Encaging Palladium Nanoparticles in Chitosan Modified Montmorillonite for Efficient, Recyclable Catalysts

Mechanism of self-supporting montmorillonite composite material for bio-enhanced degradation of chlorotetracycline: Electron transfer and microbial response

The efficient degradation of antibiotics holds significant implications for mitigating environmental pollution. This study synthesized a montmorillonite chitosan composite material (MMT-CS) using the gel template method. Subsequently, a bio-enhanced reactor was constructed to facilitate the degradation of chlorotetracycline (CTC). The addition of MMT-CS composite material enables the degradation of different concentrations of CTC. MMT-CS, a conductive carrier, effectively promotes microbial adhesion and boosts the metabolic activity of functional microorganisms. Additionally, it facilitates the maintenance of microbial activity under CTC pressure by promoting the secretion of extracellular polymeric substances, increasing critical enzyme activity, and enhancing the electron transfer capacity within the system. In this MMT-CS bio-enhanced process, Paracoccus (11.4%) and Bacillus (3.9%) are utilized as essential bacteria genes. The results of metabolic pathways prediction indicated significant enhancements in membrane-transport, nucleotide-metabolism, replication-repair, and lipid-metabolism. Thus, the developed self-supporting MMT-CS bio-enhanced process ensured the stability of the system during the removal of antibiotics.

Palladium Supported on Bioinspired Materials as Catalysts for C–C Coupling Reactions

In recent years, the immobilization of palladium nanoparticles on solid supports to prepare active and stable catalytic systems has been deeply investigated. Compared to inorganic materials, naturally occurring organic solids are inexpensive, available and abundant. Moreover, the surface of these solids is fully covered by chelating groups which can stabilize the metal nanoparticles. In the present review, we have focused our attention on natural biomaterials-supported metal catalysts applied to the formation of C–C bonds by Mizoroki–Heck, Suzuki–Miyaura and Sonogashira reactions. A systematic approach based on the nature of the organic matrix will be followed: (i) metal catalysts supported on cellulose; (ii) metal catalysts supported on starch; (iii) metal catalysts supported on pectin; (iv) metal catalysts supported on agarose; (v) metal catalysts supported on chitosan; (vi) metal catalysts supported on proteins and enzymes. We will emphasize the effective heterogeneity and recyclability of each catalyst, specifying which studies were carried out to evaluate these aspects.

Progresses in chitin, chitosan, starch, cellulose, pectin, alginate, gelatin and gum based (nano)catalysts for the Heck coupling reactions: A review

Heck cross-coupling reaction (HCR) is one of the few transition metal catalyzed CC bond-forming reactions, which has been considered as the most effective, direct, and atom economical synthetic method using various catalytic systems. Heck reaction is widely employed in numerous syntheses including preparation of pharmaceutical and biologically active compounds, agrochemicals, natural products, fine chemicals, etc. Commonly, Pd-based catalysts have been used in HCR. In recent decades, the application of biopolymers as natural and effective supports has received attention due to their being cost effective, abundance, and non-toxicity. In fact, recent studies demonstrated that biopolymer-based catalysts had high sorption capacities, chelating activities, versatility, and stability, which make them potentially applicable as green materials (supports) in HCR. These catalytic systems present high stability and recyclability after several cycles of reaction. This review aims at providing an overview of the current progresses made towards the application of various polysaccharide and gelatin-supported metal catalysts in HCR in recent years. Natural polymers such as starch, gum, pectin, chitin, chitosan, cellulose, alginate and gelatin have been used as natural supports for metal-based catalysts in HCR. Diverse aspects of the reactions, different methods of preparation and application of polysaccharide and gelatin-based catalysts and their reusability have been reviewed.

Efficient and Recyclable Heterogeneous Catalyst Based on PdNPs Stabilized on a Green-Synthesized Graphene-like Nanomaterial: Effect of Surface Functionalization

