General Strategy for Controlled Synthesis of NixPy/Carbon and Its Evaluation as a Counter Electrode Material in Dye-Sensitized Solar Cells

Time series-based prediction of antibiotic degradation via photocatalysis using ensemble gradient boosting

This study aims to evaluate the effectiveness of the laboratory-made catalyst Ni2P-ZrO2 (NPZ) in the degradation of an antibiotic in an aqueous suspension when exposed to ultraviolet (UV) light. The degradation of amoxicillin (AMX) was predicted using time series forecasting through the ensemble gradient boosting model. The degradation experiments were conducted utilizing two distinct photocatalyst compositions of Nickel phosphide-zirconium dioxide (NPZ) in the proportions of 1:9 and 2:8. The most effective experimental results were obtained using a natural pH, a catalyst concentration of 0.20 g/L and reaction duration of 0.5 h after testing the different catalysts. Experimental data were used for training, validating and confirming time series predictions. The use of ensemble technique highly affected the experimental findings. The model's performance was quite satisfactory in terms of correlation coefficient (94.00%), normalized mean square error (0.01) and mean square root error (0.0911) which significantly contributed to the model's accuracy. All input variables, such as pH, catalyst dose and irradiation time, had a significant impact on the degrading efficacy. The study has demonstrated that time series forecasting can be used for predicting the degradation process precisely.

White Latex: Appealing "Green" Alternative for PVdF in Electrode Manufacturing for Sustainable Li-Ion Batteries

Nowadays, poly(vinylidene fluoride) (PVdF) has been dominantly utilized as a polymeric binder in commercialized Li-ion batteries. However, standardized PVdF-based electrode manufacturing seems cost-intensive and environmentally hazardous, which relies on the usage of toxic N-methyl-2-pyrrolidone (NMP) as a dispersant. In view of cost control and environmental awareness, switching to a water-processable green binder, as a substitute for PVdF, has been imperative with realistic significance. Herein, commercially available white latex (WL), containing poly(vinyl acetate) as a staple ingredient, was directly used as an alternative aqueous binder for PVdF in the fabrication of graphite/Li₄Ti₅O₁₂-based lithium-ion anodes. WL exhibits robust adhesion of the electrode coating to the current collector; meanwhile, the restricted electrolyte swelling of the binder is verified by in situ electrochemical dilatometry. Outperforming PVdF, WL endows graphite with extensive surface coverage by the binding agent, dramatically reducing irreversible decomposition of the electrolyte (SEI formation) on graphite. Consequently, the WL-based graphite anode delivers the highest initial coulombic efficiency (CE) of 92% and remarkable long cyclic stability with a high capacity retention of 332.7 mAh/g, compared to the PVdF- and carboxymethyl cellulose (CMC)-based ones. Moreover, WL is also compatible with Li₄Ti₅O₁₂, endowing it with more stable cycling behavior than that of the counterparts prepared with both PVdF and even CMC. Our described WL represents an appealing "green" alternative for PVdF in manufacturing sustainable and ecofriendly energy storage devices.

Carbon nanotubes: functionalisation and their application in chemical sensors

Carbon nanotubes (CNTs) have been recognised as a promising material in a wide range of applications, from safety to energy-related devices. However, poor solubility in aqueous and organic solvents has hindered the utilisation and applications of carbon nanotubes. As studies progressed, the methodology for CNTs dispersion was established. The current state of research in CNTs either single wall or multiwall/polymer nanocomposites has been reviewed in context with the various types of functionalisation presently employed. Functionalised CNTs have been playing an increasingly central role in the research, development, and application of carbon nanotube-based nanomaterials and systems. The extremely high surface-to-volume ratio, geometry, and hollow structure of nanomaterials are ideal for the adsorption of gas molecules. This offers great potential applications, such as in gas sensor devices working at room temperature. Particularly, the advent of CNTs has fuelled the invention of CNT-based gas sensors which are very sensitive to the surrounding environment. The presence of O2, NH3, NO2 gases and many other chemicals and molecules can either donate or accept electrons, resulting in an alteration of the overall conductivity. Such properties make CNTs ideal for nano-scale gas-sensing materials. Conductive-based devices have already been demonstrated as gas sensors. However, CNTs still have certain limitations for gas sensor application, such as a long recovery time, limited gas detection, and weakness to humidity and other gases. Therefore, the nanocomposites of interest consisting of polymer and CNTs have received a great deal of attention for gas-sensing application due to higher sensitivity over a wide range of gas concentrations at room temperature compared to only using CNTs and the polymer of interest separately.

