Bioinspired 3D Multilayered Shape Memory Scaffold with a Hierarchically Changeable Micropatterned Surface for Efficient Vascularization

Incorporation of Controlled Release Systems Improves the Functionality of Biodegradable 3D Printed Cardiovascular Implants

New horizons in cardiovascular research are opened by using 3D printing for biodegradable implants. This additive manufacturing approach allows the design and fabrication of complex structures according to the patient's imaging data in an accurate, reproducible, cost-effective, and quick manner. Acellular cardiovascular implants produced from biodegradable materials have the potential to provide enough support for in situ tissue regeneration while gradually being replaced by neo-autologous tissue. Subsequently, they have the potential to prevent long-term complications. In this Review, we discuss the current status of 3D printing applications in the development of biodegradable cardiovascular implants with a focus on design, biomaterial selection, fabrication methods, and advantages of implantable controlled release systems. Moreover, we delve into the intricate challenges that accompany the clinical translation of these groundbreaking innovations, presenting a glimpse of potential solutions poised to enable the realization of these technologies in the realm of cardiovascular medicine.

Near-Infrared Remotely Controllable Shape Memory Biodegradable Occluder Based on Poly(l-lactide-co-ε-caprolactone)/Gold Nanorod Composite

Biodegradable occluders, which can efficiently eliminate the complications caused by permanent foreign implants, are considered to be the next-generation devices for the interventional treatment of congenital heart disease. However, the controllability of the deployment process of degradable occluders remains a challenge. In this work, a near-infrared (NIR) remotely controllable biodegradable occluder is explored by integrating poly(l-lactide-co-ε-caprolactone) (PLCL) with poly(ethylene glycol)-modified gold nanorods (GNR/PEG). The caprolactone structural units can effectively increase the toughness of poly(l-lactide) and reduce the shape-memory transition temperature of the occluder to a more tissue-friendly temperature. Gold nanorods endow the PLCL-GNR/PEG composite with an excellent photothermal effect. The obtained occluder can be easily loaded into a catheter for transport and spatiotemporally expanded under irradiation with near-infrared light to block the defect site. Both in vitro and in vivo biological experiments showed that PLCL-GNR/PEG composites have good biocompatibility, and the PEGylated gold nanorods could improve the hemocompatibility of the composites to a certain extent by enhancing their hydrophilicity. As a thermoplastic shape-memory polymer, PLCL-GNR/PEG can be easily processed into various forms and structures for different patients and lesions. Therefore, PLCL-GNR/PEG has the potential to be considered as a competitive biodegradable material not only for occluders but also for other biodegradable implants.

In vivo self-assembled shape-memory polyurethane for minimally invasive delivery and therapy

Advanced elastomers are highly in demand for the fabrication of medical devices for minimally invasive surgery (MIS). Herein, a shape memory and self-healing polyurethane (PCLUSe) composed of semi-crystalline poly(ε-caprolactone) (PCL) segments and interchangeable and antioxidative diselenide bonds was designed and synthesized. The excellent shape memory of PCLUSe contributed to the smooth MIS operation, leading to less surgical wounds than in the case of sternotomy. The diselenide bonds of PCLUSe contributed to the rapid self-healing under 405 nm irradiation within 60 s, and the alleviation of tissue oxidation post injury. After being delivered through a 10 mm diameter trocar onto a beating canine heart by MIS, two shape-recovered PCLUSe films self-assembled (self-healing) into a larger single patch (20 × 10 × 0.2 mm3) under the trigger of laser irradiation in situ, which could efficiently overcome the limited-size problem within MIS and meet a larger treatment area. The diselenide bonds in the PCLUSe cardiac patches protected the myocardium under oxidative stress post myocardial infarction (MI), and significantly maintained the cardiac functions.