This work reports for the first time a straightforward and efficient approach to covalent surface functionalization of a sustainable graphene-like nanomaterial with abundant carboxylic acid groups. This approach results in an efficient and robust chelatant platform for anchoring highly dispersed ultrasmall palladium particles with excellent catalytic activity in the reduction of both cationic (methylene blue, MB) and anionic (eosin-Y, Eo-Y) toxic organic dyes. The large-specific-surface-area (S_BET = 266.94 m²/g) graphene-like nanomaterial (GHN) was prepared through a green and cost-effective pyrolysis process from saccharose using layered bentonite clay as a template. To introduce a high density of carboxylic acid functions, GHN was first doubly functionalized by successive grafting reaction using two different strategies: (i) in the first case, GHN was first grafted by (3-glycidyloxypropyl) trimethoxysilane (GPTMS) and then bifunctionalized by chemical grafting of tris(4-hydroxyphenyl)methane triglycidyl ether (TGE). In the second case, the grafting order of the two molecules has been reversed. GHN-GPTMS-TGE provided the highest number of grafted reactive epoxy groups, and it was selected for further functionalization with carboxylic acid functions via a ring-opening reaction through a two-step hydrolysis (H₂SO₄)/oxidation (KMnO₄) approach. The GHN nanomaterial bearing carboxylic acid groups was then treated with sodium hydroxide to produce a deprotonated carboxylic acid-rich platform. Finally, due to a high density of accessible chelatant carboxylic acid groups, GHN-COO^- binds strongly a great amount of Pd²⁺ ions to form stable complexes which after reduction by NaBH₄ leads to highly dispersed, densely anchored, and uniformly distributed nanoscale Pd particles (d ∼ 4.5 nm) on the surface of the functionalized GHN. The GHN-COO^-@PdNPs nanohybrid proved to be highly efficient for dye reduction by NaBH₄ in aqueous solution at room temperature. Moreover, because of the high stability of the as-prepared graphene-like supported PdNPs, it exhibited very good reusability and could be recycled up to eight times without any significant loss in activity.

Magnetic chitosan stabilized palladium nanostructures: Potential catalysts for aqueous Suzuki coupling reactions

This work describes the preparation of palladium-based catalyst supported on magnetic chitosan (Pd@IO-Chitosan) for Suzuki Miyaura C-C coupling reaction. The Pd@IO-Chitosan catalyst was characterized using different spectroscopic and microscopic techniques such as Fourier transform infrared spectroscopy (FT-IR), transmission electron microscope (TEM), vibrating sample magnetometer (VSM), X-ray powder diffraction (XRD), X-ray Absorption Near Edge Structure (XANES) Spectroscopy and X-ray photoelectron spectroscopy (XPS). Pd@IO-Chitosan was further analysed by thermogravimetric analysis (TGA) in order to determine its thermal behavior. The catalyst comprised Pd, PdO species stabilised by chitosan that facilitated Suzuki coupling reactions. Palladium loading as low as 0.0055 mol% was found to be effective for aqueous Suzuki cross-couplings with excellent yields of over 99%. The catalyst could be recycled and reused at least 12 times with no significant decrease in its catalytic activity.

Eggshell membranes coated chitosan decorated with metal nanoparticles for the catalytic reduction of organic contaminates

This study focusses on the effect of chitosan coating with eggshell membranes for the reduction of different organic pollutants. Chickens eggs were collected from the local market and utilized to extract the enrich eggshell membranes (ESM). The chicken eggshell membranes are abundant waste material which is inexpensive and illustrates remarkable physiognomies for many possible applications. Fresh fibers/strips coated by chitosan (CS) were prepared by mixing the eggshell membranes with CS solution (2 wt%/v) in different proportions i.e., 10 %, 30 %, 50 %, 60 %, 70 %, 80 %, and 90 %. These strips were then templated with copper and iron metal nanoparticles by putting them in their metal ions aqueous solution to adsorb the metals ions and were then reduced to zero-valent metal nanoparticles (MNPS) by using NaBH₄ aqueous solution. These prepared materials (MNPS@ESM-CS) were characterized by using XRD, XPS, FE-SEM, and EDS to confirm the successful preparation of MNPs over the surface of ESM coated with CS. Afterwards, these prepared materials were investigated as a catalyst for the reduction of different organic pollutants, such as 4-nitroaniline (4-NA), 4-nitrophenol (4-NP) and methylene blue (MB) dye. The catalytic efficiency of ESM was enhanced 5.7-fold by adding only 20 % CS solution. It was observed that Cu@ESM-CS-80 % took 7 min for reduction of 4-NA, 6 min for 4-NP, and 7 min for MB dye. The reusability of the catalytic strip was also investigated for four cycles and found efficient and can be easily recovered by simply pulling it from the reaction mixture.

A Sustainable Palladium-Intercalated Montmorillonite Clay Catalytic System for Imine Hydrogenation under Mild Conditions

A series of palladium nanoparticles (Pd NPs) intercalated montmorillonite clay catalysts is reported for hydrogenation of 3-diphenyl prop-2-en-1-imine under mild reaction conditions. Pd/clay catalyst was prepared by a simple wet-impregnation method, and the physicochemical properties were characterized extensively by various techniques including N₂ adsorption, XRD, TEM, XPS and TPR etc., which showed the intercalation of active Pd NPs between the clay layers. The effect of reaction conditions such as catalyst loading, reaction time, temperature and H₂ pressure is explored, and thereby a plausible mechanism is proposed. The optimum amount of 6 wt % Pd/clay catalyst showed significant catalytic activity to yield 3-phenyl propyl aniline with 100 % conversion and selectivity under 5 bar pressure and a shorter reaction period of 3.5 h at 100 °C. The developed catalytic system unveiled excellent reusability over five cycles and hence paved the way for industrial applications.

