Fabrication of Embedded Silver Nanowires on Arbitrary Substrates with Enhanced Stability via Chemisorbed Alkanethiolate

Universal Strategy for Inorganic Nanoparticle Incorporation into Mesoporous Liquid Crystal Polymer Particles

Developing inorganic-organic composite polymers necessitates a new strategy for effectively controlling shape and optical properties while accommodating guest materials, as conventional polymers primarily act as  carriers that transport inorganic substances. Here, a universal approach is introduced utilizing mesoporous liquid crystal polymer particles (MLPs) to fabricate inorganic-organic composites. By leveraging the liquid crystal phase, morphology and optical properties are precisely controlled through the molecular-level arrangement of the host, here monomers. The controlled host material allows the synthesis of inorganic particles within the matrix or accommodation of presynthesized nano-inorganic particles, all while preserving the intrinsic properties of the host material. This composite material surpasses the functional capabilities of the polymer alone by sequentially integrating one or more inorganic materials, allowing for the incorporation of multiple functionalities within a single polymer particle. Furthermore, this approach effectively mitigates the drawbacks associated with guest materials resulting in a substantial enhancement of composite performance. The presented approach is anticipated to hold immense potential for various applications in optoelectronics, catalysis, and biosensing, addressing the evolving demands of the society.

First-principles study of mercaptoundecanoic acid molecule adsorption and gas molecule penetration onto silver surface: an insight for corrosion protection

Recently, 11-mercaptoundecanoic acid (MUA) molecule has attracted attention as a promising passivation agent of Ag nanowire (NW) network electrode for corrosion inhibition, but the underneath mechanism has not been elaborated. In this work, we investigate adsorption of MUA molecule on Ag(1 0 0) and Ag(1 1 1) surface, adsorption of air gas molecules of H2O, H2S and O2 on MUA molecular end surface, and their penetrations into the Ag surface using the first-principles calculations. Our calculations reveal that the MUA molecule is strongly bound to the Ag surface with the binding energies ranging from -0.47 to -2.06 eV and the Ag-S bond lengths of 2.68-2.97 Å by Lewis acid-base reaction. Furthermore, we find attractive interactions between the gas molecules and the MUA@Ag complexes upon their adsorptions and calculate activation barriers for their migrations from the outermost end of the complexes to the top of Ag surface. It is found that the penetrations of H2O and H2S are more difficult than the O2 penetration due to their higher activation barriers, while the O2 penetration is still difficult, confirming the corrosion protection of Ag NW network by adsorbing the uniform monolayer of MUA. With these findings, this work can contribute to finding a better passivation agent in the strategy of corrosion protection of Ag NW network electrode.

High Sensitivity, Wide Linear-Range Strain Sensor Based on MXene/AgNW Composite Film with Hierarchical Microcrack

Stretchable strain sensors suffer the trade-off between sensitivity and linear sensing range. Developing sensors with both high sensitivity and wide linear range remains a formidable challenge. Different from conventional methods that rely on the structure design of sensing nanomaterial or substrate, here a heterogeneous-surface strategy for silver nanowires (AgNWs) and MXene is proposed to construct a hierarchical microcrack (HMC) strain sensor. The heterogeneous surface with distinct differences in cracks and adhesion strengths divides the sensor into two regions. One region contributes to high sensitivity through penetrating microcracks of the AgNW/MXene composite film during stretching. The other region maintains conductive percolation pathways to provide a wide linear sensing range through network microcracks. As a result, the HMC sensor exhibits ultrahigh sensitivity (gauge factor ≈ 244), broad linear range (ɛ = 60%, R2 ≈ 99.25%), and fast response time (<30 ms). These merits are confirmed in the detection of large and subtle human motions and digital joint movement for Morse coding. The manipulation of cracks on the heterogeneous surface provides a new paradigm for designing high-performance stretchable strain sensors.

