Preparation of Transparent Bulk TiO2/PMMA Hybrids with Improved Refractive Indices via an in Situ Polymerization Process Using TiO2 Nanoparticles Bearing PMMA Chains Grown by Surface-Initiated Atom Transfer Radical Polymerization

Optically transparent and mechanically tough glass with impact resistance and flame retardancy enabled by covalent/supramolecular interactions

Exploring glass materials beyond inorganic components represents a new direction in the development of artificial transparent materials. Inspired by the successes of polymeric and supramolecular glasses, we shifted our attention to the preparation of a transparent glass through the polymerization of low-molecular-weight monomers that are naturally tailored with noncovalent recognition motifs. In this work, an imidazolium unit bearing a vinyl group and a tetrafluoroborate counter anion was selected to construct an artificial glass. Experimental and theoretical investigations revealed that the cross-linking behavior of anions effectively transformed linear polymeric chains into three-dimensional networks. The polymeric-supramolecular glass exhibits a tough tensile strength (61.31 MPa), high Young's modulus (1.17 GPa), and good optical transparency (>90%), which are comparable to those of polymethyl methacrylate. Moreover, the obtained glass maintains excellent mechanical toughness and optical transparency over a wide temperature range (from -150 to 150 °C). The material shows a superior impact resistance (18.34 kJ m-2) and flame retardancy (V0 rating), which are barely achieved by supramolecular materials.

Dealkylation of Poly(methyl methacrylate) by TiCl4 Vapor Phase Infiltration (VPI) and the Resulting Chemical and Thermophysical Properties of the Hybrid Material

This study examines the chemical reaction pathways for vapor phase infiltration (VPI) of TiCl4 into poly(methyl methacrylate) (PMMA). VPI is a processing method that transforms organic polymers into organic-inorganic hybrid materials with new properties of interest for microelectronic patterning, technical textiles, and chemical separations. Understanding the fundamental chemical mechanisms of the VPI process is essential for establishing approaches to design the chemical structure and properties of these hybrid materials. While prior work has suggested that TiCl4 infiltration into PMMA does not disrupt the polymer's carbonyl bond, a clear reaction mechanism has yet to be proposed. Here, we present a detailed X-ray photoelectron spectroscopy study that presents evidence for a concerted reaction mechanism that involves TiCl4 coordinating with the PMMA's ester group to dealkylate the methyl side group, creating a chloromethane byproduct and primary chemical bonds between the organic and inorganic components of the hybrid material. Additional spectroscopy, quartz crystal microbalance gravimetry, and thermophysical and chemical property measurements of this material, including solubility studies and thermal expansion measurements, provide further evidence for this chemical reaction pathway and the subsequent creation of inorganic cross-links that network these TiOx-PMMA hybrid materials.

Light Management of Metal Halide Scintillators for High-Resolution X-Ray Imaging

The ever-growing need to inspect matter with hyperfine structures requires a revolution in current scintillation detectors, and the innovation of scintillators is revived with luminescent metal halides entering the scene. Notably, for any scintillator, two fundamental issues arise: Which kind of material is suitable and in what form should the material exist? The answer to the former question involves the sequence of certain atoms into specific crystal structures that facilitate the conversion of X-ray into light, whereas the answer to the latter involves assembling these crystallites into particular material forms that can guide light propagation toward its corresponding pixel detector. Despite their equal importance, efforts are overwhelmingly devoted to improving the X-ray-to-light conversion, while the material-form-associated light propagation, which determines the optical signal collected for X-ray imaging, is largely overlooked. This perspective critically correlates the reported spatial resolution with the light-propagation behavior in each form of metal halides, combing the designing rules for their future development.

The Fabrication of High-Hardness and Transparent PMMA-Based Composites by an Interface Engineering Strategy

The high-hardness and transparent PMMA-based composites play a significant role in modern optical devices. However, a well-known paradox is that conventional PMMA-based composites with high loadings of nanoparticles usually possess high surface hardness at the cost of poor transparency and toughness due to the aggregation of nanoparticles. In this work, ideal optical materials (SiO2/PMMA composites) with high transparency and high surface hardness are successfully fabricated through the introduction of the flow modifier Si-DPF by conventional melt blending. Si-DPF with low surface energy and high transparency, which is located at the SiO2/PMMA interface, and nano-SiO2 particles are homogeneously dispersed in the PMMA matrix. As an example, the sample SiO2/PMMA/Si-DPF (30/65/5) shows outstanding transparency (>87.2% transmittance), high surface hardness (462.2 MPa), and notched impact strength (1.18 kJ/m2). Moreover, SiO2/PMMA/Si-DPF (30/65/5) also presents a low torque value of composite melt (21.7 N⋅m). This work paves a new possibility for the industrial preparation of polymer-based composites with excellent transparency, surface hardness, processability, and toughness.