Novel bio-inspired three-dimensional nanocomposites based on montmorillonite and chitosan

In this study, inspired by nacre-like structural natural shells, novel three-dimensional (3D) nanocomposites based on natural nanoplatelets of montmorillonite (MMT) and polysaccharide of chitosan (CS) were prepared with solution intercalation and self-assembly process. The CS-intercalated-MMT nanoplatelets units acted as "bricks" and CS molecules acted as "mortar", arranging in fairly well-ordered layered structure. With addition of glutaraldehyde (GA) and Pd²⁺ cations, synergistic toughening and strengthening effects of covalent and ionic bonds could be achieved. The best mechanical properties of the prepared 3D nanocomposites were observed as 5.6 KJ/m² (impact strength), 3.3 GPa (flexural modulus), and 65.8 MPa (flexural strength), respectively, which showed higher toughness but lower flexural properties than natural pearl mussel shells. Nevertheless, both the impact and flexural properties of the prepared 3D nanocomposite were much higher than the other natural shell, i.e. green grab shell. Besides conventional methods characterizations, the nacre-like structure of the artificial 3D nanocomposite was further evidenced with positron annihilation lifetime spectroscopy characterizations. This work might facilitate a versatile platform for developing green 3D bionanocomposites with fairly good mechanical properties.

Chitosan modified Ti-PILC supported PdOx catalysts for coupling reactions of aryl halides with terminal alkynes

Biopolymer of chitosan (CS) and titanium pillared clays (Ti-PILCs) have been combined in a hybrid as advanced supports for immobilization of PdOx=0,1 species to prepare novel PdOx=0,1@Ti-PILC/CS nano-composite catalysts. The Ti-PILC materials showed high specific surface areas and abundant meso-porous structure with many irregular pore channels caused by collapses of layered structure of clay during Ti pillaring process. Both CS chains and sub-nano sized PdOx particles were successfully incorporated into the pore channels of Ti-PILC, resulting in a decrease in both the specific surface areas and uniform distribution of pore size. Besides conventional methods characterizations, the strong interactions between PdOx species and Ti-PILC/CS support were further evidenced with positron annihilation lifetime spectroscopy studies. The resultant PdOx@Ti-PILC/CS catalyst was highly active for the coupling reactions of aryl halides with phenyl acetylenes. It was recyclable and gave excellent yield up to 13 runs with low leaching of Pd species.

Modification of Montmorillonite with Polyethylene Oxide and Its Use as Support for Pd0 Nanoparticle Catalysts

In this study, montmorillonite (MMT) was modified by intercalating polyethylene oxide (PEO) macromolecules between the interlayer spaces in an MMT-water suspension system. X-ray diffraction results revealed that the galleries of MMT were expanded significantly after intercalation of different loading of PEO. MMT/PEO 80/20 composite was chosen as the support platform for immobilization of Pd species in preparing novel heterogeneous catalysts. After immobilization of Pd species, the interlayer spacing of MMT/PEO (80/20) (1.52 nm) was further increased to 1.72 nm (Pd²⁺@MMT/PEO) and 1.73 nm (Pd⁰@MMT/PEO), confirming the well-immobilization of the Pd species in the interlayer spaces of PEO-modified MMT. High-resolution transmission electron microscopy (HR-TEM) observation results confirmed that Pd nanoparticles were confined inside the interlayer space of MMT and/or dispersed well on the outer surface of MMT. The conversion of Pd²⁺ to Pd⁰ species was evidenced by binding energy characterization with X-ray photo electron spectroscopy (XPS). The microstructure variation caused by the Pd immobilization was sensitively detected by positron annihilation lifetime spectroscopy (PALS) studies. The prepared Pd⁰@MMT/PEO (0.2/80/20) catalytic composite exhibits good thermal stability up to around 200 °C, and it showed high activities for Heck reactions between aryl iodides and butyl acrylates and could be recycled for five times. The correlations between the microstructure and properties of the Pd@MMT/PEO catalytic composites were discussed.

