Vertical Orientation of Nanocylinders in Liquid-Crystalline Block Copolymers Directed by Light

Surface Morphing of Azopolymers toward Advanced Anticounterfeiting Enabled by a Two-Step Method: Light Writing and Then Reading in Liquid

Surface morphing of organic materials is necessary for advances in semiconductor processing, optical gratings, anticounterfeiting etc., but it is still challenging, especially for its fundamental explanation and further applications like advanced anticounterfeiting. Here, we report one strategy to acquire surface deformation of the liquid-crystalline azopolymer film using a two-step method: selective photoisomerization of azopolymers and then solvent development. In the first step, surface tension of the polymer film can be patterned by the selective photoisomerization of azopolymers, and then in the second step, the flowing solvent drags the underlying polymer to transport, leading to the formation of surface deformation. Interestingly, the direction of mass transport is opposite to the traditional Marangoni flow, and the principle of solvents' choice is the matching of surface tensions between the azopolymer and the solvent. The two-step method shows characteristics of efficient surface morphing, which could be applied in advanced anticounterfeiting by the way of photomask-assistant information writing or microscale direct writing, and then reading in a specific liquid environment. This paves a new way for understanding the mechanism of mass transport toward numerous unprecedented applications using various photoresponsive materials.

Tunable Thin Film Periodicities by Controlling the Orientation of Cylindrical Domains in Side Chain Liquid Crystalline Block Copolymers

A facile approach to block copolymer (BCP) domain orientation control in thin films has been demonstrated by employing a BCP with liquid crystalline semifluorinated side chains by tuning the composition of the copolymers of the bottom surface layer (BSL). 1H,1H,2H,2H-Perfluorodecanethiol was attached to a precursor polymer, polystyrene-block-poly(glycidyl methacrylate) (PS-b-PGMA), to obtain a novel BCP with a C8F17-containing liquid crystal (LC) side chain (PS-b-P8FMA). Anisotropic hexagonally packed cylinder domains in a bulk state were first characterized by transmission electron microscopy (TEM) and small angle X-ray scattering (SAXS). The observed morphology transition of BCPs with different fluorinated side chain lengths of –CF3, –C4F9, and –C6F13 suggested the decisive effects of LC side chain ordering on the anisotropic nanostructures. In the thin film study, poly(methyl methacrylate-random-2,2,2-trifluoroethyl methacrylate-random-methacrylic acid) (PMMA-ran-PTFEMA-ran-PMAA) solution was used as BSLs for tuning the desired periodicities. The surface free energy (SFE) of BSL was simply tailored by changing the composition of comonomers. In atomic force microscopy (AFM) characterization, long-range ordered perpendicularly oriented BCP domains in a hexagonally packed array or parallel oriented BCP domains as striation patterns were easily fabricated on non-preferential or preferential BSL, respectively. The study presents a novel approach to tunable thin film periodicities without changing or modifying BCPs, which is desired in next-generation BCP lithography.

Mechanically mutable polymer enabled by light

Human skin is a remarkable example of a biological material that displays unique mechanical characters of both soft elasticity and stretchability. However, mimicking these features has been absent in photoresponsive soft matters. Here, we present one synthetic ABA-type triblock copolymer consisting of polystyrene as end blocks and one photoresponsive azopolymer as the middle block, which is stiffness at room temperature and shows a phototunable transition to soft elastics athermally. We have synthesized an elastics we term "photoinduced soft elastomer," where the photo-evocable soft midblock of azopolymer and the glassy polystyrene domains act as elastic matrix and physical cross-linking junctions, respectively. On the basis of the photoswitchable transformation between stiffness and elasticity at room temperature, we demonstrated precise control over nanopatterns on nonplanar substrates especially adaptable in the human skin and fabrication of packaged perovskite solar cells, enabling the simple, human-friendly, and controllable approach to be promising for mechanically adaptable soft photonic and electronic packaging applications.

Photo-controlled self-assembly behavior of novel amphiphilic polymers with a rosin-based azobenzene group

Novel ‘bola’ rosin-based photo-responsive amphiphilic polymers PMPn show an extremely high photoresponsive efficiency and various assembly morphological changes.