Transparent Cobalt Selenide/Graphene Counter Electrode for Efficient Dye-Sensitized Solar Cells with Co2+/3+-Based Redox Couple

In this study, we demonstrate a facile, one-pot, and low-temperature (∼85 °C) chemical bath method for the preparation of a composite of cobalt selenide/graphene (Co_0.85Se/Gr) as the electrocatalyst for the counter electrode (CE) of dye-sensitized solar cells (DSSCs) with a cobalt-based electrolyte. The Co_0.85Se/Gr composite film was envisaged to have the advantages of both components, that is, the high electrochemical surface area of Co_0.85Se and the straight paths for electron transfer from Gr. The DSSCs with Co_0.85Se/Gr exhibited a power conversion efficiency (η) of 11.26%. According to the results of the rotating disk electrode, the film of Co_0.85Se/Gr showed a high electrocatalytic surface area (A_e) and an extremely large intrinsic heterogeneous rate constant (k₀). Furthermore, the composite film of Co_0.85Se/Gr exhibits a high transparency in the wavelength region of 400-800 nm (>82%), which implied that the corresponding electrode shall be a potential CE in rear-side illuminated DSSCs. The photovoltaic parameters of the DSSCs with Pt, Co_0.85Se, Gr, and Co_0.85Se/Gr were obtained for rear-side illumination and additionally for front- and rear-side illuminations (AM 1.5, 100 mW/cm²) using different electrolytes. As the cobalt-based electrolyte of [Co(bpy)₃]^2+/3+ exhibited a low light absorption and low overpotential for dye regeneration, a rear-side illuminated DSSC with a cobalt-based electrolyte showed the highest efficiency of 9.43 ± 0.02%, which is greater than that of the DSSC with an I^-/I₃^--based electrolyte (η = 7.63 ± 0.04%).

An all carbon dye sensitized solar cell: A sustainable and low-cost design for metal free wearable solar cell devices

Lightweight carbon electrodes are the new candidates for photovoltaic devices due to their temperature resistivity, ease of fabrication, and skin comfortability. Herein, a sustainable and facile strategy has been proposed for metal free all carbon dye sensitized solar cell (C-DSSC), assembled by stacking carbon front electrode (CFE) and carbon counter electrode (CCE). The CFE demonstrated adequate light transmittance (70-50%) while maintaining efficient photon absorption and charge separation mechanism due to dye coated TiO₂ nanorods (P25-R). The graphene dip coated carbon counter electrode (Gr@CCE) possesses remarkable electro catalytic activity towards I₃^-/I^- redox couple with low charge transfer resistance (R_CT = 0.79 Ω). The sustainable design of C-DSSC attained ~6 ± 0.5% efficiency with high photocurrent density of 18.835 mA. cm^-2. The superior performance of C-DSSC is accredited to its improved charge mobility, low internal resistance, and better interfacial electrode contact. The thickness of C-DSSC is ≤3 mm eliminates the need for rigid glass in DSSC.

Efficiency and stability enhancement of perovskite solar cells using reduced graphene oxide derived from earth-abundant natural graphite

Graphene – two-dimensional (2D) sheets of carbon atoms linked in a honeycomb pattern – has unique properties that exhibit great promise for various applications including solar cells. Herein we prepared two-dimensional (2D) reduced graphene oxide (rGO) nanosheets from naturally abundant graphite flakes (obtained from Tuv aimag in Mongolia) using solution processed chemical oxidation and thermal reduction methods. As a proof of concept, we used our rGO as a hole transporting material (HTM) in perovskite solar cells (PSCs). Promisingly, the use of rGO in the hole transporting layer (HTL) not only enhanced the photovoltaic efficiency of PSCs, but also improved the device stability. In particular, the best performing PSC employing rGO nanosheets exhibited a power conversion efficiency (PCE) of up to 18.13%, while the control device without rGO delivered a maximum efficiency of 17.26%. The present work demonstrates the possibilities for solving PSC issues (stability) using nanomaterials derived from naturally abundant graphite sources.

