Zinc Ion Coordinated Poly(Ionic Liquid) Antimicrobial Membranes for Wound Healing

A novel biological antibacterial polyvinyl alcohol/polyionic liquid hydrogel for wound dressing

The release of antibiotics or anions by traditional bacteriostatic agents led to the development of bacterial drug resistance and environmental pollution. Ionic liquids (ILs) have become important choices for antibacterial agents because of their excellent physical, chemical and biological properties. In this paper, the bioactivities of 1-vinyl-3-butylimidazolium chloride ([VBIM]Cl, IL) and poly (1-vinyl-3-butylimidazolium chloride) (P[VBIM]Cl, PIL) were evaluated, and the potential antibacterial material was used to synthesize hydrogels. Using the colony formation assay and the Oxford cup method, antibacterial effect of IL and PIL were tested. Cell-Counting-Kit-8 (CCK-8) experiments were used to study the IC50 (half maximal inhibitory concentration) values of IL and showed 1.47 mg/mL, 0.35 mg/mL and 0.33 mg/mL at 24 h, 48 h and 72 h, respectively. The IC50 value of PIL were 12.15 μg/mL, 12.06 μg/mL and 11.76 μg/mL at 24 h, 48 h and 72 h, respectively. The PIL is further crosslinked with polyvinyl alcohol (PVA) to form a novel hydrogel through freeze-thaw cycles. The newly fabricated hydrogel exhibited a high water content, excellent water absorption properties and outstanding mechanical performance. Using the colony formation assay and the inhibition zone assay, the hydrogels exhibited favorable antibacterial effects (against E.coli and S.aureus) such that nearly 100% of the bacteria were killed in liquid medium while cultivating with H4 (synthesized by 0.5 g PIL and 1g PVA). In addition, the cytotoxicity of PIL was significantly reduced through hydrogen bond crosslinking. H4 showed the highest antibacterial activity and a good biocompatibility. The results indicated that the PVA&PIL hydrogels had great potential for wound dressing.

Antibacterial polyurethane foams with quaternized-chitosan as a chain extender for nasal packing and hemostasis

Endoscopic surgery is an effective and common clinical practice for chronic sinusitis. Nasal packing materials are applied in nasal surgery to prevent hemorrhage and promote wound healing. In this study, a degradable polyurethane foam dressing is successfully developed as a promising nasal packing material with good biocompatibility and antibacterial capability. Specifically, quaternized chitosan (QCS) serves as the crosslinker instead of polyols to offer polyurethane foam (PUF-QCS) antibacterial capability. The PUF-QCS2.0 % (with 2.0 wt% QCS) exhibits satisfactory liquid absorption capacity (19.4 g/g), high compressive strengths at both wet (14.5 kPa) and dry states (7.7 kPa), and a good degradation rate (8.3 %) within 7 days. Meanwhile, PUF-QCS2.0 % retains long-term antibacterial activity for 7 days and kills 97.3 % of S. aureus and 91.8 % of E. coli within 6 hours in antibacterial testing. Furthermore, PUF-QCS2.0 % demonstrates a positive hemostatic response in the rabbit nasal septum mucosa trauma model by reducing hemostatic time over 50.0 % and decreasing blood loss up to 76.1 % compared to the commercial PVA nasal packing sponge. Importantly, PUF-QCS also exhibits a significant antibacterial activity in nasal cavity. This nasal packing material has advantages in post-surgery bleeding control and infection prevention. STATEMENT OF SIGNIFICANCE: The performance of a nasal packing sponge requires good mechanical properties, fast and high liquid absorption rate, effective degradability and strong antibacterial activity. These features are helpful for improving the postoperative recovery and patient healing. However, integrating these into a single polyurethane foam is a challenge. In this study, quaternized chitosan (QCS) is synthesized and used as a chain extender and antibacterial agent in preparing a degradable polyurethane foam (PUF-QCS) dressing. PUF-QCS undergoes partial degradation and exhibits effective broad-spectrum antibacterial activity in 7 days. The reduction of postoperative bleeding and infection observed in the animal experiment further demonstrates that the PUF-QCS developed here outperforms the existing commercial nasal packing materials.

Bioactive glass 1393 promotes angiogenesis and accelerates wound healing through ROS/P53/MMP9 signaling pathway

Compared to bioactive glass 45S5, bioactive glass 1393 has shown greater potential in activating tissue cells and promoting angiogenesis for bone repair. Nevertheless, the effect of bioactive glass 1393 in the context of wound healing remains extensively unexplored, and its mechanism in wound healing remains unclear. Considering that angiogenesis is a critical stage in wound healing, we hypothesize that bioactive glass 1393 may facilitate wound healing through the stimulation of angiogenesis. To validate this hypothesis and further explore the mechanisms underlying its pro-angiogenic effects, we investigated the impact of bioactive glass 1393 on wound healing angiogenesis through both in vivo and in vitro studies. The research demonstrated that bioactive glass 1393 accelerated wound healing by promoting the formation of granulation, deposition of collagen, and angiogenesis. The results of Western blot analysis and immunofluorescence staining revealed that bioactive glass 1393 up-regulated the expression of angiogenesis-related factors. Additionally, bioactive glass 1393 inhibited the expression of ROS and P53 to promote angiogenesis. Furthermore, bioactive glass 1393 stimulated angiogenesis through the P53 signaling pathway, as evidenced by P53 activation assays. Collectively, these findings indicate that bioactive glass 1393 accelerates wound healing by promoting angiogenesis via the ROS/P53/MMP9 signaling pathway.

Preparation, biological activity and antibacterial properties of tantalum surface-doped Ca2+/Zn2+nanorods

In this research, we utilize porous tantalum, known for its outstanding elastic modulus and biological properties, as a base material in biomedical applications. The human skeletal system is rich in elements like Ca and Zn. The role of Zn is crucial for achieving a spectrum of sterilizing effects, while Ca is known to effectively enhance cell differentiation and boost cellular activity. The focus of this study is the modification of porous tantalum using a hydrothermal method to synthesize Ca2+/Zn2+-doped Ta2O5nanorods. These nanorods are subjected to extensive characterization techniques to confirm their structure and composition. Additionally, their biological performance is evaluated through a range of tests, including antibacterial assessments, MTT assays, and bacteria/cell scanning electron microscopy (SEM) analyses. The objective is to determine the most effective method of surface modification for porous tantalum, thereby laying a foundational theoretical framework for its surface enhancement.