Recyclable Amphiphilic Metal Nanoparticle Colloid Enabled Atmospheric Oxidation of Alcohols

Developing amphiphilic colloid catalysts is essentially important for realizing environmentally benign biphasic catalysis under atmospheric conditions. Herein, a linear structured plant polyphenol was employed as an amphiphilic stabilizer for preparing a series of amphiphilic Pd nanoparticles (PdNPs) colloids. For the as-prepared PdNPs colloids, the phenolic hydroxyls of plant polyphenols were responsible for the stabilization of PdNPs, whereas the rigid aromatic scaffold of plant polyphenols effectively suppressed the PdNPs from aggregation by providing a high steric effect. Thanks to the coexistence of hydrophilic phenolic hydroxyls and hydrophobic aromatic rings, the plant polyphenols induced tunable amphiphilic properties into the PdNPs, allowing an easier wetting of PdNPs with the substrate molecules. By tuning the content of plant polyphenols in the colloid, the particle size (3.17-4.73 nm) and the dispersity of the PdNPs were facilely controlled. When applied for atmospheric oxidation of insoluble alcohols in water by air, the amphiphilic PdNPs preferentially absorbed the alcohol substrates to create a relatively high-substrate-concentration microenvironment, which improved the mass transfer in the biphasic catalysis, allowing the proceeding of low-temperature (50 °C) atmospheric oxidation of diverse alcohols with high catalytic conversion, including aliphatic alcohols, cyclic aliphatic alcohols, and aromatic alcohols. Furthermore, the amphiphilic PdNPs colloid also exhibited excellent reusability with a conversion yield high up to 97.96% in the fifth cycle. In contrast, the control catalysts of poly(vinylpyrrolidone)- and poly(ethylene glycol)-stabilized PdNPs were completely inactivated in the fifth cycle. As a consequence, our findings provided a new route for developing an environmentally benign aqueous colloid catalyst that is both highly active and recyclable for mild biphasic oxidation reaction systems.

Heterogeneous Catalytic Composites from Palladium Nanoparticles in Montmorillonite Intercalated with Poly (Vinyl Pyrrolidone) Chains

In this study, poly (vinyl pyrrolidone) (PVP) chains intercalated montmorillonite (MMT) matrices has been demonstrated as an excellent scaffolding material for the immobilization of palladium (Pd) nanoparticles to prepare efficient heterogeneous catalysts for Heck reactions. Multiple layers (up to four) of PVP chains can intercalate the interlayer space of the MMT, resulting in an increase therein from 1.25 to 3.22 nm. MMT/PVP with PVP loading (20%) was selected as the platform for the immobilization of Pd. The in-situ reduction of the chelated Pd²⁺ into Pd⁰ in the interlayer space of MMT/PVP composite could be easily achieved. For the prepared Pd@MMT/PVP catalytic composite, a unique maze-like microstructure of Pd nanoparticles tightly encaged by PVP chains and by lamellae of layered silica has been detected by high resolution transmission electron microscopy (HR-TEM) and X-ray diffraction (XRD). Furthermore, the microstructure is well elucidated in molecular level by positron annihilation lifetime analysis of the Pd@MMT/PVP catalytic composite. The prepared Pd@MMT/PVP catalysts were highly active for the Heck coupling reactions between aromatic halides and alkenes, and could be recycled 9 times without significant decreases in coupling yields. The excellent comprehensive catalytic performances of the Pd@MMT/PVP catalytic composites are mainly attributed to their unique maze-like microstructure.

Chitosan-titanium oxide fibers supported zero-valent nanoparticles: Highly efficient and easily retrievable catalyst for the removal of organic pollutants

Different chitosan-titanium oxide (CS-TiO₂-x, with x = TiO₂ loadings of 1, 5, 10,15 and 20 wt%) nanocomposite fibers were prepared and kept separately in each salt solution of CuSO₄, CoNO₃, AgNO₃ and NiSO₄ to adsorb Cu²⁺, Co²⁺, Ag⁺, and Ni⁺ ions, respectively. The metal ions loaded onto CS-TiO₂ fibers were reduced to their respective zero-valent metal nanoparticles (ZV-MNPs) like Cu⁰, Co⁰, Ag⁰ and Ni⁰ by treating with NaBH₄. The CS-TiO₂ fibers templated with various ZV-MNPs were characterized and investigated for their catalytic efficiency. Among all prepared ZV-MNPs, Cu⁰ nanoparticles templated on CS-TiO₂-15 fibers exhibited high catalytic efficiency for the reduction of dyes (methyl orange (MO), congo red (CR), methylene blue (MB) and acridine orange (AO)) and nitrophenols (4-nitrohphenol (4-NP), 2-nitrophenol (2-NP), 3-nitrophenol (3-NP) and 2,6-dinitrophenol (2,6-DNP)). Besides the good catalytic activities of Cu/CS-TiO₂-15 fibers, it could be easily recovered by simply pulling the fiber from the reaction medium.

