Local Fine Structural Insight into Mechanism of Electrochemical Passivation of Titanium

Ultra-Stable Ti Vacancies-Pt Atomic Clusters Structure on Titanium Oxycarbide Supports for High Current Density Hydrogen Evolution Reaction

Electrocatalysts with low Pt loading mass to achieve high current density (≥1 A cm-2) for hydrogen evolution reaction (HER) are still extremely challenging due to the limited intrinsic activity and weak stability of catalytic sites. The modulation of the electronic microenvironment of the support-Pt structure is crucial to enhance the intrinsic activity and stability of catalytic sites. Herein, an innovative titanium oxycarbide (TiVCO) solid solution with Ti vacancies (TiV) is proposed as support to anchor sub-nanoscale Pt atomic clusters (Pt ACs) and a stable "TiV-Pt ACs" structure is carefully designed. The electronic microenvironment of "TiV-Pt ACs" is indirectly optimized by an unsaturated C/O site near TiV. Thanks to this, novel "TiV-Pt ACs" structure (Pt@TiVCO) with low Pt loading mass (2.44 wt.%) exhibits excellent HER activity in acidic solution and the mass activity is more than ten times that of commercial 20% Pt/C at the overpotentials of 50 and 100 mV. Particularly, Pt@TiVCO shows amazing stability at high and fluctuating current density of 1-2 A cm-2 for 120 h. This work provides a novel and promising method to develop stable and low-loading Pt-based catalysts adapting to high current density.

Targeting Biomechanical Endurance of Dental-Implant Abutments Using a Diamond-Like Carbon Coating

Abutment components (i.e., fixtures associated with oral implants) are essentially made of titanium (Ti), which is continuously exposed to the hash oral environment, resulting in scratching. Thus, such components need to be protected, and surface treatments are viable methods for overcoming long-term damage. Diamond-like carbon (DLC), an excellent protective material, is an alternative surface-treatment material for Ti abutments. Here, we demonstrate that a silicon interlayer for DLC film growth and the pulsed-direct current plasma-enhanced chemical vapor deposition (DC-PECVD) method enables the deposition of an enhanced protective DLC film. As a result, the DLC film demonstrated a smooth topography with a compact surface. Furthermore, the DLC film enhanced the mechanical (load-displacement, hardness, and elastic modulus) and tribological properties of Ti as well as increased its corrosion resistance (16-fold), which surpassed that of a bare Ti substrate. The biofilm formed (Streptococcus sanguinis) after 24 h exhibited an equal bacterial load (∼7 Log colony-forming units) for both the groups (Ti and DLC). In addition, the DLC film exhibited good cytocompatibility, owing to its noncytotoxicity toward human gingival fibroblast cells. Therefore, DLC deposition via DC-PECVD can be considered to be a promising protective and cytocompatible alternative for developing implant abutments with enhanced mechanical, tribological, and electrochemical properties.

Lithium-Modified TiO2 Surface by Anodization for Enhanced Protein Adsorption and Cell Adhesion

Promoting osseointegration is an essential step in improving implant success rates. Lithium has gradually gained popularity for promoting alkaline phosphatase activity and osteogenic gene expression in osteoblasts. The incorporation of lithium into a titanium surface has been reported to change its surface charge, thereby enhancing its biocompatibility. In this study, we applied anodization as a novel approach to immobilizing Li on a titanium surface and evaluated the changes in its surface characteristics. The objective of this study was to determine the effect of Li treatment of titanium on typical proteins, such as albumin, laminin, and fibronectin, in terms of their adsorption level as well as on the attachment of osteoblast cells. Titanium disks were acid-etched by 66 wt % H2SO4 at 120 °C for 90 s and set as the control group. The etched samples were placed in contact with an anode, while a platinum bar served as the counter electrode. Both electrodes were mounted on a custom electrochemical cell filled with 1 M LiCl. The samples were anodized at constant voltages of 1, 3, and 9 V. Scanning electron microscopy (SEM) and confocal laser scanning microscopy (CLSM) results showed no significant differences in the topography. However, the ζ potentials of the 3 V group were higher than those of the control group at a physiological pH of 7.4. Interestingly, the adsorption level of the extracellular matrix protein was mostly enhanced on the 3 V-anodized surface. The number of attached cells on the Li-anodized surfaces increased. The localization of vinculin at the tips of the stretching cytoplasmic projections was observed more frequently in the osteoblasts on the 3 V-anodized surface. Although the optimal concentration or voltage for Li application should be investigated further, this study suggests that anodization could be an effective method to immobilize lithium ions on a titanium surface and that modifying the surface charge characteristics enables a direct protein-to-material interaction with enhanced biological adhesion.

