Poly(styrenesulfonate)-Modified Ni-Ti Layered Double Hydroxide Film: A Smart Drug-Eluting Platform

Durable Nano-Flower Structured Foam Coupled with Electrically-Driven in Situ Aeration Enable High-Flux Oil/Water Emulsion Separation with Dynamic Antifouling Ability

The conventional membranes used for separating oil/water emulsions are typically limited by the properties of the membrane materials and the impact of membrane fouling, making continuous long-term usage unachievable. In this study, a filtering electrode with synchronous self-cleaning functionality is devised, exhibiting notable antifouling ability and an extended operational lifespan, suitable for the continuous separation of oil/water emulsions. Compared with the original Ti foam, the in situ growth of NiTi-LDH (Layered double hydroxide) nano-flowers endows the modified Ti foam (NiTi-LDH/TF) with exceptional superhydrophilicity and underwater superoleophobicity. Driven by gravity, a rejection rate of over 99% is achieved for various emulsions containing oil content ranging from 1% to 50%, as well as oil/seawater emulsions. The flux recovery rate exceeds 90% after one hundred cycles and a 4-h filtration period. The enhanced separation performance is realized through the "gas bridge" effect during in situ aeration and electrochemical anodic oxidation. The internal aeration within the membrane pores contributes to the removal of oil foulants. This study underscores the potential of coupling foam metal filtration materials with electrochemical technology, providing a paradigm for the exploration of novel oil/water separation membranes.

NiTi-Layered Double Hydroxide@Carbon Nanotube as a Cathode Material for Chloride-Ion Batteries

Chloride-ion batteries (CIBs) are one of the promising candidates for energy storage due to their low cost, high theoretical energy density and high safety. However, the limited types of cathode materials in CIBs have hindered their development. In this work, a NiTi-LDH@CNT composite is prepared using a reverse microemulsion method and applied in CIBs for the first time. The specific surface area and the pore volume of the obtained NiTi-LDH@CNT composites can reach 266 m2 g-1 and 0.42 cm3 g-1, respectively. Electrochemical tests indicate that the composite electrode delivers a reversible specific capacity of 69 mAh g-1 after 150 cycles at a current density of 100 mA g-1 in 0.5 M PP14Cl/PC electrolyte. Ni2+/Ni3+ and Ti3+/Ti4+ valence changes during electrochemical cycling are demonstrated by X-ray photoelectron spectroscopy (XPS), while reversible migration of Cl- is revealed by ex-situ EDS and ex-situ XRD. The stable layered structure and abundant valence changes of the NiTi-LDH@CNT composite make it an exceptional candidate as a cathode material for CIBs.

Layered double hydroxide-based nanomaterials for biomedical applications

Against the backdrop of increased public health awareness, inorganic nanomaterials have been widely explored as promising nanoagents for various kinds of biomedical applications. Layered double hydroxides (LDHs), with versatile physicochemical advantages including excellent biocompatibility, pH-sensitive biodegradability, highly tunable chemical composition and structure, and ease of composite formation with other materials, have shown great promise in biomedical applications. In this review, we comprehensively summarize the recent advances in LDH-based nanomaterials for biomedical applications. Firstly, the material categories and advantages of LDH-based nanomaterials are discussed. The preparation and surface modification of LDH-based nanomaterials, including pristine LDHs, LDH-based nanocomposites and LDH-derived nanomaterials, are then described. Thereafter, we systematically describe the great potential of LDHs in biomedical applications including drug/gene delivery, bioimaging diagnosis, cancer therapy, biosensing, tissue engineering, and anti-bacteria. Finally, on the basis of the current state of the art, we conclude with insights on the remaining challenges and future prospects in this rapidly emerging field.

Preparation, characterization, corrosion behavior and cytocompatibility of NiTiO3 nanosheets hydrothermally synthesized on biomedical NiTi alloy

The present work reports on the hydrothermal synthesis of nanosheets on biomedical NiTi alloy in pure water. The results show rhombohedral NiTiO₃ nanosheets with thickness of 6 nm can be grown at 200 °C. Hydrothermal treatment enhances the corrosion resistance of the NiTi alloy. 30 min of the treatment significantly reduces Ni ion release, while prolonged hydrothermal time results in increased Ni ion release because of the growth of the nanosheets with large specific surface area. Excitingly, the nanosheets can well support cell growth, which suggests the release amount can be well tolerated. Good corrosion resistance and cytocompatibility combined with large specific surface area render the nanosheets promising as safe and efficient drug carriers of the biomedical NiTi alloy.

