Photoinduced Charge Separation within Metallo-supramolecular Wires Built around a [Ru(bpy)3](2+)-Bisterpyridine Linear Entity

Metal-Terpyridine Assembled Functional Materials for Electrochromic, Catalytic and Environmental Applications

Molecular assembly induced by metal-terpyridine-based coordinative interactions has become an emergent research topic due to its ease of synthesis and diverse applications. This article highlights recent significant developments in the metal-terpyridine-based supramolecular architectures. At first, the design aspect of the molecular building blocks has been described, followed by elaboration on how the ligand backbone plays an important role for achieving different dimensionalities of the resulting assemblies which exhibit a wide range of potential applications. After that, we discussed different synthetic approaches for constructing these assemblies, and finally, we focused on their significant developments in three specific areas, viz., electrochromic materials, catalysis and a new application in wastewater treatment. In the field of electrochromic materials, these assemblies made important advancements in various aspects like sub-second switching time (<1 s), low switching voltage (<1 V), increased switching stability (>10000 cycles), tuning of multiple colors by using multimetallic systems, fabrication of charge storing electrochromic devices, utilizing and storing solar energy etc. Similarly, the catalysis field witnessed application of the metal-terpyridine assemblies in C-H monohalogenation, heterogeneous Suzuki-Miyaura coupling, photocatalysis, reduction of carbon dioxide, etc. Finally, the environmental application of these coordination assemblies includes capturing Cr(VI) from waste water efficiently with high capture capacity, good recyclability, wide pH independency etc.

Stepwise introduction of three different transition metals in metallo-supramolecular polymer for quad-color electrochromism

Metallo-supramolecular polymers (MSPs) show unique electrochemical and optical properties, that are different to organic polymers, caused by electronic interactions between metals and ligands. For the development of quad-color electrochromic materials, here we report the stepwise introduction of three different transition metal ions into an MSP, utilizing the different complexation abilities of the transition metals. An MSP with Os(II), Ru(II), and Fe(II) (polyOsRuFe) was synthesized via a stepwise synthetic route through the formation of an Os(II) complex first, followed by the introduction of Ru(II) to the Os(II) complex, and finally the attachment of Fe(II) to the Os(II)-Ru(II) complex to produce the polymer. This synthetic procedure was extended to fabricate MSPs that comprised Co(II)/Ru(II)/Os(II) and Zn(II)/Ru(II)/Os(II). The synthesized MSPs showed a broad optical and electrochemical window due to the coupling of three heterometallic segments into the polymer. Introducing acetate anion as the counter anion greatly enhanced the solubility of polyOsRuFe in methanol. A thin film of polyOsRuFe was prepared on ITO/glass by spin-coating the methanol solution, and its reversible quad-color electrochromism was demonstrated.

Synthesis of an Alternated Heterobimetallic Supramolecular Polymer Based on Ru(II) and Fe(II)

A heterobimetallic supramolecular polymer (polyRuFe) with alternately complexed Ru(II) and Fe(II) is prepared following a stepwise synthetic route through harnessing first the strongly binding metal ion Ru(II) and then the weakly binding metal ion Fe(II). A high yield of product is achieved in each step. The heterometal ions are incorporated into the polymer chain in identical coordination environments formed by two 2,2′:6′,2″-terpyridine moieties. Characterization is accomplished by NMR spectroscopy, MALDI–TOF mass spectrometry, UV–Vis spectroscopy, and cyclic voltammetry. PolyRuFe shows a wide optical window (λ = 311–577 nm) and a broad distinct reversible redox nature of two types, originated from the coupling of the two heterometallic segments into the polymer chain. Such characteristics of polyRuFe suggest its potential for various electrochemical and electro-optical applications.