In Vitro Antibacterial and Anti-Inflammatory Properties of Imidazolium Poly(ionic liquids) Microspheres Loaded in GelMA-PEG Hydrogels

Repairing damaged tissue caused by bacterial infection poses a significant challenge. Traditional antibacterial hydrogels typically incorporate various components such as metal antimicrobials, inorganic antimicrobials, organic antimicrobials, and more. However, drawbacks such as the emergence of multi-drug resistance to antibiotics, the low antibacterial efficacy of natural agents, and the potential cytotoxicity associated with metal antibacterial nanoparticles in hydrogels hindered their broader clinical application. In this study, we successfully developed imidazolium poly(ionic liquids) (PILs) polymer microspheres (APMs) through emulsion polymerization. These APMs exhibited notable antibacterial effectiveness and demonstrated minimal cell toxicity. Subsequently, we integrated the APMs into a gelatin methacryloyl (GelMA)-polyethylene glycol (PEG) hydrogel. This composite hydrogel not only showcased strong antibacterial and anti-inflammatory properties but also facilitated the migration of human skin fibroblasts (HSF) and human umbilical vein endothelial cells (HUVECs) and promoted osteogenic differentiation in vitro.

Design of Highly Selective Zn-Coordinated Polyampholyte for Cancer Treatment and Inhibition of Tumor Metastasis

Developing anticancer agents with negligible cytotoxicity against normal cells while mitigating multidrug resistance and metastasis is challenging. Previously reported cationic polymers have effectively eradicated cancers but are clinically unsuitable due to their limited selectivity. Herein, a series of poly(l-lysine)- and nicotinic acid-based polymers were synthesized using varying amounts of dodecylsuccinic anhydride. Zn-coordinating polymers concealed their cationic charge and enhanced selectivity. These Zn-bound polymers were highly effective against liver and colon cancer cells (HepG2 and Colon 26, respectively) and prevented cancer cell migration. They also displayed potent anticancer activity against drug-resistant cell lines (COR-L23/R): their cationic structure facilitated cancer cell membrane disruption. Compared to these polymers, doxorubicin was less selective and less efficacious against drug-resistant cell lines and was unable to prevent cell migration. These polymers are potential cancer treatment agents, offering a promising solution for mitigating drug resistance and tumor metastasis and representing a novel approach to designing cancer therapeutics.

Design and synthesis of silver nanoparticle anchored poly(ionic liquid)s mesoporous for controlled anticancer drug delivery with antimicrobial effect

Owing to the importance of drug delivery, the synthesis of advanced nanomaterials for targeted drug delivery plays a considerable role in medical treatment. One of the most prominent nanomaterials is PIL, which is used as controlled anticancer drug delivery and significantly improves the half-life and antitumor effect. In this study, a stable and effective drug carrier containing silver nanoparticles was reported for the drug delivery with an antimicrobial effect, and the capability of the drug carrier . PILP was synthesized by radical polymerization, and silver nanoparticles were anchored into PIL voids by in-situ reduction, which developed the adsorption antimicrobial effect and capability of the drug carrier. The synthesized nanocomposite was characterized. The Ag-PILP nanocomposite showed antibacterial activityagainst both E. coli and S. aureus with a MIC of 256 μg/mL, and bactericidal activity against E. coli and S. aureus strains with a MBC of 256 and 512 μg/mL, respectively.

Electropolymerization of Pyrrole-Tailed Imidazolium Ionic Liquid for the Elaboration of Antibacterial Surfaces

A strategy was developed to prepare antibacterial surfaces by electropolymerization of a pyrrole-functionalized imidazolium ionic liquid bearing an halometallate anion. The objective was to combine the antibacterial efficiency of polypyrrole (PPy) with those of the ionic liquid's components (cation and anion). For this, N-(1-methyl-3-octylimidazolium)pyrrole bromide monomer [PyC₈MIm]Br was synthesized and coordinated to ZnCl₂ affording [PyC₈MIm]Br-ZnCl₂. The antibacterial properties of [PyC₈MIm]Br-ZnCl₂ monomer were evaluated against Escherichia coli and Staphylococcus aureus by measurement of the minimum inhibitory concentration (MIC) values. This monomer presents higher activity against S. aureus (MIC = 0.098 μmol·mL^-1) than against E. coli (MIC = 2.10 μmol·mL^-1). Mixtures of pyrrole and the pyrrole-functionalized ionic liquid [PyC₈MIm]Br-ZnCl₂ were then used for the electrodeposition of PPy films on Fluorine-doped tin oxide (FTO) substrates. The concentration of pyrrole was fixed to 50 mM, while the concentration of [PyC₈MIm]Br-ZnCl₂ was varied from 5 to 100 mM. The efficient incorporation of the imidazolium cation and zinc halometallate anion into the films was confirmed by X-ray photoelectron spectroscopy (XPS) measurements. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) measurements confirmed the homogeneity of the different films with structures that depend on the [PyC₈MIm]Br-ZnCl₂ concentration. The films' thickness determined by profilometry varies only slightly with the [PyC₈MIm]Br-ZnCl₂ concentration from 7.4 μm at 5 mM to 8.9 μM at 100 mM. The films become more hydrophilic with an increase of [PyC₈MIm]Br-ZnCl₂ concentration with water contact angles varying from 47° at the lowest concentration to 32° at the highest concentration. The antibacterial activities of the different PPy films were determined both by the halo inhibition method and by the colony forming units (CFUs) counting method over time against Gram-positive S. aureus and Gram-negative E. coli bacteria. Films obtained by incorporation of [PyC₈MIm]Br-ZnCl₂ showed excellent antibacterial properties, at least two times higher than those of neat PPy, validating our strategy. Furthermore, a comparison of the antibacterial properties of the films obtained using the same [PyC₈MIm]Br-ZnCl₂ concentration (50 mM) evidenced much better activity against Gram-positive (no bacterial survival within 5 min) than against Gram-negative bacteria (no bacterial survival within 3 h). Finally, the antibacterial performances over time could be tuned by the concentration of the employed pyrrole-functionalized ionic liquid monomer. Against E. coli, using 100 mM of [PyC₈MIm]Br-ZnCl₂, the bacteria were totally killed within a few minutes, using 50 mM, they were killed after 2 h while using 10 mM, about 20% of bacteria survived even after 6 h.

