Meta-Alkoxy-Substituted Difluoroboron Dibenzoylmethane Complexes as Environment-Sensitive Materials

Mechanofluorochromic behaviors and latent fingerprint detection of triphenylamine-based compounds with mono-/bis-BF2 fluorophores

To better understand the relationship between molecular structure of the mono-/bis-BF2-core compounds and mechanofluoroboron behaviors, two pyridine-based difluoroboron compounds with triphenylamine group (TPA-ts-BF2 and TPA-ts-2BF2) were designed and successfully synthesized, which TPA-ts-BF2 including a BF2 fluorophore and TPA-ts-2BF2 containing the bisBF2 fluorophores. Based on the photophysical properties measurements results, it was found that TPA-ts-2BF2 had more excellent intramolecular charge transfer characteristics than that of TPA-ts-BF2, and exhibited significant aggregation-induced emission activity, however, TPA-ts-BF2 displayed typical aggregation-caused quenching phenomenon. Meanwhile, the emission spectrum of the solid powders of TPA-ts-2BF2 was red-shifted 52 nm after grinding, that of TPA-ts-BF2 was red-shifted 46 nm, which was resulted from crystalline state switching to amorphous state. According to the theoretical calculations, we conjectured that TPA-ts-BF2 with uncoordinated amide linkage moiety had a tendency to forming a more twisted conformance and higher molecular polarity, which made that mechanofluorochromic behavior was worse than that of TPA-ts-2BF2. Additionally, TPA-ts-2BF2 was applied to latent fingerprint detection due to its prime aggregation-induced emission property.

Synthesis, Crystal Structure, and Photophysical Properties of Bromothiophene-Functionalized BF2-Curcuminoid as a Versatile Building Block

A novel bromothiophene-functionalized BF2-curcuminoid (BTC-BF2) is synthesized by Knoevenagel condensation reaction. The structure of BTC-BF2 is determined by 1H-nuclear magnetic resonance (1H NMR), 13C-nuclear magnetic resonance (13C NMR), and high-resolution mass spectrometry (HRMS). Moreover, a nearly coplanar single crystal structure is successfully obtained and form a mesh structure through intermolecular multiple C─H···F hydrogen bond interactions. As expected, as-prepared BTC-BF2 exhibits solvent-dependent photophysical properties in solvents with different polarity and an intense red solid-state fluorescence. Density functional theory calculations further verify the relationships between its intrinsic electronic features and the photophysical properties. For its potential application aspect, BTC-BF2 shows a certain ability to generate singlet oxygen under irradiation with 530 nm green light. Moreover, BTC-BF2 can be utilized as versatile building block to construct novel far-red or NIR BF2-curcuminoid complexes for widely biological applications.

Efficient intersystem crossing and tunable ultralong organic room-temperature phosphorescence via doping polyvinylpyrrolidone with polyaromatic hydrocarbons

Polymer-based pure organic room-temperature phosphorescent materials have tremendous advantages in applications owing to their low cost, vast resources, and easy processability. However, designing polymer-based room-temperature phosphorescent materials with large Stokes shifts as key requirements in biocompatibility and environmental-friendly performance is still challenging. By generating charge transfer states as the gangplank from singlet excited states to triplet states in doped organic molecules, we find a host molecule (pyrrolidone) that affords charge transfer with doped guest molecules, and excellent polymer-based organic room-temperature phosphorescent materials can be easily fabricated when polymerizing the host molecule. By adding polyaromatic hydrocarbon molecules as electron-donor in polyvinylpyrrolidone, efficient intersystem crossing and tunable phosphorescent from green to near-infrared can be achieved, with maximum phosphorescence wavelength and lifetime up to 757 nm and 3850 ms, respectively. These doped polyvinylpyrrolidone materials have good photoactivation properties, recyclability, advanced data encryption, and anti-counterfeiting. This reported design strategy paves the way for the design of polyvinylpyrrolidone-based room-temperature phosphorescent materials.

