Direct Synthesis of Dextran-Based Antibacterial Hydrogels for Extended Release of Biocides and Eradication of Topical Biofilms

Hydroxypropyl chitosan/ε-poly-l-lysine based injectable and self-healing hydrogels with antimicrobial and hemostatic activity for wound repair

The biggest obstacle to treating wound healing continues to be the production of simple, inexpensive wound dressings that satisfy the demands associated with full process of repair at the same time. Herein, a series of injectable composite hydrogels were successfully prepared by a one-pot method by utilizing the Schiff base reaction as well as hydrogen bonding forces between hydroxypropyl chitosan (HCS), ε-poly-l-lysine (EPL), and 2,3,4-trihydroxybenzaldehyde (TBA), and multiple cross-links formed by the reversible coordination between iron (III) and pyrogallol moieties. Notably, hydrogel exhibits excellent physicochemical properties, including injectability, self-healing, water retention, and adhesion, which enable to fill irregular wounds for a long period, providing a suitable moist environment for wound healing. Interestingly, the excellent hemostatic properties of the hydrogel can quickly stop bleeding and avoid the serious sequelae of massive blood loss in acute trauma. Moreover, the powerful antimicrobial and antioxidant properties also protect against bacterial infections and reduce inflammation at the wound site, thus promoting healing at all stages of the wound. The study of biohydrogel with multifunctional integration of wound treatment and smart medical treatment is clarified by this line of research.

Stimuli-Responsive Release-Active Dressing: A Promising Solution for Eradicating Biofilm-Mediated Wound Infections

Biofilm-mediated wound infections pose a significant challenge due to the limitations of conventional antibiotics, which often exhibit narrow-spectrum activity, fail to eliminate recurrent bacterial contamination, and are unable to penetrate the biofilm matrix. While the search for alternatives has explored the use of metal nanoparticles and synthetic biocides, these solutions often suffer from unintended toxicity to surrounding tissues and lack controlled administration and release. In this study, we engineered a pH-responsive release-active dressing film based on carboxymethyl cellulose, incorporating a synthetic antibacterial molecule (SAM-17). The dressing film exhibited optimal mechanical stability for easy application and demonstrated excellent fluid absorption properties, allowing for prolonged moisturization at the site of injury. The film exhibited pH-dependent release of cargo, with 78% release within 24 h at acidic pH, enabling targeted antibacterial drug delivery within the wound microenvironment. Furthermore, the release-active film effectively eliminated repeated challenges of bacterial contamination. Remarkably, the film demonstrated a minimal toxicity profile in both in vitro and in vivo models. The film eliminated preformed bacterial biofilms, achieving a reduction of 2.5 log against methicillin-resistant Staphylococcus aureus (MRSA) and 4.1 log against vancomycin-resistant S. aureus (VRSA). In a biofilm-mediated MRSA wound infection model, this release-active film eradicated the biofilm-embedded bacteria by over 99%, resulting in accelerated wound healing. These findings highlight the potential of this film as an effective candidate for tackling biofilm-associated wound infections.

Hemostatic and Ultrasound-Controlled Bactericidal Silk Fibroin Hydrogel via Integrating a Perfluorocarbon Nanoemulsion

Excessive blood loss and infections are the prominent risks accounting for mortality and disability associated with acute wounds. Consequently, wound dressings should encompass adequate adhesive, hemostatic, and bactericidal attributes, yet their development remains challenging. This investigation presented the benefits of incorporating a perfluorocarbon nanoemulsion (PPP NE) into a silk-fibroin (SF)-based hydrogel. By stimulating the β-sheet conformation of the SF chains, PPP NEs drastically shortened the gelation time while augmenting the elasticity, mechanical stability, and viscosity of the hydrogel. Furthermore, the integration of PPP NEs improved hemostatic competence by boosting the affinity between cells and biomacromolecules. It also endowed the hydrogel with ultrasound-controlled bactericidal ability through the inducement of inner cavitation by perfluorocarbon and reactive oxygen species (ROS) generated by the sonosensitizer protoporphyrin. Ultimately, we employed a laparotomy bleeding model and a Staphylococcus aureus-infected trauma wound to demonstrate the first-aid efficacy. Thus, our research suggested an emulsion-incorporating strategy for managing emergency wounds.

Optimize the parameters for the synthesis by the ionic gelation technique, purification, and freeze-drying of chitosan-sodium tripolyphosphate nanoparticles for biomedical purposes

BACKGROUND

Polymeric nanoparticles can be used for wound closure and therapeutic compound delivery, among other biomedical applications. Although there are several nanoparticle obtention methods, it is crucial to know the adequate parameters to achieve better results. Therefore, the objective of this study was to optimize the parameters for the synthesis, purification, and freeze-drying of chitosan nanoparticles. We evaluated the conditions of agitation speed, anion addition time, solution pH, and chitosan and sodium tripolyphosphate concentration.

RESULTS

Chitosan nanoparticles presented an average particle size of 172.8 ± 3.937 nm, PDI of 0.166 ± 0.008, and zeta potential of 25.00 ± 0.79 mV, at the concentration of 0.1% sodium tripolyphosphate and chitosan (pH 5.5), with a dripping time of 2 min at 500 rpm. The most representative factor during nanoparticle fabrication was the pH of the chitosan solution, generating significant changes in particle size and polydispersity index. The observed behavior is attributed to the possible excess of sodium tripolyphosphate during synthesis. We added the surfactants poloxamer 188 and polysorbate 80 to evaluate the stability improvement during purification (centrifugation or dialysis). These surfactants decreased coalescence between nanoparticles, especially during purification. The centrifugation increased the zeta potential to 40.8-56.2 mV values, while the dialyzed samples led to smaller particle sizes (152-184 nm). Finally, freeze-drying of the chitosan nanoparticles proceeded using two cryoprotectants, trehalose and sucrose. Both adequately protected the system during the process, and the sugar concentration depended on the purification process.

CONCLUSIONS

In Conclusion, we must consider each surfactant's benefits in formulations for selecting the most suitable. Also, it is necessary to do more studies with the molecule to load. At the same time, the use of sucrose and trehalose generates adequate protection against the freeze-drying process, even at a 5% w/v concentration. However, adjusting the percentage concentration by weight must be made to work with the CS-TPP NPs purified by dialysis.

