Simultaneous Top and Bottom Perovskite Interface Engineering by Fullerene Surface Modification of Titanium Dioxide as Electron Transport Layer

C60-CN: A bifunctional interface modification material for perovskite solar cells

Titanium dioxide (TiO2) is regularly used as an electron transport material in n-i-p perovskite solar cells (PSCs). However, massive defects exist on the TiO2 surface, which will lead to serious hysteresis and interface charge recombination of the device, thus affecting the device's efficiency. In this study, a cyano fullerene pyrrolidine derivative (C60-CN) was synthesized and applied to PSCs for the first time to modify the TiO2 electron transport layer. Systematic studies have shown that the addition of the C60-CN modification layer on the TiO2 surface will enlargement the perovskite grain size, improve the perovskite film quality, enhance electron transport, and reduce charge recombination. The C60-CN layer can significantly reduce the density of trap states in the perovskite solar cells. As a result, the PSCs based on C60-CN/TiO2 obtained a power conversion efficiency (PCE) of 18.60%, suppressing the hysteresis and improving the stability, whereas the PCE of the control device using the original TiO2 ETL was lower, 17.19%.

Effect of surface characteristics on the antibacterial properties of titanium dioxide nanotubes produced in aqueous electrolytes with carboxymethyl cellulose

Nanotubular structures were produced on a commercially pure titanium surface by anodization in an aqueous electrolyte that contained carboxymethyl cellulose and sodium fluoride. The internal diameters obtained were about 100, 48, and 9.5 nm, respectively. Several heat treatments at 200, 350, and 600°C were made to produce nanotubes with different titanium dioxide polymorphs (anatase, rutile). All tested surfaces were superhydrophilic, this behavior was maintained after at least 30 days, regardless of the heat treatment. Although in previous works the nanotube features effect on the bacteria behavior had been studied; this item still unclear. For the best of our knowledge, the effect of small internal diameters (about 10 nm) with and without heat treatment and with and without ultraviolet (UV) irradiation on the bacteria strains comportment has not been reported. From our results, both the internal diameter and the postanodized treatments have an effect on the bacteria strains comportment. All nanotubular coatings UV treated and heat treated at 350 and 600°C; despite they have different inner diameters, inhibit the bacteria growth of both Staphylococcus aureus and Pseudomonas aeruginosa strains. The nanotubular coatings obtained at 20 V and heat treated at 350°C produced the lower bacteria adhesion against both strains evaluated.

Unravelling the Photocatalytic Behavior of All-Inorganic Mixed Halide Perovskites: The Role of Surface Chemical States

Within the most mesmerizing materials in the world of optoelectronics, mixed halide perovskites (MHPs) have been distinguished because of the tunability of their optoelectronic properties, balancing both the light-harvesting efficiency and the charge extraction into highly efficient solar devices. This feature has drawn the attention of analogous hot topics as photocatalysis for carrying out more efficiently the degradation of organic compounds. However, the photo-oxidation ability of perovskite depends not only on its excellent light-harvesting properties but also on the surface chemical environment provided during its synthesis. Accordingly, we studied the role of surface chemical states of MHP-based nanocrystals (NCs) synthesized by hot-injection (H-I) and anion-exchange (A-E) approaches on their photocatalytic (PC) activity for the oxidation of β-naphthol as a model system. We concluded that iodide vacancies are the main surface chemical states that facilitate the formation of superoxide ions, O₂^●-, which are responsible for the PC activity in A-E-MHP. Conversely, the PC performance of H-I-MHP is related to the appropriate balance between band gap and a highly oxidizing valence band. This work offers new insights on the surface properties of MHP related to their catalytic activity in photochemical applications.

Enhanced Performance and Stability of TiO2 -Nanoparticles-Based Perovskite Solar Cells Employing a Cheap Polymeric Surface Modifier

Interface engineering of TiO₂ nanoparticles (NPs)-based perovskite solar cells (PVSCs) is often necessary to facilitate the extraction and transport of charge carriers. In this work, poly[{9,9-bis[3'-(N,N-dimethyl)propyl]-2,7-fluorene}-alt-2,7-(9,9-dioctylfluorene)] (PFN) and polystyrene (PS) are demonstrated to be effective surface modifiers of the TiO₂ NPs electron-transporting layer in n-i-p PVSCs. The low-cost insulating polymer PS performs better than the PFN conjugated polymer owing to its high film quality, low surface energy and insulating characteristics. A peak power conversion efficiency (PCE) of 15.09 % with an open-circuit voltage (V_OC ) of 1.05 V and a PCE of 17.13 % with an ultrahigh V_OC of 1.18 V is achieved with TiO₂ NPs/PS-based PVSCs using poly[2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene] (MEH-PPV) and spiro-OMeTAD, respectively, as the hole-transporting material.

Enhanced in vitro biocompatibility and osteogenesis of titanium substrates immobilized with dopamine-assisted superparamagnetic Fe3O4 nanoparticles for hBMSCs

Titanium (Ti) is an ideal bone substitute due to its superior bio-compatibility and remarkable corrosion resistance. However, in order to improve the osteoconduction and osteoinduction capacities in clinical applications, different kinds of surface modifications are typically applied to Ti alloys. In this study, we fabricated a tightly attached polydopamine-assisted Fe3O4 nanoparticle coating on Ti with magnetic properties, aiming to improve the osteogenesis of the Ti substrates. The PDA-assisted Fe3O4 nanoparticle coatings were characterized by scanning electron microscopy, energy dispersive spectroscopy, atomic force microscopy and water contact angle measurements. The cell attachment and proliferation rate of the human bone mesenchymal stem cells (hBMSCs) on the Ti surface significantly improved with the Fe3O4/PDA coating when compared with the pure Ti without a coating. Furthermore, the results of in vitro alkaline phosphatase (ALP) activity at 7 and 14 days and alizarin red S staining at 14 days showed that the Fe3O4/PDA coating on Ti promoted the osteogenic differentiation of hBMSCs. Moreover, hBMSCs co-cultured with the Fe3O4/PDA-coated Ti for approximately 14 days also exhibited a significantly higher mRNA expression level of ALP, osteocalcin and runt-related transcription factor-2 (RUNX2). Our in vitro results revealed that the present PDA-assisted Fe3O4 nanoparticle surface coating is an innovative method for Ti surface modification and shows great potential for clinical applications.