Polymer-Based Long-Lived Phosphorescence Materials over a Broad Temperature Based on Coumarin Derivatives as Information Anti-Counterfeiting

The development of new polymer-based room-temperature phosphorescence materials is of great significance. By a special molecule design and a set of feasible property-enhancing strategies, coumarin derivatives (CMDs, M_a-M_f) were doped into polyvinyl alcohol (PVA), polyacrylamide (PAM), corn starch, and polyacrylonitrile (PAN) as information anti-counterfeiting. CMDs-doped PVA and CMDs-doped corn starch films showed long-lived phosphorescence emissions up to 1246 ms (M_a-PVA) and 697 ms (M_a-corn starch), reaching over 10 s afterglow under naked eye observation under ambient conditions. Significantly, CMDs-doped PAM films can display long-lived phosphorescence emissions in a wide temperature range (100-430 K). For example, the M_e-PAM film has a phosphorescence lifetime of 16 ms at 430 K. The use of PAM with the strong polarity and rigidity has expanded the temperature range of long-life polymer-based phosphorescent materials. The present long-lived phosphorescent systems provide the possibility for developing new polymer-based organic afterglow materials with robust phosphorescence.

An indolo[3,2,1-jk]carbazole-fused multiple resonance-induced thermally activated delayed fluorescence emitter for an efficient narrowband OLED

By inserting a tricoordinate B atom into an indolo[3,2,1-jk]carbazole precursor, an efficient fused multiple resonance-induced thermally activated delayed fluorescence emitter was prepared, which exhibits a narrowband emission and a considerable reverse intersystem crossing rate. The corresponding organic light-emitting diode displays an external quantum efficiency of 27.2% with a suppressed efficiency roll-off.

Recent advances in the synthesis of luminescent tetra-coordinated boron compounds

Tetra-coordinated boron compounds offer a plethora of luminescent materials. Different chelation around the boron center (O,O-, N,C-, N,O-, and N,N-) has been explored to tune the electronic and photophysical properties of tetra-coordinated boron compounds. A number of fascinating molecules with interesting properties such as aggregation induced emission, mechanochromism and tunable emission by changing the solvent polarity were realised. Owing to their rich and unique properties, some of the molecules have shown applications in making optoelectronic devices, probes and so on. This perspective provides an overview of the recent developments of tetra-coordinated boron compounds and their potential applications.

Folding-Induced Spin-Orbit Coupling Enhancement for Efficient Pure Organic Room-Temperature Phosphorescence

For the direct luminescence of triplet excitons, different mechanisms have been proposed for realizing pure organic room-temperature phosphorescence (RTP). To further verify the mechanism of folding-induced spin-orbit coupling (SOC) enhancement, two analogues of thianthrene (TA) were introduced by gradually replacing the sulfur atom with an oxygen atom for a systematical comparison, corresponding to phenoxathiine (PX) and dioxins (DX) molecules with increasing folding dihedral angles (or decreasing degrees of folding). Photophysical measurements show an obviously enhanced RTP efficiency from DX and PX to TA, which is consistent with their greatly enhanced SOC with a decrease in folding dihedral angle. The folding angle-dependent SOC calculations for each molecule reveal that this enhanced RTP is dominated by folding-induced SOC enhancement, in contrast with the negligible heavy-atom effect from oxygen to sulfur. This work further validates the rationality of the folding-induced SOC enhancement mechanism, which provides an innovative molecular design strategy for developing efficient pure organic RTP materials using folding structures.

Recent Advances on Host-Guest Material Systems toward Organic Room Temperature Phosphorescence

The design and characterization of purely organic room-temperature phosphorescent (RTP) materials for optoelectronic applications is currently the focus of research in the field of organic electronics. Particularly, with the merits of preparation controllability and modulation flexibility, host-guest material systems are encouraging candidates that can prepare high-performance RTP materials. By regulating the interaction between host and guest molecules, it can effectively control the quantum efficiency, luminescent lifetime, and color of host-guest RTP materials, and even produce RTP emission with stimuli-responsive features, holding tremendous potential in diverse applications such as encryption and anti-counterfeiting, organic light-emitting diodes, sensing, optical recording, etc. Here a roundup of rapid achievement in construction strategies, molecule systems, and diversity of applications of host-guest material systems is outlined. Intrinsic correlations between the molecular properties and a survey of recent significant advances in the development of host-guest RTP materials divided into three systems including rigid matrix, exciplex, and sensitization are presented. Providing an insightful understanding of host-guest RTP materials and offering a promising platform for high throughput screening of RTP systems with inherent advantages of simple material preparation, low-cost, versatile resource, and controllably modulated properties for a wide range of applications is intended.

