Enhanced Internal Quantum Efficiency in Dye-Sensitized Solar Cells: Effect of Long-Lived Charge-Separated State of Sensitizers

Effects of the Intramolecular Group and Solvent on Vibrational Coupling Modes and Strengths of Fermi Resonances in Aryl Azides: A DFT Study of 4-Azidotoluene and 4-Azido-N-phenylmaleimide

The high transition dipole strength of the azide asymmetric stretch makes aryl azides good candidates as vibrational probes (VPs). However, aryl azides have complex absorption profiles due to Fermi resonances (FRs). Understanding the origin and the vibrational modes involved in FRs of aryl azides is critically important toward developing them as VPs for studies of protein structures and structural changes in response to their surroundings. As such, we studied vibrational couplings in 4-azidotoluene and 4-azido-N-phenylmaleimide in two solvents, N,N-dimethylacetamide and tetrahydrofuran, to explore the origin and the effects of intramolecular group and solvent on the FRs of aryl azides using density functional theory (DFT) calculations with the B3LYP functional and seven basis sets, 6-31G(d,p), 6-31+G(d,p), 6-31++G(d,p), 6-311G(d,p), 6-311+G(d,p), 6-311++G(d,p), and 6-311++G(df,pd). Two combination bands consisting of the azide symmetric stretch and another mode form strong FRs with the azide asymmetric stretch for both molecules. The FR profile was altered by replacing the methyl group with maleimide. Solvents change the relative peak position and intensity more significantly for 4-azido-N-phenylmaleimide, which makes it a more sensitive VP. Furthermore, the DFT results indicate that a comparison among the results from different basis sets can be used as a means to predict more reliable vibrational spectra.

Theoretical investigation on the functional group modulation of UV-Vis absorption profiles of triphenylamine derivatives

Understanding the functional group modulation of electronic structure and excitation is pivotal to the design of organic small molecules (OSMs) for photoelectric applications. In this study, we employed density functional theory (DFT) and time-dependent DFT (TDDFT) calculations to explore the unique absorption character of four triphenylamine photosensitizers. The various conformations were investigated given the multiple single bonds in the compounds, and the resemblance in the electronic structure of different conformations is affirmed because the coplanarity and consequent long-range conjugation is maintained regardless of the orientation of the flexible blocks. Six functionals were evaluated, and MN15 was found to successfully reproduce the intense secondary absorption peak for the double 3,4-ethylenedioxythiophene (EDOT) modified sensitizer over B3LYP, PBE0, M062X, CAM-B3LYP, and ωB97XD. The introduction of EDOT gives rise to a new excited state S4, which is a local excitation constrained in the EDOT substituent triphenylamine block. This new excited state S4, in combination with inherent S2 and S3 derived from prototype molecule TPA-Pyc, jointly contributes to the hump of the secondary absorption peak of ETE-Pyc and finally affects the light-harvesting ability of the dye-sensitized TiO2 photoanode. The current findings provide guidance toward the rational design of OSMs with good light-harvest ability.

Tuning Photophysical Properties via Positional Isomerization of the Pyridine Ring in Donor-Acceptor-Structured Aggregation-Induced Emission Luminogens Based on Phenylmethylene Pyridineacetonitrile Derivatives

A series of aggregation-induced emission (AIE)-featured phenylmethylene pyridineacetonitrile derivatives named o-DBCNPy ((Z)-3-(4-(di-p-tolylamino)phenyl)-2-(pyridin-2-yl)acrylonitrile), m-DBCNPy ((Z)-3-(4-(di-p-tolylamino)phenyl)-2-(pyridin-3-yl)acrylonitrile), and p-DBCNPy ((Z)-3-(4-(di-p-tolylamino)phenyl)-2-(pyridin-4-yl)acrylonitrile) have been synthesized by tuning the substitution position of the pyridine ring. The linkage manner of the pyridine ring had influences on the molecular configuration and conjugation, thus leading to different photophysical properties. The absorption and fluorescence emission peak showed a bathochromic shift when the linking position of the pyridine ring changed from the meta to the ortho and para position. Meanwhile, o-DBCNPy exhibited the highest fluorescence quantum yield of 0.81 and the longest fluorescence lifetime of 7.96 ns as a neat film among all three isomers. Moreover, non-doped organic light-emitting diodes (OLEDs) were assembled in which the molecules acted as the light-emitting layer. Due to the relatively prominent emission properties, the electroluminescence (EL) performance of the o-DBCNPy-based OLED was superior to those of the devices based on the other two isomers with an external quantum efficiency (EQE) of 4.31%. The results indicate that delicate molecular modulation of AIE molecules could endow them with improved photophysical properties, making them potential candidates for organic photoelectronic devices.