Biomimetic tri-layered small-diameter vascular grafts with decellularized extracellular matrix promoting vascular regeneration and inhibiting thrombosis with the salidroside

Small-diameter vascular grafts (SDVGs) are urgently required for clinical applications. Constructing vascular grafts mimicking the defining features of native arteries is a promising strategy. Here, we constructed a tri-layered vascular graft with a native artery decellularized extracellular matrix (dECM) mimicking the component of arteries. The porcine thoracic aorta was decellularized and milled into dECM powders from the differential layers. The intima and media dECM powders were blended with poly (L-lactide-co-caprolactone) (PLCL) as the inner and middle layers of electrospun vascular grafts, respectively. Pure PLCL was electrospun as a strengthening sheath for the outer layer. Salidroside was loaded into the inner layer of vascular grafts to inhibit thrombus formation. In vitro studies demonstrated that dECM provided a bioactive milieu for human umbilical vein endothelial cell (HUVEC) extension adhesion, proliferation, migration, and tube-forming. The in vivo studies showed that the addition of dECM could promote endothelialization, smooth muscle regeneration, and extracellular matrix deposition. The salidroside could inhibit thrombosis. Our study mimicked the component of the native artery and combined it with the advantages of synthetic polymer and dECM which provided a promising strategy for the design and construction of SDVGs.

Percutaneous delivery and degradation of a shape memory elastomer poly(glycerol dodecanedioate) in porcine pulmonary arteries

Shape memory biodegradable elastomers are an emergent class of biomaterials well-suited for percutaneous cardiovascular repair requiring nonlinear elastic materials with facile handling. We have previously developed a chemically crosslinked shape memory elastomer, poly (glycerol dodecanedioate) (PGD), exhibiting tunable transition temperatures around body temperature (34-38 °C), exhibiting nonlinear elastic properties approximating cardiac tissues, and favorable degradation rates in vitro. Degree of tissue coverage, degradation and consequent changes in polymer thermomechanical properties, and inflammatory response in preclinical animal models are unknown material attributes required for translating this material into cardiovascular devices. This study investigates changes in the polymer structure, tissue coverage, endothelialization, and inflammation of percutaneously implanted PGD patches (20 mm × 9 mm x 0.5 mm) into the branch pulmonary arteries of Yorkshire pigs for three months. After three months in vivo, 5/8 samples exhibited (100%) tissue coverage, 2/8 samples exhibited 85-95% tissue coverage, and 1/8 samples exhibited limited (<20%) tissue coverage with mild-moderate inflammation. PGD explants showed a (60-70%) volume loss and (25-30%) mass loss, and a reduction in polymer crosslinks. Lumenal and mural surfaces and the cross-section of the explant demonstrated evidence of degradation. This study validates PGD as an appropriate cardiovascular engineering material due to its propensity for rapid tissue coverage and uneventful inflammatory response in a preclinical animal model, establishing a precedent for consideration in cardiovascular repair applications.

Research Progress of Shape Memory Polymer and 4D Printing in Biomedical Application

As a kind of smart material, shape memory polymer (SMP) shows great application potential in the biomedical field. Compared with traditional metal-based medical devices, SMP-based devices have the following characteristics: 1) The adaptive ability allows the biomedical device to better match the surrounding tissue after being implanted into the body by minimally invasive implantation; 2) it has better biocompatibility and adjustable biodegradability; 3) mechanical properties can be regulated in a large range to better match with the surrounding tissue. 4D printing technology is a comprehensive technology based on smart materials and 3D printing, which has great application value in the biomedical field. 4D printing technology breaks through the technical bottleneck of personalized customization and provides a new opportunity for the further development of the biomedical field. This paper summarizes the application of SMP and 4D printing technology in the field of bone tissue scaffolds, tracheal scaffolds, and drug release, etc. Moreover, this paper analyzes the existing problems and prospects, hoping to provide a preliminary discussion and useful reference for the application of SMP in biomedical engineering.

