Dual-Mode Luminescent Nanopaper Based on Ultrathin g-C3N4 Nanosheets Grafted with Rare-Earth Upconversion Nanoparticles

Modification of the electronic structure of g-C3N4 using urea to enhance the visible light-assisted degradation of organic pollutants

Graphitic carbon nitride has been proven to be a good candidate for using solar energy for photo-induced pollutant degradation. However, the high photo-induced holes-electron recombination rate, unfavorable morphology, and textural properties limited their application. In this study, we present a novel g-C3N4 with a novel electronic structure and physiochemical properties by introducing a single nitrogen in the graphitic network of the g-C3N4 through a novel method involving step-by-step co-polycondensation of melamine and urea. Through extensive characterization using techniques such as XPS, UPS-XPS, Raman, XRD, FE-SEM, TEM, and N2 adsorption-desorption, we analyze the electronic and crystallographic properties, as well as the morphology and textural features of the newly prepared g-C3N4 (N-g-C3N4). This material exhibits a lower C/N ratio of 0.62 compared to conventional g-C3N4 and a reduced band gap of 2.63 eV. The newly prepared g-C3N4 demonstrates a distinct valance band maxima that enhances its photo-induced oxidation potential, improving photocatalytic activity in degrading various organic pollutants. We thoroughly investigate the photocatalytic degradation performance of N-g-C3N4 for Congo red (CR) and sulfamethoxazole (SMX), and removal of up to 90 and 86% was attained after 2 h at solution pH of 5.5 for CR and SMX. The influence of different parameters was examined to understand the degradation mechanism and the influence of reactive oxygenated species. The catalytic performance is also evaluated in the degradation of various organic pollutants, and it showed a good performance.

Understanding the intermediates and carbon dioxide adsorption of potassium chloride-incorporated graphitic carbon nitride with tailoring melamine and urea as precursors

In this study, we demonstrated the synthesis of potassium chloride (KCl)-incorporated graphitic carbon nitride, (g-C₃N₄, CN) with varying amounts of N-vacancies and pyridinic-N as well as enhanced Lewis basicity, via a single-step thermal polymerization by tailoring the precursors of melamine and urea for carbon oxide (CO₂) capture. Melamine, as a precursor, undergoes a phase transformation into melam and triazine-rich g-C₃N₄, whereas the addition of urea polymerizes the mixture to form melem and heptazine-rich g-C₃N₄ (CN11). Owing to the abundance of pyridinic-N and the high surface area, CN11 adsorbed higher amounts of CO₂ (44.52 μmol m^-2 at 25 °C and 1 bar of CO₂) than those reported for other template-free carbon materials. Spectroscopic analysis revealed that the enhanced CO₂ adsorption is due to the presence of pyridinic-N and Lewis basic sites on the surface. The intermediates of CO₂adsorption, including carbonate and bicarbonate species, attached to the CN samples were identified using in-situ Fourier-transform infrared spectroscopy (FTIR). This work provides insights into the mechanism of CO₂ adsorption by comparing the structural features of the synthesized KCl-incorporated g-C₃N₄ samples_. CN11, with an excellent CO₂ uptake capacity, is viewed as a promising candidate for CO₂ capture and storage.

Gadolinium molybdate decorated graphitic carbon nitride composite: highly visualized detection of nitrofurazone in water samples

In this work, a graphitic carbon nitride/gadolinium molybdate (g-C₃N₄/Gd₂MoO₆) composite manufactured glassy carbon electrode (GCE) was used to detect nitrofurazone (NFZ) at the trace level. A quick and inexpensive electrochemical sensor for NFZ analysis is described in this paper. The material structure and properties were determined by scanning electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, Fourier-transform infrared spectroscopy, and transmission electron microscopy. The GCE/g-C₃N₄/Gd₂MoO₆ electrode was studied using cyclic voltammetry and amperometry. The electrocatalytic studies of the GCE/g-C₃N₄/Gd₂MoO₆ electrode showed significantly improved detection of NFZ. The electrocatalytic studies of the GCE/g-C₃N₄/Gd₂MoO₆ electrode was significantly improved for the detection of NFZ than bare GCE, GCE/g-C₃N₄, and GCE/Gd₂MoO₆ modified electrodes. The linear response and the detection limit of NFZ were 0.006 μM (S/N = 3) and 0.02-2000 μM, respectively. The electrode sensitivity was identified as 2.057 μA μM^-1 cm^-2 under ideal experimental conditions. The modified electrode was able to detect NFZ even when there were 500-fold as many interfering ions present. The practical applicability of the electrode was tested in a variety of water samples, with satisfactory results. Overall, the NFZ sensor demonstrated satisfactory repeatability, stability, and reproducibility. Meanwhile, it has proven to be a reliable, stable, and practical platform for the analysis of NFZ in various water samples, with acceptable recoveries.

Boosting the Quantum Yield of Oxygen-Doped g-C3N4 via a Metal-Azolate Framework-Enhanced Electron-Donating Strategy for Highly Sensitive Sulfadimethoxine Tracing

Two of the most persistent challenges for the sensing applications of luminescent carbon nitride-based materials are poor quantum yields and aggregation-induced luminescence quenching in aqueous environments. Herein, a highly emissive oxygen-doped carbon nitride composite (OCNP@M7) was synthesized, with a metal-azolate framework (MAF-7) serving as a luminous booster. Both experimental studies and theoretical calculations suggest that the MAF-enhanced electron-donating effect dramatically promoted the electron density on the π-structure of oxygen-doped carbon nitride. In addition, the structural rigidity of MAF-7 effectively inhibits both aggregation and nonradiative energy dissipation. Consequently, OCNP@M7 exhibits strong and stable blue emission under UV light irradiation and an absolute quantum yield up to 95.2%, which is, as far as we know, the highest value among fluorescent carbon nitride materials in solution ever reported. OCNP@M7 could further function as a high-efficiency fluorescent probe for the sensitive detection of sulfadimethoxine residues in complex environments. It is anticipated that this strategy can be extended to fabricate various carbon nitride-based antibiotic monitoring systems with tailor-made functions.