Immunomodulatory zinc-based materials for tissue regeneration

Zinc(Zn)-based materials have contributed greatly to the rapid advancements in tissue engineering. The qualities they possess that make them so beneficial include their excellent biodegradability, biocompatibility, anti-bacterial activity, among and several others. Biomedical materials that act as a foreign body, will inevitably cause host immune response when introduced to the human body. As the osteoimmunology develops, the immunomodulatory characteristics of biomaterials have become an appealing concept to improve implant-tissue interaction and tissue restoration. Recently, Zn-based materials have also displayed immunomodulatory functions, especially macrophage polarization states. It can promote the transformation of M1 macrophages into M2 macrophages to enhance the tissue regeneration and reconstruction. This review covers mainly Zn-based materials and their characteristics, including metallic Zn alloys and Zn ceramics. We highlight the current advancements in the type of immune responses, as well as the mechanisms, that are induced by Zn-based biomaterials, most importantly the regulation of innate immunity and the mechanism of promoting tissue regeneration. To this end, we discuss their applications in biomedicine, and conclude with an outlook on future research challenges.

Ionogels: recent advances in design, material properties and emerging biomedical applications

Ionic liquid (IL)-based gels (ionogels) have received considerable attention due to their unique advantages in ionic conductivity and their biphasic liquid-solid phase property. In ionogels, the negligibly volatile ionic liquid is retained in the interconnected 3D pore structure. On the basis of these physical features as well as the chemical properties of well-chosen ILs, there is emerging interest in the anti-bacterial and biocompatibility aspects. In this review, the recent achievements of ionogels for biomedical applications are summarized and discussed. Following a brief introduction of the various types of ILs and their key physicochemical and biological properties, the design strategies and fabrication methods of ionogels are presented by means of different confining networks. These sophisticated ionogels with diverse functions, aimed at biomedical applications, are further classified into several active domains, including wearable strain sensors, therapeutic delivery systems, wound healing and biochemical detections. Finally, the challenges and possible strategies for the design of future ionogels by integrating materials science with a biological interface are proposed.

Deployment of a Novel Organic Acid Compound Disinfectant against Common Foodborne Pathogens

BACKGROUND

The disinfection process represents an important activity closely linked to the removal of micro-organisms in common processing systems. Traditional disinfectants are often not sufficient to avoid the spread of food pathogens; therefore, innovative strategies for decontamination are crucial to countering microbial transmission. This study aims to assess the antimicrobial efficiency of tetrapotassium iminodisuccinic acid salt (IDSK) against the most common pathogens present on surfaces, especially in food-borne environments.

METHODS

IDSK was synthesized from maleic anhydride and characterized through nuclear magnetic resonance (NMR) spectroscopy (both ¹H-NMR and ¹³C-NMR), thermogravimetric analysis (TGA) and Fourier Transform Infrared (FTIR) spectroscopy. The antibacterial activity was performed via the broth microdilution method and time-killing assays against Escherichia coli, Staphylococcus aureus, Salmonella enterica, Enterococcus faecalis and Pseudomonas aeruginosa (IDSK concentration range: 0.5-0.002 M). The biofilm biomass eradicating activity was assessed via a crystal violet (CV) assay.

RESULTS

The minimum inhibitory concentration (MIC) of IDSK was 0.25 M for all tested strains, exerting bacteriostatic action. IDSK also reduced biofilm biomass in a dose-dependent manner, reaching rates of about 50% eradication at a dose of 0.25 M. The advantages of using this innovative compound are not limited to disinfecting efficiency but also include its high biodegradability and its sustainable synthesis.

CONCLUSIONS

IDSK could represent an innovative and advantageous disinfectant for food processing and workers' activities, leading to a better quality of food and safer working conditions for the operators.

Antimicrobial poly(ionic liquid)-induced bacterial nanotube formation and drug-resistance spread

Bacterial nanotubes are tubular membranous structures bulging from the cell surface that can connect neighboring bacteria for the exchange of intercellular substances. However, little is known about the formation and function of bacterial nanotubes under the stress of antimicrobial materials. Herein, an imidazolium-type cationic poly(ionic liquid) (PIL) and corresponding PIL membranes with antimicrobial properties were synthesized. The effects of these cationic polymers on the formation of bacterial nanotubes between Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) or Vibrio fischeri (V. fischeri), followed by intraspecies and interspecies exchange of antibiotic resistance genes (ARGs) were investigated. The results showed that bacteria tend to produce more nanotubes accompanied by drug-resistance trade, which can even make the ARGs of pathogens spread to the environmental microbes of V. fischeri. Given the unique antimicrobial sustainability toward bacteria after they acquire ARGs via bacterial nanotubes, antimicrobial PILs demonstrate bright prospects in the battle against resistant bacteria.

Multiple Coordination-Derived Bioactive Hydrogel with Proangiogenic Hemostatic Capacity for Wound Repair

Bioactive hydrogels with multifunctional properties have shown promising potential in promoting wound repair and skin tissue regeneration. The regulation on different stages of skin wound healing (hemostasis and inflammation) is important for wound repair. Herein, a multiple coordination-derived bioactive hydrogel (SGPA) with anti-inflammatory proangiogenic hemostatic capacity for wound repair is reported. The SGPA is prepared through a facile multiple metal coordination action based on the sodium alginate, metal ions (Gd³⁺ ), and bisphosphate functionalized polycitrate. The SGPA exhibits a large porous structure, good injectability, and self-healing performance, as well as controlled biodegradation. Furthermore, the SGPA has good cytocompatibility and hemocompatibility, and can further promote the migration of endothelial cells. The SGPA hydrogel presents good hemostasis capacity in a liver hemorrhage model in vivo. The full-thickness cutaneous wound model demonstrates that the SGPA hydrogel can effectively accelerate the wound repair through down-regulating the inflammatory factors and stimulating the angiogenesis around the wound beds. This work suggests that the multiple metal-organic coordination may be a good strategy to construct the multifunctional bioactive hydrogel for wound repair.