Acellular Tissue-Engineered Vascular Grafts from Polymers: Methods, Achievements, Characterization, and Challenges

Extensive and permanent damage to the vasculature leading to different pathogenesis calls for developing innovative therapeutics, including drugs, medical devices, and cell therapies. Innovative strategies to engineer bioartificial/biomimetic vessels have been extensively exploited as an effective replacement for vessels that have seriously malfunctioned. However, further studies in polymer chemistry, additive manufacturing, and rapid prototyping are required to generate highly engineered vascular segments that can be effectively integrated into the existing vasculature of patients. One recently developed approach involves designing and fabricating acellular vessel equivalents from novel polymeric materials. This review aims to assess the design criteria, engineering factors, and innovative approaches for the fabrication and characterization of biomimetic macro- and micro-scale vessels. At the same time, the engineering correlation between the physical properties of the polymer and biological functionalities of multiscale acellular vascular segments are thoroughly elucidated. Moreover, several emerging characterization techniques for probing the mechanical properties of tissue-engineered vascular grafts are revealed. Finally, significant challenges to the clinical transformation of the highly promising engineered vessels derived from polymers are identified, and unique perspectives on future research directions are presented.

Engineering a Mechanoactive Fibrous Substrate with Enhanced Efficiency in Regulating Stem Cell Tenodifferentiation

Electrospun-aligned fibers in ultrathin fineness have previously demonstrated a limited capacity in driving stem cells to differentiate into tendon-like cells. In view of the tendon's mechanoactive nature, endowing such aligned fibrous structure with mechanoactivity to exert in situ mechanical stimulus by itself, namely, without any forces externally applied, is likely to potentiate its efficiency of tenogenic induction. To test this hypothesis, in this study, a shape-memory-capable poly(l-lactide-co-caprolactone) (PLCL) copolymer was electrospun into aligned fibrous form followed by a "stretching-recovery" shape-programming procedure to impart shape memory capability. Thereafter, in the absence of tenogenic supplements, human adipose-derived stem cells (ADSCs) were cultured on the programmed fibrous substrates for a duration of 7 days, and the effects of constrained recovery resultant stress-stiffening on cell morphology, proliferation, and tenogenic differentiation were examined. The results indicate that the in situ enacted mechanical stimulus due to shape memory effect (SME) did not have adverse influence on cell viability and proliferation, but significantly promoted cellular elongation along the direction of fiber alignment. Moreover, it revealed that tendon-specific protein markers such as tenomodulin (TNMD) and tenascin-C (TNC) and gene expression of scleraxis (SCX), TNMD, TNC, and collagen I (COL I) were significantly upregulated on the mechanoactive fibrous substrate with higher recovery stress compared to the counterparts. Mechanistically, the Rho/ROCK signaling pathway was identified to be involved in the substrate self-actuation-induced enhancement in tenodifferentiation. Together, these results suggest that constrained shape recovery stress may be employed as an innovative loading modality to regulate the stem cell tenodifferentiation by presenting the fibrous substrate with an aligned tendon-like topographical cue and an additional mechanoactivity. This newly demonstrated paradigm in modulating stem cell tenodifferentiation may improve the efficacy of tendon tissue engineering strategy for tendon healing and regeneration.

Emerging 4D Printing Strategies for Next-Generation Tissue Regeneration and Medical Devices

The rapid development of 3D printing has led to considerable progress in the field of biomedical engineering. Notably, 4D printing provides a potential strategy to achieve a time-dependent physical change within tissue scaffolds or replicate the dynamic biological behaviors of native tissues for smart tissue regeneration and the fabrication of medical devices. The fabricated stimulus-responsive structures can offer dynamic, reprogrammable deformation or actuation to mimic complex physical, biochemical, and mechanical processes of native tissues. Although there is notable progress made in the development of the 4D printing approach for various biomedical applications, its more broad-scale adoption for clinical use and tissue engineering purposes is complicated by a notable limitation of printable smart materials and the simplistic nature of achievable responses possible with current sources of stimulation. In this review, the recent progress made in the field of 4D printing by discussing the various printing mechanisms that are achieved with great emphasis on smart ink mechanisms of 4D actuation, construct structural design, and printing technologies, is highlighted. Recent 4D printing studies which focus on the applications of tissue/organ regeneration and medical devices are then summarized. Finally, the current challenges and future perspectives of 4D printing are also discussed.