Spectral properties and photophysical processes of meso styryl substituent triphenylamine-porphyrin derivatives

This work reports the synthesis and spectral properties of meso-styryl substituted triphenylamine-porphyrin derivatives, mP-BLP, mPPC-BLP and their metal coordinated complexes. The photophysical processes were analyzed and related to the meso-groups and centre metal ions. The meso styryl substituent in mP-BLP and its complexes are able to extend the conjugation of porphyrin macrocycle to the styryl motif, increase light harvesting ability and accelerate intersystem crossing (ISC) process. A large dihedral angle between the meso-styryl group and porphyrin macrocycle would prohibit the delocalization of electrons between the two motifs and induce the occurrence of solvation decay process. Increasing the electron-withdrawing ability of meso-substituent via additional pyrimidine group could promote the photoinduced intramolecular electron transfer (PIET) process for mPPC-BLP. Moreover, the coordination of metal ions would significantly accelerate the photophysical processes of both mP-BLP and mPPC-BLP. Specially, the Mg[Formula: see text] is helpful to the ISC process whereas Zn[Formula: see text] is adverse to the ISC process, while Cu[Formula: see text] would boost the non-radiation process. Furthermore, Zn[Formula: see text] is able to promote the PIET process of mPPC-BLP, exhibiting the highest charge-separated tendency among these porphyrins. mPPC-ZnBLP-based dye-sensitized solar cell (DSSC) devices show the highest power conversion efficiency (PCE). The photovoltaic performance of DSSC devices reveals the significancy of the photoinduced charge-separated tendency for the design of porphyrin sensitizers.

Photoinduced charge-separated molecular probe for ultrasensitive spectrum analysis and rapid colorimetric detection of platinum ions

Increased utilization of platinum ions in chemicals and drugs escalates environmental pollution and toxicity associated with Pt ions. However, current analysis and detection strategies of Pt ions display limited sensitivity due to the similar inert metal nature of platinum to gold. Herein, a photoinduced charge-separated molecule (MTPA)₂Ab was synthesized as a probe for enhanced sensitive selection of Pt ions. Long-lived charge-separated states generated upon exposure to 365 nm light lead to a stable complex between (MTPA)₂Ab and PtCl₂/PtCl₄ with highly-selectivity via sequential photoinduced electron transfers. Owing to the linear relationship of complex characteristic absorption and fluorescence emission intensities to Pt²⁺/Pt⁴⁺ concentrations, ultrasensitive spectrum analysis of Pt ions is achieved with a detection limit of 14.2 nM (2.8 ppb) for Pt²⁺ and 12.6 nM (2.5 ppb) for Pt⁴⁺ by an absorption spectrometer and 9.8 nM (1.9 ppb) for Pt ions (Pt²⁺/Pt⁴⁺) by a fluorescence spectrometer, far less than the reported values. Furthermore, a portable test box is developed based on (MTPA)₂Ab test strips due to distinguishable color change with Pt²⁺/Pt⁴⁺ concentrations for rapid colorimetric detection of Pt ions. The results highlight the promise of photoinduced charge-separated molecular probe in ultrasensitive and rapid detection of Pt ions to overcome current limitations of detection strategies.

Cause, Regulation and Utilization of Dye Aggregation in Dye-Sensitized Solar Cells

As an important member of third generation solar cell, dye-sensitized solar cells (DSSCs) have the advantages of being low cost, having an easy fabrication process, utilizing rich raw materials and a high-power conversion efficiency (PCE), prompting nearly three decades as a research hotspot. Recently, increasing the photoelectric conversion efficiency of DSSCs has proven troublesome. Sensitizers, as the most important part, are no longer limited to molecular engineering, and the regulation of dye aggregation has become a widely held concern, especially in liquid DSSCs. This review first presents the operational mechanism of liquid and solid-state dye-sensitized solar cells, including the influencing factors of various parameters on device efficiency. Secondly, the mechanism of dye aggregation was explained by molecular exciton theory, and the influence of various factors on dye aggregation was summarized. We focused on a review of several methods for regulating dye aggregation in liquid and solid-state dye-sensitized solar cells, and the advantages and disadvantages of these methods were analyzed. In addition, the important application of quantum computational chemistry in the study of dye aggregation was introduced. Finally, an outlook was proposed that utilizing the advantages of dye aggregation by combining molecular engineering with dye aggregation regulation is a research direction to improve the performance of liquid DSSCs in the future. For solid-state dye-sensitized solar cells (ssDSSCs), the effects of solid electrolytes also need to be taken into account.

Performance enhancement of a dye-sensitized solar cell by peripheral aromatic and heteroaromatic functionalization in di-branched organic sensitizers

Suppression of back reaction and enhanced photoinduced intramolecular electron transfer through peripheral functionalization of triphenylamino based dibranched donor–acceptor dyes.