Ultrafine Mn3O4 Nanowires/Three-Dimensional Graphene/Single-Walled Carbon Nanotube Composites: Superior Electrocatalysts for Oxygen Reduction and Enhanced Mg/Air Batteries

Robust Strategy of Quasi-Solid-State Electrolytes to Boost the Stability and Compatibility of Mg Ion Batteries

Magnesium ion batteries (MIBs) have attracted a lot of attention because of the natural abundance of magnesium, high volumetric energy density, and superior safety. Nevertheless, MIBs are still in their infancy because of the significant challenge in developing a suitable electrolyte with low flammability, high ionic conductivity, and compatibility with the Mg anode. Herein, we construct rechargeable quasi-solid-state MIBs based on tailored polymer electrolytes. The quasi-solid state electrolyte of poly(vinylidene fluoride-co-hexafluoropropylene)-nanosized SiO₂-Mg(TFSI)₂ combines the outstanding dynamic property of a liquid electrolyte and the good stability of a solid-state electrolyte. It exhibits a highly reversible Mg²⁺ deposition-dissolution capability, high ion conductivity (0.83 mS cm^-1), and superior compatibility with the Mg metal and cathode. The quasi-solid-state MIBs with a layered titanic oxide cathode show a high reversible capacity of 129 mA h g^-1 at 50 mA g^-1 (150 W h kg^-1) without any decay after 100 cycles.

Highly Exposed Active Sites of Fe/N Co-doped Defect-rich Graphene as an Efficient Electrocatalyst for Oxygen Reduction Reaction

A defect-rich interconnected hierarchical three-dimensional Fe and N co-doped graphene has been prepared by a facile synthesis with poly (2,5-benzimidazole) (ABPBI) as nitrogen and carbon sources and CaCO₃ as the template. ABPBI possesses abundant nitrogen, and pyrolysis of ABPBI is helpful to form graphene structure. CaCO₃ and its decomposition products CO₂ can promote the formation of interconnected hierarchical porous three-dimensional graphene, which possesses more defects and exposed active sites. Benefiting from the defective catalysis mechanism, rich defect catalysts are applied as electrode materials to enhance the catalytic performance for oxygen reduction reaction (ORR). Electrochemically, the half-wave potential (E_1/2 ) of Fe-3D-NG#800 is 0.84 V (vs. RHE), and the accelerated durability tests shows the E_1/2 of Fe-3D-NG#800 shifted by a 21 mV drop after cyclic voltammetry scanning for 5000 cycles. Therefore, Fe-3D-NG#800 has excellent activity and durability than 20 wt % Pt/C.

Synthesis and Electrochemical Study of Three-Dimensional Graphene-Based Nanomaterials for Energy Applications

Graphene is an attractive soft material for various applications due to its unique and exclusive properties. The processing and preservation of 2D graphene at large scales is challenging due to its inherent propensity for layer restacking. Three-dimensional graphene-based nanomaterials (3D-GNMs) preserve their structures while improving processability along with providing enhanced characteristics, which exhibit some notable advantages over 2D graphene. This feature article presents recent trends in the fabrication and characterization of 3D-GNMs toward the study of their morphologies, structures, functional groups, and chemical compositions using scanning electron microscopy, X-ray diffraction, Raman spectroscopy, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy. Owing to the attractive properties of 3D-GNMs, which include high surface areas, porous structures, improved electrical conductivity, high mechanical strength, and robust structures, they have generated tremendous interest for various applications such as energy storage, sensors, and energy conversion. This article summarizes the most recent advances in electrochemical applications of 3D-GNMs, pertaining to energy storage, where they can serve as supercapacitor electrode materials and energy conversion as oxygen reduction reaction catalysts, along with an outlook.

Ultrasensitive sandwich-type immunosensor for cardiac troponin I based on enhanced electrocatalytic reduction of H2O2 using β-cyclodextrins functionalized 3D porous graphene-supported Pd@Au nanocubes

A signal amplification principle based on increased electrocatalytic reduction of H₂O₂ by the CDs-3D-PG-Pd@Au NCs using the mediated effect of Th.