Application and Development of Shape Memory Micro/Nano Patterns

Shape memory polymers (SMPs) are a class of smart materials that change shape when stimulated by environmental stimuli. Different from the shape memory effect at the macro level, the introduction of micro-patterning technology into SMPs strengthens the exploration of the shape memory effect at the micro/nano level. The emergence of shape memory micro/nano patterns provides a new direction for the future development of smart polymers, and their applications in the fields of biomedicine/textile/micro-optics/adhesives show huge potential. In this review, the authors introduce the types of shape memory micro/nano patterns, summarize the preparation methods, then explore the imminent and potential applications in various fields. In the end, their shortcomings and future development direction are also proposed.

A Hierarchical-Structured Mineralized Nanofiber Scaffold with Osteoimmunomodulatory and Osteoinductive Functions for Enhanced Alveolar Bone Regeneration

Alveolar bone resorption is a major cause of teeth loss and jeopardizes the osseointegration of dental implants, greatly affecting patient's quality of life and health. It is still a great challenge to completely regenerate the alveolar bone defect through traditional guided bone regeneration (GBR) membranes due to their limited bioactivity and regeneration potential. Herein, a new hierarchical-structured mineralized nanofiber (HMF) scaffold, which is combined with both anisotropic and isotropic nanofibrous surface topography and the mineralized particles, is fabricated via a simple template-assisted electrospinning technology and in situ mineralization method. This HMF scaffold can not only directly induce osteogenic differentiation of bone mesenchymal stem cells (osteoinduction), but also stimulate macrophage toward pro-healing (M2) phenotype-polarization with an elevated secretion of the pro-healing cytokines, eventually enhancing the osteogenesis (osteoimmunomodulation). The results of in vivo rat alveolar bone defect repair experiments demonstrate that as compared with the combination of commercial Bio-Gide and Bio-Oss, the single HMF scaffold shows comparable or even superior bone repair effect, with better tissue-integration and more suitable degradation time and accompanied by a simplified operation.

Smart scaffolds: shape memory polymers (SMPs) in tissue engineering

Smart scaffolds based on shape memory polymer (SMPs) have been increasingly studied in tissue engineering. The unique shape actuating ability of SMP scaffolds has been utilized to improve delivery and/or tissue defect filling. In this regard, these scaffolds may be self-deploying, self-expanding, or self-fitting. Smart scaffolds are generally thermoresponsive or hydroresponsive wherein shape recovery is driven by an increase in temperature or by hydration, respectively. Most smart scaffolds have been directed towards regenerating bone, cartilage, and cardiovascular tissues. A vast variety of smart scaffolds can be prepared with properties targeted for a specific tissue application. This breadth of smart scaffolds stems from the variety of compositions employed as well as the numerous methods used to fabricated scaffolds with the desired morphology. Smart scaffold compositions span across several distinct classes of SMPs, affording further tunability of properties using numerous approaches. Specifically, these SMPs include those based on physically cross-linked and chemically cross-linked networks and include widely studied shape memory polyurethanes (SMPUs). Various additives, ranging from nanoparticles to biologicals, have also been included to impart unique functionality to smart scaffolds. Thus, given their unique functionality and breadth of tunable properties, smart scaffolds have tremendous potential in tissue engineering.