Molecular Insights into the Stability of Titanium in Electrolytes Containing Chlorine and Fluorine Ions

Titanium and its alloys are protected by a compact and stable passive film, which confers resistance to corrosion by the primary halogen chloride (Cl-) while being less effective against fluoride (F-). Although researchers have recognized different macroscopic corrosion effects of these halide ions on titanium, the underlying mechanisms remain largely unexplored. In this work, the bonding of Cl-/F- with stable passive films was studied in neutral and acidic (pH = 2.3) conditions. The synergistic effect between the interfacial hydrogen bond (HB) structure and halogens on titanium corrosion was first revealed using first-principles calculation and Raman spectroscopy. F- forms more stable halogen-Ti bonds than Cl-, resulting in titanium degradation. The proton combined with F- exhibits a specific synergistic effect, causing corrosion of the passive film. The water hydrogen bond transformation index (HBTI) at the titanium/aqueous interface was 1.88 in an acidic solution containing F-, significantly higher than that in neutral/acid solutions containing Cl- (1.80/1.81) and a neutral solution containing F- (1.81). This work clarifies the structure-activity relationship between HBTI and the destruction of titanium passive films. We propose that the microstructure of the interfacial HB is an undeniable factor in the corrosion of titanium.

Influence of Ru on structure and corrosion behavior of passive film on Ti-6Al-4V alloy in oil and gas exploration conditions

In order to investigate the influence of minor Ru on the electrochemical behaviour and structural characteristics of passive films on the surface of Ti-6Al-4V alloys under various oil and gas exploration conditions, electrochemical techniques, X-ray photoelectron spectroscopy (XPS), scanning electron microscope (SEM) and corrosion simulation tests were carried out. The results revealed that the oil and gas exploration conditions had a serious impact on the electrochemical behaviour and corrosion resistance of the tested alloys. The passivation film resistance and corrosion potential of the tested titanium alloys were significantly reduced with increasing acidity and temperature. With the addition of minor ruthenium, the potential of the passive film on the Ti-6Al-4V-0.11Ru alloy surface increased because of the high surface potential of the ruthenium element. The contents of metallic ruthenium and tetravalent titanium oxide TiO₂ in the surface film of the Ti-6Al-4V-0.11Ru alloy both increased with increasing temperature, which led to increase the thickness, stability, corrosion resistance and repairability of the passive film on the surface of the Ti-6Al-4V-0.11Ru alloy being better than those qualities of Ti-6Al-4V. These results were also confirmed by corrosion simulation tests.

Biocompatibility of titanium from the viewpoint of its surface

Among metals, Ti and majority of its alloys exhibit excellent biocompatibility or tissue compatibility. Although their high corrosion resistance is a factor in the biocompatibility of Ti and Ti alloys, it is clear that other factors exist. In this review, the corrosion resistance and passive film of Ti are compared to those of other metallic biomaterials, and their band gap energies, E_gs, are compared to discuss the role of E_g in the reactivity with living tissues. From the perspective of the material's surface, it is possible to explain the excellent biocompatibility of Ti by considering the following factors: Ti ions are immediately stabilized not to show toxicity if it is released to body fluids; good balance of positive and negative charges by the dissociation of surface hydroxyl groups on the passive film; low electrostatic force of the passive film inducing a natural adsorption of proteins maintaining their natural conformation; strong property as n-type semiconductor; lower band gap energy of the passive film on Ti generating optimal reactivity; and calcium phosphate formation is caused by this reactivity. The results suggest that due to the passive oxide film, the optimal balance between high corrosion resistance and appropriate reactivity of Ti is the predominate solution for the excellent biocompatibility of Ti.

