Solvothermal Synthesis of Hierarchical TiO2 Microstructures with High Crystallinity and Superior Light Scattering for High-Performance Dye-Sensitized Solar Cells

Progress on two-dimensional binary oxide materials

Two-dimensional van der Waals (2D vdW) materials have attracted much attention because of their unique electronic and optical properties. Since the successful isolation of graphene in 2004, many interesting 2D materials have emerged, including elemental olefins (silicene, germanene, etc.), transition metal chalcogenides, transition metal carbides (nitrides), hexagonal boron, etc. On the other hand, 2D binary oxide materials are an important group in the 2D family owing to their high structural diversity, low cost, high stability, and strong adjustability. This review systematically summarizes the research progress on 2D binary oxide materials. We discuss their composition and structure in terms of vdW and non-vdW categories in detail, followed by a discussion of their synthesis methods. In particular, we focus on strategies to tailor the properties of 2D oxides and their emerging applications in different fields. Finally, the challenges and future developments of 2D binary oxides are provided.

Hierarchically ordered macroporous TiO2 architecture via self-assembled strategy for environmental remediation

Hierarchical orderd macroporous TiO₂ architecture (HOMTA) was prepared with aid of ethylenediamine (EDA) and investigated the impact of amine molecules on the properties of TiO₂ architecture. The different variation of amine molecules (EDA) leads to tunning the morphology under hydrothermal approach which is confirmed by FESEM and TEM analysis. The XRD and Raman studies confirms the crystal structure of anatase and brookite phase of TiO₂. The surface of the architecture strongly depended on the concentration of EDA which plays a vital role in surface area which is revealed by Brunauer Emmett-Teller (BET) analysis. The obtained HOMTA was employed as photocatalyst and active photoanode in the dye sensitized solar cells (DSSC). The DSSC device exhibits excellent efficiency (η) of 5.27% for the EDA capped TiO₂ (S5) which had high surface area (167.11 m²/g) for better dye loading, whereas the lower concentration of EDA capped TiO₂ (S1, S2, S3 and S4) resulted the efficiency of 2.14, 3.90, 3.25 and 4.37%, respectively. The efficiency of photocatlysis degradation of the prepared samples (S1, S2, S3, S4 and S5) was 94.8, 90.47, 91.41, 91.32 and 93.75% under light source. The excellent photocatalysis property was achieved by S5 within 6 min due to high surface area which inducing more active site.

A self-powered photoelectrochemical ultraviolet photodetector based on Ti3C2Tx/TiO2in situformed heterojunctions

Transition metal carbides and nitrides (MXenes), as a large family of emerging two-dimensional materials, have demonstrated extraordinary performance in many fields such as electronics, optics and energy storage. However, their susceptibility to oxidation during preparation and storage in ambient air environment is undesirable for long-term and stable applications. Here, we have demonstrated that the spontaneous oxidation of Ti₃C₂T_xcan be harnessed ingeniously to prepare Ti₃C₂T_x/TiO₂in situformed heterojunctions. Furthermore, a self-powered ultraviolet photodetector was constructed based on the photoelectrochemical performance of Ti₃C₂T_x/TiO₂heterojunctions. Since the highly conductive Ti₃C₂T_xcan promote the separation and transfer of photogenerated carriers in TiO₂, the prepared photodetector exhibits high responsivity (2.06 mA W^-1), short rise and decay times (45 and 69 ms) and long-term stability. This work demonstrates the controllable synthesis of Ti₃C₂T_x/TiO₂heterojunctions and provides a new promising potential of MXenes for photodetection applications.

Fabrication and Photocatalytic Properties of Electrospun Fe-Doped TiO2 Nanofibers Using Polyvinyl Pyrrolidone Precursors

For the removal of pollutants, a modified TiO₂ photocatalyst is attracting attention. Fe-doped TiO₂ nanofibers were prepared through a combination of electrospinning and calcination. Morphological characterization of the sample was conducted using field-emission scanning electron and transmission electron microscopy. The crystal structure of each sample was analyzed using high-resolution transmission electron microscopy, selected area electron diffraction, and Fast Fourier Transform imaging. The average diameter of the Fe-doped TiO₂ nanofibers was measured to be 161.5 nm and that of the pure TiO₂ nanofibers was 181.5 nm. The crystal phase when heat treated at 350 °C was anatase for TiO₂ nanofibers and rutile for Fe-doped TiO₂ nanofibers. The crystal phase of the TiO₂ matrix was easily transitioned to rutile by Fe-doping. The photocatalytic performance of each sample was compared via the photodegradation of methylene blue and acid orange 7 under ultraviolet and visible light irradiation. In the Fe-doped TiO₂ nanofibers, photodegradation rates of 38.3% and 27.9% were measured under UV irradiation and visible light, respectively. Although other catalysts were not activated, the photodegradation rate in the Fe-doped TiO₂ nanofibers was 9.6% using acid orange 7 and visible light. For improved photocatalytic activity, it is necessary to study the concentration control of the Fe dopant.