Structure-activity relationship of drug conjugated polymeric materials against uropathogenic bacteria colonization under in vitro and in vivo settings

The human world has been plagued with different kinds of bacterial infections from time immemorial. The increased development of resistance towards commercial antibiotics has made these bacterial infections an even more critical challenge. Bacteria have modified their mode of interactions with different types of commercial drugs by bringing changes to the receptor proteins or by other resisting mechanisms like drug efflux. Various chemical approaches have been made to date to fight against these smart adapting species. Towards this, we hypothesize chemically modifying the commercial antibacterial drugs in order to deceive the bacteria and destroy the bacterial biomass. In this study, different molecular weight polyethyleneimines are taken and conjugated with some well-known commercial drugs like penicillin and chloramphenicol to explore their antibacterial properties against some of the laboratory and uro-pathogenic strains of Gram-positive and Gram-negative bacteria. A detailed structure-activity relationship of these polymeric prodrug-like materials has been evaluated to determine the optimum formulation. The standardized system not only shows significant ∼90% bacterial killing in liquid broth culture, but also demonstrates promising bacterial inhibition towards biofilm formation for the pathogenic strains on inanimate surfaces like urinary catheters and on an in vivo mouse skin abrasion model. The reported bioactive polymeric materials can be successfully used for widespread therapeutic applications with promising medical relevance.

A rapid-crosslinking antimicrobial hydrogel with enhanced antibacterial capabilities for improving wound healing

One of the main reasons impeding wound healing is wound infection caused by bacterial colonization with a continuous stage of inflammation. Traditional wound treatments like gauze are being replaced by tissue adhesives with strong wet tissue adhesion and biocompatibility. Herein, a fast-crosslinking hydrogel is developed to achieve both strong antimicrobial properties and excellent biocompatibility. In this study, a simple and non-toxic composite hydrogel was prepared by the Schiff base reaction between the aldehyde group of 2,3,4-trihydroxybenzaldehyde (TBA) and the amino group of ε-Poly-_L-lysine (EPL). Subsequently, a succession of experiments toward this new hydrogel including structure characterization, antimicrobial properties, cell experiment and wound healing were applied. The results of the experiments show that the EPL-TBA hydrogel not only exhibited excellent contact-active antimicrobial activities against Gram-negative bacteria Escherichia coli (E. coil) and Gram-positive Bacteria Staphylococcus aureus (S. aureus), but also inhibited the biofilm formation. More importantly, the EPL-TBA hydrogel promoted the wound healing with low cytotoxicity in vivo. These findings indicate that the EPL-TBA hydrogel has a promising use as a wound dressing in the bacterial infection prevention and wounds healing acceleration.

Antibacterial-Based Hydrogel Coatings and Their Application in the Biomedical Field-A Review

Hydrogels exhibit excellent moldability, biodegradability, biocompatibility, and extracellular matrix-like properties, which make them widely used in biomedical fields. Because of their unique three-dimensional crosslinked hydrophilic networks, hydrogels can encapsulate various materials, such as small molecules, polymers, and particles; this has become a hot research topic in the antibacterial field. The surface modification of biomaterials by using antibacterial hydrogels as coatings contributes to the biomaterial activity and offers wide prospects for development. A variety of surface chemical strategies have been developed to bind hydrogels to the substrate surface stably. We first introduce the preparation method for antibacterial coatings in this review, which includes surface-initiated graft crosslinking polymerization, anchoring the hydrogel coating to the substrate surface, and the LbL self-assembly technique to coat crosslinked hydrogels. Then, we summarize the applications of hydrogel coating in the biomedical antibacterial field. Hydrogel itself has certain antibacterial properties, but the antibacterial effect is not sufficient. In recent research, in order to optimize its antibacterial performance, the following three antibacterial strategies are mainly adopted: bacterial repellent and inhibition, contact surface killing of bacteria, and release of antibacterial agents. We systematically introduce the antibacterial mechanism of each strategy. The review aims to provide reference for the further development and application of hydrogel coatings.

Preparation of new hydrogels by visible light cross-linking of dextran methacrylate and poly(ethylene glycol)-maleic acid copolymer

In this work, a series of new biodegradable and biocompatible hydrogels were synthesized by photopolymerization of dextran-methacrylate (DXM) with poly(ethylene glycol)-maleic acid copolymer (poly(PEG-co-MA, PEGMA)) using (-)-riboflavin as a visible light photoinitiator and L-arginine as a co-photoinitiator. DXM was prepared by acylation of dextran (DX) with methacryloyl chloride (MAC), and PEGMA was synthesized by polycondensation of poly(ethylene glycol) (PEG) and maleic acid (MA). The DXM and PEGMA were characterized by FT-IR and ¹HNMR spectroscopy. Different types of hydrogels from various ratios of DXM and PEGMA were prepared and characterized by SEM. The results showed that the prepared hydrogel by photo-cross-linking of DXM (DPHG0) was transparent and flexible, and its physical shape was excellent, but it was sticky. The stickiness was reduced by increasing the PEGMA contents, and different types of DXM/PEGMA hydrogels (DPHG1-4) with various properties were prepared. For example, DPHG2 (PEGMA content was 0.25 g) was transparent and flexible, its physical shape was excellent, and it was not sticky. The prepared hydrogels showed excellent cytocompatibility, and their tensile and compressive strength were also evaluated. Additionally, the in vitro degradation and swelling ratios of the prepared hydrogels were studied in buffer solution at different pHs.