Enhancement of Endothelialization by Topographical Features Is Mediated by PTP1B-Dependent Endothelial Adherens Junctions Remodeling

Endothelial Cells (ECs) form cohesive cellular lining of the vasculature and play essential roles in both developmental processes and pathological conditions. Collective migration and proliferation of endothelial cells (ECs) are key processes underlying endothelialization of vessels as well as vascular graft, but the complex interplay of mechanical and biochemical signals regulating these processes are still not fully elucidated. While surface topography and biochemical modifications have been used to enhance endothelialization in vitro, thus far such single-modality modifications have met with limited success. As combination therapy that utilizes multiple modalities has shown improvement in addressing various intractable and complex biomedical conditions, here, we explore a combined strategy that utilizes topographical features in conjunction with pharmacological perturbations. We characterized EC behaviors in response to micrometer-scale grating topography in concert with pharmacological perturbations of endothelial adherens junctions (EAJ) regulators. We found that the protein tyrosine phosphatase, PTP1B, serves as a potent regulator of EAJ stability, with PTP1B inhibition synergizing with grating topographies to modulate EAJ rearrangement, thereby augmenting global EC monolayer sheet orientation, proliferation, connectivity, and collective cell migration. Our data delineates the crosstalk between cell-ECM topography sensing and cell-cell junction integrity maintenance and suggests that the combined use of grating topography and PTP1B inhibitor could be a promising strategy for promoting collective EC migration and proliferation.

Bioactive 3D porous cobalt-doped alginate/waterborne polyurethane scaffolds with a coral reef-like rough surface for nerve tissue engineering application

Bioactive 3D porous cobalt-doped alginate/waterborne polyurethane scaffolds with a coral reef-like rough surface were prepared for nerve tissue engineering application.

Surface Engineering of Cardiovascular Devices for Improved Hemocompatibility and Rapid Endothelialization

Cardiovascular devices have been widely applied in the clinical treatment of cardiovascular diseases. However, poor hemocompatibility and slow endothelialization on their surface still exist. Numerous surface engineering strategies have mainly sought to modify the device surface through physical, chemical, and biological approaches to improve surface hemocompatibility and endothelialization. The alteration of physical characteristics and pattern topographies brings some hopeful outcomes and plays a notable role in this respect. The chemical and biological approaches can provide potential signs of success in the endothelialization of vascular device surfaces. They usually involve therapeutic drugs, specific peptides, adhesive proteins, antibodies, growth factors and nitric oxide (NO) donors. The gene engineering can enhance the proliferation, growth, and migration of vascular cells, thus boosting the endothelialization. In this review, the surface engineering strategies are highlighted and summarized to improve hemocompatibility and rapid endothelialization on the cardiovascular devices. The potential outlook is also briefly discussed to help guide endothelialization strategies and inspire further innovations. It is hoped that this review can assist with the surface engineering of cardiovascular devices and promote future advancements in this emerging research field.

Nano/microstructures of shape memory polymers: from materials to applications

Shape memory polymers (SMPs) are macromolecules in which linear chains and crosslinking points play a key role in providing a shape memory effect. As smart polymers, SMPs have the ability to change shape, stiffness, size, and structure when exposed to external stimuli, leading to potential uses for SMPs throughout our daily lives in a diverse range of areas including the aerospace and automotive industries, robotics, biomedical engineering, smart textiles, and tactile devices. SMPs can be fabricated in many forms and sizes from the nanoscale to the macroscale, including nanofibers, nanoparticles, thin films, microfoams, and bulk devices. The introduction of nanostructure into SMPs can result in enhanced mechanical properties, unique structural color, specific surface area, and multiple functions. It is necessary to enhance the current understanding of the various nano/microstructures of SMPs and their fabrication, and to find suitable approaches for constructing SMP-based nano/microstructures for different applications. In this review, we summarize the current state of different SMP nano/microstructures, fabrication techniques, and applications, and give suggestions for their future development.