Green Synthesis and Applications of ZnO and TiO2 Nanostructures

Over the last two decades, oxide nanostructures have been continuously evaluated and used in many technological applications. The advancement of the controlled synthesis approach to design desired morphology is a fundamental key to the discipline of material science and nanotechnology. These nanostructures can be prepared via different physical and chemical methods; however, a green and ecofriendly synthesis approach is a promising way to produce these nanostructures with desired properties with less risk of hazardous chemicals. In this regard, ZnO and TiO2 nanostructures are prominent candidates for various applications. Moreover, they are more efficient, non-toxic, and cost-effective. This review mainly focuses on the recent state-of-the-art advancements in the green synthesis approach for ZnO and TiO2 nanostructures and their applications. The first section summarizes the green synthesis approach to synthesize ZnO and TiO2 nanostructures via different routes such as solvothermal, hydrothermal, co-precipitation, and sol-gel using biological systems that are based on the principles of green chemistry. The second section demonstrates the application of ZnO and TiO2 nanostructures. The review also discusses the problems and future perspectives of green synthesis methods and the related issues posed and overlooked by the scientific community on the green approach to nanostructure oxides.

Synergic effect of graphene and core-shells structured Au NR@SiO2@TiO2 in dye-sensitized solar cells

Graphene and Au nanorods (AuNRs) coated with SiO₂@TiO₂ double shells (AuNR@SiO₂@TiO₂) were incorporated to form novel composite photoanodes in dye sensitized solar cells (DSSCs). The performances of the photoanodes and DSSCs are studied systematically. The short circuit current density (J _sc) and power conversion efficiency (PCE) of these composited DSSCs were greatly enhanced and the influences of the graphene, AuNRs and the SiO₂@TiO₂ double shells were revealed. The optimal properties with the maximal J _sc of 16.26 mA cm^-2 and PCE of 8.08% are obtained in the DSSC co-doped with graphene and AuNR@SiO₂@TiO₂, significantly higher than those of the conventional DSSC with pure TiO₂ photoanode by 37.7% and 32.9%, respectively. These significant enhancements in J _sc and PCE are attributed to the synergistic effect of graphene, the local surface plasma resonance of AuNRs, as well as the outer SiO₂@TiO₂ double shells, which result in the increased specific surface area and dye adsorption, the increased light absorption, the decreased charge transfer resistance R ₂ and electron recombination and thus the increased J _sc and PCE of the DSSCs.

Rapid Growth of TiO₂ Nanoflowers via Low-Temperature Solution Process: Photovoltaic and Sensing Applications

This paper reports the rapid synthesis, characterization, and photovoltaic and sensing applications of TiO₂ nanoflowers prepared by a facile low-temperature solution process. The morphological characterizations clearly reveal the high-density growth of a three-dimensional flower-shaped structure composed of small petal-like rods. The detailed properties confirmed that the synthesized nanoflowers exhibited high crystallinity with anatase phase and possessed an energy bandgap of 3.2 eV. The synthesized TiO₂ nanoflowers were utilized as photo-anode and electron-mediating materials to fabricate dye-sensitized solar cell (DSSC) and liquid nitroaniline sensor applications. The fabricated DSSC demonstrated a moderate conversion efficiency of ~3.64% with a maximum incident photon to current efficiency (IPCE) of ~41% at 540 nm. The fabricated liquid nitroaniline sensor demonstrated a good sensitivity of ~268.9 μA mM⁻¹ cm⁻² with a low detection limit of 1.05 mM in a short response time of 10 s.

Hierarchical TiO2 microspheres composed with nanoparticle-decorated nanorods for the enhanced photovoltaic performance in dye-sensitized solar cells

Hierarchical TiO₂ microspheres composed of nanoparticle-decorated nanorods (NP-MS) were successfully prepared with a two-step solvothermal method. There were three benefits associated with the use of NP-MS as a photoanode material. The decoration of nanoparticles improved the specific surface area and directly enhanced the dye loading ability. Rutile nanorods serving as electron transport paths resulted in fast electron transport and inhibited the charge recombination process. The three-dimensional hierarchical NP-MS structure supplied a strong light scattering capability and good connectivity. Thus, the hierarchical NP-MS combined the beneficial properties of improved scattering capability, dye loading ability, electron transport and inhibited charge recombination. Attributed to these advantages, a photoelectric conversion efficiency of up to 7.32% was obtained with the NP-MS film-based photoanode, resulting in a 43.5% enhancement compared to the efficiency of the P25 film-based photoanode (5.10%) at a similar thickness. Compared to traditional photoanodes with scattering layers or scattering centers, the fabrication process for single layered photoanodes with enhanced scattering capability was very simple. We believe the strategy would be beneficial for the easy fabrication of efficient dye-sensitized solar cells.

Hierarchical NP-MS combines the beneficial properties of improved scattering capability, dye loading ability, electron transport and inhibited charge recombination. The photoelectric conversion efficiency up to 7.32% has been obtained.

Cd/In-Codoped TiO2 nanochips for high-efficiency photocatalytic dye degradation

Titanium dioxide has been widely investigated in the field of photocatalysis research. However, the wide bandgap (3.2 eV) greatly limits its practical applications because only ultraviolet light can be absorbed by bare TiO2. Herein, we report a facile approach to prepare Cd/In-codoped TiO2 nanochips with the capability of visible light absorption. Such bimetallic-doped TiO2 was synthesized through a two-step process: Cd/In/S-TiO2 gels were first synthesized by mixing the preformed Cd-In-S supertetrahedral nanoclusters with a titanium source, and the subsequent pyrolytic process effectively converted the gels into Cd/In-TiO2 nanochips with a thickness of ∼2.19 nm and a uniform diameter of ∼10.60 nm. Interestingly, the absorption band of Cd/In-TiO2 nanochips was adjusted by pyrolysis temperature, which further regulated the photocatalytic efficiency of dye degradation under visible light. Current research demonstrates that doping TiO2 by multimetallic sulfide nanoclusters opens up a new door to further enrich the dopants in TiO2 and broaden their potential applications.