Effect of Polyelectrolyte Mono- and Bilayer Formation on the Colloidal Stability of Layered Double Hydroxide Nanoparticles

Sequential adsorption of polyelectrolytes on nanoparticles is a popular method to obtain thin films after deposition. However, the effect of polyelectrolyte multilayer formation on the colloidal stability of the nanoparticles has not been studied in detail. In the present work, layered double hydroxides (LDH) were synthesized and interaction with oppositely and like-charged polyelectrolytes was investigated. Electrophoretic and light scattering measurements revealed that colloidal stability of LDH can be tuned by adsorption of poly(styrene sulfonate) (PSS) on the oppositely charged LDH surface in appropriate doses and thus, unstable or stable dispersions can be designed. Negatively charged LDH of adsorbed PSS monolayer was obtained and a poly(diallyldimethyl ammonium chloride) (PDADMAC) second layer was systematically built on the particles. The obtained polyelectrolyte bilayer provided high colloidal stability for the LDH-PSS-PDADMAC dispersions due to the presence of repulsive interparticle forces of electrostatic and steric origin. The results provide crucial quantitative information on designing highly stable particle-polyelectrolyte systems for the preparation of thin films or immobilization of guest substances between the layers for delivery processes.

Regulating the local pH level of titanium via Mg-Fe layered double hydroxides films for enhanced osteogenesis

Hard tissue implant materials which can cause a suitable alkaline microenvironment are thought to be beneficial for stimulating osteoblast differentiation while suppressing osteoclast generation. To make the local pH around the interface between materials and cells controllable, we prepared a series of Mg-Fe layered double hydroxide (LDH) films on acid-etched pure titanium surfaces via hydrothermal treatment. By adjusting the Mg/Fe proportion ratio, the interlayer spacing of Mg-Fe LDHs was regulated, making their OH- exchange abilities adjustable, and this ultimately resulted in a microenvironment with a controllable pH value. In vitro experiments demonstrated that the Mg-Fe LDH film-modified titanium surface possessed good biocompatibility and osteogenic activity, especially the Mg-Fe LDH film with Mg/Fe proportion ratio of 4, which could form a suitable alkaline microenvironment for the growth and osteogenetic differentiation of stem cells. These results demonstrate the potential application of the prepared Mg-Fe LDH films in enhancing the osteogenesis of implant materials while providing a new way into the design of controllable alkaline environment.

NIR-Triggered Crystal Phase Transformation of NiTi-Layered Double Hydroxides Films for Localized Chemothermal Tumor Therapy

Construction of localized drug-eluting systems with synergistic chemothermal tumor-killing abilities is promising for biomedical implants directly contacting with tumor tissues. In this study, an intelligent and biocompatible drug-loading platform, based on a gold nanorods-modified butyrate-inserted NiTi-layered double hydroxides film (Au@LDH/B), is prepared on the surface of nitinol alloy. The prepared films function as drug-loading "sponges," which pump butyrate out under near-infrared (NIR) irradiation and resorb drugs in water when the NIR laser is shut off. The stimuli-responsive release of butyrate is verified to be related with the NIR-triggered crystal phase transformation of Au@LDH/B. In vitro and in vivo studies reveal that the prepared films possess excellent biosafety and high efficiency in synergistic thermochemo tumor therapy, showing a promising application in the construction of localized stimuli-responsive drug-delivery systems.

Preparation of MgAl-EDTA-LDH based electrospun nanofiber membrane and its adsorption properties of copper(II) from wastewater

Adsorption is recognized as one of the most promising technologies applied to remove heavy metals from contaminated water. However, the adsorption efficiency often decreases because of the aggregation and loss of adsorbents. Herein, a novel adsorbent was synthesized by intercalation ethylenediaminetetraacetic acid (EDTA) into layered double hydroxides (LDH) and subsequent encapsulated into PAN polymer matrix using electrospinning. The synthesized electrospun nanofiber membrane (MgAl-EDTA-LDH@PAN) was found to combine the advantages of LDH@PAN nanofiber membrane (high surface area, easy to separate, free from aggregation and loss) and EDTA (powerful chelating agent). The adsorption performance of the MgAl-EDTA-LDH@PAN was evaluated using Cu(II) as target metals by varying experimental conditions such as pH, contact time, initial adsorbent dosage, and temperature. The maximum adsorption capacity of MgAl-EDTA-LDH@PAN was 120.77mg/g with the initial Cu(II) concentrations ranging from 0.6 to 40mg/L. MgAl-EDTA-LDH@PAN was also used in real industrial contaminated water treatment, and the final effluent was approximate to class-I criteria of the National Wastewater Discharge Standard of China. (GB 8978-1996). In addition, Cu K-edge XAS and XPS analyses were applied for unraveling the adsorptive performance of MgAl-EDTA-LDH@PAN by revealing the molecular-level mechanism of Cu(II) uptake.

In situpolymerization of sulfonated polyaniline in layered double hydroxide host matrix for corrosion protection

Sulfonated polyaniline/layered double hydroxides were synthesizedvia in situpolymerization in host matrix, displaying significant anti-corrosive performance.