Membranes for Cation Transport Based on Dendronized Poly(epichlorohydrin-co-ethylene oxide). Part 1: The Effect of Dendron Amount and Column Orientation on Copolymer Mobility

Dendronized polyethers give rise to columnar LC structures which can successfully act as cation transport materials. Therefore, we prepared two different materials, based on Poly(epichlorohydrin-co-ethylene oxide) (PECH-co-EO) grafted with methyl 3,4,5-tris[4-(n-dodecan-1-yloxy)benzyloxy] benzoate, containing 20% or 40% modified units, respectively. The obtained polymers were characterized by differential scanning calorimetry (DSC), X-ray diffraction and optical microscopy between crossed polars (POM) and compared to the unmodified PECH-co-EO. In order to reach efficient transport properties, homeotropically oriented membranes were prepared by a fine-tuned thermal annealing treatment and were subsequently investigated by dynamic mechanical thermal analysis (DMTA) and dielectric thermal analysis (DETA). We found that the presence of the dendrons induces a main chain partial crystallization of the polyether chain and coherently increases the polymer Tg. This effect is more evident in the oriented membranes. As for copolymer orientation upon annealing, the cooling rate and the annealing temperature were the most crucial factors. DMTA and DETA confirmed that grafting with the dendron strongly hinders copolymer motions, but did not show great differences between unoriented and oriented membranes, regardless of the amount of dendrons.

Thickness-Dependent Photo-Aligned Thin-Film Morphologies of a Block Copolymer Containing an Azobenzene-Based Liquid Crystalline Polymer and a Poly(ionic liquid)

Photo-induced alignment of the thin-film morphologies of azobenzene-containing block copolymers (BCPs) is an effective method to obtain a uniaxial pattern of nanocylinders. Although film thickness is an important factor affecting the self-assembly of BCP thin films, the influence of film thickness on the photo-induced alignment of BCP thin-film morphology has never been systematically studied. Herein, we report the thickness-dependent photo-aligned film morphologies of the BCP containing an azobenzene-based liquid crystalline polymer and a poly(ionic liquid) (PIL), with a perfect uniaxial pattern of PIL nanocylinders. For films aligned with the unpolarized light (UPL), the out-of-plane PIL nanocylinders can be obtained in the film with a thickness of only 1L0 (∼30 nm, where L0 is the layer spacing of the hexagonally packed cylinder array), which is far lower than the thickness (more than 4L0) of the thermally annealed film needed to obtain the same morphology. This change is attributed to the orientation effect of UPL on azobenzene mesogens that suppresses the excluded volume effect. For the films aligned with linearly polarized light (LPL), to take advantage of the excluded volume effect to obtain the planar orientation of azobenzene mesogens, the thickness should be controlled to be no more than 3L0 to achieve an in-plane uniaxial alignment of PIL nanocylinders. The above relationship between the morphology and thickness of photo-aligned film eliminates the obstacles encountered in preparing films with well-ordered photo-aligned morphologies.

Developing Anisotropy in Self-Assembled Block Copolymers: Methods, Properties, and Applications

Block copolymers (BCPs) self-assembly has continually attracted interest as a means to provide bottom-up control over nanostructures. While various methods have been demonstrated for efficiently ordering BCP nanodomains, most of them do not generically afford control of nanostructural orientation. For many applications of BCPs, such as energy storage, microelectronics, and separation membranes, alignment of nanodomains is a key requirement for enabling their practical use or enhancing materials performance. This review focuses on summarizing research progress on the development of anisotropy in BCP systems, covering a variety of topics from established aligning techniques, resultant material properties, and the associated applications. Specifically, the significance of aligning nanostructures and the anisotropic properties of BCPs is discussed and highlighted by demonstrating a few promising applications. Finally, the challenges and outlook are presented to further implement aligned BCPs into practical nanotechnological applications, where exciting opportunities exist.

Supramolecular Chirality Transfer toward Chiral Aggregation: Asymmetric Hierarchical Self-Assembly

Self-assembly, as a typical bottom-up strategy for the fabrication of functional materials, has been applied to fabricate chiral materials with subtle chiral nanostructures. The chiral nanostructures exhibit great potential in asymmetric catalysis, chiral sensing, chiral electronics, photonics, and even the realization of several biological functions. According to existing studies, the supramolecular chirality transfer process combined with hierarchical self-assembly plays a vital role in the fabrication of multiscale chiral structures. This progress report focuses on the hierarchical self-assembly of chiral or achiral molecules that aggregate with asymmetric spatial structures such as twisted bands, helices, and superhelices in different environments. Herein, recent studies on the chirality transfer induced self-assembly based on a variety of supramolecular interactions are summarized. In addition, the influence of different environments and the states of systems including solutions, condensed states, gel systems, interfaces on the asymmetric hierarchical self-assembly, and the expression of chirality are explored. Moreover, both the driving forces that facilitate chiral bias and the supramolecular interactions that play an important role in the expression, transfer, and amplification of the chiral sense are correspondingly discussed.