Band structures of passive films on titanium in simulated bioliquids determined by photoelectrochemical response: principle governing the biocompatibility

The band structures and band gap energies, E _g, of passive films formed on titanium (Ti) in simulated bioliquids, Hanks' solution (Hanks) and saline, were evaluated. Ti was polarized at 0, -0.1, and -0.2 V_Ag/AgCl, E _f, for 1 h. After polarization, the surfaces were characterized using X-ray photoelectron spectroscopy, and the photoelectrochemical responses were evaluated. The current change during photoirradiation was recorded as a photocurrent transient at each measuring potential, E _m, and by changing the wavelength of the incident light. Passive films consisted of a very thin TiO₂ layer containing small amounts of Ti₂O₃ and TiO, hydroxyl groups, and water. During polarization in Hanks, calcium and phosphate ions were incorporated or formed calcium phosphate but not in saline. Calcium phosphate and hydroxyl groups influenced the band structure. E _g was graded in Hanks but constant in saline, independent of E _f and E _m. The passive film on Ti behaved as an n-type semiconductor containing two layers: an inner oxide layer with a large E _g and an outer hydroxide layer with a small E _g. In Hanks, E _g was 3.3-3.4 eV in the inner oxide layer and 2.9 eV in the outer hydroxide layer. In saline, E _g was 3.3 eV in the inner layer and 2.7 eV in the outer layer. Calcium phosphate and hydroxyl groups influenced the band structure of the passive film. The E _g of the outermost surface was smaller than that of TiO₂ ceramics, which is probably one of the principles of the excellent biocompatibility of Ti among metals.

Titanium nanosheet as robust and biosafe drug carrier for combined photochemo cancer therapy

Two-dimensional (2D) Titanium nanosheets (Ti NSs) have shown many excellent properties, such as nontoxicity, satisfactory photothermal conversion efficacy, etc. However, the biomedical applications of Ti NSs have not been intensively investigated. Herein, we synthesized a multifunctional Ti NS drug delivery system modified with polydopamine/polyethylene glycol (Ti@PDA-PEG) and applied simultaneously for photothermal therapy and chemotherapy. Doxorubicin (DOX) was utilized as a model drug. Ti@PDA-PEG NS shows an ultrahigh antitumor drug DOX loading (Ti@PDA-PEG-DOX). The prepared Ti@PDA-PEG-DOX NS as robust drug delivery system demonstrates great stability and excellent multi-response drug-release capabilities, including pH-responsive and near-infrared -responsive behavior and obviously high photothermal efficiency. Both in vitro and in vivo experimental results have shown high biosafety and outstanding antitumor effects. Therefore, this work exhibits the enormous potential of a multifunctional platform in the treatment of tumors and may stimulate interest in the exploration of other new 2D nanomaterials for biomedical applications.

From Patient to Procedure: The Process of Creating a Custom 3D-Printed Medical Device for Foot and Ankle Pathology

Three-dimensional (3D) printing technology has advanced greatly over the past decade and is being used extensively throughout the field of medicine. Several orthopaedic surgery specialties have demonstrated that 3D printing technology can improve patient care and physician education. Foot and ankle pathology can be complex as the 3D anatomy can be challenging to appreciate. Deformity can occur in several planes simultaneously and bone defects either from previous surgery or trauma can further complicate surgical correction. Three-dimensional printing technology provides an avenue to tackle the challenges associated with complex foot and ankle pathology. A basic understanding of how these implants are designed and made is important for surgeons as this technology is becoming more widespread and the clinical applications continue to grow within foot and ankle surgery.Levels of Evidence: Level V.

A more defective substrate leads to a less defective passive layer: Enhancing the mechanical strength, corrosion resistance and anti-inflammatory response of the low-modulus Ti-45Nb alloy by grain refinement