Biocide loaded shear-thinning hydrogel with anti-biofilm efficacy cures topical infection

The continuous intervention of multidrug-resistant (MDR) bacterial infections worsens and slows the dynamicity of natural wound healing processes. Fortunately, antibiotics, metal ions, or metal nanoparticle-loaded antimicrobial hydrogels have been developed to tackle infections at injury sites and speed up the healing process. Despite their success, these marketed released based hydrogels are still limited owing to their lack of broad-spectrum activity, inability to tackle biofilm-associated infections, susceptibility towards resistance development, fast release kinetics, and mild to moderate toxicity. To address these shortcomings, we report the development of a biocompatible, shear-thinning, injectable gellan-gelatin hydrogel loaded with a peptidomimetic potent biocide (ASAM-10). The hydrogel upon sustained biocide release (60% within 72 h), displays a broad-spectrum antibacterial activity with negligible in vitro (hemolysis < 20%) and in vivo toxicity (no adverse effects on dermal layer of mice). Besides tackling bacterial dormant subpopulation (1-6 Log reduction), the optimized hydrogel is able to disrupt the preformed bacterial biofilm and even kill the biofilm-trapped pathogens with enhanced pathogenicity. Above all, the lead hydrogel was proficient in tackling methicillin-resistant Staphylococcus aureus (MRSA) wound infections in a mouse model through its safe topical administration. Overall, the biocide-loaded hydrogel can be considered as a promising candidate to combat MDR chronic infections at the wound site.

Advances in Algin and Alginate-Hybrid Materials for Drug Delivery and Tissue Engineering

In this review, we aim to provide a summary of recent research advancements and applications of algin (i.e., alginic acid) and alginate-hybrid materials (AHMs) in medical fields. Algin/alginate are abundant natural products that are chemically inert and biocompatible, and they have superior gelation properties, good mechanical strengths, and biodegradability. The AHMs have been widely applied in wound dressing, cell culture, tissue engineering, and drug delivery. However, medical applications in different fields require different properties in the AHMs. The drug delivery application requires AHMs to provide optimal drug loading, controlled and targeted drug-releasing, and/or visually guided drug delivery. AHMs for wound dressing application need to have improved mechanical properties, hydrophilicity, cell adhesion, and antibacterial properties. AHMs for tissue engineering need improved mechanical properties that match the target organs, superior cell affinity, and cell loading capacity. Various methods to produce AHMs that meet different needs were summarized. Formulations to form AHMs with improved stability, drug/cell-loading capacity, cell adhesion, and mechanical properties are active research areas. This review serves as a road map to provide insights into the strategies to develop AHMs in medical applications.

Alginate as a Promising Biopolymer in Drug Delivery and Wound Healing: A Review of the State-of-the-Art

Biopolymeric nanoparticulate systems hold favorable carrier properties for active delivery. The enhancement in the research interest in alginate formulations in biomedical and pharmaceutical research, owing to its biodegradable, biocompatible, and bioadhesive characteristics, reiterates its future use as an efficient drug delivery matrix. Alginates, obtained from natural sources, are the colloidal polysaccharide group, which are water-soluble, non-toxic, and non-irritant. These are linear copolymeric blocks of α-(1→4)-linked l-guluronic acid (G) and β-(1→4)-linked d-mannuronic acid (M) residues. Owing to the monosaccharide sequencing and the enzymatically governed reactions, alginates are well-known as an essential bio-polymer group for multifarious biomedical implementations. Additionally, alginate’s bio-adhesive property makes it significant in the pharmaceutical industry. Alginate has shown immense potential in wound healing and drug delivery applications to date because its gel-forming ability maintains the structural resemblance to the extracellular matrices in tissues and can be altered to perform numerous crucial functions. The initial section of this review will deliver a perception of the extraction source and alginate’s remarkable properties. Furthermore, we have aspired to discuss the current literature on alginate utilization as a biopolymeric carrier for drug delivery through numerous administration routes. Finally, the latest investigations on alginate composite utilization in wound healing are addressed.

Chitosan Nanoparticle Encapsulation of Antibacterial Essential Oils

Chitosan is the most suitable encapsulation polymer because of its natural abundance, biodegradability, and surface functional groups in the form of free NH₂ groups. The presence of NH₂ groups allows for the facile grafting of functionalized molecules onto the chitosan surface, resulting in multifunctional materialistic applications. Quaternization of chitosan's free amino is one of the typical chemical modifications commonly achieved under acidic conditions. This quaternization improves its ionic character, making it ready for ionic-ionic surface modification. Although the cationic nature of chitosan alone exhibits antibacterial activity because of its interaction with negatively-charged bacterial membranes, the nanoscale size of chitosan further amplifies its antibiofilm activity. Additionally, the researcher used chitosan nanoparticles as polymeric materials to encapsulate antibiofilm agents (such as antibiotics and natural phytochemicals), serving as an excellent strategy to combat biofilm-based secondary infections. This paper provided a summary of available carbohydrate-based biopolymers as antibiofilm materials. Furthermore, the paper focuses on chitosan nanoparticle-based encapsulation of basil essential oil (Ocimum basilicum), mandarin essential oil (Citrus reticulata), Carum copticum essential oil ("Ajwain"), dill plant seed essential oil (Anethum graveolens), peppermint oil (Mentha piperita), green tea oil (Camellia sinensis), cardamom essential oil, clove essential oil (Eugenia caryophyllata), cumin seed essential oil (Cuminum cyminum), lemongrass essential oil (Cymbopogon commutatus), summer savory essential oil (Satureja hortensis), thyme essential oil, cinnamomum essential oil (Cinnamomum zeylanicum), and nettle essential oil (Urtica dioica). Additionally, chitosan nanoparticles are used for the encapsulation of the major essential components carvacrol and cinnamaldehyde, the encapsulation of an oil-in-water nanoemulsion of eucalyptus oil (Eucalyptus globulus), the encapsulation of a mandarin essential oil nanoemulsion, and the electrospinning nanofiber of collagen hydrolysate-chitosan with lemon balm (Melissa officinalis) and dill (Anethum graveolens) essential oil.

Transmembrane transport process and endoplasmic reticulum function facilitate the role of gene cel1b in cellulase production of Trichoderma reesei

Background

A total of 11 β-glucosidases are predicted in the genome of Trichoderma reesei, which are of great importance for regulating cellulase biosynthesis. Nevertheless, the relevant function and regulation mechanism of each β-glucosidase remained unknown.

Results

We evidenced that overexpression of cel1b dramatically decreased cellulase synthesis in T. reesei RUT-C30 both at the protein level and the mRNA level. In contrast, the deletion of cel1b did not noticeably affect cellulase production. Protein CEL1B was identified to be intracellular, being located in vacuole and cell membrane. The overexpression of cel1b reduced the intracellular pNPGase activity and intracellular/extracellular glucose concentration without inducing carbon catabolite repression. On the other hand, RNA-sequencing analysis showed the transmembrane transport process and endoplasmic reticulum function were affected noticeably by overexpressing cel1b. In particular, some important sugar transporters were notably downregulated, leading to a compromised cellular uptake of sugars including glucose and cellobiose.