Cooperative and Independent Effect of Modular Functionalization on Mesomorphic Performances and Microphase Separation of Well-Designed Liquid Crystalline Diblock Copolymers

Liquid crystalline block copolymers (LCBCPs) are promising for developing functional materials owing to an assembly of better functionalities. Taking advantage of differences in reactivity between alkynyl and vinyl over temperature during hydrosilylation, a series of LCBCPs with modular functionalization of the block copolymers (BCPs) are reported by independently and site-selectively attaching azobenzene moieties containing alkynyl (LC₁ ) and Si-H (LC₂ ) terminals into well-designed poly(styrene)-block-polybutadienes (PS-b-PBs) and poly(4-vinylphenyldimethylsilane)-block-polybutadienes (PVPDMS-b-PBs) produced from living anionic polymerization (LAP). By the principle of modular functionalization, it is demonstrated that mono-functionalized (PVPDMS-g-LC₁ )-b-PB and PS-b-(PB-g-LC₂ ) not only maintain independence but also have cooperative contributions to bi-functionalized (PVPDMS-g-LC₁ )-b-(PB-g-LC₂ ) in terms of mesomorphic performances and microphase separation, which is evident from differential scanning calorimetry (DSC) and polarized optical morphologies (POM) and identified by powder X-ray diffractions. With the application of the new principle of modular functionalization, local-crosslinked liquid crystalline networks (LCNs) with controlled functionality are successfully synthesized, which show well-controlled phase behaviors over molecular compositions.

Vertical Lamellae Formed by Two-Step Annealing of a Rod-Coil Liquid Crystalline Block Copolymer Thin Film

Silicon-containing block copolymer thin films with high interaction parameter and etch contrast are ideal candidates to generate robust nanotemplates for advanced nanofabrication, but they typically form in-plane oriented microdomains as a result of the dissimilar surface energies of the blocks. Here, we describe a two-step annealing method to produce vertically aligned lamellar structures in thin film of a silicon-containing rod-coil thermotropic liquid crystalline block copolymer. The rod-coil block copolymer with the volume fraction of the Si-containing block of 0.22 presents an asymmetrical lamellar structure in which the rod block forms a hexatic columnar nematic liquid crystalline phase. A solvent vapor annealing step first produces well-ordered in-plane cylinders of the Si-containing block, then a subsequent thermal annealing promotes the phase transition from in-plane cylinders to vertical lamellae. The pathways of the order-order transition were examined by microscopy and in situ using grazing incidence small-angle X-ray scattering and wide-angle X-ray scattering.

Photoinduced Reversible Solid-to-Liquid Transitions for Photoswitchable Materials

Heating and cooling can induce reversible solid-to-liquid transitions of matter. In contrast, athermal photochemical processes can induce reversible solid-to-liquid transitions of some newly developed azobenzene compounds. Azobenzene is photoswitchable. UV light induces trans-to-cis isomerization; visible light or heat induces cis-to-trans isomerization. Trans and cis isomers usually have different melting points (T_m ) or glass transition temperatures (T_g ). If T_m or T_g of an azobenzene compound in trans and cis forms are above and below room temperature, respectively, light may induce reversible solid-to-liquid transitions. In this Review, we introduce azobenzene compounds that exhibit photoinduced reversible solid-to-liquid transitions, discuss the mechanisms and design principles, and show their potential applications in healable coatings, adhesives, transfer printing, lithography, actuators, fuels, and gas separation. Finally, we discuss remaining challenges in this field.

Thermotropic Liquid Crystalline Polymers with Various Alkoxy Side Groups: Thermal Properties and Molecular Dynamics

Two series of thermotropic liquid-crystalline polymers (TLCPs) were synthesized by reacting various dialkoxy terephthalate units with hydroquinone (HQ) and 2,6-naphthalene diol (Naph). The dialkoxy terephthalate moieties used in this study include 2,5-diethoxyterephthalate, 2,5-dibutoxyterephthalate, and 2,5-dihexyloxy-terephthalate. All the TLCPs synthesized in this study formed nematic phases. The molecular motions according to the length of the dialkoxy side groups in the TLCPs were evaluated by 13C cross-polarization/magic angle spinning nuclear magnetic resonance spectroscopy. The thermal properties and molecular dynamics of the TLCPs are found to be affected by the length of the dialkoxy side group and the aromatic diol unit in the main chain. Further, the thermal behaviors, liquid crystalline mesophases, and degree of crystallinity of the two series of TLCPs, i.e., HQ- and Naph-TLCPs, are compared.

Photoresponsive polymers with multi-azobenzene groups

Photoresponsive polymers with multi-azobenzene groups are reviewed and their potential applications in photoactuation, photo-patterning, and photoinduced birefringence are introduced.