Ionic Liquid-Based Polymer Nanocomposites for Sensors, Energy, Biomedicine, and Environmental Applications: Roadmap to the Future

Current interest toward ionic liquids (ILs) stems from some of their novel characteristics, like low vapor pressure, thermal stability, and nonflammability, integrated through high ionic conductivity and broad range of electrochemical strength. Nowadays, ionic liquids represent a new category of chemical-based compounds for developing superior and multifunctional substances with potential in several fields. ILs can be used in solvents such as salt electrolyte and additional materials. By adding functional physiochemical characteristics, a variety of IL-based electrolytes can also be used for energy storage purposes. It is hoped that the present review will supply guidance for future research focused on IL-based polymer nanocomposites electrolytes for sensors, high performance, biomedicine, and environmental applications. Additionally, a comprehensive overview about the polymer-based composites' ILs components, including a classification of the types of polymer matrix available is provided in this review. More focus is placed upon ILs-based polymeric nanocomposites used in multiple applications such as electrochemical biosensors, energy-related materials, biomedicine, actuators, environmental, and the aviation and aerospace industries. At last, existing challenges and prospects in this field are discussed and concluding remarks are provided.

Ionic Liquids: Emerging Antimicrobial Agents

Antimicrobial resistance has become a serious threat to global health. New antimicrobials are thus urgently needed. Ionic liquids (ILs), salts consisting of organic cations and anions with melting points less than 100°C, have been recently found to be promising in antimicrobial field as they may disrupt the bacterial wall and membrane and consequently lead to cell leakage and death. Different types of antimicrobial ILs are introduced in the review, including cationic, polymeric, and anionic ILs. Being the main type of the antimicrobial ILs, the review focuses on the structure and the antimicrobial mechanisms of cationic ILs. The quantitative structure-activity relationship (QSAR) models of the cationic ILs are also included. Increase in alkyl chain length and lipophilicity is beneficial to increase the antimicrobial effects of cationic ILs. Polymeric ILs are homopolymers of monomer ILs or copolymers of ILs and other monomers. They have great potential in the field of antibiotics as they provide stronger antimicrobial effects than the sum of the monomer ILs. Anionic ILs are composed of existing anionic antibiotics and organic cations, being capable to enhance the solubility and bioavailability of the original form. Nonetheless, the medical application of antimicrobial ILs is limited by the toxicity. The structural optimization aided by QSAR model and combination with existing antibiotics may provide a solution to this problem and expand the application range of ILs in antimicrobial field.

Recent advances in poly(ionic liquid)s for biomedical application

Poly(ionic liquid)s (PILs) are polymers containing ions in their side-chain or backbone, and the designability and outstanding physicochemical properties of PILs have attracted widespread attention from researchers. PILs have specific characteristics, including negligible vapor pressure, high thermal and chemical stability, non-flammability, and self-assembly capabilities. PILs can be well combined with advanced analytical instruments and technology and have made outstanding contributions to the development of biomedicine aiding in the continuous advancement of science and technology. Here we reviewed the advances of PILs in the biomedical field in the past five years with a focus on applications in proteomics, drug delivery, and development. This paper aims to engage pharmaceutical and biomedical scientists to full understand PILs and accelerate the progress from laboratory research to industrialization.

Photodynamic therapy-mediated extirpation of cutaneous resistant dermatophytosis with Ag@ZnO nanoparticles: an efficient therapeutic approach for onychomycosis

Aim: The aim of this study was to determine whether photodynamic therapy of resistant onychomycosis with Ag@ZnO nanoparticles can promote the treatment procedure and extirpates the recurrence of fungal infection. Methods: Ag@ZnO nanoparticles (NPs) under UVB-radiation were applied to treat T. rubrum and T. mentagrophytes in vitro through photodynamic therapy. In vivo therapeutic efficacy, biocompatibility and biodistribution of Ag@ZnO NPs were studied. Results: 40 μg/ml of UVB-activated Ag@ZnO NPs showed 100% antifungal activity against dermatophytosis in vitro and in vivo followed by complete growth prevention by degeneration of spores and mycelium after 180 days, while posed biocompatibility. Conclusion: This study showed the superiority of photodynamic therapy with Ag@ZnO NPs followed by proper regeneration of the skin with Zinc ion of the shell.

Bimetal metal-organic framework domino micro-reactor for synergistic antibacterial starvation/chemodynamic therapy and robust wound healing

Antibacterial chemodynamic therapy (aCDT) has captured considerable attention in the treatment of pathogen-induced infections due to its potential to inactivate bacteria through germicidal reactive oxygen species (ROS). However, the lifespan of ROS generated by CDT is too short to achieve the efficacy of complete sterilization; thus, residual bacteria inevitably reproduce and cause super-infections. To address this concern, we devise an innovative bimetal, metal-organic framework (BMOF) domino micro-reactor (BMOF-DMR), consisting of Cu/Zn-rich BMOF and glucose oxidase (GOx), via electrostatic self-assembly. GOx catalyzes conversion of glucose into H₂O₂, and the Cu²⁺ ions then convert H₂O₂ into ˙OH to kill bacteria, thereby showing a domino effect. Accordingly, the BMOF-DMR not only blocks the nutrient/energy supply for bacteria, but also triggers a Fenton(-like) reaction and glutathione (GSH) depletion in a self-generating H₂O₂ microenvironment, all leading to high-efficiency bactericidal performance through synergistic starvation/chemodynamic therapy. Remarkably, in vitro and in vivo assessments demonstrate that the BMOF-DMR has superior cytocompatibility and exhibits robust ability to accelerate infectious full-thickness cutaneous regeneration through eradicating bacteria, promoting epithelialization of the wound beds and facilitating angiogenesis from the antibacterial activity and delivery of bimetal elements. The advantage of this antibacterial platform is that it suppresses bacterial metabolism by blocking the energy supply, which might prevent secondary infections from residual bacteria. As envisaged, the use of such a micro-reactor with starvation/chemodynamic therapy is a promising approach for combating bacterial skin wounds.