Conclusions

Our data suggests that the cellulase inhibition by cel1b overexpression was not due to the β-glucosidase activity, but probably the dysfunction of the cellular transport process (particularly sugar transport) and endoplasmic reticulum (ER). These findings advance the knowledge of regulation mechanism of cellulase synthesis in filamentous fungi, which is the basis for rationally engineering T. reesei strains to improve cellulase production in industry.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12934-022-01809-1.

Polymeric Biomaterials for Prevention and Therapeutic Intervention of Microbial Infections

The escalating emergence of multidrug-resistant (MDR) pathogens and their ability to colonize into biofilms on a multitude of surfaces have struck global health as a nightmare. The stagnation in the development of antibiotics and the deterioration of clinical pipelines have incited an invigorating search for smart and innovative alternatives in the scientific community. Further, a steep rise in the usage of biomedical devices and implants has resulted in an accelerated occurrence of infections. Toward the goal of mitigation of the aforementioned challenges, antimicrobial polymers have stood out as an astounding option. In this perspective, we highlight our contribution to the field of polymeric biomaterials for tackling antimicrobial resistance (AMR) and infections. Polymers inspired from antimicrobial peptides (AMPs) have been utilized as therapeutic interventions to curb MDR infections and also to rejuvenate obsolete antibiotics. Further, cationic polymers have been used to impart antimicrobial properties to different biomedical surfaces. These cationic polymer-coated surfaces can inactivate pathogens upon contact as well as prevent their biofilm formation. In addition, antimicrobial hydrogels, which are prepared from either inherently antimicrobial polymers or biocide-loaded polymeric hydrogel matrices, have also been engineered. With a brief overview of the progress in the field, detailed elaboration of the polymeric biomaterials for prevention and therapeutic intervention of microbial infections developed by our group is presented. Finally, the challenges in the field of antimicrobial polymers with discussion on the proceedings of polymeric research to alleviate these challenges are discussed.

Biocides as Biomedicines against Foodborne Pathogenic Bacteria

Biocides are currently considered the first line of defense against foodborne pathogens in hospitals or food processing facilities due to the versatility and efficiency of their chemical active ingredients. Understanding the biological mechanisms responsible for their increased efficiency, especially when used against foodborne pathogens on contaminated surfaces and materials, represents an essential first step in the implementation of efficient strategies for disinfection as choosing an unsuitable product can lead to antibiocide resistance or antibiotic–biocide cross-resistance. This review describes these biological mechanisms for the most common foodborne pathogens and focuses mainly on the antipathogen effect, highlighting the latest developments based on in vitro and in vivo studies. We focus on biocides with inhibitory effects against foodborne bacteria (e.g., Escherichia spp., Klebsiella spp., Staphylococcus spp., Listeria spp., Campylobacter spp.), aiming to understand their biological mechanisms of action by looking at the most recent scientific evidence in the field.

Host Defense Peptide-Mimicking Polymers and Polymeric-Brush-Tethered Host Defense Peptides: Recent Developments, Limitations, and Potential Success

Amphiphilic antimicrobial polymers have attracted considerable interest as structural mimics of host defense peptides (HDPs) that provide a broad spectrum of activity and do not induce bacterial-drug resistance. Likewise, surface engineered polymeric-brush-tethered HDP is considered a promising coating strategy that prevents infections and endows implantable materials and medical devices with antifouling and antibacterial properties. While each strategy takes a different approach, both aim to circumvent limitations of HDPs, enhance physicochemical properties, therapeutic performance, and enable solutions to unmet therapeutic needs. In this review, we discuss the recent advances in each approach, spotlight the fundamental principles, describe current developments with examples, discuss benefits and limitations, and highlight potential success. The review intends to summarize our knowledge in this research area and stimulate further work on antimicrobial polymers and functionalized polymeric biomaterials as strategies to fight infectious diseases.

Development of N,O-Carboxymethyl Chitosan-Starch Biomaterial Inks for 3D Printed Wound Dressing Applications

In this paper, a novel hybrid biomaterial ink consisting of two water-soluble polymers is investigated: starch and N,O-carboxymethyl chitosan (NOCC). The biomaterial ink is used to fabricate controlled release biodegradable wound dressing scaffolds via a novel low-temperature solvent (organic)-free 3D printing technique. NOCC is a variant of chitosan with a high degradation rate that can lead to an immediate release of the drugs, and starch, on the other hand, is used to alter degradation and drug release characteristics of the biomaterial. Mupirocin, a topical anti-infective, is incorporated into the biomaterial inks. Different biomaterial inks in terms of NOCC to starch ratio are prepared and characterized. Printability and rheology of the samples are investigated, and the release of mupirocin over time is quantified. The efficacy of the developed 3D printed wound dressings against Staphylococcus aureus is examined through disk diffusion assays. Increasing NOCC accelerated the release of the drug from the scaffold and led to larger zones of inhibition in the early hours of the in vitro tests; this phenomenon is correlated to the enhanced hydrophilicity of NOCC-dominated scaffolds. The drug release and the zone of inhibition are controlled by altering starch to NOCC ratio in the biomaterial ink.

Nonimmunogenic Hydrogel-Mediated Delivery of Antibiotics Outperforms Clinically Used Formulations in Mitigating Wound Infections

Treatment of chronic wound infections caused by Gram-positive bacteria such as Staphylococcus aureus is highly challenging due to the low efficacy of existing formulations, thereby leading to drug resistance. Herein, we present the synthesis of a nonimmunogenic cholic acid-glycine-glycine conjugate (A6) that self-assembles into a supramolecular viscoelastic hydrogel (A6 gel) suitable for topical applications. The A6 hydrogel can entrap different antibiotics with high efficacy without compromising its viscoelastic behavior. Activities against different bacterial species using a disc diffusion assay demonstrated the antimicrobial effect of the ciprofloxacin-loaded A6 hydrogel (CPF-Gel). Immune profiling and gene expression studies after the application of the A6 gel to mice confirmed its nonimmunogenic nature to host tissues. We further demonstrated that topical application of CPF-Gel clears S. aureus-mediated wound infections more effectively than clinically used formulations. Therefore, cholic acid-derived hydrogels are an efficacious matrix for topical delivery of antibiotics and should be explored further.