Constructing Alternated Heterobimetallic [Fe(II)/Os(II)] Supramolecular Polymers with Diverse Solubility for Facile Fabrication of Voltage-Tunable Multicolor Electrochromic Devices

Metallo-supramolecular polymer (MSP)-based electrochromic devices (ECDs) have drawn much attention because of their variable colors and attractive electrochromic (EC) properties. However, fabrication of voltage-tunable multicolor ECDs using single MSP is yet hard to realize. We anticipated alternate introduction of two different redox-active metal ions in an MSP combined with the adjustment of counteranions could be a solution to fabricate multicolor ECDs. The heterometals will induce color variability upon voltage alteration, and counteranions will help to tune the solubility of MSP in different solvents. In an attempt to fulfill this target, we have synthesized four heterobimetallic supramolecular polymers (HBPs) having different counteranions (BF₄^-, Cl^-, PF₆^-, and OAc^-), in which Fe(II) and Os(II) are alternately complexed by two terpyridine units. To apply as EC material, the HBPs should be soluble in methanol and insoluble in acetonitrile for the preparation of EC film as well as ECDs. However, among the HBPs, only HBP-OAc is found to meet this requirement. The EC behaviors of the spray-coating film of HBP-OAc on an indium tin oxide (ITO)-coated glass substrate are investigated in terms of maximum transmittance contrast, coloration voltage, response time, coloration efficiency, and operational stability, which exhibits reversible multicolor electrochromism (the initial purple color of the film is changed to violet followed by greenish-yellow) upon alteration of the voltage from 0.0 to 0.7 V [required to oxidize the Os(II) ion] and to 1.0 V [required to oxidize the Fe(II) ion]. The film is also integrated into a laminated ECD by using lithium-based gel electrolyte. Finally, as a proof-of-concept, a prototype voltage-tunable multicolor EC display (6 cm × 2.5 cm) is fabricated by using a designed image containing a flower, leaves, and a flower pot, which exhibits six different types of multicolor image upon application of tunable voltages.

A nano-junction of self-assembled mixed-metal-centre molecular wires on transparent conductive oxides

The fabrication of stable, highly conductive molecular nano-junctions is one of the main research goals in the field of molecular electronics. In this paper we report on the self-assembly and functional characterisation of highly conductive molecular wires, based on mixed-metal polynuclear complexes, at the surface of a transparent conductive oxide. The adopted synthetic approach involves metal-coordination reactions on oxide surfaces, pre-functionalised with a monolayer of terpyridine moieties that are used as anchoring sites for the integration of ditopic, redox-active ruthenium-bisterpyridine molecules through iron(ii) centres. By the stepwise iteration of the iron-coordination reaction, molecular wires of the desired length can be prepared, which alternate iron and ruthenium centres in the wire backbone. The stepwise assembly of the wires at the transparent conductive oxide surface was characterised by means of UV-Vis spectroscopy and, at the nanoscale, by means of ToF-SIMS measurements. The electrical characteristics of the wires were obtained by the liquid-metal eutectic-gain nano-junction technique, with results that show good electron transport capabilities along the wires. The demonstrated feasibility of the integration of these metal-polypyridinic, redox-active, conductive wires at the surface of a transparent and conductive oxide, and the evidence for good electrical conduction indicates prospective applications in the field of nanoscale molecular optoelectronics.

[Cr(ttpy)2]3+ as a multi-electron reservoir for photoinduced charge accumulation

[Cr(ttpy)2]3+ (ttpy = 4'-(4-methylphenyl)-2,2':6,2''-terpyridine) exhibits rich electrochemical and photophysical properties. Cyclic voltammetry performed in CH3CN shows in the cathodic part the presence of three one-electron reversible systems at -0.47, -0.85 and -1.35 V vs. Ag/AgNO3 10-2 M. These systems are attributed to the reduction of the terpyridine ligands with a partial delocalization of the charge on the tolyl for the last reduction event. The three different reduced species were generated by exhaustive electrolysis and characterized by EPR and UV-visible spectroscopy; DFT calculations were performed to locate the spin density of the electrons added during the reduction. Visible light irradiation of [Cr(ttpy)2]3+ induces the population of a luminescent metal-centered excited state with a lifetime of 270 ns in deoxygenated CH3CN. This excited state can be quenched by an electron transfer process with triphenylphosphine (PPh3) or triethanolamine (TEOA). Using TEOA as a sacrificial electron donor, the doubly reduced species (i.e.[Cr(ttpy)2] +) can be generated under continuous irradiation. In the presence of [Ru(bpy)3]2+ as an additional photosensitizer, the photoreduction of [Cr(ttpy)2]3+ towards [Cr(ttpy)2]+ is accelerated. The trinuclear [{RuII(bpy)2(bpy-O-tpy)}2CrIII]7+ complex ([Ru2Cr]7+) in which a CrIII-bis-terpyridine centre is covalently linked to two RuII-tris-bipyridine moieties by oxo bridges has been synthesised. Its electrochemical, photophysical and photochemical properties were investigated in deoxygenated CH3CN. Cyclic voltammetry indicates only a poor electronic communication between the different subunits, whereas luminescence experiments show a strong quenching of the RuII* excited state by an intramolecular process. Continuous irradiation of [Ru2Cr]7+ under visible conditions in the presence of TEOA leads to [Ru2Cr]4+ where three electrons are stored on the [Cr(ttpy)] subunit.