Fast Gelation of Poly(ionic liquid)-Based Injectable Antibacterial Hydrogels

Traditional antibacterial hydrogels have a broad-spectrum bactericidal effect and are widely used as wound dressings. However, the biological toxicity and drug resistance of these antibacterial hydrogels cannot meet the requirements of long-term clinical application. Imidazolium poly(ionic liquids) (PILs) are polymeric antibacterial agents exhibiting strong antibacterial properties, as they contain a strong positive charge. In this study, two imidazolium PILs, namely poly(N-butylimidazolium propiolic acid sodium) (PBP) and poly(N-(3,6-dioxaoctane) imidazolium propiolic acid sodium) (PDP), as high efficiency antibacterial agents, were synthesized by polycondensation reaction. Then, the PILs were compounded with polyethylene glycol (PEG) by a thiol-yne click reaction to prepare injectable antibacterial hydrogels. An in vitro assay showed that the injectable antibacterial hydrogels could not only quickly kill Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus), but also had low toxicity for human skin fibroblasts cells (HSFs) and human umbilical vein endothelial cells (HUVECs), respectively. Additionally, the lipopolysaccharide (LPS) inflammation model revealed that the injectable antibacterial hydrogels also had anti-inflammatory effects, which would be advantageous to accelerate wound healing.

Biocompatible, antibacterial and anti-inflammatory zinc ion cross-linked quaternized cellulose‑sodium alginate composite sponges for accelerated wound healing

Bacterial infection has become one of the most challenges for wound healing, which causes serious inflammatory response and delays the healing process. Herein, a novel sponge with excellent biocompatible, antibacterial and anti-inflammatory properties based on quaternized cellulose (QC), sodium alginate (SA) and Zn²⁺ was reported. The existence of physical interactions, such as electrostatic interaction, chelation and hydrogen bonding endowed the sponges with enhanced mechanical property. The composite sponges exhibited outstanding biocompatibility and hemostatic efficiency due to the compatible nature of the component and physical cross-linking, as well as superior antibacterial property benefited from the synergistic effects of steady Zn²⁺ release and quaternary ammonium group. In vivo investigation validated that the enhanced antibacterial and anti-inflammatory effect of the sponges, which significantly promoted wound closure and the reconstruction of skin tissue through epithelial regeneration, collagen deposition and mitigating inflammatory cell infiltration. Overall, the novel sponge demonstrated great potentials in bacteria-associated wound management.

Ionic Liquid-Based Materials for Biomedical Applications

Ionic liquids (ILs) have been extensively explored and implemented in different areas, ranging from sensors and actuators to the biomedical field. The increasing attention devoted to ILs centers on their unique properties and possible combination of different cations and anions, allowing the development of materials with specific functionalities and requirements for applications. Particularly for biomedical applications, ILs have been used for biomaterials preparation, improving dissolution and processability, and have been combined with natural and synthetic polymer matrixes to develop IL-polymer hybrid materials to be employed in different fields of the biomedical area. This review focus on recent advances concerning the role of ILs in the development of biomaterials and their combination with natural and synthetic polymers for different biomedical areas, including drug delivery, cancer therapy, tissue engineering, antimicrobial and antifungal agents, and biosensing.

The role and mechanism of polydopamine and cuttlefish ink melanin carrying copper ion nanoparticles in antibacterial properties and promoting wound healing

Melanin and its analogue polydopamine (PDA) have attracted considerable attention in biomedical science due to their surface-rich metal binding sites, excellent adhesion and good biocompatibility. Bacterial infections at the wound site and uncontrolled bleeding are associated with a high risk of death, and the prevention of wound infections remains a major challenge. On this basis, the four nanoparticles (NPs) of melanin, PDA, copper ion-loaded melanin (Cu(ii) loaded melanin) and copper ion-loaded PDA (Cu(ii) loaded PDA) were studied in terms of antibacterial and wound healing capabilities. The in vitro experiments showed that Cu(ii) loaded PDA NPs had good blood compatibility and low cytotoxicity, showing the best antibacterial effect in comparison with other samples. Not only could the slow release of copper ions from the nanoparticles kill bacteria, but also the phenolic hydroxyl group and amine groups of PDA NPs played a synergistic role in bacterial death. In wound healing experiments, the Cu(ii) loaded PDA NPs could easily and tightly bind with biological tissue, demonstrating excellent hemostasis, antibacterial and wound healing capabilities. In summary, the excellent properties of Cu(ii) loaded PDA NPs made them a safe and effective drug for preventing wound infection and promoting healing.

Quaternary Ammonium Compounds (QACs) and Ionic Liquids (ILs) as Biocides: From Simple Antiseptics to Tunable Antimicrobials

Quaternary ammonium compounds (QACs) belong to a well-known class of cationic biocides with a broad spectrum of antimicrobial activity. They are used as essential components in surfactants, personal hygiene products, cosmetics, softeners, dyes, biological dyes, antiseptics, and disinfectants. Simple but varied in their structure, QACs are divided into several subclasses: Mono-, bis-, multi-, and poly-derivatives. Since the beginning of the 20th century, a significant amount of work has been dedicated to the advancement of this class of biocides. Thus, more than 700 articles on QACs were published only in 2020, according to the modern literature. The structural variability and diverse biological activity of ionic liquids (ILs) make them highly prospective for developing new types of biocides. QACs and ILs bear a common key element in the molecular structure-quaternary positively charged nitrogen atoms within a cyclic or acyclic structural framework. The state-of-the-art research level and paramount demand in modern society recall the rapid development of a new generation of tunable antimicrobials. This review focuses on the main QACs exhibiting antimicrobial and antifungal properties, commercial products based on QACs, and the latest discoveries in QACs and ILs connected with biocide development.

Advances of peptides for antibacterial applications

In the past few decades, peptide antibacterial products with unique antibacterial mechanisms have attracted widespread interest. They can effectively reduce the probability of drug resistance of bacteria and are biocompatible, so they possess tremendous development prospects. This review provides recent research and analysis on the basic types of antimicrobial peptides (including poly (amino acid)s, short AMPs, and lipopeptides) and factors to optimize antimicrobial effects. It also summarizes the two most important modes of action of antimicrobial peptides and the latest developments in the application of AMPs, including antimicrobial agent, wound healing, preservative, antibacterial coating and others. Finally, we discuss the remaining challenges to improve the antibacterial peptides and propose prospects in the field.