Solution processed reduced graphene oxide nanosheets have been prepared from naturally abundant graphite flakes and used to enhance the efficiency and stability of perovskite solar cells.

Enhanced Synergetic Catalytic Effect of Mo2C/NCNTs@Co Heterostructures in Dye-Sensitized Solar Cells: Fine-Tuned Energy Level Alignment and Efficient Charge Transfer Behavior

A highly efficient and stable electrocatalyst with the novel heterostructure of Co-embedded and N-doped carbon nanotubes supported Mo₂C nanoparticles (Mo₂C/NCNTs@Co) is creatively constructed by adopting the one-step metal catalyzed carbonization-nitridation strategy. Systematic characterizations and density functional theory (DFT) calculations reveal the advanced structural and electronic properties of Mo₂C/NCNTs@Co heterostructure, in which the Co-embedded and N-doped CNTs with tunable diameters present electron-donating effect and the work function is correspondingly regulated from 4.91 to 4.52 eV, and the size-controlled Mo₂C nanoparticles exhibit Pt-like 4d electronic structure and the well matched work function (4.85 eV) with I^-/I₃^- redox couples (4.90 eV). As a result, the conductive NCNTs@Co substrate with fine-tuned energy level alignment accelerates the electron transportation and the electron migration from NCNTs@Co to Mo₂C, and the active Mo₂C shows high affinity for I₃^- adsorption and high charge transfer ability for I₃^- reduction, which reach a decent synergetic catalytic effect in Mo₂C/NCNTs@Co heterostructure. The DSSC with Mo₂C/NCNTs@Co CE achieves a high photoelectric conversion efficiency of 8.82% and exceptional electrochemical stability with a residual efficiency of 7.95% after continuous illumination of 200 h, better than Pt-based cell. Moreover, the synergistic catalytic mechanism toward I₃^- reduction is comprehensively studied on the basis of structure-activity correlation and DFT calculations. The advanced heterostructure engineering and electronic modulation provide a new design principle to develop the efficient, stable, and economic hybrid catalysts in relevant electrocatalytic fields.

Phosphate microbial mineralization removes nickel ions from electroplating wastewater

Nickel ions in electroplating wastewater can be removed by the bio-mineralization method. Bacillus subtilis can produce alkaline phosphatase, which hydrolyzes organophosphate monoesters and produces phosphate ions. Fourier-transform infrared spectroscopy (FTIR) showed that the precipitated material contains phosphate ions. X-ray diffraction (XRD) showed that nickel ions in electroplating wastewater react with Bacillus subtilis and organophosphate monoesters to obtain nickel phosphate octahydrate (Ni₃(PO₄)₂·8H₂O). The removal efficiency of nickel ions could reach 76.41% with the optimum content of the organophosphate monoester (0.02 mol), Bacillus subtilis powder (2 g), pH (6), standing time (36 h), and reaction temperature (25 °C) in the medium solution (100 mL). The average particle size of Ni₃(PO₄)₂·8H₂O was 80.51 nm, which was calculated by the Scherrer formula. The Lorentz-Transmission Electron Microscope (L-TEM) further showed that Ni₃(PO₄)₂·8H₂O was composed of clusters of irregular nanoparticles, and the individual particle size was in the range of 40-90 nm. The TGA curve shows that the mass loss of crystal water was 25.45%, which was close to the theoretical total mass loss of 28.24% in bio-Ni₃(PO₄)₂·8H₂O.