A programmable, fast-fixing, osteo-regenerative, biomechanically robust bone screw

The use of a screw for repairing defected bones is limited by the dilemma between stiffness, bioactivity and internal fixation ability in current products. For polymer bone screw, it is difficult to achieve the bone stiffness and osteo-induction. Polymer composites may enhance bioactivity and mechanical properties but sacrifice the shape memory properties enormously. Herein, we fabricated a programmable bone screw which is composed of shape memory polyurethane, hydroxyapatite and arginylglycylaspartic acid to resolve the above problem. This composite has significantly improved mechanical and shape-memory properties with a modulus of 250 MPa, a shape fixity ratio of ~90% and a shape recovery ratio of ~96%. Moreover, shape fixity and recovery ratios of the produced SMPC screw in the simulative biological condition were respectively ~80% and ~82%. The produced screw could quickly recover to its original shape in vitro within 20 s leading to easy internal fixation. Additionally, the composite could support mesenchymal stem cell survival, proliferation and osteogenic differentiation in vitro tests. It also promoted tissue growth and showed beneficial mechanical compatibility after implantation into a rabbit femoral intracondyle for 12 weeks with little inflammation. Such bone screw exhibited a fast-fixing, tightened fitting, enhanced supporting and boosted bioactivity simultaneously in the defective bone, which provides a solution to the long-standing problem for bone repairing. We envision that our composite material will provide valuable insights into the development of a new generation of bone screws with good fixation and osteogenic properties. STATEMENT OF SIGNIFICANCE: The main obstacles to a wider use of a bone screw are unsatisfied stiffness, inflammatory response and screw loosening issues. Herein, we report a programmable screw with mechanically robust, bioactive and fast-fixing performances. The shape memory polymer composite takes advantage of the component in the natural bone and possesses a stable bush-like structure inside through the covalent bonding, and thus achieve significantly improved mechanical and memory properties. Based on its shape memory effect, the produced screw was proved to offer a recovery force to surroundings and promote the bone regeneration effectively. Therefore, the composite realizes our expectations on functions through structure design and paves a practical and effective way for the development of a new generation of bone screws.

Photo-Driven Self-Healing of Arbitrary Nondestructive Damage in Polyethylene-Based Nanocomposites

Polymer products with precise shape recovery behavior are highly desired for practical applications owing to excellent processability and mechanical properties compared with metallic or inorganic materials. Shape memory polymers (SMPs) provide a solution for this end, but the design and scalable fabrication of photothermal controllable SMPs with accurate, rapid, and repeatable recovery behaviors are still great challenges. In this work, polyurethane/sulfonated carbon nanotube (PU/S-CNT) composite particles are introduced into a cross-linked high-density polyethylene (HDPE) as a functional dispersed phase to realize photo-driven fast shape recovery in cheap polymer composite materials. It is found that microcracks can be induced by the PU/S-CNT composite particles during deformation, generating a particular microparticle in a microcrack (MC-MP) structure. The MC-MP microstructure significantly improves the photothermal conversion efficiency, thereby accelerating the photo-driven shape self-healing of arbitrary nondestructive material damage. It is also found that proper cross-linking of the matrix, HDPE, greatly improves the recovery performance of the materials. This strategy based on the MC-MP microstructure and cross-linked matrix is also instructive for designing new SMPs using other polymer materials.

Temperature Responsive Shape-Memory Scaffolds with Circumferentially Aligned Nanofibers for Guiding Smooth Muscle Cell Behavior

Structural simulation of the smooth muscle layer plays an important role in tissue engineering of blood vessels for the replacement of damaged arteries. However, it is difficult to construct small-diameter tubular scaffolds to homogenously locate and align smooth muscle cells (SMCs). In this work, novel temperature responsive shape-memory scaffolds are designed for SMC culturing. The scaffolds are composed of an outer layer of poly(lactide-glycolide-trimethylene carbonate) (PLGATMC) for programming the deformation from planar to small-diameter tubular shape and an inner layer of aligned nanofibrous membrane of poly(lactide-glycolide)/chitosan (PLGA/CS) to regulate cell adhesion, proliferation, and morphology. The SMC behaviors and functions are dependent on the PLGA/CS ratios of membranes, and the scaffold with PLGA/CS 7:3 membrane exhibits the most suitable ability to regulate SMC behavior. The PLGA/CS@PLGATMC scaffold can be deformed into a temporary planar at 20 °C for convenient seeding and attachment of SMCs and then immediately self-rolled into 3D tube at 37 °C. The proposed strategy offers a practical approach for the development of small-diameter vascular scaffolds from 2D planar into 3D tubular shape by self-rolling.