Insightful understanding of the correlations of the microstructure and catalytic performances of Pd@chitosan membrane catalysts studied by positron annihilation spectroscopy

In this study, the catalytic performances of palladium supported on chitosan (Pd@CS) membrane heterogeneous catalysts have been studied from the aspects of free volume by positron annihilation lifetime spectroscopy (PALS). The results showed that the variation in free volume hole size of the Pd@CS membrane catalyst was closely associated with microstructure evolutions, such as increase of Pd content, valence transition of Pd by reduction treatment, solvent swelling, physical aging during catalyst recycling, and so on. The PALS results showed that both the mean free volume hole size of the Pd⁰@CS membrane in the dry or swollen state (analyzed by the LT program) and its distribution (analyzed by the MELT program) are smaller than the molecule size of the reactants and products in the catalysis reaction. However, the results showed that the Pd⁰@CS membrane catalyst has excellent catalytic activity for the Heck coupling reaction of all the reactants with different molecule size. It was revealed that the molecule transport channels of the Pd⁰@CS membrane catalyst in the reaction at high temperature was through a number of instantaneously connected free volume holes rather than a single free volume hole. This hypothesis was powerfully supported by the catalytic activity assessment results of the CS layer sealed Pd⁰@CS membrane catalyst. Meanwhile, it was confirmed that the leaching of Pd⁰ nanoparticles of the reused Pd⁰@CS membrane catalyst during the recycling process was also through such instantaneously connected free volume holes.

A number of instantaneously connected free volume holes act as mass transport channels of the Pd⁰@CS membrane catalyst in reactions.

Nanosheet Array-Like Palladium-Catalysts Pdx/rGO@CoAl-LDH via Lattice Atomic-Confined in Situ Reduction for Highly Efficient Heck Coupling Reaction

A series of novel nanosheet array-like catalysts Pd_x/rGO@CoAl-LDH (x = 0.0098-1.9, refers to Pd loading in wt % on ICP, rGO: reduced graphene oxide, LDH: layered double hydroxide) were first prepared via a simple and green lattice atomic-confined in situ reduction of oxidative Pd precursors by the evenly atomic-dispersed reductive Co²⁺ sites on LDH layers of a nanohybrid rGO@CoAl-LDH with hexagonal LDH nanoplates (∼73 × 7 nm) interdigitated vertical to the surfaces of rGO layer in both sides, fabricated through a simple citric acid-assisted aqueous-phase coprecipitation method. The as-obtained Pd catalysts possess clean Pd nanoclusters (NCs) with tunable sizes in 1.3-1.8 nm on varied Pd loadings. All the Pd_x/rGO@CoAl-LDH catalysts show excellent activities for the Heck reaction, and the Pd_0.0098/rGO@CoAl-LDH with the ultrafine Pd NCs of 1.3 ± 0.2 nm yields a maximum turnover frequency of 160 000 h^-1 over a heterogeneous catalyst so far. The excellent activities can be attributed to the ultrasmall Pd NCs with high dispersion and clean Pd surfaces, increased electron transfer capacity and surface area, and remarkable Pd-CoAl-LDH-rGO three-phase synergistic effect of the present unique nanosheet array-like Pd NCs catalysts. Moreover, the catalyst Pd_0.33/rGO@CoAl-LDH shows a broad range of substrate applicability and can be reused more than five runs without obvious loss of activity, giving the present catalysts long-term stability. These findings make the rGO@CoAl-LDH hybrid prepared by a facile and scalable synthesis route a universal green platform to support other noble or nonprecious metal NCs via lattice atomic-confined in situ reduction strategy to construct more desired heterogeneous catalysts.

Cellulose Sponge Supported Palladium Nanoparticles as Recyclable Cross-Coupling Catalysts

Robust and flexible cellulose sponges were prepared by dual-cross-linking cellulose nanofiber (CNF) with γ-glycidoxypropyltrimethoxysilane (GPTMS) and polydopamine (PDA) and used as carriers of metal nanoparticles (NPs), such as palladium (Pd). In situ growth of Pd NPs on the surface of CNF was achieved in the presence of polydopamine (PDA). The modified sponges were characterized with FT-IR, XRD, EDX, SEM, TEM, and TGA. XRD, EDX, and TEM results revealed that the Pd NPs were homogeneously dispersed on the surface of CNF with a narrow size distribution. The catalysts could be successfully applied to heterogeneous Suzuki and Heck cross-coupling reactions. Leaching of Pd was negligible and the catalysts could be conveniently separated from the products and reused.