Energy Migration Control of Multimodal Emissions in an Er3+ -Doped Nanostructure for Information Encryption and Deep-Learning Decoding

Modulating the emission wavelengths of materials has always been a primary focus of fluorescence technology. Nanocrystals (NCs) doped with lanthanide ions with rich energy levels can produce a variety of emissions at different excitation wavelengths. However, the control of multimodal emissions of these ions has remained a challenge. Herein, we present a new composition of Er³⁺ -based lanthanide NCs with color-switchable output under irradiation with 980, 808, or 1535 nm light for information security. The variation of excitation wavelengths changes the intensity ratio of visible (Vis)/near-infrared (NIR-II) emissions. Taking advantage of the Vis/NIR-II multimodal emissions of NCs and deep learning, we successfully demonstrated the storage and decoding of visible light information in pork tissue.

Fluorescent g-C3N4 nanosheets enhanced photosynthetic efficiency in maize

Nano-enabled agriculture becomes a new and rapidly evolving area of research, particularly, nanomaterials (NMs) with light-harvesting capacities for enhancing photosynthesis. However, mechanisms for the interactions between these NMs and plants are not fully understood. Herein, fluorescent and water-soluble graphitic carbon nitride (g-C₃N₄) nanosheets were prepared and used as artificial antenna to amplify light harvesting ability and enhance photosynthesis in maize. Upon root exposure to 10 mg·L^-1 g-C₃N₄ nanosheets, the g-C₃N₄ can be taken up and distributed in leaves. Also, the nutrients (Mg, P, Fe, and Mn), chlorophyll content, electron transfer rate, net photosynthetic rate, and carbohydrates content in maize were increased significantly by 1.1%, 51.8%, 44.6%, 121.8%, 12.1%, 44.5%, 30.0% and 32.3%, respectively. In addition, the gene expressions of psbA (photosystem II reaction center protein A) and psaA (photosystem I P700 chlorophyll A apoprotein A1) were up-regulated by 56.3% and 26.8%, respectively. Moreover, the activities of phosphoenolpyruvate carboxylase (PEPC) and ribulose-1,5-bisphosphate carboxylase/oxygenase (Rubisco) were significantly increased by 242.3% and 156.3%, respectively. This study provides a new perspective on the use of g-C₃N₄ nanosheets to promote plant growth and develop nano-enabled agricultural technology.

Facile synthesis of highly fluorescent free-standing films comprising graphitic carbon nitride (g-C3N4) nanolayers

The free-standing g-C₃N₄ films were fabricated by thermal condensation of C₂H₄N₄ at 600 °C in a low pressure of Ar atmosphere. The as-synthesized g-C₃N₄ films exhibited stable and strong photoluminescence emission centered around 455–460 nm.

Heterogeneous growth of palladium nanocrystals on upconversion nanoparticles for multimodal imaging and photothermal therapy

Based on the heterogeneous growth of nano-palladium on UCNPs, a new kind of nanocomposite was developed that can be used for dual-imaging guided photothermal therapy. This smart strategy provides new insights for future development of materials based on the multicomponent nanocomposites.

Confined Synthesis of Carbon Nitride in a Layered Host Matrix with Unprecedented Solid-State Quantum Yield and Stability

Fluorescent carbon nanomaterials have drawn tremendous attention for their intriguing optical performances, but their employment in solid-state luminescent devices is rather limited as a result of aggregation-induced photoluminescence quenching. Herein, ultrathin carbon nitride (CN) is synthesized within the 2D confined region of layered double hydroxide (LDH) via triggering the interlayer condensation reaction of citric acid and urea. The resulting CN/LDH phosphor emits strong cyan light under UV-light irradiation with an absolute solid-state quantum yield (SSQY) of 95.9 ± 2.2%, which is, to the best of our knowledge, the highest value of carbon-based fluorescent materials ever reported. Furthermore, it exhibits a strong luminescence stability toward temperature, environmental pH, and photocorrosion. Both experimental studies and theoretical calculations reveal that the host-guest interactions between the rigid LDH matrix and interlayer carbon nitride give the predominant contribution to the unprecedented SSQY and stability. In addition, prospective applications of the CN/LDH material are demonstrated in both white light-emitting diodes and upconversion fluorescence imaging of cancer cells.

Pt-Ni nanoframes functionalized with carbon dots: an emerging class of bio-nanoplatforms

We designed a unique and novel bio-nanoplatform based on Pt-Ni nanoframes (PNnf) functionalized with carbon dots via the EDC/NHS coupling chemistry. The PNnf with open three-dimensional surfaces exhibited excellent water solubility after polyethylenimine modification. Due to low cytotoxicity and excellent biocompatibility, the bio-nanoplatforms were firstly used for MCF-7 cell imaging in vitro. More importantly, the design strategy can be readily generalized to facilitate other multi-functional bio-nanoplatforms for biological and biomedical applications.

Multifunctional UCNPs@MnSiO3@g-C3N4 nanoplatform: improved ROS generation and reduced glutathione levels for highly efficient photodynamic therapy

Photodynamic therapy (PDT) is a novel technique that has been extensively employed in cancer treatment; it utilizes reactive oxygen species to kill malignant cells.