Functional hydrogels for diabetic wound management

Diabetic wounds often have a slow healing process and become easily infected owing to hyperglycemia in wound beds. Once planktonic bacterial cells develop into biofilms, the diabetic wound becomes more resistant to treatment. Although it remains challenging to accelerate healing in a diabetic wound due to complex pathology, including bacterial infection, high reactive oxygen species, chronic inflammation, and impaired angiogenesis, the development of multifunctional hydrogels is a promising strategy. Multiple functions, including antibacterial, pro-angiogenesis, and overall pro-healing, are high priorities. Here, design strategies, mechanisms of action, performance, and application of functional hydrogels are systematically discussed. The unique properties of hydrogels, including bactericidal and wound healing promotive effects, are reviewed. Considering the clinical need, stimuli-responsive and multifunctional hydrogels that can accelerate diabetic wound healing are likely to form an important part of future diabetic wound management.

Advancements in release-active antimicrobial biomaterials: A journey from release to relief

Escalating medical expenses due to infectious diseases are causing huge socioeconomic pressure on mankind globally. The emergence of antibiotic resistance has further aggravated this problem. Drug-resistant pathogens are also capable of forming thick biofilms on biotic and abiotic surfaces to thrive in a harsh environment. To address these clinical problems, various strategies including antibacterial agent delivering matrices and bactericidal coatings strategies have been developed. In this review, we have discussed various types of polymeric vehicles such as hydrogels, sponges/cryogels, microgels, nanogels, and meshes, which are commonly used to deliver antibiotics, metal nanoparticles, and biocides. Compositions of these polymeric matrices have been elaborately depicted by elucidating their chemical interactions and potential activity have been discussed. On the other hand, various implant/device-surface coating strategies which exploit the release-active mechanism of bacterial killing are discussed in elaboration. This article is categorized under: Therapeutic Approaches and Drug Discovery > Nanomedicine for Cardiovascular Disease Implantable Materials and Surgical Technologies > Nanomaterials and Implants Therapeutic Approaches and Drug Discovery > Nanomedicine for Infectious Disease.

Alginate modification via click chemistry for biomedical applications

Alginate biopolymers are characterized by favorable properties, of biocompatibility, degradability, and non-toxicity. However, the poor stability properties of alginate have limited its suitability for diverse applications. Recently, click chemistry has generated significant research interest due to its high reaction efficiency, high selectivity for a single product, harmless byproducts, and processing simplicity. Alginate modified using click chemistry enables the production of alginate derivatives with enhanced physical and chemical properties. Herein, we review the employment of click chemistry in the development of alginate-based materials or systems. Various click chemistries were highlighted, including azide and alkyne cycloaddition (e.g. Copper-(I)-catalyzed azide-alkyne cycloaddition (CuAAC), Strain-promoted alkyne-azide cycloaddition (SPAAC)), Diels-Alder reaction (Inverse electron demand Diels-Alder (IEDDA) cycloaddition, Tetrazine-norbornene Diels-Alder reactions), Thiol-ene/yne addition (Free-radical thiol-ene addition click reactions, Thiol-Michael addition click reactions, Thiol-yne addition click reaction), Oxime based click reactions, and other click reactions. Alginate functionalized with click chemistry and its properties were also discussed. The present study shows that click chemistry may be employed in modifying the mechanical strength, biochemical/biological properties of alginate-based materials. Finally, the applications of alginate-based materials in wound dressing, drug delivery, protein delivery, tissue regeneration, and 3D bioprinting were described and the future perspectives of alginates modified with click chemistry, are subsequently presented. This review provides new insights for readers to design structures and expand applications of alginate using click chemistry reactions in a detailed and more rational manner.

Dissecting Cellular Function and Distribution of β-Glucosidases in Trichoderma reesei

Trichoderma reesei has 11 putative β-glucosidases in its genome, playing key parts in the induction and production of cellulase. Nevertheless, the reason why the T. reesei genome encodes so many β-glucosidases and the distinct role each β-glucosidase plays in cellulase production remain unknown. In the present study, the cellular function and distribution of 10 known β-glucosidases (CEL3B, CEL3E, CEL3F, CEL3H, CEL3J, CEL1A, CEL3C, CEL1B, CEL3G, and CEL3D) were explored in T. reesei, leaving out BGL1 (CEL3A), which has been well investigated. We found that the overexpression of cel3b or cel3g significantly enhanced extracellular β-glucosidase production, whereas the overexpression of cel1b severely inhibited cellulase production by cellulose, resulting in nearly no growth of T. reesei. Four types of cellular distribution patterns were observed for β-glucosidases in T. reesei: (i) CEL3B, CEL3E, CEL3F, and CEL3G forming clearly separated protein secretion vesicles in the cytoplasm; (ii) CEL3H and CEL3J diffusing the whole endomembrane as well as the cell membrane with protein aggregation, like a reticular network; (iii) CEL1A and CEL3D in vacuoles; (iv) and CEL3C in the nucleus. β-glucosidases CEL1A, CEL3B, CEL3E, CEL3F, CEL3G, CEL3H, and CEL3J were identified as extracellular, CEL3C and CEL3D as intracellular, and CEL1B as unknown. The extracellular β-glucosidases CEL3B, CEL3E, CEL3F, CEL3H, and CEL3G were secreted through a tip-directed conventional secretion pathway, and CEL1A, via a vacuole-mediated pathway that was achieved without any signal peptide, while CEL3J was secreted via an unconventional protein pathway bypassing the endoplasmic reticulum (ER) and Golgi.