Molecular mechanics of Ag nanowire transfer processes subjected to contact loading by a PDMS substrate

Precise transfer and attachment of a single nanowire to a target substrate is an interesting technique in surface engineering. The spacing, which restrains the attachment of a nanowire to a substrate, and the bending strain that occurs when the nanowire detaches from the elastomeric donor are important design parameters. In this regard, in this study, all-atom molecular dynamics (MD) simulations were conducted to analyse the mechanical behaviour of a penta-twinned silver nanowire (AgNW) placed on a polydimethylsiloxane (PDMS) donor substrate to elucidate the relevant transfer process. The bow deformation of the AgNW at the delamination front of PDMS was characterized as a function of its diameter and aspect ratio. The mechanisms of dislocation slip and propagation as well as the internal stress distribution of the AgNW were then examined. The results showed that twin boundary formation during the bow deformation is a key factor affecting the strain hardening of the AgNW and leading to complete plastic strain recovery after the removal of the PDMS substrate. Furthermore, the process was demonstrated experimentally by a localized bonding and transfer of AgNWs by continuous-wave laser irradiation. Based on the computational and experimental findings, an empirical model considering the shape parameters of AgNWs that can ensure a successful transfer process was established, which is essential for high-performance AgNW electrode design.

Enhanced stability of silver nanowire transparent conductive films against ultraviolet light illumination

Silver nanowires are susceptible to degradation under ultraviolet (UV) light illumination. Encapsulating silver nanowire transparent conductive films (AgNW TCFs) with UV shielding materials usually result in the increasing of the sheet resistance or the decrease of the visible light transparency. Herein, we combine a reducing species (FeSO₄) and a thin layer (overcoating) of UV shielding material to solve the stability and the optical performance issues simultaneously. The AgNW TCFs show excellent stability under continuous UV light illumination for 14 h, and their sheet resistance varies only 6%. The dramatic enhancement of the stability against UV light illumination for as-obtained TCFs will make them viable for real-world applications in touch panels and displays.

Embedding Silver Nanowires into a Hydroxypropyl Methyl Cellulose Film for Flexible Electrochromic Devices with High Electromechanical Stability

Transparent conductive films (TCFs) based on silver nanowires (AgNWs) are becoming one of the best candidates in realizing flexible optoelectronic devices. The AgNW-based TCF is usually prepared by coating AgNWs on a transparent polymer film; however, the coated AgNWs easily detach from the polymer underneath because of the weak adhesion between them. Herein, a network of AgNWs is embedded in the transparent hydroxypropyl methyl cellulose film, which has a strong adhesion with the AgNWs. The obtained TCF shows high optical transmittance (>85%), low roughness (rms = 4.8 ± 0.5 nm), and low haze (<0.2%). More importantly, owing to the embedding structure and strong adhesion, this TCF also shows excellent electromechanical stability, which is superior to the reported ones. Employing this TCF in a flexible electrochromic device, the obtained device exhibits excellent cyclic electromechanical stability and high coloring efficiency. Our work demonstrates a promising TCF with superior electromechanical stability for future applications in flexible optoelectronics.

Optically Programmable Plateau-Rayleigh Instability for High-Resolution and Scalable Morphology Manipulation of Silver Nanowires for Flexible Optoelectronics

The ability to engineer microscale and nanoscale morphology upon metal nanowires (NWs) has been essential to achieve new electronic and photonic functions. Here, this study reports an optically programmable Plateau-Rayleigh instability (PRI) to demonstrate a facile, scalable, and high-resolution morphology engineering of silver NWs (AgNWs) at temperatures <150 °C within 10 min. This has been accomplished by conjugating a photosensitive diphenyliodonium nitrate with AgNWs to modulate surface-atom diffusion. The conjugation is UV-decomposable and able to form a cladding of molten salt-like compounds, so that the PRI of the AgNWs can be optically programmed and triggered at a much lower temperature than the melting point of AgNWs. This PRI self-assembly technique can yield both various novel nanostructures from single NW and large-area microelectrodes from the NW network on various substrates, such as a nanoscale dot-dash chain and the microelectrode down to 5 μm in line width that is the highest resolution ever fabricated for the AgNW-based electrode. Finally, the patterned AgNWs as flexible transparent electrodes were demonstrated for a wearable CdS NW photodetector. This study provides a new paradigm for engineering metal micro-/nanostructures, which holds great potential in fabrication of various sophisticated devices.