Near-Infrared-Triggered Dynamic Surface Topography for Sequential Modulation of Macrophage Phenotypes

Immune response is critical to tissue repair. Designing biomaterials with immunomodulatory functions has become a promising strategy to facilitate tissue repair. Considering the key roles of macrophages in tissue repair and the significance of the balance of M1 and M2, smart biomaterials, which can harness macrophage phenotypes dynamically to match the tissue healing process on demand, have attracted a lot of attention to be set apart from the traditional anti-inflammatory biomaterials. Here, we prepare a gold nanorod-contained shape memory polycaprolactone film with dynamic surface topography, which has the ability to be transformed from flat to microgrooved under near-infrared (NIR) irradiation. Based on the close relationships between the morphologies and the phenotypes of macrophages, the NIR-triggered surface transformation induces the elongation of macrophages, and consequently the upregulated expressions of arginase-1 and IL-10 in vitro, indicating the change of macrophage phenotypes. The sequential modulation of macrophage phenotypes by dynamic surface topography is further confirmed in an in vivo implantation test. The healing-matched modulation of macrophage phenotypes by dynamic surface topography without the stimuli of cytokines offers an effective and noninvasive strategy to manipulate tissue regenerative immune reactions to achieve optimized healing outcomes.

Mechanical properties of l-lysine based segmented polyurethane vascular grafts and their shape memory potential

Segmented polyurethanes based on polycaprolactone, 4,4 (metylene-bis-cyclohexyl) isocyanate, and l-lysine were synthesized, manufactured as small vascular grafts and characterized according to ISO 7198 standard for cardiovascular implants-tubular vascular prosthesis. In terms of mechanical properties, the newly synthesized polyurethane films exhibited lower secant modulus than Tecoflex™ SG 80A, a well-known medical grade polyurethane. Similarly, when tested as grafts, the l-lysine-based polyurethane exhibited lower longitudinal failure load (11.5 N vs. 116 N), lower circumferential failure load per unit length (5.67 N/mm vs. 14.0 N/mm) and lower suture forces for both nylon (13.3 N vs. 24.0 N) and silk (14.0 N vs. 19.3 N) when compared to Tecoflex™ SG 80A grafts. l-Lysine-based graft exhibited a burst strength of 3620 mmHg (482.6 kPa) and a compliance of 0.16%/mmHg. The cell adhesion was demonstrated with NIH/3T3 fibroblasts where cell adhesion was observed on both films and grafts, while cell alignment was observed only on the grafts. The mechanical properties of this polyurethane and the possibility of strain-induced PCL crystals as the switching phase for shape memory materials, allowed a strain recovery ratio and a strain fixity ratio with values higher than 95% and 90%, respectively, with a repeatability of the shape-memory properties up to 4 thermo-mechanical cycles. Overall, the properties of lysine-based polyurethanes are suitable for large diameter vascular grafts where cell alignment can be controlled by their shape memory potential.

Topographical patterning: characteristics of current processing techniques, controllable effects on material properties and co-cultured cell fate, updated applications in tissue engineering, and improvement strategies

Topographical patterning has recently attracted lots of attention in regulating cell fate, understanding the mechanism of cell–microenvironment interactions, and solving the great issues of regenerative medicine.

Bioinspired Concentric-Cylindrical Multilayered Scaffolds with Controllable Architectures: Facile Preparation and Biological Applications

Multilayered objects are the most important and interesting structures in nature, exhibiting multiple functionalities. Inspired by the excellent structural-functional characteristics of nature creatures, concentric-cylindrical multilayered scaffolds were prepared by a combination of melt extrusion and leaching, in which well-defined alternating microlayer/gap is assembled. Furthermore, the macroscopic shape, internal structure, and surface topography of such a multilayered scaffold can be elaborately prepared by a simple physical process. The whole process has low cost, is efficient, and is environmentally friendly. Furthermore, such multilayered scaffolds show some interesting applications, e.g., lipophilic/hydrophilic drugs delivery and cell self-seeding. Considering the facile preparation process and versatile applications, this study will open up a new pathway to fabricate scaffolds with controllable architectures and expand their biodegradable polymer applications.