Three-dimensional graphene networks and RGO-based counter electrode for DSSCs

Graphene is considered to be a potential replacement for the traditional Pt counter electrode (CE) in dye-sensitized solar cells (DSSCs). Besides a high electron transport ability, a close contact between the CE and electrolyte is crucial to its outstanding catalytic activity for the I3 -/I redox reaction. In this study, reduced graphene oxide (RGO) and three-dimensional graphene networks (3DGNs) were used to fabricate the CE, and the graphene-based CE endowed the resulting DSSC with excellent photovoltaic performance features. The high quality and continuous structure of the 3DGNs provided a channel amenable to fast transport of electrons, while the RGO afforded a close contact at the interface between the graphene basal plane and electrolyte. The obtained energy conversion efficiency (η) was closely related to the mass fraction and reduction degree of the RGO that was used. Corresponding optimization yielded, for the DSSCs based on the 3DGN-RGO CE, a value of η as high as 9.79%, comparable to that of the device using a Pt CE and hence implying promising prospects for the as-prepared CE.

Highly Efficient Zn-Cu-In-Se Quantum Dot-Sensitized Solar Cells through Surface Capping with Ascorbic Acid

The balance between band structure, composition, and defect is essential for improving the optoelectronic properties of ternary and quaternary quantum dots and the corresponding photovoltaic performance. In this work, ascorbic acid (AA) as capping ligand is introduced into the reaction system to prepare green Zn-Cu-In-Se (ZCISe) quantum dots. Results show that the addition of AA can increase the Zn content while decrease the In content, resulting in enlarged band gap, high conduction band energy level, and suppressed charge recombination. When AA/Cu ratio is 1, the quantum dots possess the largest band gap of 1.49 eV and the assembled quantum dot-sensitized solar cells exhibit superior photovoltaic performance with ∼17% increment mainly contributed by the dramatically increased current density. The new record efficiencies of 10.44 and 13.85% are obtained from the ZCISe cells assembled with brass and titanium mesh-based counter electrodes, respectively.

Nanoarchitectures in dye-sensitized solar cells: metal oxides, oxide perovskites and carbon-based materials

Dye-sensitized solar cells (DSSCs) have aroused great interest and been regarded as a potential renewable energy resource among the third-generation solar cell technologies to fulfill the 21^st century global energy demand. DSSCs have notable advantages such as low cost, easy fabrication process and being eco-friendly in nature. The progress of DSSCs over the last 20 years has been nearly constant due to some limitations, like poor long-term stability, narrow absorption spectrum, charge carrier transportation and collection losses and poor charge transfer mechanism for regeneration of dye molecules. The main challenge for the scientific community is to improve the performance of DSSCs by using different approaches, like finding new electrode materials with suitable nanoarchitectures, dyes in composition with promising semiconductors and metal quantum dot fluorescent dyes, and cost-effective hole transporting materials (HTMs). This review focuses on DSSC photo-physics, which includes charge separation, effective transportation, collection and recombination processes. Different nanostructured materials, including metal oxides, oxide perovskites and carbon-based composites, have been studied for photoanodes, and counter electrodes, which are crucial to achieve DSSC devices with higher efficiency and better stability.

Enhanced electrocatalytic performance of nickel diselenide grown on graphene toward the reduction of triiodide redox couples

The promising activity of nickel diselenide (NiSe₂) towards electrocatalysis has made it especially attractive in energy conversion fields. However, NiSe₂ with high electrocatalytic performance always requires complicated fabrication or expensive conductive polymers, resulting in the scale-up still being challenging. Herein, we introduce a simple and cost-effective synthesis of NiSe₂ dispersed on the surface of graphene (NiSe₂/RGO NPs). NiSe₂/RGO NPs exhibited enhanced electrocatalytic performance and long-term stability for the reduction reaction of triiodide redox couples in dye-sensitized solar cells (DSSCs). Leveraging the advantageous features, the DSSC fabricated with NiSe₂/RGO NPs as CE had a smaller charge-transfer resistance (R_ct) value and higher short-circuit current density and fill factor than naked NiSe₂ NPs. Additionally, NiSe₂/RGO NPs achieved a PCE of 7.76%, higher than that of pure NiSe₂ (6.51%) and even exceeding that of Pt (7.56%). These prominent features demonstrated that the NiSe₂/RGO NPs in this work are a promising cheap and efficient electrocatalyst to replace state-of-the-art Pt.

The promising activity of nickel diselenide (NiSe₂) towards electrocatalysis has made it especially attractive in energy conversion fields.