Increasing Silver Nanowire Network Stability through Small Molecule Passivation

Silver nanowire (AgNW) transparent electrodes show promise as an alternative to indium tin oxide (ITO). However, these nanowire electrodes degrade in air, leading to significant resistance increases. We show that passivating the nanowire surfaces with small organic molecules of 11-mercaptoundecanoic acid (MUA) does not affect electrode transparency contrary to typical passivation films, and is inexpensive and simple to deposit. The sheet resistance of a 32 nm diameter silver nanowire network coated with MUA increases by only 12% over 120 days when exposed to atmospheric conditions but kept in the dark. The increase is larger when exposed to daylight (588%), but is still nearly two orders of magnitude lower than the resistance increase of unpassivated networks. The difference between the experiments performed under daylight versus the dark exemplifies the importance of testing passivation materials under light exposure.

Comprehensive Stability Improvement of Silver Nanowire Networks via Self-Assembled Mercapto Inhibitors

Instability of silver nanowire (AgNW) has been regarded as a major obstacle to its practical applications in optoelectrical devices as transparent electrodes. Physical barrier layers such as polymer, metal, and graphene have been generally employed to improve the stability of AgNW in previous study. Herein, we first report self-assembled organothiols as an inhibitor for AgNW to achieve an overall enhancement in antioxidation, antisulfidation, thermal stability, and anti-electromigration. The self-assembled monolayers (SAMs) of phenyl azoles, methoxy silane, and methyl alkane were formed on the surface of AgNW via Ag-S covalent bond as barrier layers which provided protective effects against corrosives (e.g., O₂, H₂S). In particular, the decoration of 2-mercaptobenzimidazole (MBI) offered the best resistance to H₂S and excellent stability under a high-temperature and high-humidity environment (85 °C and 85 RH %) for 4 months. Moreover, different SAMs exhibited a stabilizing or destabilizing effect on Plateau-Rayleigh instability of AgNW, which realized the tunability of degradation temperature of AgNWs, for example, increasing by ≥100 °C with MBI SAM or decreasing by ∼50 °C with octadecanethiol SAM compared with pristine AgNWs. Notably, the MBI-decorated AgNWs could survive at 400 °C which is by far the highest bearing temperature for solution-processed AgNW film. As a result, a transparent heater made of the MBI-AgNWs exhibited superior heating characteristics (higher working temperature and durability), as compared with the pristine AgNW-based heater. Our findings on the organothiols decoration not only provide a new paradigm in overall stability improvement of NW of noble metals but also show the potential in morphology controllability of metal NW.

Pressure Welding of Silver Nanowires Networks at Room Temperature as Transparent Electrodes for Efficient Organic Light-Emitting Diodes

In this work, polymethylmethacrylate (PMMA) as a superior mediate for the pressure welding of silver nanowires (Ag NWs) networks as transparent electrodes without any thermal treatment is demonstrated. After a pressing of 200 kg cm^-2 , not only the sheet resistance but also the surface roughness of the PMMA-mediated Ag NWs networks decreases from 2.6 kΩ sq^-1 to 34.3 Ω sq^-1 and from 76.1 to 12.6 nm, respectively. On the other hand, high transparency of an average transmittance in the visible wavelengths of 93.5% together with a low haze value of 2.58% can be achieved. In terms of optoelectronic applications, the promising potential of the PMMA-mediated pressure-welded Ag NWs networks used as a transparent electrode in a green organic light-emitting diode (OLED) device is also demonstrated. In comparison with the OLED based on commercial tin-doped indium oxide electrode, the increments of power efficiency and external quantum efficiency (EQE) from 80.1 to 85.9 lm w^-1 and 19.2% to 19.9% are demonstrated. In addition, the PMMA-mediated pressure welding succeeds in transferring Ag NWs networks to flexible polyethylene naphthalate and polyimide substrates with the sheet resistance of 42 and 91 Ω sq^-1 after 10 000 times of bending, respectively.