Synthesis, Characterizations, and Thermochromic Properties of VO2 Particles Grafted with PSS : PEDOT

Vanadium dioxide (VO2) particles were modified by grafting with poly(styrene sulfonate) (PSS) and poly(3,4-ethylenedioxythiophene) (PEDOT) via surface-initiated atom transfer radical polymerization (SI-ATRP). Critical transition temperature ( $T_{\text{c}}$ ) of the modified VO2 ranging between 77 and 79°C was obtained. After mixing with acrylic-based emulsion, dispersion of the VO2 particles in the polymer matrix was significantly improved. The visible light transmittance through the composite films above 75% was maintained if a concentration of the modified VO2 particles loaded into acrylic polymer film was no greater than 1.0 wt%. The NIR transmittance through the acrylic/VO2@PSS : PEDOT also dropped by 9-10%, compared with that of the pure acrylic film (without any particles). Finally, glass substrates coated with the acrylic/VO2@PSS : PEDOT composite films could reduce the temperature inside a model house by 5-6°C, compared with that of the control system (pure acrylic coating film without VO2 particles). Overall, this work demonstrated that it was possible to improve the dispersion of VO2 particles in polymer films without sacrificing its NIR shielding ability by grafting the surface of VO2 particles with PSS : PEDOT chains, while providing the optimum grafting density and particle loading.

Preparation of double-layered nanosheets containing pH-responsive polymer networks in the interlayers and their conversion into single-layered nanosheets through the cleavage of cross-linking points

Double-layered nanosheets containing pH-cleavable polymer networks between two niobate layers were prepared by copolymerization of N-isopropylacrylamide and an acid-degradable crosslinker via surface-initiated atom transfer radical polymerization on the surface of hydrated interlayers (interlayer I) of K₄Nb₆O₁₇·3H₂O and subsequent exfoliation by the introduction of tetra-n-butylammonium (TBA) ions into anhydrous interlayers (interlayer II). Moreover, the double-layered nanosheets were converted into single-layered nanosheets by the cleavage of cross-linking points in polymer networks by lowering pH. Fourier transform infrared spectroscopy (FTIR) and thermogravimetry (TG) results showed that polymer networks were present, and nanosheets with a thickness of 10.8 ± 1.6 nm were observed by using an atomic force microscope (AFM) after exfoliation using TBA ions. The thickness of the nanosheets was decreased to 6.1 ± 0.9 nm by lowering the pH, and proton nuclear magnetic resonance (¹H NMR) and UV-vis spectroscopy showed that the degradation of the cross-linkers proceeded, suggesting that the cleavage of the cross-linking points led to the conversion of double-layered nanosheets into single-layered nanosheets.

Synthesis of Optically Tunable and Thermally Stable PMMA-PVA/CuO NPs Hybrid Nanocomposite Thin Films

We report the synthesis and comprehensive characterization of polymethylmethacrylate (PMMA)/polyvinylalcohol (PVA) polymeric blend doped with different concentrations of Copper oxide (CuO) nanoparticles (NPs). The PMMA-PVA/CuO nanocomposite hybrid thin films containing wt.% = 0%, 2%, 4%, 8%, and 16% of CuO NPs are deposited on glass substrates via dip-coating technique. Key optical parameters are measured, analyzed, and interpreted. Tauc, Urbach, Spitzer-Fan, and Drude models are employed to calculate the optical bandgap energy (E_g) and the optoelectronic parameters of PMMA-PVA/CuO nanocomposites. The refractive index and E_g of undoped PMMA-PVA are found to be (1.5-1.85) and 4.101 eV, respectively. Incorporation of specific concentrations of CuO NPs into PMMA-PVA blend leads to a considerable decrease in E_g and to an increase of the refractive index. Moreover, Fourier Transform Infrared Spectroscopy (FTIR) transmittance spectra are measured and analyzed for undoped and doped polymeric thin films to pinpoint the major vibrational modes in the spectral range (500 and 4000 cm^-1) as well as to elucidate the nature of chemical network bonding. Thermogravimetric analysis (TGA) is conducted under appropriate conditions to ensure the thermal stability of thin films. Doped polymeric thin films are found to be thermally stable below 105 °C. Therefore, controlled tuning of optoelectronic and thermal properties of doped polymeric thin films by introducing an appropriate concentration of inorganic fillers leads to a smart design of scaled multifunctional devices.