Photoactive Molecular Dyads [Ru(bpy)3-M(ttpy)2] n+ on Gold (M = Co(III), Zn(II)): Characterization, Intrawire Electron Transfer, and Photoelectric Conversion

We propose in this work a stepwise approach to construct photoelectrodes. This takes advantage of the self-assembly interactions between thiol with a gold surface and terpyridine ligands with first-row transition metals. Here, a [Ru(bpy)₃]²⁺ photosensitive center bearing a free terpyridine group has been used to construct two linear dyads on gold (Au/[Zn^II-Ru^II]⁴⁺ and Au/[Co^III-Ru^II]⁵⁺). The stepwise construction was characterized by electrochemistry, quartz crystal microbalance, and atomic force microscopy imaging. The results show that the dyads behave as rigid layers and are inhomogeneously distributed on the surface. The surface coverages are estimated to be in the order of 10^-11 mol cm^-2. The kinetics of the heterogeneous electron transfer is determined on modified gold ball microelectrodes using Laviron's formula. The oxidation rates of the terminal Ru(II) subunits are estimated to be 700 and 2300 s^-1 for Au/[Zn^II-Ru^II]⁴⁺ and Au/[Co^III-Ru^II]⁵⁺, respectively. In the latter case, the rate is limited by the kinetics of electron transfer between an intermediate Co(II) center and the gold surface. For Au/[Zn^II-Ru^II]⁴⁺, the Zn-bis-terpyridine center is not involved in the electron-transfer process and the oxidation of the Ru(II) subunit occurs through a superexchange process. In the presence of a tertiary amine in solution, the electrodes at a bias of 0.12 V behave as photoanodes when subjected to visible light irradiation. The magnitude of the photocurrent is around 10 μA cm^-2 for Au/[Co^III-Ru^II]⁵⁺ and 5 μA cm^-2 for Au/[Zn^II-Ru^II]⁴⁺, proving the importance of an electron relay on the photon-to-current conversion. The results suggest an efficient conversion for Au/[Co^III-Ru^II]⁵⁺, since each bound dyad, once excited, injects an electron around 10 times per second.

Terpyridine-Based Monolayer Electrochromic Materials

Novel electrochromic (EC) materials were developed and formed by a two-step chemical deposition process. First, a self-assembled monolayer (SAM) of 2,2':6',2″-terpyridin-4'-ylphosphonic acid, L, was deposited on the surface of a nanostructured conductive indium-tin oxide (ITO) screen-printed support by simple submerging of the support into an aqueous solution of L. Further reaction of the SAM with Fe or Ru ions results in the formation of a monolayer of the redox-active metal complex covalently bound to the ITO support (Fe-L/ITO and Ru-L/ITO, respectively). These novel light-reflective EC materials demonstrate a high color difference, significant durability, and fast switching speed. The Fe-based material shows an excellent change of optical density and coloration efficiency. The results of thermogravimetric analysis suggest high thermal stability of the materials. Indeed, the EC characteristics do not change significantly after heating of Fe-L/ITO at 100 °C for 1 week, confirming the excellent stability and high EC reversibility. The proposed fabrication approach that utilizes interparticle porosity of the support and requires as low as a monolayer of EC active molecule benefits from the significant molecular economy when compared with traditional polymer-based EC devices and is significantly less time-consuming than layer-by-layer growth of coordination-based molecular assemblies.

Repairable photoactive polymer systems via metal–terpyridine-based self-assembly

The photocatalytic activity of polymeric systems ceased upon disassembly and was restored upon assembly through metal ion–ligand interaction.