Bio-inspired semi-transparent silver nanowire conductor based on a vein network with excellent electromechanical and photothermal properties

A bio-inspired conductive binary-network of vein–silver nanowires (AgNWs) was embedded in poly(dimethylsiloxane) (PDMS) to prepare a semi-transparent stretchable conductor (vein–AgNWs–PDMS) by a simple dipping process. The special conductive structure was constructed by using veins with a porous structure as an ideal skeleton to load AgNW networks, which allowed the vein–AgNWs–PDMS composite to show a low sheet resistance of 1 Ω sq⁻¹ with 74% transmittance. The figure of merit of vein–AgNWs–PDMS is as high as 2502 and can be adjusted easily by controlling the times of the dipping cycle. Furthermore, the vein–AgNWs–PDMS conductor can retain high conductivity after 150% mechanical elongation and exhibit excellent electromechanical stability in repeated stretch/release tests with 60% strain (500 cycles). As an example of an application, patterned light-emitting diode (LED) arrays using the vein–AgNWs–PDMS conductors have been fabricated, and worked well under deformation. Moreover, the photo-thermal properties of the vein–AgNWs–PDMS composite have been demonstrated by a position heating experiment using near-infrared (NIR) laser irradiation and the generated heat can be effectively dissipated through the vein network to avoid local overheating. Due to the high-performance and facile fabrication process, the vein–AgNWs–PDMS conductors will have multifunctional applications in stretchable electronic devices.

A bio-inspired binary-network conductive structure of vein–AgNWs was embedded in poly(dimethylsiloxane) to prepare a semi-transparent stretchable conductor (vein–AgNWs–PDMS) with a good photo-thermal effect for position heating and excellent electromechanical stability.

An Implantable Transparent Conductive Film with Water Resistance and Ultrabendability for Electronic Devices

Recently, instead of indium tin oxide, the random mesh pattern of metallic nanowires for flexible transparent conducting electrodes (FTCEs) has received a great amount of interest due to its flexibility, low resistance, reasonable price, and compliant processes. Mostly, nanowires for FTCEs are fabricated by spray or mayer coating methods. However, the metallic nanowire layer of FTCEs, which is fabricated by these methods, has a spiked surface roughness and low junction contact between the nanowires that lead to their high sheet resistance value. Also, the nanowires on FTCEs are easy to peel-off through exterior forces such as bending, twisting, or contact. To solve these problems, we demonstrate novel methods through which silver nanowires (AgNWs) are deposited onto a nanosize porous nitrocellulose (NC) substrate by electrophoretic deposition (EPD) and an opaque and porous substrate. Respectively, through dimethyl sulfoxide treatment, AgNWs on NC (AgNW/NC) is changed to the transparent and nonporous FTCEs. This enhances the junction contact of the AgNWs by EPD and also allows a permanent attachment of AgNWs onto the substrate. To show the mechanical strength of the AgNWs on the transparent nitrocellulose (AgNW/TNC), it is tested by applying diverse mechanical stress, such as a binding test (3M peel-off), compressing, bending, twisting, and folding. Next, we demonstrate that AgNW/TNC can be effectively implanted onto normal newspapers and papers. As paper electronics, light-emitting diodes, which are laminated onto paper, are successfully operated through a basic AgNW/TNC strip circuit. Finally, it is demonstrated that AgNW/TNC and AgNW/TNC on paper are water resistant for 15 min due to the insulation properties of the nonporous substrate.