Niobium-Doped (001)-Dominated Anatase TiO2 Nanosheets as Photoelectrode for Efficient Dye-Sensitized Solar Cells

Facile Synthesis of a Multifunctional SnO2 Nanoparticles/Nanosheets Composite for Dye-Sensitized Solar Cells

Synthesizing SnO2 composite nanostructures via a facile one-step method has been proven to be a great challenge. By adjusting operating variables, such as the reaction solution's pH and solvent type, several SnO2 nanostructures, in particular, a function-matching SnO2 hybrid structure composed of irregular zero-dimensional nanoparticles (NPs) and two-dimensional nanosheets (NSs), could be created. The as-prepared SnO2 composites were then characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscope (SEM), and diffuse reflectance spectroscopy (DRS) to determine their physical properties. Dye-sensitized solar cells (DSCs) constructed with the resultant multifunctional SnO2 NPs/NSs composite exhibited the highest overall power conversion efficiency (PCE) of 5.16% among all products with a corresponding short-circuit current density of 18.6 mA/cm2 and an open-circuit voltage of 0.626 V. The improved performance can be attributed to the combined effects of each component in the composite, i.e., the intentionally introduced nanosheets provide desired electron transport and enhanced light scattering capability, while the nanoparticles retain their large surface area for efficient dye absorption.

Self-Seeding Synthesis of Hierarchically Branched Rutile TiO2 for High-Efficiency Dye-Sensitized Solar Cells

This study presents a unique and straightforward room temperature-based wet-chemical technique for the self-seeding preparation of three-dimensional (3D) hierarchically branched rutile TiO₂, abbreviated HTs, employing titanate nanotubes as the precursor. In the course of the synthesis, spindle-like rutile TiO₂ and the intermediate anatase phase were first obtained through a dissolution/precipitation/recrystallization process, with the former serving as the substrates and the latter as the nucleation precursor to growing the branches, which finally gave birth to the production of 3D HTs nanostructures. When the specifically created hierarchical TiO₂ was used as the photoanode in dye-sensitized solar cells (DSCs), a significantly improved power conversion efficiency (PCE) of 8.32% was achieved, outperforming a typical TiO₂ (P25) nanoparticle-based reference cell (η = 5.97%) under the same film thickness. The effective combination of robust light scattering, substantial dye loading, and fast electron transport for the HTs nanostructures is responsible for the remarkable performance.

MOF-derived Co2+-doped TiO2 nanoparticles as photoanodes for dye-sensitized solar cells

Facile synthesis and application of nano-sized semiconductor metal oxides for optoelectronic devices have always affected fabrication challenges since it involves multi-step synthesis processes. In this regard, semiconductor oxides derived directly from metal-organic frameworks (MOFs) routes have gained a great deal of scientific interest owing to their high specific surface area, regular and tunable pore structures. Exploring the application potential of these MOF-derived semiconductor oxides systems for clean energy conversion and storage devices is currently a hot topic of research. In this study, titanium-based MIL-125(Ti) MOFs were used as a precursor to synthesize cobalt-doped TiO2-based dye-sensitized solar cells (DSSCs) for the first time. The thermal decomposition of the MOF precursor under an air atmosphere at 400 °C resulted in mesoporous anatase-type TiO2 nanoparticles (NPs) of uniform morphology, large surface area with narrow pore distribution. The Co2+ doping in TiO2 leads to enhanced light absorption in the visible region. When used as photoanode in DSSCs, a good power conversion efficiency (PCE) of 6.86% with good photocurrent density (Jsc) of 13.96 mA cm-2 was obtained with the lowest recombination resistance and the longest electron lifetime, which is better than the performance of the pristine TiO2-based photoanode.