Room temperature tunable multicolor phosphorescent polymers for humidity detection and information encryption

Amorphous polymer-based room temperature phosphorescence (RTP) materials exhibiting tunable emission colors have received tremendous attention and are extremely challenging to prepare. Herein, polyacrylamide-based RTP materials with tunable multicolor emission were prepared via copolymerizing phosphor with concentration dependent luminescence colors and acrylamide with different molar ratios. The hydrogen bonding interactions and chemically crosslinked structures in these polymers effectively restrict the mobility of phosphors and activate efficient RTP emission. The molar ratio of phosphor and acrylamide has a significant influence on the photophysical properties of these polymers, which can be used to fabricate multicolor materials. In addition, the RTP intensity decreases with increasing humidity due to the disassociation of hydrogen bonding by adsorption of water, manifesting as a humidity sensor. Benefiting from the distinguishable RTP lifetimes and the responsiveness to humidity, triple encoding for information encryption is successfully realized.

A polymer with tunable multicolor was prepared via copolymerizing a phosphor with concentration dependent luminescence and acrylamide based on chemical crosslinking and hydrogen bonding interactions for humidity detection and information encryption.

Rational Design and Facile Synthesis of Dual-State Emission Fluorophores: Expanding Functionality for the Sensitive Detection of Nitroaromatic Compounds

Six novel benzimidazole-based D-π-A compounds 4 a-4 f were concisely synthesized by attaching different donor/acceptor units to the skeleton of 1,3-bis(1H-benzimidazol-2-yl)benzene on its 5-position through an ethynyl link. Due to the twisted conformation and effective conjugation structure, these dual-state emission (DSE) molecules show intense and multifarious photoluminescence, and their fluorescence quantum yields in solution and solid state can be up to 96.16 and 69.82 %, respectively. Especially, for excellent photostability, obvious solvatofluorochromic and extraordinary wide range of solvent compatibility, DSE molecule 4 a is a multifunctional fluorescent probe for the visual detection of nitroaromatic compounds (NACs) with the limit of detection as low as 10^-7 M. The quenching mechanism has been proved as the results of photoinduced electron transfer and fluorescence resonance energy transfer processes. Importantly, probe 4 a can sensitively detect NACs not only in real water samples, but also on 4 a-coated strips and 4 a@PBAT thin films.

Metal-Free Organic Luminophores that Exhibit Dual Fluorescence and Phosphorescence Emission at Room Temperature

Dual-fluorescent-phosphorescent compounds have attracted increasing attention in various fields, such as bio-imaging, data protection/encryption, ratiometric luminescence sensing, and white-light emission. Conventional dual-emissive compounds contain a phosphorescent organometallic complex of a precious metal, such as iridium or platinum. However, the use of precious metals in organic materials has several drawbacks. This Minireview focuses on precious-metal-free organic light-emitting materials that exhibit dual fluorescence and phosphorescence emission in the solid state at room temperature to produce bimodal steady-state emission spectra. The dual emitters presented herein are categorized into the following six compound classes: (1) difluoroboron diaroylmethanes, (2) diarylketones, (3) diarylsulfones, (4) triazines and pyrimidines, (5) fused phenazines, and (6) N-arylcarbazoles.

Array-Based Discriminative Optical Biosensors for Identifying Multiple Proteins in Aqueous Solution and Biofluids

Identification of proteins is an important issue both in medical research and in clinical practice as a large number of proteins are closely related to various diseases. Optical sensor arrays with recognition ability have been flourished to apply for distinguishing multiple chemically or structurally similar analytes and analyzing unknown or mixed samples. This review gives an overview of the recent development of array-based discriminative optical biosensors for recognizing proteins and their applications in real samples. Based on the number of sensor elements and the complexity of constructing array-based discriminative systems, these biosensors can be divided into three categories, which include multi-element-based sensor arrays, environment-sensitive sensor arrays and multi-wavelength-based single sensing systems. For each strategy, the construction of sensing platform and detection mechanism are particularly introduced. Meanwhile, the differences and connections between different strategies were discussed. An understanding of these aspects may help to facilitate the development of novel discriminative biosensors and expand their application prospects.