A novel hydrogel with self-healing property and bactericidal activity

In this study, we have designed and synthesized a novel poly (4 - vinyl benzene boronic acid - co - N - vinyl pyrrolidone - co - 1 - vinyl - 3 - butylimidazolium bromide) hydrogel (VNV hydrogel) dressing with good self-healing properties and bactericidal activity. The gelation and self-healing of this hydrogel are mainly achieved by the formation of a dynamic B-O-B bond between the polymer chains, which is fractured by external forces and subsequently reformed. This self-healing mechanism is studied in detail through the molecular design of the hydrogel. The introduction of hydrophilic chemical groups can effectively improve the porous structures, water absorption and molecular migration. These properties have a positive effect on improving self-healing properties of dynamic crosslinked hydrogels. Furthermore, this VNV hydrogel dressing displays good antibacterial activity against E. coli, S. aureus, and C. albicans. The application of VNV hydrogel dressing on rat wound surface can effectively accelerate wound healing. These results indicate that this novel VNV hydrogel dressing with good self-healing properties and bactericidal activity has potential applications in wound dressings.

Robust anti-infective multilayer coatings with rapid self-healing property

Surface coatings are extensively applied on biomedical devices to provide protection against biofouling and infections. However, most surface coatings prevent both bacteria and cells interactions with the biomaterials, limiting their uses as implants. Furthermore, damage to the surface such as scratches and abrasions can happen during transport and clinical usage, resulting in the loss of antibacterial property. In this work, we introduce an efficient method to fabricate stable anti-infective and self-healable multilayer coatings on stainless steel surface via a three-step procedue. Firstly, modified polyethyleneimine (PEI) and poly(acrylic acid) (PAA), both contain pendant furan groups, were deposited on the surface using Layer-by-Layer (LbL) self-assembly technique. Secondly, the polymer layers were cross-linked, via Diels-Alder cycloaddition, using a bismaleimide poly(ethylene glycol) linker, to enhance the stability of the coatings. Thirdly, the Diels-Alder adduct was utilised in the thiol-ene click reaction for post-modification of the coatings, which allowed for the grafting of antimicrobial poly(hexamethylene biguanide) (PHMB) and ε-poly(lysine) (EPL). The resultant multilayer coatings not only exhibited rapid self-healing property, with complete scratch closure within 30 min, but also demonstrated effective antibacterial activity against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). In addition, biofouling of bovine serum albumin was found to be inhibited on the coated surfaces. Furthermore, these coatings showed no toxicity effect towards seeded osteoblastic cells (MC3T3-E1) and evidence of anti-inflamatory activity when tested against macrophage cell line U-937. Our coating method thus represents an effective strategy for the anti-infective protection of biomedical-devices having direct contact with tissues.

Semi-interpenetrating chitosan/ionic liquid polymer networks as electro-responsive biomaterials for potential wound dressings and iontophoretic applications

In this work, electro-responsive chitosan/ionic liquid-based hydrogels were synthetized for the first time, envisaging the development of iontophoretic biomaterials for the controlled release/permeation of charged biomolecules. The main goal was to enhance and tune the physicochemical, mechanical, electro-responsive, and haemostatic properties of chitosan-based biomaterials to obtain multi-stimuli responsive (responsive to electrical current, ionic strength, and pH) and mechanically stable hydrogels. To accomplish this objective, polycationic semi-interpenetrating copolymer networks (semi-IPN) were prepared by combining chitosan (CS) and ionic liquid-based polymers and copolymers, namely poly(1-butyl-3-vinylimidazolium chloride) (poly(BVImCl)) and poly(2-hydroxymethyl methacrylate-co-1-butyl-3-vinylimidazolium chloride) (poly(HEMA-co-BVImCl)). Results show that prepared semi-IPNs presented high mechanical stability and were positively charged over a broad pH range, including basic pH. Semi-IPNs also presented faster permeation and release rates of lidocaine hydrochloride (LH), under external electrical stimulus (0.56 mA/cm²) in aqueous media at 32 °C. The kinetic release constants and the LH diffusion coefficients measured under electrical stimulus were ~1.5 and > 2.7 times higher for those measured for passive release. Finally, both semi-IPNs were non-haemolytic (haemolytic index ≤0.2%) and showed strong haemostatic activity (blood clotting index of ~12 ± 1%). Altogether, these results show that the prepared polycationic semi-IPN hydrogels presented advantageous mechanical, responsive and biological properties that enable them to be potentially employed for the design of new, safer, and advanced stimuli-responsive biomaterials for several biomedical applications such as haemostatic and wound healing dressings and iontophoretic patches.

Anti-biofouling microfiltration membranes based on 1-vinyl-3-butylimidazolium chloride grafted PVDF with improved bactericidal properties and vitro biocompatibility

Polyvinylidene fluoride (PVDF) porous membranes have been widely used as the filtration and separation industry. Herein, novel microfiltration membranes based on 1-vinyl-3-butylimidazolium chloride ([VBIm][Cl]) grafted PVDF (PVDF-g-[VBIm][Cl]) were prepared via the non-solvent induced phase separation method. The chemical composition and microstructure of PVDF-g-[VBIm][Cl] membranes were characterized by Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, Scanning electron microscopy and Water contact angle measurements. The results showed that an increasing in [VBIm][Cl] grafting content leads to the increasing hydrophilicity and wetting capacity of the PVDF-g-[VBIm][Cl] porous membranes. The anti-biofouling properties of membranes were evaluated by measuring the water flux before and after Bovine serum albumin solution treatment. It was found that the modified membranes presented a good anti-biofouling property. The degree of irreversible flux loss caused by protein adsorption dramatically reduced from 42.1% to 2.9% compared with the pristine hydrophobic PVDF membranes. Meanwhile, these PVDF-g-[VBIm][Cl] membranes also exhibited excellent bactericidal properties against both gram-positive bacteria Staphylococcus saureus and gram-negative bacteria Escherichia coli, while PVDF membranes did not show any antibacterial activity. The vitro biocompatibility of the modified membranes was studied by hemolysis analysis, the platelet adhesion observation, thromboelastography assay and cytotoxicity assay. It was found that the incorporation of [VBIm][Cl] into PVDF membranes has less effect on the hemolysis and cytotoxicity of PVDF membranes. Furthermore, both hydrophilicity and charges of the membrane surface played important role in the adhesion and activation of platelet cells, which consequently affected the clotting process of whole blood. The membrane with appropriate [VBIm][Cl] grafting ratio (2.94 wt.%) exhibited good hemocompatibility with less blood coagulation effect. As an ultrafiltration membrane, PVDF-g-[VBIm][Cl] membranes have potential applications in the biomedical field due to the improved antibacterial property and biocompatibility.