Advances in engineering of low molecular weight hydrogels for chemotherapeutic applications

Chemotherapy is the primary option for the treatment of cancer, inflammation, and infectious diseases. Conventional drug delivery poses solubility and bioavailability challenges, systemic toxicity, non-specific targeting, and poor accumulation of chemotherapeutic drugs at the desired site. Nanotechnology has led to the development of various nanomaterials that have decreased the toxicity and increased the accumulation of drugs at the target site. Systemic administration of nanomaterials causes burst release and non-specific targeting of chemotherapeutics, leading to off-target organ toxicity. Drug delivery based on low molecular weight hydrogels (LMWHs) provides a suitable alternative for drug delivery due to their ability to entrap chemotherapeutic drugs. Injectable and biodegradable LMWHs allow the administration of chemotherapeutics with minimal invasion, allow the sustained release of chemotherapeutic drugs for long periods, and reduce the challenges of immunogenicity and low drug entrapment efficiency. Herein, we summarize the advances in the engineering of LMWHs for controlled and prolonged delivery of chemotherapeutics for cancer, infectious diseases, and inflammatory disorders.

Nanotechnology-Based Antimicrobial and Antiviral Surface Coating Strategies

Biocontamination of medical devices and implants is a growing issue that causes medical complications and increased expenses. In the fight against biocontamination, developing synthetic surfaces, which reduce the adhesion of microbes and provide biocidal activity or combinatory effects, has emerged as a major global strategy. Advances in nanotechnology and biological sciences have made it possible to design smart surfaces for decreasing infections. Nevertheless, the clinical performance of these surfaces is highly depending on the choice of material. This review focuses on the antimicrobial surfaces with functional material coatings, such as cationic polymers, metal coatings and antifouling micro-/nanostructures. One of the highlights of the review is providing insights into the virus-inactivating surface development, which might particularly be useful for controlling the currently confronted pandemic coronavirus disease 2019 (COVID-19). The nanotechnology-based strategies presented here might be beneficial to produce materials that reduce or prevent the transmission of airborne viral droplets, once applied to biomedical devices and protective equipment of medical workers. Overall, this review compiles existing studies in this broad field by focusing on the recent related developments, draws attention to the possible activity mechanisms, discusses the key challenges and provides future recommendations for developing new, efficient antimicrobial and antiviral surface coatings.

Quaternary Lipophilic Chitosan and Gelatin Cross-Linked Antibacterial Hydrogel Effectively Kills Multidrug-Resistant Bacteria with Minimal Toxicity toward Mammalian Cells

Wounds or tissue openings in the skin are susceptible to bacterial attack, which can deteriorate and slow down the healing process. In this regard, antimicrobial gels are valuable as they mitigate the infection spread and assist in the healing. Despite the success, commercially available release-active antimicrobial gels suffer from narrow-spectrum activity, resistance induction, reservoir exhaustion, and in some cases may be associated with toxicity. To circumvent these limitations, herein, we have developed new quaternary lipophilic chitosan derivatives (QuaChi) synthesized by modifying the primary alcohol of the sugar moieties without altering the free amino groups of glucosamines. Compared to protonated chitosan, the synthesized derivatives exhibited improved water solubility and enhanced antibacterial activity against multidrug-resistant Gram-positive and Gram-negative bacteria including clinical isolates. The enhanced antibacterial activity was evident from the bacterial membrane depolarization leading to rapid inactivation of ∼10⁵-10⁶ bacterial cells within 2 h. The applicability of the chitosan derivatives was further demonstrated by developing antibacterial hydrogels by cross-linking the free amino groups of QuaChi with biocompatible gelatin through amide linkages. The hydrogel showed ∼5-7 log reduction of various multidrug-resistant bacteria including the stationary-phase cells within 6 h. Scanning electron microscopy revealed the loss of integrity of the bacterial structure when treated with the hydrogel, whereas mammalian cells (human embryonic kidney-293 (HEK-293)), when exposed to the hydrogel, appeared to be healthy with retained morphology. Collectively, these findings suggest that the developed hydrogel formulation can find potential applications to combat notorious drug-resistant bacterial infections in the healthcare settings.

Covalently Immobilized Battacin Lipopeptide Gels with Activity against Bacterial Biofilms

Novel antibiotic treatments are in increasing demand to tackle life-threatening infections from bacterial pathogens. In this study, we report the use of a potent battacin lipopeptide as an antimicrobial gel to inhibit planktonic and mature biofilms of S. aureus and P. aeruginosa. The antimicrobial gels were made by covalently linking the N-terminal cysteine containing lipopeptide (GZ3.163) onto the polyethylene glycol polymer matrix and initiating gelation using thiol-ene click chemistry. The gels were prepared both in methanol and in water and were characterised using rheology, Fourier transform infrared (FT-IR) spectroscopy and scanning electron microscopy (SEM). Antibacterial and antibiofilm analyses revealed that the gels prepared in methanol have better antibacterial and antibiofilm activity. Additionally, a minimum peptide content of 0.5 wt% (relative to polymer content) is required to successfully inhibit the planktonic bacterial growth and disperse mature biofilms of P. aeruginosa and S. aureus. The antibacterial activity of these lipopeptide gels is mediated by a contact kill mechanism of action. The gels are non-haemolytic against mouse red blood cells and are non-cytotoxic against human dermal fibroblasts. Findings from this study show that battacin lipopeptide gels have the potential to be developed as novel topical antibacterial agents to combat skin infections, particularly caused by S. aureus.

Antibacterial hydrogel coating: Strategies in surface chemistry

Hydrogels have emerged as promising antimicrobial materials due to their unique three-dimensional structure, which provides sufficient capacity to accommodate various materials, including small molecules, polymers and particles. Coating substrates with antibacterial hydrogel layers has been recognized as an effective strategy to combat bacterial colonization. To prevent possible delamination of hydrogel coatings from substrates, it is crucial to attach hydrogel layers via stronger links, such as covalent bonds. To date, various surface chemical strategies have been developed to introduce hydrogel coatings on different substrates. In this review, we first give a brief introduction of the major strategies for designing antibacterial coatings. Then, we summarize the chemical methods used to fix the antibacterial hydrogel layer on the substrate, which include surface-initiated graft crosslinking polymerization, anchoring the hydrogel layer on the surface during crosslinking, and chemical crosslinking of layer-by-layer coating. The reaction mechanisms of each method and matched pretreatment strategies are systemically documented with the aim of introducing available protocols to researchers in related fields for designing hydrogel-coated antibacterial surfaces.