Synthesis and synergistic studies of isatin based mixed ligand complexes as potential antifungal therapeutic agents

Metal based drugs are important class of chemotherapeutic agents that have the potential to circumvent drug resistance. Increasing drug resistance, treatment failures and limited treatment options necessitates the development of new therapeutic drugs with different mechanisms of action. Towards this direction, we synthesized a series of isatin based mixed ligand complexes of [Cu(dbm)LClH₂O] (mlc1), [Co(dbm)LCl₂]^‒(mlc2) and [Ni(dbm)LClH₂O] (mlc3) and evaluated their antifungal activity alone and in combination with fluconazole (FLC) against seven different Candida albicans isolates. The insight mechanism of antifungal action was revealed by studying apoptosis via terminal deoxynucleotidyl transferase dUTP nick-end labeling (TUNEL) assay. The study revealed that all these compounds showed antifungal activity at varying concentrations with mlc3 as the most potent compound with minimum inhibitory concentration ranging from 0.5–8 μg/mL and minimum fungicidal concentration ranging from 4–16 μg/mL. Upon combination with FLC, most of the interactions were either synergistic (54 %) or additive (32 %) with no antagonistic combination against any of the tested isolate. The study on their mechanism of action revealed that these compounds show apoptotic effect on C. albicans at sub-inhibitory concentrations, suggesting that strategies to target this process may augment the current antifungal treatment modalities.

Spectroscopic and quantum chemical study of difluoroboron β-diketonate luminophores: Isomeric acetylnaphtholate chelates

The electronic structure and optical properties of the isomeric difluoroboron β-diketonates, 2,2-difluoro-4-methylnaphtho-[2,1-e]-1,3,2-dioxaborin (I) and 2,2-difluoro-4-methylnaphtho-[1,2-e]-1,3,2-dioxaborin (II), were studied by means of X-ray photoelectron, absorption and luminescence spectroscopies. The experimental results were interpreted using high-level ab initio quantum chemical computations, including the algebraic-diagrammatic construction method for the polarization propagator of the second and third orders (ADC(2) and ADC(3)), the outer-valence Green's function (OVGF) method, and the time-dependent density functional (TDDFT) approach. The X-ray photoelectron measurements were assigned in the entire energy range using the results of the Kohn-Sham orbital calculations which employed the B3LYP functional. Pronounced hypsochromic shift of crystal-state fluorescence was observed in I upon the lowering of temperature, which can be explained by the deterioration of the conditions for excimers formation. According to our results, remarkable feature of II, absent in I, is its phosphorescence at room temperature. Basing on our calculations, a decay mechanism for the S₁ state was proposed, explaining the observed differences in the phosphorescence of I and II.

Mechanochromic Wide-Spectrum Luminescence Based on a Monoboron Complex

A reversible mechanochromic luminescent material based on a simple tetrahedral monoboron complex (B-1) is described. Interestingly, in addition to amorphous powders (P), the compound could exist in three unique crystal states (A, B, and C), showing efficient green-to-red luminescent colors, which is a result of wane and wax of dual emissions of the compound. Surprisingly, one of the emissions increases significantly with increasing temperature, fully offsetting the quenching effect of temperature-assisted internal conversion process. The four states are fully interconvertible through grinding and heating, allowing color writing/painting with a single ink.

Turn-on exciplex fluorescence induced by complexation of nonfluorescent pentafluorinated dibenzoylmethanatoboron difluoride with benzene and its derivatives

A new pentafluorinated derivative of (dibenzoylmethanato)boron difluoride (5F-DBMBF2) was synthesized and studied as an “off–on” fluorescent probe for benzene derivatives with a reversible detection capability.

Room-Temperature Phosphorescence in Pure Organic Materials: Halogen Bonding Switching Effects

Organic room-temperature phosphorescence (ORTP), when combined with external stimuli-responsive capability, is very attractive for sensors and bio-imaging devices, but remains challenging. Herein, by doping two β-iminoenamine-BF₂ derivatives (S-2CN and S-2I) into a 4-iodoaniline (I-Ph-NH₂ ) crystalline matrix, the formation of S-2CN⋅⋅⋅I-Ph-NH₂ and S-2I⋅⋅⋅I-Ph-NH₂ halogen bonds leads to bright-red RTP emissions from these two host-guest doped crystals (hgDCs) with quantum efficiencies up to 13.43 % and 15.96 %, respectively. Upon treatment with HCl, the competition of I-Ph-NH₂ ⋅HCl formation against S-2I⋅⋅⋅I-Ph-NH₂ halogen bonding switches off the red RTP from S-2I/I-Ph-NH₂ hgDCs, whereas the stable halogen-bonded S-2CN⋅⋅⋅I-Ph-NH₂ ensures red RTP from S-2CN/I-Ph-NH₂ hgDCs remains unchanged. A security protection luminescence pattern by using these different HCl-responsive RTP behaviors was designed.