to DSC-measured Tg for electrospun membranes with different molecular weights. Results clearly showed the dynamic nature of a glass transition in polymeric materials. Tp and enthalpy loss initially increased and then directly decreased with the increase in annealing time. When Ta > Tg, regardless of the size of the molecular weight, the Tp and enthalpy loss of the PLGA fibers would directly decrease, and the curves would shift toward the melted one. Combination of electrospinningand normal DSC instrument can be used to investigating the dynamic relax process through an adequately designed kinetic scanning procedure. This result can be explained by the general principle of MCT-type dynamic theory.

Melting at Mg/Al interface in Mg-Al-Mg nanolayer by molecular dynamics simulations

The melting at the magnesium/aluminum (Mg/Al) interface is an essential step during the fabrications of Mg-Al structural materials and biomaterials. We carried out molecular dynamics simulations on the melting at the Mg/Al interface in a Mg-Al-Mg nanolayer via analyzing the changes of average atomic potential energy, Lindemann index, heat capacity, atomic density distribution and radial distribution function with temperature. The melting temperatures (Tm) of the nanolayer and the slabs near the interface are significantly sensitive to the heating rate (vh) over the range ofvh ≤ 4.0 K ps^-1. The distance (d) range in which the interface affects the melting of the slabs is predicted to be (-98.2, 89.9) Å atvh→0,if the interface is put atd = 0 and Mg (Al) is located at the left (right) side of the interface. TheTmof the Mg (Al) slab just near the interface (e.g.d=4.0Å) is predicted to be 926.8 K (926.6 K) atvh→0,with 36.9 K (37.1 K) below 963.7 K for the nanolayer. These results highlight the importance of regional research on the melting at an interface in the nanolayers consisting of two different metals.

Reconfigurable Photonic Crystals Enabled by Multistimuli-Responsive Shape Memory Polymers Possessing Room Temperature Shape Processability

Traditional shape memory polymers (SMPs) are mostly thermoresponsive, and their applications in nano-optics are hindered by heat-demanding programming and recovery processes. By integrating a polyurethane-based shape memory copolymer with templating nanofabrication, reconfigurable/rewritable macroporous photonic crystals have been demonstrated. This SMP coupled with the unique macroporous structure enables unusual all-room-temperature shape memory cycles. "Cold" programming involving microscopic order-disorder transitions of the templated macropores is achieved by mechanically deforming the macroporous SMP membranes. The rapid recovery of the permanent, highly ordered photonic crystal structure from the temporary, disordered configuration can be triggered by multiple stimuli including a large variety of vapors and solvents, heat, and microwave radiation. Importantly, the striking chromogenic effects associated with these athermal and thermal processes render a sensitive and noninvasive optical methodology for quantitatively characterizing the intriguing nanoscopic shape memory effects. Some critical parameters/mechanisms that could significantly affect the final performance of SMP-based reconfigurable photonic crystals including strain recovery ratio, dynamics and reversibility of shape recovery, as well as capillary condensation of vapors in macropores, which play a crucial role in vapor-triggered recovery, can be evaluated using this new optical technology.