Orthopedic and dental implants made of β-type Ti alloys have low elastic modulus which can better relieve the stress shielding effects after surgical implantation. Nevertheless, clinical application of β-type Ti alloys is hampered by the insufficient mechanical strength and gradual release of pro-inflammatory metallic ions under physiological conditions. In this study, the β-type Ti-45Nb alloy is subjected to high-pressure torsion (HPT) processing to refine the grain size. After HPT processing, the tensile strength increases from 370 MPa to 658 MPa due to grain boundary strengthening and at the same time, the favorable elastic modulus is maintained at a low level of 61-72 GPa because the single β-phase is preserved during grain refinement. More grain boundaries decrease the work function and facilitate the formation of thicker and less defective passive films leading to better corrosion resistance. In addition, more rapid repair of the passive layer mitigates release of metallic ions from the alloy and consequently, the inflammatory response is suppressed. The results reveal a strategy to simultaneously improve the mechanical and biological properties of metallic implant materials for orthopedics and dentistry. STATEMENT OF SIGNIFICANCE: The low modulus Ti-45Nb alloy is promising in addressing the complication of stress shielding induced by biomedical Ti-based materials with too-high elastic modulus. However, its insufficient strength hampers its clinical application, and traditional strengthening via heat treatments will compromise the low elastic modulus. In the current study, we enhanced the ultimate tensile strength of Ti-45Nb from 370 MPa to 658 MPa through grain-refinement strengthening, while the elastic modulus was maintained at a low value (61-72 GPa). Moreover, substrate grain-refinement has been proved to improve the corrosion resistance of Ti-45Nb with reduced inflammatory response both in vitro and in vivo. A relationship between the substrate microstructure and the surface passive layer has been established to explain the beneficial effects of substrate grain-refinement.

Oxygen Sensing of Pt/PEO-TiO2 in Humid Atmospheres at Moderate Temperatures

Here, we show that the presence of adsorbed water improves the oxygen-sensing properties of Pt/TiO2 at moderate temperatures. The studied interface is based on porous plasma electrolytic oxidized titanium (PEO-TiO2) covered with platinum clusters. The electrical resistance across Pt/PEO-TiO2 is explained by an electronic depletion layer. Oxygen adsorbates further increase the depletion by inducing extrinsic interface states, which are occupied by TiO2 conduction band electrons. The high oxygen partial pressure in ambient air substantially limits the electron transport across the interface. Our DC measurements at defined levels of humidity at 30 ∘C show that adsorbed water counteracts this shortcoming, allowing oxygen sensing at room conditions. In addition, response and recovery times from temporal oxygen exposure decrease with humidity. We attribute the effects to competing adsorption processes and reactions of water with adsorbed oxygen species and/or lattice oxygen, which involve electron re-injection to the TiO2 conduction band. Elevated temperatures up to 170 ∘C attenuate the effects, presumably due to the lower binding strength to the surface of molecular water compared with oxygen adsorbates.

Time Transient of Calcium and Phosphate Ion Adsorption by Rutile Crystal Facets in Hanks' Solution Characterized by XPS

For the elucidation of the mechanism of calcium phosphate formation on commercially pure titanium (CP Ti) in the human body, rutile TiO₂ single crystal plates with (001), (110), and (111) facets, namely, TiO₂(001), TiO₂(110), and TiO₂(111), and polycrystalline plates (TiO₂(poly)) were immersed in a simulated body fluid, Hanks' solution (Hanks), for 10⁰-10⁵ s, and the adsorption of calcium and phosphate ions was precisely characterized employing X-ray photoelectron spectroscopy (XPS). Previously published CP Ti data were used for comparison. Prior to immersion in Hanks, oxygen content was more than twice as high as that of titanium due to the existence of hydroxyl groups and water on the oxides. After immersion in Hanks, the composition and chemical state of the TiO₂ substrates remained unchanged. Among the electrolytes contained in Hanks, only calcium and phosphate ions were adsorbed by and incorporated onto TiO₂ surfaces. Adsorption of calcium ions onto rutile did not exhibit any systematic increase of calcium with immersion time except TiO₂(poly). Adsorption of phosphate ions was initially constant, followed by an increase with the logarithm of immersion time. The adsorption rate of phosphate ions decreased in the following order: TiO₂(001), TiO₂(poly), TiO₂(111), CP Ti, and TiO₂(110). The coordination number and band gap of each crystal facet of rutile is important for the adsorption and incorporation of phosphate ions. Regular calcium phosphate formation on CP Ti is possibly enabled by the surface oxide film, which consists chiefly of amorphous TiO₂. However, calcium phosphate formation kinetics on CP Ti differed from those on the TiO₂ crystalline phase. These findings may further the understanding of CP Ti hard tissue compatibility.

Evaluation and regulation of the corrosion resistance of macroporous titanium scaffolds with bioactive surface films for biomedical applications

A three-layer bioactive film on porous titanium was constructed and evaluated for its corrosion resistance via electrochemical analysis.