Recent Advances in the Synthesis of Polymer-Grafted Low-K and High-K Nanoparticles for Dielectric and Electronic Applications

The synthesis of polymer-grafted nanoparticles (PGNPs) or hairy nanoparticles (HNPs) by tethering of polymer chains to the surface of nanoparticles is an important technique to obtain nanostructured hybrid materials that have been widely used in the formulation of advanced polymer nanocomposites. Ceramic-based polymer nanocomposites integrate key attributes of polymer and ceramic nanomaterial to improve the dielectric properties such as breakdown strength, energy density and dielectric loss. This review describes the "grafting from" and "grafting to" approaches commonly adopted to graft polymer chains on NPs pertaining to nano-dielectrics. The article also covers various surface initiated controlled radical polymerization techniques, along with templated approaches for grafting of polymer chains onto SiO2, TiO2, BaTiO3, and Al2O3 nanomaterials. As a look towards applications, an outlook on high-performance polymer nanocomposite capacitors for the design of high energy density pulsed power thin-film capacitors is also presented.

Synthesis and Characterization of Polymeric (PMMA-PVA) Hybrid Thin Films Doped with TiO2 Nanoparticles Using Dip-Coating Technique

We report the synthesis of hybrid thin films based on Poly(MethylMethAcrylate) (PMMA) and Poly(VinylAlcohol) (PVA), doped with different concentrations of titanium dioxide nanoparticles (TiO2 NPs). As-prepared thin films of (PMMA-PVA) doped by TiO2 NPs (wt.% = 2%, 4%, 8%, and 16%) are deposited on glass substrate. Transmittance (T%), reflectance (R%), absorption coefficient (α), optical constants (n and k), and optical dielectric functions (ε1 and ε2) are deduced using the experimental transmittance and reflectance spectra. Furthermore, a combination of classical models such as Tauc, Urbach, Spitzer-Fan, and Drude models are applied to calculate the optical and optoelectronic parameters and the energy gaps of the prepared nanocomposite thin films. The optical bandgap energy of PMMA-PVA thin film is found to be 4.101 eV. Incorporation of TiO2 NPs into PMMA-PVA polymeric thin films leads to a decrease in the optical bandgap and thus bandgap engineering is possible. Fourier-transform infrared spectroscopy (FTIR) transmittance spectra of thin films are measured and interpreted to identify the vibrational modes. To elucidate the chemical stability, thermogravimetric (TGA) curves are measured. We found that (PMMA-PVA)/TiO2 NPs polymeric thin films are thermally stable below 110 °C enable them to be attractive for a wide range of optical and optoelectronic applications.

Structure and Optical Properties of Titania-PDMS Hybrid Nanocomposites Prepared by In Situ Non-Aqueous Synthesis

Organic-inorganic hybrid materials are attractive due to the combination of properties from the two distinct types of materials. In this work, transparent titania-polydimethylsiloxane hybrid materials with up to 15.5 vol. % TiO₂ content were prepared by an in situ non-aqueous method using titanium (IV) isopropoxide and hydroxy-terminated polydimethylsiloxane as precursors. Spectroscopy (Fourier transform infrared, Raman, Ultraviolet-visible, ellipsometry) and small-angle X-ray scattering analysis allowed to describe in detail the structure and the optical properties of the nanocomposites. Titanium alkoxide was successfully used as a cross-linker and titania-like nanodomains with an average size of approximately 4 nm were shown to form during the process. The resulting hybrid nanocomposites exhibit high transparency and tunable refractive index from 1.42 up to 1.56, depending on the titania content.