Natural Polymer-Based Antimicrobial Hydrogels without Synthetic Antibiotics as Wound Dressings

Wound healing is usually accompanied by bacterial infection. The excessive use of synthetic antibiotics leads to drug resistance, posing a significant threat to human health. Hydrogel-based wound dressings aimed at mitigating bacterial infections have emerged as an effective wound treatment. The review presented herein particularly focuses on the hydrogels originating from natural polymers. To further enhance the performance of wound dressings, various strategies and approaches have been developed to endow the hydrogels with excellent broad-spectrum antibacterial activity. Those that are summarized in the current review are the hydrogels with intrinsic or stimuli-triggered bactericidal properties and others that serve as vehicles for loading antibacterial agents without synthetic antibiotics. Specific attention is paid to antimicrobial mechanisms and the antibacterial performance of hydrogels. Practical antibacterial applications to accelerate the wound healing employing these antibiotic-free hydrogels are also introduced along with the discussion on the current challenges and perspectives leading to new technologies.

Dextran methacrylate hydrogel microneedles loaded with doxorubicin and trametinib for continuous transdermal administration of melanoma

Microneedles (MNs) technology has many advantages and is an ideal local transdermal drug delivery method. Here we synthesized photocrosslinkable dextran methacrylate (DexMA), and its degree of substitution is 5 % higher than the previous method. We used DexMA hydrogel for the first time to develop a new type of MNs for continuous transdermal administration. The prepared hydrogel MNs can successfully penetrate the epidermal layer and achieve sustained drug release. Doxorubicin (DOX) and trametinib (Tra) are anticancer drugs approved by FDA. Besides, Tra can also reverse P-gp-mediated multidrug resistance (MDR) to effectively block the efflux of DOX by P-gp. We used MNs to simultaneously load Tra and DOX, and achieved synergy in a B16 cell xenograft nude mouse model. The DexMA hydrogel MNs developed in this study can be used to enhance the transdermal delivery of small molecule drugs and reduce systemic toxicity and side effects.

Smart, Photothermally Activated, Antibacterial Surfaces with Thermally Triggered Bacteria-Releasing Properties

The development of effective antibacterial surfaces to prevent the attachment of pathogenic bacteria and subsequent bacterial colonization and biofilm formation is critically important for medical devices and public hygiene products. In the work reported herein, a smart antibacterial hybrid film based on tannic acid/Fe³⁺ ion (TA/Fe) complex and poly(N-isopropylacrylamide) (PNIPAAm) is deposited on diverse substrates. This surface is shown to have bacteria-killing and bacteria-releasing properties based on, respectively, near-infrared photothermal activation and subsequent cooling. The TA/Fe complex has three roles in this system: (i) as a universal adhesive "anchor" for surface modification, (ii) as a high-efficiency photothermal agent for ablation of attached bacteria (including multidrug resistant bacteria), and (iii) as a robust linker for immobilization of NH₂-terminated PNIPAAm via either Michael addition or Schiff base formation. Moreover, because of the thermoresponsive properties of the immobilized PNIPAAm, almost all of the killed bacteria and other debris can be removed from the surface simply by lowering the temperature. It is shown that this hybrid film can maintain good antibacterial performance after being used for multiple "kill-and-release" cycles and can be applied to various substrates regardless of surface chemistry or topography, thus providing a broadly applicable, simple, and reliable solution to the problems associated with surface-attached bacteria in various healthcare applications.

Alginate-based composite materials for wound dressing application:A mini review

Alginate biopolymer has been used in the design and development of several wound dressing materials in order to improve the efficiency of wound healing. Mainly, alginate improves the hydrophilic nature of wound dressing materials in order to create the required moist wound environment, remove wound exudate and increase the speed of skin recovery of the wound. In addition, alginate can easily cross-link with other organic and inorganic materials and they can promote wound healing in clinical applications. This review article addresses the importance of alginates and the roles of derivative polymeric materials in wound dressing biomaterials. Additionally, studies on recent alginate-based wound dressing materials are discussed.

Charge-Switchable Polymeric Coating Kills Bacteria and Prevents Biofilm Formation in Vivo

Preventing bacterial biofilm formation on medical devices and implants in vivo still remains a daunting task. Current antibacterial coatings to combat implant-associated infections are generally composed of toxic metals or nondegradable polymers and involve multistep surface modifications. Here, we present a charge-switchable antibacterial and antibiofilm coating based on water-insoluble cationic hydrophobic polymers that are soluble in organic solvents and can be noncovalently coated onto different surfaces. Toward this, a library of quaternary polyethylenimine (QPEI) polymers with an amide or ester group in their pendant alkyl chain was developed. These QPEIs are shown to hydrolyze from active cationic to nontoxic zwitterionic polymers under acidic or enzymatic conditions. Notably, polymers with both zwitterionic and cationic groups, obtained upon partial hydrolysis of QPEIs, are shown to retain their antibacterial activity with much lower toxicity toward mammalian cells. Furthermore, the zwitterionic polymer, a fully hydrolyzed product of the QPEIs, is shown to be nontoxic to mammalian cells in vitro as well as in vivo. The QPEIs, when coated onto surfaces, kill bacteria and prevent formation of biofilms. In an in vivo mice model, the QPEI-coated medical grade catheter is shown to reduce methicillin-resistant Staphylococcus aureus contamination both on the catheter surface and in the adjacent tissues (99.99% reduction compared to a noncoated catheter). Additionally, biofilm formation is inhibited on the catheter surface with negligible inflammation in the adjacent tissue. The above results thus highlight the importance of these polymers to be used as effective antibacterial coatings in biomedical applications.