The effects of natural compounds on wound healing in Iranian traditional medicine: A comprehensive review

Wounds are physical and anatomical disruption in healthy skin and represent an important healthcare concern around the world. Wound healing is a complex and dynamic cascade of cellular and molecular interactions which include four main phases: hemostasis, inflammatory, proliferative, and remodeling. Therefore, some pharmacological activities such as anti-inflammatory, antioxidant, and antimicrobial activities can play a key role in the process of wound healing. Iranian Traditional Medicine (ITM) has a rich background of practice and a wealth of ancient medicine scientists from the Old Persian days until today. This paper presents and characterizes pure data from original references of ITM about wound remedies and verifies their function by reviewing articles from three databases (Google Scholar, PubMed, and Scopus), which could be an interesting and comprehensive resource for future researchers interested in traditional medicine (TM) generally and in ITM in particular. Selected natural compounds from the references were divided into 5 groups, including herbs, herbal products, animal products, minerals, and animals. In total, 23 natural compounds with regard to the current state of knowledge and ITM were introduced and verified. The present review will provide better insights into ITM and its extensive experience in topics such as wound healing.

UV-Polymerized Vinylimidazolium Ionic Liquids for Permselective Membranes

Ionic liquids are highly charged compounds with increasing applications in material science. A universal approach to synthesize free-standing, vinylalkylimidazolium bromide-containing membranes with an adjustable thickness is presented. By the variation of alkyl side chains, membrane characteristics such as flux and mechanical properties can be adjusted. The simultaneous use of different ionic liquids (ILs) in the synthesis can also improve the membrane properties. In separation application, these charged materials allowed us to retain charged sugars, such as calcium gluconate, by up to 95%, while similar neutral compounds such as glucose passed the membrane. An analysis of the surface conditions using atomic force microscopy (AFM) confirmed the experimental data and explains the decreasing permeance and increased retention of the charged sugars.

Therapeutic Metallic Ions in Bone Tissue Engineering: A Systematic Review of The Literature

An important field of bone tissue engineering (BTE) concerns the design and fabrication of smart scaffolds capable of inducing cellular interactions and differentiation of osteo-progenitor cells. One of these additives that has gained growing attention is metallic ions as therapeutic agents (MITAs). The specific biological advantage that these ions bring to scaffolds as well as other potential mechanical, and antimicrobial enhancements may vary depending on the ion entity, fabrication method, and biomaterials used. Therefore, this article provides an overview on current status of In-vivo application of MITAs in BTE and the remaining challenges in the field. Electronic databases, including PubMed, Scopus, Science direct and Cochrane library were searched for studies on MITAs treatments for BTE. We searched for articles in English from January-2000 to October-2019. Abstracts, letters, conference papers and reviews, In-vitro studies, studies on alloys and studies investigating effects other than enhancement of new bone formation (NBF) were excluded. A detailed summary of relevant metallic ions with specific scaffold material and design, cell type, animal model and defect type, the implantation period, measured parameters and obtained qualitative and quantitative results is presented. No ideal material or fabrication method suited to deliver MITAs can yet be agreed upon, but an investigation into various systems and their drawbacks or potential advantages can lead the future research. A tendency to enhance NBF with MITAs can be observed in the studies. However, this needs to be validated with further studies comparing various ions with each other in the same animal model using critical-sized defects.

Influence of the interfacial molecular structures of quaternary ammonium-type poly(ionic liquid) brushes on their antibacterial properties

Alkyl chains of C4 are more active in killing bacteria than C16 due to their orderly extension toward PBS solution.

Synthesis of N-(3-aminopropyl)imidazole-based poly(ionic liquid) as an adsorbent for the selective recovery of Au(iii) ions from aqueous solutions

A novel poly(ionic liquid) adsorbent (PIL-APIBCl) exhibits a high adsorption capacity of 236.68 mg g⁻¹ for Au(iii).

Ionic Liquids for Therapeutic and Drug Delivery Applications

BACKGROUND

Ionic liquids (ILs) are ionic compounds with highly tunable and remarkable properties which make them an important candidate in multiple domains such as extraction, synthesis, analytics, catalysis, biotechnology, therapeutics as well as pharmaceutical sciences.

OBJECTIVE

This review systematically highlights the classification, properties and toxicity of ionic liquids. It focuses on exploring the biological activity of ionic liquids, which includes antimicrobial and anticancer property along with an emphasis on the concept of Active Pharmaceutical Ingredient- Ionic Liquids (API-ILs) for explaining the emulsifier and solubility enhancement property of ILs. An elaborative discussion on the application of ILs for the development of oral, transdermal and topical drug delivery systems has also been presented with suitable literature support.

CONCLUSION

Ionic liquids possess exceptional potential in the field of medicine, biology and chemistry.

Combinations of Antimicrobial Polymers with Nanomaterials and Bioactives to Improve Biocidal Therapies

The rise of antibiotic-resistant microorganisms has become a critical issue in recent years and has promoted substantial research efforts directed to the development of more effective antimicrobial therapies utilizing different bactericidal mechanisms to neutralize infectious diseases. Modern approaches employ at least two mixed bioactive agents to enhance bactericidal effects. However, the combinations of drugs may not always show a synergistic effect, and further, could also produce adverse effects or stimulate negative outcomes. Therefore, investigations providing insights into the effective utilization of combinations of biocidal agents are of great interest. Sometimes, combination therapy is needed to avoid resistance development in difficult-to-treat infections or biofilm-associated infections treated with common biocides. Thus, this contribution reviews the literature reports discussing the usage of antimicrobial polymers along with nanomaterials or other inhibitors for the development of more potent biocidal therapies.