Regulation Effects of Biomimetic Hybrid Scaffolds on Vascular Endothelium Remodeling

The formation of complete and well-functioning endothelium is critical for the success of tissue-engineered vascular grafts yet remaining a fundamental challenge. Endothelium remodeling onto the lumen of tissue-engineered vascular grafts is affected by their topographical, mechanical, and biochemical characteristics. For meeting multiple requirements, composite strategies have recently emerged for fabricating hybrid scaffolds, where the integrated properties are tuned by varying their compositions. However, the underlying principle how the integrated properties of hybrid scaffolds regulate vascular endothelium remodeling remains unclear. To uncover the regulation effects of hybrid scaffolds on vascular endothelium remodeling, we prepared different biomimetic hybrid scaffolds using gelatin methacrylamide (GelMA) and poly-ε-caprolactone (PCL) and then investigated vascular endothelial cell responses on them. GelMA and PCL, respectively, conferred the resulting scaffolds with biomimetic bioactivity and mechanical properties, which were tuned by varying GelMA/PCL mass ratios (3:1, 1:1, or 1:3). On different GelMA/PCL hybrid scaffolds, distinct vascular endothelial cell responses were observed. Firm cell-scaffold/cell-cell interactions were rapidly established on the hybrid scaffolds with the highest mass ratio of bioactive GelMA. However, they were mechanically insufficient as vascular grafts. On the contrary, the scaffolds with the highest mass ratio of PCL showed significantly reinforced mechanical properties but poor biological performance. Between the two extremes, the scaffolds with the same GelMA/PCL mass ratio balanced the pros and cons of two materials. Therefore, they could meet the mechanical requirements of vascular grafts and support the early-stage vascular endothelial cell remodeling by appropriate biological signaling and mechanotransduction. This investigation experimentally proves that scaffold bioactivity is the dominant factor affecting vascular endothelial cell adhesion and remodeling, whereas mechanical properties are crucial factors for the integrity of endothelium. This work offers a universal design strategy for desirable vascular grafts for improved endothelium remodeling.

A biomimetic hierarchical structure with a hydrophilic surface and a hydrophobic subsurface constructed from waterborne polyurethanes containing a self-assembling peptide extender

A biomimetic hierarchical structure with a hydrophilic surface and a hydrophobic subsurface is constructed from waterborne polyurethanes.

Strategy for Fabricating Multiple-Shape-Memory Polymeric Materials via the Multilayer Assembly of Co-Continuous Blends

Shape-memory polymeric materials containing alternating layers of thermoplastic polyurethane (TPU) and co-continuous poly(butylene succinate) (PBS)/polycaprolactone (PCL) blends (denoted SLBs) were fabricated through layer-multiplying coextrusion. Because there were two well-separated phase transitions caused by the melt of PCL and PBS, both the dual- and triple-shape-memory effects were discussed. Compared with the blending specimen with the same components, the TPU/SLB multilayer system with a multicontinuous structure and a plenty of layer interfaces was demonstrated to have higher shape fixity and recovery ability. When the number of layers reached 128, both the shape fixity and recovery ratios were beyond 95 and 85% in dual- and triple-shape-memory processes, respectively, which were difficult to be achieved through conventional melt-processing methods. On the basis of the classic viscoelastic theory, the parallel-assembled TPU and SLB layers capable of maintaining the same strain along the deforming direction were regarded to possess the maximum ability to fix temporary shapes and trigger them to recover back to original ones through the interfacial shearing effect. Accordingly, the present approach provided an efficient strategy for fabricating outstanding multiple-shape-memory polymers, which may exhibit a promising application in the fields of biomedical devices, sensors and actuators, and so forth.