Amine-Reactive Azlactone-Containing Nanofibers for the Immobilization and Patterning of New Functionality on Nanofiber-Based Scaffolds

Transferrable Electrospinning Nanofiber Meshes as Strongly Adhered Scaffolds for Slippery Liquid-Infused Porous Surfaces

Slippery liquid-infused porous surfaces (SLIPS) are self-healing protective coatings that can be made by infiltration of a porous scaffold with a chemically resistant oil. A popular method to apply a SLIPS coating is using electrospinning to deposit a nanofiber mesh onto the intended substrate. However, electrospinning only lightly deposits the nanofibers onto the intended substrate, so the coating detaches easily even when unintended. We report a simple, yet effective, solution to the adhesion problem. Electrospun nanofiber meshes are typically well entangled and cohesive, so they can be detached from the electrospinning target and transferred onto the final target. Using a thin layer of adhesive on the intended surface, the electrospinning mesh can be securely attached and infiltrated with protective oil to yield a more stable SLIPS coating. An adhered coating can be submerged under corrosive solution and repeatedly self-heal from damage to the same spot. With the electrospun nanofiber meshes' flexibility and stretchability, the meshes can be fitted around a wide range of targets including ones that are otherwise difficult to apply a nanofiber mesh on. The use of an adhesive interlayer between the nanofiber mesh and substrate is a simple solution to improve coating stability, and the solution facilitates application of SLIPS onto a broader range of substrates.

Identification of Critical Surface Parameters Driving Lectin-Mediated Capture of Bacteria from Solution

Lectin-functional interfaces are useful for isolation of bacteria from solution because they are low-cost and allow nondestructive, reversible capture. This study provides a systematic investigation of physical and chemical surface parameters that influence bacteria capture over lectin-functionalized polymer interfaces and then applies these findings to construct surfaces with significantly enhanced bacteria capture. The designer block copolymer poly(glycidyl methacrylate)- block-poly(vinyldimethyl azlactone) was used as a lectin attachment layer, and lectin coupling into the polymer film through azlactone-lectin coupling reactions was first characterized. Here, experimental parameters including polymer areal chain density, lectin molecular weight, and lectin coupling buffer were systematically varied to identify parameters driving highest azlactone conversions and corresponding lectin surface densities. To introduce physical nanostructures into the attachment layer, nanopillar arrays (NPAs) of varied heights (300 and 2100 nm) were then used to provide an underlying surface template for the functional polymer layer. Capture of Escherichia coli on lectin-polymer surfaces coated over both flat and NPA surfaces was then investigated. For flat polymer interfaces, bacteria were detected on the surface after incubation at a solution concentration of 10³ cfu/mL, and a corresponding detection limit of 1.7 × 10³ cfu/mL was quantified. This detection limit was 1 order of magnitude lower than control lectin surfaces functionalized with standard, carbodiimide coupling chemistry. NPA surfaces containing 300 nm tall pillars further improved the detection limit to 2.1 × 10² cfu/mL, but also reduced the viability of captured cells. Finally, to investigate the impact of cell surface parameters on capture, we used Agrobacterium tumefaciens cells genetically modified to allow manipulation of exopolysaccharide adhesin production levels. Statistical analysis of surface capture levels revealed that lectin surface density was the primary factor driving capture, as opposed to exopolysaccharide adhesin expression. These findings emphasize the critical importance of the synthetic interface and the development of surfaces that combine high lectin densities with tailored physical features to drive high levels of capture. These insights will aid in design of biofunctional interfaces with physicochemical surface properties favorable for capture and isolation of bacteria cells from solutions.

Fabricating Reactive Surfaces with Brush-like and Crosslinked Films of Azlactone-Functionalized Block Co-Polymers

In this paper, fabrication methods that generate novel surfaces using the azlactone-based block co-polymer, poly (glycidyl methacrylate)-block-poly (vinyl dimethyl azlactone) (PGMA-b-PVDMA), are presented. Due to the high reactivity of azlactone groups towards amine, thiol, and hydroxyl groups, PGMA-b-PVDMA surfaces can be modified with secondary molecules to create chemically or biologically functionalized interfaces for a variety of applications. Previous reports of patterned PGMA-b-PVDMA interfaces have used traditional top-down patterning techniques that generate non-uniform films and poorly controlled background chemistries. Here, we describe customized patterning techniques that enable precise deposition of highly uniform PGMA-b-PVDMA films in backgrounds that are chemically inert or that have biomolecule-repellent properties. Importantly, these methods are designed to deposit PGMA-b-PVDMA films in a manner that completely preserves azlactone functionality through each processing step. Patterned films show well-controlled thicknesses that correspond to polymer brushes (~90 nm) or to highly crosslinked structures (~1-10 μm). Brush patterns are generated using either the parylene lift-off or interface directed assembly methods described and are useful for precise modulation of overall chemical surface reactivity by adjusting either the PGMA-b-PVDMA pattern density or the length of the VDMA block. In contrast, the thick, crosslinked PGMA-b-PVDMA patterns are obtained using a customized micro-contact printing technique and offer the benefit of higher loading or capture of secondary material due to higher surface area to volume ratios. Detailed experimental steps, critical film characterizations, and trouble-shooting guides for each fabrication method are discussed.

Synergistic Effects of Electrical Stimulation and Aligned Nanofibrous Microenvironment on Growth Behavior of Mesenchymal Stem Cells

Incontrollable cellular growth behavior is a significant issue, which severely affects the functional tissue formation and cellular protein expression. Development of natural extracellular matrix (ECM) like biomaterials to present microenvironment cues for regulation of cell responses can effectively overcome this problem. The external simulation and topological characteristics as typical guiding cues are capable of providing diverse influences on cellular growth. Herein, we fabricated two-dimensional aligned conductive nanofibers (2D-ACNFs) by an electrospinning process and surface polymerization, and the obtained 2D-ACNFs provided the effects of both alignment and electrical stimulation (ES) on cellular response of human mesenchymal cells (hMSCs). The results of cellular responses implied that the obtained 2D-ACNFs could offer a synergistic effect of both ES and aligned nanopattern on hMSC growth behavior. The effects could not only promote hMSCs to contact each other and maintain cellular activity but also provide positive promotion to regulate cellular proliferation. Thus, we believe that the obtained 2D-ACNFs will have a broad application in the biomedical field, such as cell culture with ES, directional induction for cell growth, and damaged tissue repair, etc.