Coordination-Assisted Self-Assembled Polypeptide Nanogels to Selectively Combat Bacterial Infection

In the present scenario, the invention of bacteria-selective antimicrobial agent comprising negligible toxicity and hemolytic effect is a great challenge. To surmount this challenge, here, a series of polypeptide nanogels (PNGs) have been fabricated by a coordination-assisted self-assembly of a mannose-conjugated antimicrobial polypeptide, poly(arginine-r-valine)-mannose (poly(Arg-r-Val)-M₂), with Zn²⁺ ions. The fabricated PNGs are spherical in shape with a unique structural appearance similar to that of Taxus baccata fruits. PNGs, with a unique structural arrangement and threshold surface charge density, selectively interact with the bacterial membrane and exhibit potent antimicrobial activity, as reflected in their lower minimum inhibitory concentration values (varies from 2 to 16 μg/mL). PNGs show a remarkably high binding constant, 6.02 × 105 M^-1 (from isothermal titration calorimetry, ITC), with the bacterial membrane which manifests its potent bactericidal effect. PNGs are nontoxic against mammalian and red blood cells as reflected from their higher cell viability and insignificant hemolytic effect. PNGs are taken up by the bacterial membrane and selectively undergo structural deformation (scrutinized by ITC) followed by an exposure of free poly(Arg-r-Val)-M₂ molecules. The free poly(Arg-r-Val)-M₂ molecules are enforced to lyse the bacterial membrane (visualized by cryo-transmission electron microscopy) followed by the diffusion of the cytoplasmic component out of the membrane which culminates in the final death of the bacterium.

Host defense peptide mimicking poly-β-peptides with fast, potent and broad spectrum antibacterial activities

Microbial infections have always been serious challenges to human health considering that antibiotics almost inevitably induce microbial resistance. Therefore, it is urgent to develop a new antibacterial agent that is active against drug-resistant bacteria and is less susceptible to microbial resistance. In this work, a series of host defense peptide (HDP) mimicking antibacterial poly-β-peptides were synthesized, characterized and evaluated for their biological activities. The best poly-β-peptide within this study (20 : 80 Bu : DM) displays potent and broad spectrum antibacterial activity against antibiotic-resistant super bugs and low toxicity toward mammalian cells. Moreover, these poly-β-peptides are bactericidal and kill bacteria very fast within 5 min. An antimicrobial resistance test demonstrated that bacteria develop no resistance toward the selected poly-β-peptides even over 1000 generations. Our studies demonstrate that random copolymers of heterochiral poly-β-peptides, without the need for defined secondary structures, can mimic the antimicrobial HDP. These results imply the potential application of these poly-β-peptides as new antimicrobial agents to tackle drug resistant antimicrobial infections.

Harnessing Metal Homeostasis Offers Novel and Promising Targets Against Candida albicans

Fungal infections, particularly of Candida species, which are the commensal organisms of human, are one of the major debilitating diseases in immunocompromised patients. The limited number of antifungal drugs available to treat Candida infections, with the concomitant increasing incidence of multidrug-resistant (MDR) strains, further worsens the therapeutic options. Thus, there is an urgent need for the better understanding of MDR mechanisms, and their reversal, by employing new strategies to increase the efficacy and safety profiles of currently used therapies against the most prevalent human fungal pathogen, Candida albicans. Micronutrient availability during C. albicans infection is regarded as a critical factor that influences the progression and magnitude of the disease. Intracellular pathogens colonize a variety of anatomical locations that are likely to be scarce in micronutrients, as a defense strategy adopted by the host, known as nutritional immunity. Indispensable critical micronutrients are required both by the host and by C. albicans, especially as a cofactor in important metabolic functions. Since these micronutrients are not freely available, C. albicans need to exploit host reservoirs to adapt within the host for survival. The ability of pathogenic organisms, including C. albicans, to sense and adapt to limited micronutrients in the hostile environment is essential for survival and confers the basis of its success as a pathogen. This review describes that micronutrients availability to C. albicans is a key attribute that may be exploited when one considers designing strategies aimed at disrupting MDR in this pathogenic fungi. Here, we discuss recent advances that have been made in our understanding of fungal micronutrient acquisition and explore the probable pathways that may be utilized as targets.

Charge transport and glassy dynamics in polymeric ionic liquids as reflected by their inter- and intramolecular interactions

Polymeric ionic liquids (PILs) form a novel class of materials in which the extraordinary properties of ionic liquids (ILs) are combined with the mechanical stability of polymeric systems qualifying them for multifold applications. In the present study broadband dielectric spectroscopy (BDS), Fourier transform infrared spectroscopy (FTIR), AC-chip calorimetry (ACC) and differential scanning calorimetry (DSC) are combined in order to unravel the interplay between charge transport and glassy dynamics. Three low molecular weight ILs and their polymeric correspondents are studied with systematic variations of anions and cations. For all examined samples charge transport takes place by glassy dynamics assisted hopping conduction. In contrast to low molecular weight ILs the thermal activation of DC conductivity for the polymeric systems changes from a Vogel-Fulcher-Tammann- to an Arrhenius-dependence at a (sample specific) temperature Tσ0. This temperature has been widely discussed to coincide with the glass transition temperature Tg, a refined analysis, instead, reveals Tσ0 of all PILs under study at up to 80 K higher values. In effect, below the Tσ0 charge transport in PILs becomes more efficient - albeit on a much lower level compared to the low molecular weight pendants - indicating conduction paths along the polymer chain. This is corroborated by analysing the temperature dependence of specific IR-active vibrations showing at Tσ0 distinct changes in the spectral position and the oscillator strength, whereas other molecular units are not affected. This leads to the identification of charge transport responsive (CTR) as well as charge transport irresponsive (CTI) moieties and paves the way to a refined molecular understanding of electrical conduction in PILs.

Integrated Endotoxin Adsorption and Antibacterial Properties of Cationic Polyurethane Foams for Wound Healing

Gram-negative bacteria, containing toxic proinflammatory and pyrogenic substances [endotoxin or lipopolysaccharide (LPS)], can lead to infection and associated serious diseases, such as sepsis and septic shock. Development of antimicrobial materials with intrinsically endotoxin adsorption activity can prevent the release of bacterial toxic components while killing bacteria. Herein, a series of imidazolium-type polyurethane (PU) foams with antimicrobial properties were synthesized. The content effects of cationic moieties on the antimicrobial activities against Gram-negative Escherichia coli and Pseudomonas aeruginosa and Gram-positive Staphylococcus aureus as well as the endotoxin adsorption property were investigated. The obtained PU foams show slightly higher efficiency against two Gram-negative strains than for Gram-positive one and high absorbability of LPS. A wound healing test using P. aeruginosa and its isolated LPS-treated mice as the models further demonstrated that imidazolium-type PU foams combine both antibacterial and endotoxin adsorption properties and may have a potential application as an antimicrobial wound dressing in a clinical setting.