Manipulation of Electron Transfer between Pd and TiO2 for Improved Electrocatalytic Hydrogen Evolution Reaction Performance

The urgent need of catalysts with improved performances toward the hydrogen evolution reaction (HER) is still one of the crucial issues for the water splitting electrocatalysis. Herein, we exhibit that the HER activity of the Pd nanocubes could be improved by selecting the appropriately shaped titania nanocrystals as support. In particular, we used Pd nanoparticles with (100)-facet exposed to show that the HER performance of Pd cubes can be improved in both acidic and alkaline electrolyte media when combined on the anatase TiO₂ nanocrystals. Furthermore, we have also investigated the facet effect of TiO₂ on the performance in detail, which indicated stronger catalytic activity when (001)-TiO₂ was used rather than (mix 101/001)-TiO₂ and (101)-TiO₂. The electron-transfer-induced improvement of HER activity of Pd/TiO₂ was assessed by electron energy loss spectroscopy (EELS). Thereafter, the combined support materials with suitable facet exposed can give an additional adjusting path to regulate the HER activities of Pd nanocatalysts, which henceforth can further contribute to a novel way for tuning other catalysts with good electrocatalytic properties.

Recent Advancements in the Understanding of the Surface Chemistry in TiO2 Photocatalysis

Surface chemistry plays a major role in photocatalytic and photoelectrochemical processes taking place with the participation of TiO2. The synthesis methods, surface characterizations, theoretical research methods, and hardware over the last decade generated opportunities for progress in the surface science of this photocatalyst. Very recently, attention was paid to the design of photocatalysts at the nanoscale level by adjusting the types of exposed surfaces and their ratio, the composition and the surface structure of nanoparticles, and that of individual surfaces. The current theoretical methods provide highly detailed designs that can be embodied experimentally. The present review article describes the progress in the surface science of TiO2 and TiO2-based photocatalysts obtained over the last three years. Such aspects including the properties of macro- and nano-scale surfaces, noble-metal-loaded surfaces, doping with Mg and S, intrinsic defects (oxygen vacancies), adsorption, and photoreactions are considered. The main focus of the article is on the anatase phase of TiO2.

Effects of the Structure of TiO2 Nanotube Arrays on Its Catalytic Activity for Microbial Fuel Cell

To enhance the microbial fuel cell (MFC) for wastewater treatment and chemical oxygen demand degradation, TiO2 nanotubes arrays (TNA) are successfully synthesized on Ti foil substrate by the anodization process in HF and NH4F solution, respectively (hereafter, denoted as TNA-HF and TNA-NF). The differences between the two kinds of TNA are revealed based on their morphologies and spectroscopic characterizations. It should be highlighted that 3D TNA-NF with an appropriate dimension can make a positive contribution to the high photocatalytic activity. In comparison with the TNA-HF, the 3D TNA-NF sample exhibits a significant enhancement in current generation as the MFC anode. In particular, the TNA-NF performs nearly 1.23 times higher than the TNA-HF, and near twofold higher than the carbon felt. It is found that the two kinds of TiO2-based anodes have different conductivities and corrosion potentials, which are responsible for the difference in their current generation performances. Based on the experimental results, excellent stability, reliability, and low cost, TNA-NF can be considered a promising and scalable MFC bioanode material.

Dense Ge nanocrystals embedded in TiO2 with exponentially increased photoconduction by field effect

Si and Ge nanocrystals in oxides are of a large interest for photo-effect applications due to the fine-tuning of the optical bandgap by quantum confinement in nanocrystals. In this work, dense Ge nanocrystals suitable for enhanced photoconduction were fabricated from 60% Ge in TiO₂ amorphous layers by low temperature rapid thermal annealing at 550 °C. An exponential increase of the photocurrent with the applied voltage was observed in coplanar structure of Ge nanocrystals composite films deposited on oxidized Si wafers. The behaviour was explained by field effect control of the Fermi level at the Ge nanocrystals-TiO₂ layer/substrate interfaces. The blue-shift of the absorption gap from bulk Ge value to 1.14 eV was evidenced in both photocurrent spectra and optical reflection-transmission experiments, in good agreement with quantum confinement induced bandgap broadening in Ge nanocrystal with sizes of about 5 nm as found from HRTEM and XRD investigations. A nonmonotonic spectral dependence of the refractive index is associated to the Ge nanocrystals formation. The nanocrystal morphology is also in good agreement with the Coulomb gap hopping mechanism of T^-1/2 -type explaining the temperature dependence of the dark conduction.

Transparent Nb-doped TiO2 films with the [001] preferred orientation for efficient photocatalytic oxidation performance

[001]-Oriented Nb-TiO₂ films via topotactic transformation from [100]-oriented Nb-TiN exhibit efficient photoactivity due to highly-reactive-facet exposure and increased surface-reactive sites.