Synthesis of monodisperse aromatic azo oligomers toward gaining new insight into the isomerization of π-conjugated azo systems

The unique E → Z photoisomerization mechanism of monodisperse fluorene-azo oligomers was studied and the trans-[trans–trans]_n-cis model was proposed. This novel model will give new insight into the isomerization of π-conjugated azo systems.

Self-assembly of a silicon-containing side-chain liquid crystalline block copolymer in bulk and in thin films: kinetic pathway of a cylinder to sphere transition

The self-assembly of a high-χ silicon-containing side-chain liquid crystalline block copolymer (LC BCP) in bulk and in thin films is reported, and the structural transition process from the hexagonally packed cylinder (HEX) to the body-centered cubic structure (BCC) in thin films was examined by both reciprocal and real space experimental methods. The block copolymer, poly(dimethylsiloxane-b-11-(4'-cyanobiphenyl-4-yloxy)undecylmethacrylate) (PDMS-b-P(4CNB11C)MA) with a molecular weight of 19.5 kg mol-1 and a volume fraction of PDMS 27% self-assembled in bulk into a hierarchical nanostructure of sub-20 nm HEX cylinders of PDMS with the P(4CNB11C)MA block exhibiting a smectic LC phase with a 1.61 nm period. The structure remained HEX as the P(4CNB11C)MA block transformed to an isotropic phase at ∼120 °C. In the thin films, the PDMS cylindrical microdomains were oriented in layers parallel to the substrate surface. The LC block formed a smectic LC phase which transformed to an isotropic phase at ∼120 °C, and the microphase-separated nanostructure transformed from HEX to BCC spheres at ∼160 °C. The hierarchical structure as well as the dynamic structural transition of the thin films were characterized using in situ grazing-incidence small-angle X-ray scattering and grazing-incidence wide-angle X-ray scattering. The transient morphologies from the HEX to BCC structure in thin films were captured by scanning electron microscopy and atomic force microscopy, and the transition pathway was described.

Hierarchical Self-Assembly in Liquid-Crystalline Block Copolymers Enabled by Chirality Transfer

Helical topological structures are often found in chiral biological systems, but seldom in synthesized polymers. Now, controllable microphase separation of amphiphilic liquid-crystalline block copolymers (LCBCs) consisting of hydrophilic poly(ethylene oxide) and hydrophobic azobenzene-containing poly(methylacrylate) is combined with chirality transfer to fabricate helical nanostructures by doping with chiral additives (enantiopure tartaric acid). Through hydrogen-bonding interactions, chirality is transferred from the dopant to the aggregation, which directs the hierarchical self-assembly in the composite system. Upon optimized annealing condition, helical structures in film are fabricated by the induced aggregation chirality. The photoresponsive azobenzene mesogens in the LCBC assist photoregulation of the self-assembled helical morphologies. This allows the construction and non-contact manipulation of complicated nanostructures.

Chirality Construction from Preferred π-π Stacks of Achiral Azobenzene Units in Polymer: Chiral Induction, Transfer and Memory

The induction of supramolecular chirality from achiral polymers has been widely investigated in composite systems consisting of a chiral guest, achiral host, and solvents. To further study and understand the process of chirality transfer from a chiral solvent or chiral molecules to an achiral polymer backbone or side-chain units, an alternative is to reduce the components in the supramolecular assembled systems. Herein, achiral side-chain azobenzene (Azo)-containing polymers, poly(6-[4-(4-methoxyphenylazo) phenoxy] hexyl methacrylate) (PAzoMA), with different M_ns, were synthesized by atom transfer radical polymerization (ATRP). Preferred chirality from supramolecular assembled trans-Azo units of PAzoMAs is successfully induced solely by the neat limonene. These aggregates of the polymers in limonene solution were characterized by circular dichroism (CD), UV-vis spectra, and dynamic light scattering (DLS) under different temperatures. The temperature plays an important role in the course of chiral induction. Meanwhile, supramolecular chirality can be constructed in the solid films of the achiral side-chain Azo-containing polymers that were triggered by limonene vapors. Also, it can be erased after heated above the glass transition temperature (T_g) of the polymer, and recovered after cooling down in the limonene vapors. A chiroptical switch can be built by alternately changing the temperature. The solid films show good chiral memory behaviors. The current results will facilitate studying the mechanism of chirality transfer induced by chiral solvent and improve potential application possibilities in chiral film materials.

Synthesis of POSS-functionalized liquid crystalline block copolymers via RAFT polymerization for stabilizing blue phase helical soft superstructures

A study of the phase transition behaviors of blue phase liquid crystals containing different amounts of POSS-functionalized LC BCPs.