Spinel MnCo2 O4 Nanoparticles Supported on Three-Dimensional Graphene with Enhanced Mass Transfer as an Efficient Electrocatalyst for the Oxygen Reduction Reaction

The rational design of highly efficient and durable oxygen reduction reaction (ORR) catalysts is critical for the commercial application of fuel cells. Herein, three-dimensional graphene (3D-G) is synthesized by the template method, which used coal tar pitch as the carbon source and nano MgO as the template. Then, spinel MnCo₂ O₄ is in situ supported on the 3D-G by a facile hydrothermal method, giving MnCo₂ O₄ /3D-G. The resultant MnCo₂ O₄ /3D-G retains the multilayered mesoporous graphene structure where MnCo₂ O₄ nanoparticles are deposited on the inner walls of pores in the 3D-G. The catalyst MnCo₂ O₄ /3D-G shows high electrocatalytic activity with a half-wave potential of 0.81 V versus reversible hydrogen electrode, which is clearly superior to those of MnCo₂ O₄ /reduced graphene oxide (0.78 V), MnCo₂ O₄ /carbon nanotubes (0.74 V), MnCo₂ O₄ /C (0.72 V), and 20 wt % Pt/C (0.80 V). The electron transfer number of MnCo₂ O₄ /3D-G indicates a four-electron process of ORR. The durability test demonstrates that the MnCo₂ O₄ /3D-G catalyst has a much better durability than 20 wt % Pt/C. Our work makes an inspiring strategy to prepare high-performance electrocatalysts for the development of fuel cells.

Mn3O4 Quantum Dots Supported on Nitrogen-Doped Partially Exfoliated Multiwall Carbon Nanotubes as Oxygen Reduction Electrocatalysts for High-Performance Zn-Air Batteries

Highly efficient and low-cost nonprecious metal electrocatalysts that favor a four-electron pathway for the oxygen reduction reaction (ORR) are essential for high-performance metal-air batteries. Herein, we show an ultrasonication-assisted synthesis method to prepare Mn₃O₄ quantum dots (QDs, ca. 2 nm) anchored on nitrogen-doped partially exfoliated multiwall carbon nanotubes (Mn₃O₄ QDs/N-p-MCNTs) as a high-performance ORR catalyst. The Mn₃O₄ QDs/N-p-MCNTs facilitated the four-electron pathway for the ORR and exhibited sufficient catalytic activity with an onset potential of 0.850 V (vs reversible hydrogen electrode), which is only 38 mV less positive than that of Pt/C (0.888 V). In addition, the Mn₃O₄ QDs/N-p-MCNTs demonstrated superior stability than Pt/C in alkaline solutions. Furthermore, a Zn-air battery using the Mn₃O₄ QDs/N-p-MCNTs cathode catalyst successfully generated a specific capacity of 745 mA h g^-1 at 10 mA cm^-2 without the loss of voltage after continuous discharging for 105 h. The superior ORR activity of Mn₃O₄ QDs/N-p-MCNTs can be ascribed to the homogeneous Mn₃O₄ QDs loaded onto the N-doped carbon skeleton and the synergistic effects of Mn₃O₄ QDs, nitrogen, and carbon nanotubes. The interface binding energy of -3.35 eV calculated by the first-principles density functional theory method illustrated the high stability of the QD-anchored catalyst. The most stable adsorption structure of O₂, at the interface between Mn₃O₄ QDs and the graphene layer, had the binding energy of -1.17 eV, greatly enhancing the ORR activity. In addition to the high ORR activity and stability, the cost of production of Mn₃O₄ QDs/N-p-MCNTs is low, which will broadly facilitate the real application of metal-air batteries.

Li4Ti5O12 nanosquares@ultrathin carbon nanofilms on a large scale with enhanced properties in lithium-ion batteries

Ultra-thin C-LTO nanosquares with high crystallinity were synthesized on a large scale and their electrochemical performance was measured in 18 650 batteries.