Structure-function relationships of nonviral gene vectors: Lessons from antimicrobial polymers

In recent years, substantial advances have been achieved in the design and synthesis of nonviral gene vectors. However, lack of effective and biocompatible vectors still remains a major challenge that hinders their application in clinical settings. In the past decade, there has been a rapid expansion of cationic antimicrobial polymers, due to their potent, rapid, and broad-spectrum biocidal activity against resistant microbes, and biocompatible features. Given that antimicrobial polymers share common features with nonviral gene vectors in various aspects, such as membrane affinity, functional groups, physicochemical characteristics, and unique macromolecular architectures, these polymers may provide us with inspirations to overcome challenges in the design of novel vectors toward more safe and efficient gene delivery in clinic. Building off these observations, we provide here an overview of the structure-function relationships of polymers for both antimicrobial applications and gene delivery by elaborating some key structural parameters, including functional groups, charge density, hydrophobic/hydrophilic balance, MW, and macromolecular architectures. By borrowing a leaf from antimicrobial agents, great advancement in the development of newer nonviral gene vectors with high transfection efficiency and biocompatibility will be more promising. STATEMENT OF SIGNIFICANCE: The development of gene delivery is still in the preclinical stage for the lack of effective and biocompatible vectors. Given that antimicrobial polymers share common features with gene vectors in various aspects, such as membrane affinity, functional groups, physicochemical characteristics, and unique macromolecular architectures, these polymers may provide us with inspirations to overcome challenges in the design of novel vectors toward more safe and efficient gene delivery in clinic. In this review, we systematically summarized the structure-function relationships of antimicrobial polymers and gene vectors, with which the design of more advanced nonviral gene vectors is anticipated to be further boosted in the future.

Recent Progress in Polymer Research to Tackle Infections and Antimicrobial Resistance

Global health is increasingly being threatened by the rapid emergence of drug-resistant microbes. The ability of these microbes to form biofilms has further exacerbated the scenario leading to notorious infections that are almost impossible to treat. For addressing this clinical threat, various antimicrobial polymers, polymer-based antimicrobial hydrogels and polymer-coated antimicrobial surfaces have been developed in the recent past. This review aims to discuss such polymer-based antimicrobial strategies with a focus on their current advancement in the field. Antimicrobial polymers, whose designs are inspired from antimicrobial peptides (AMPs), are described with an emphasis on structure-activity analysis. Additionally, antibiofilm activity and in vivo efficacy are delineated to elucidate the real potential of these antimicrobial polymers as possible therapeutics. Antimicrobial hydrogels, prepared from either inherently antimicrobial polymers or biocide-loaded into polymer-derived hydrogel matrix, are elaborated followed by various strategies to engineer polymer-coated antimicrobial surfaces. In the end, the current challenges are accentuated along with future directions for further expansion of the field toward tackling infections and antimicrobial resistance.

Synthesis, Self-Assembly, and Biomedical Applications of Antimicrobial Peptide-Polymer Conjugates

Antimicrobial peptides (AMPs) have been attracting much attention due to their excellent antimicrobial efficiency and low rate in driving antimicrobial resistance (AMR), which has been increasing globally to alarming levels. Conjugation of AMPs into functional polymers not only preserves excellent antimicrobial activities but reduces the toxicity and offers more functionalities, which brings new insight toward developing multifunctional biomedical materials such as hydrogels, polymer vesicles, polymer micelles, and so forth. These nanomaterials have been exhibiting excellent antimicrobial activity against a broad spectrum of bacteria including multidrug-resistant (MDR) ones, high selectivity, and low cytotoxicity, suggesting promising potentials in wound dressing, implant coating, antibiofilm, tissue engineering, and so forth. This Perspective seeks to highlight the state-of-the-art strategy for the synthesis, self-assembly, and biomedical applications of AMP-polymer conjugates and explore the promising directions for future research ranging from synthetic strategies, multistage and stimuli-responsive antibacterial activities, antifungi applications, and potentials in elimination of inflammation during medical treatment. It also will provide perspectives on how to stem the remaining challenges and unresolved problems in combating bacteria, including MDR ones.

New Perspectives in Biofilm Eradication

Microbial biofilms, which are elaborate and highly resistant microbial aggregates formed on surfaces or medical devices, cause two-thirds of infections and constitute a serious threat to public health. Immunocompromised patients, individuals who require implanted devices, artificial limbs, organ transplants, or external life support and those with major injuries or burns, are particularly prone to become infected. Antibiotics, the mainstay treatments of bacterial infections, have often proven ineffective in the fight against microbes when growing as biofilms, and to date, no antibiotic has been developed for use against biofilm infections. Antibiotic resistance is rising, but biofilm-mediated multidrug resistance transcends this in being adaptive and broad spectrum and dependent on the biofilm growth state of organisms. Therefore, the treatment of biofilms requires drug developers to start thinking outside the constricted "antibiotics" box and to find alternative ways to target biofilm infections. Here, we highlight recent approaches for combating biofilms focusing on the eradication of preformed biofilms, including electrochemical methods, promising antibiofilm compounds and the recent progress in drug delivery strategies to enhance the bioavailability and potency of antibiofilm agents.

Recent developments in smart antibacterial surfaces to inhibit biofilm formation and bacterial infections

Since their development over 70 years, antibiotics are still the most effective strategy to treat bacterial biofilms and infections.

Bacterial self-defense antibiotics release from organic-inorganic hybrid multilayer films for long-term anti-adhesion and biofilm inhibition properties

Implant-associated bacterial infections pose serious medical and financial issues due to the colonization and proliferation of pathogens on the surface of the implant. The as-prepared traditional antibacterial surfaces can neither resist bacterial adhesion nor inhibit the development of biofilm over the long term. Herein, novel (montmorillonite/poly-l-lysine-gentamicin sulfate)8 ((MMT/PLL-GS)8) organic-inorganic hybrid multilayer films were developed to combine enzymatic degradation PLL for on-demand self-defense antibiotics release. Small molecule GS was loaded into the multilayer films during self-assembly and the multilayer films showed pH-dependent and linear growth behavior. The chymotrypsin- (CMS) and bacterial infections-responsive film degradation led to the peeling of the films and GS release. Enzyme-responsive GS release exhibited CMS concentration dependence as measured by the size of the inhibition zone and SEM images. Notably, the obtained antibacterial films showed highly efficient bactericidal activity which killed more than 99.9% of S. aureus in 12 h. Even after 3 d of incubation in S. aureus, E. coli or S. epidermidis solutions, the multilayer films exhibited inhibition zones of more than 1.5 mm in size. Both in vitro and in vivo antibacterial tests indicated good cell compatibility, and anti-inflammatory, and long-term bacterial anti-adhesion and biofilm inhibition properties.