A Copper(II)-Paddlewheel Metal-Organic Framework with Exceptional Hydrolytic Stability and Selective Adsorption and Detection Ability of Aniline in Water

Combined Effect of Hydrophilic Pore and the Type of Protons on Proton Conductivity in Porous Metal-Organic Frameworks: A Feasible Approach to Achieve a Super Proton Conductor under Hydrated Conditions

There has been a steady growth of interest in proton-conductive metal-organic frameworks (MOFs) due to their potential utility in proton-exchange membrane fuel cells. To attain a super proton conductivity (>1 × 10-2 S cm-1) in a MOF-based proton conductor is a key step toward practical application. Currently, most studies are focused on enhancing the proton conductivity of porous MOFs by controlling a single factor, such as the type of protons or hydrophilic pore or hydrogen bond. However, a limited contribution from a single factor cannot afford to remarkably increase the proton conductivity of the MOF and form a super proton conductor. Herein, we constructed two distinct porous MOFs, {(H3O+)4[Cu12(ci)12(OH)4(H2O)12]·3H2O·9DMF} (Cu-ci-3D, H2ci = 1H-indazole-5-carboxylic acid, DMF = N,N'-dimethylformamide) and {[Co(Hppca)2]·2HN(CH3)2·CH3OH·2H2O} (Co-ppca-2D, H2ppca = 5-(pyridin-3-yl)-1H-pyrazole-3-carboxylic acid), to tune their proton conductivities at high relative humidity (RH) using the combined effect of hydrophilic pore and the type of protons, ultimately achieving super proton conduction. Excitingly, Cu-ci-3D indeed harvests a super proton conductivity of 1.37 × 10-2 S cm-1 at 353 K and ∼97% RH, superior to some previously reported MOF-based proton conductors. The results present a unique perspective for developing high-performance MOF-based proton conductors and understanding their structure-performance relationships.

Ordered Transfer from 3D-Oriented MOF Superstructures to Polymeric Films: Microfabrication, Enhanced Chemical Stability, and Anisotropic Fluorescent Patterns

Films and patterns of 3D-oriented metal-organic frameworks (MOFs) afford well-ordered pore structures extending across centimeter-scale areas. These macroscopic domains of aligned pores are pivotal to enhance diffusion along specific pathways and orient functional guests. The anisotropic properties emerging from this alignment are beneficial for applications in ion conductivity and photonics. However, the structure of 3D-oriented MOF films and patterns can rapidly degrade under humid and acidic conditions. Thus, more durable 3D-ordered porous systems are desired for practical applications. Here, oriented porous polymer films and patterns are prepared by using heteroepitaxially oriented N3-functionalized MOF films as precursor materials. The film fabrication protocol utilizes an azide-alkyne cycloaddition on the Cu2(AzBPDC)2DABCO MOF. The micropatterning protocol exploits the X-ray sensitivity of azide groups in Cu2(AzBPDC)2DABCO, enabling selective degradation in the irradiated areas. The masked regions of the MOF film retain their N3-functionality, allowing for subsequent cross-linking through azide-alkyne coupling. Subsequent acidic treatment removes the Cu ions from the MOF, yielding porous polymer micro-patterns. The polymer has high chemical stability and shows an anisotropic fluorescent response. The use of 3D-oriented MOF systems as precursors for the fabrication of oriented porous polymers will facilitate the progress of optical components for photonic applications.

Building respirable powder architectures: utilizing polysaccharides for precise control of particle morphology for enhanced pulmonary drug delivery

INTRODUCTION

Dry powder inhaler (DPI) formulations are gaining attention as universal formulations with applications in a diverse range of drug formulations. The practical application of DPIs to pulmonary drugs requires enhancing their delivery efficiency to the target sites for various treatment modalities. Previous reviews have not explored the relation between particle morphology and delivery to different pulmonary regions. This review introduces new approaches to improve targeted DPI delivery using novel particle design such as supraparticles and metal-organic frameworks based on cyclodextrin.

AREAS COVERED

This review focuses on the design of DPI formulations using polysaccharides, promising excipients not yet approved by regulatory agencies. These excipients can be used to design various particle morphologies by controlling their physicochemical properties and manufacturing methods.

EXPERT OPINION

Challenges associated with DPI formulations include poor access to the lungs and low delivery efficiency to target sites in the lung. The restricted applicability of typical excipients contributes to their limited use. However, new formulations based on polysaccharides are expected to establish a technological foundation for the development of DPIs capable of delivering modalities specific to different lung target sites, thereby enhancing drug delivery.

Enabling C2H2/CO2 Separation Under Humid Conditions with a Methylated Copper MOF

As a unique subclass of metal-organic frameworks (MOFs), MOFs with open metal site (OMS) are demonstrated efficient gas separation performance through pi complexation with unsaturated hydrocarbons. However, their practical application faces the challenge of humidity that causes structure degradation and completive binding at the OMS. In this work, the effect of linker methylation of a copper MOF (BUT-155) on the C2H2/CO2 separation performance under humid condition is evaluated. The water adsorption isotherm, adsorption kinetics, and breakthrough under dry and humid conditions are performed. The BUT-155 with methylated linker exhibits lower water uptake and adsorption kinetics under humid condition (RH = 20%), in comparison with HKUST-1. Therefore, the C2H2/CO2 separation performance of BUT-155 is much less affected by water, especially under higher gas flow rate. Moreover, the dynamic C2H2/CO2 separation performance of BUT-155 can maintain five breakthrough cycles under humid conditions (RH = 20% and RH = 80%) without obvious performance degradation.

Progressive Insights into Metal-Organic Frameworks and Metal-Organic Framework-Membrane Composite Systems for Wastewater Management

The sustainable management of wastewater through recycling and utilization stands as a pressing concern in the trajectory of societal advancement. Prioritizing the elimination of diverse organic contaminants is paramount in wastewater treatment, garnering significant attention from researchers worldwide. Emerging metal-organic framework materials (MOFs), bridging organic and inorganic attributes, have surfaced as novel adsorbents, showcasing pivotal potential in wastewater remediation. Nevertheless, challenges like limited water stability, elevated dissolution rates, and inadequate hydrophobicity persist in the context of wastewater treatment. To enhance the performance of MOFs, they can be modified through chemical or physical methods, and combined with membrane materials as additives to create membrane composite materials. These membrane composites, derived from MOFs, exhibit remarkable characteristics including enhanced porosity, adjustable pore dimensions, superior permeability, optimal conductivity, and robust water stability. Their ability to effectively sequester organic compounds has spurred significant research in this field. This paper introduces methods for enhancing the performance of MOFs and explores their potential applications in water treatment. It delves into the detailed design, synthesis strategies, and fabrication of composite membranes using MOFs. Furthermore, it focuses on the application prospects, challenges, and opportunities associated with MOF composite membranes in water treatment.

Highlights in Interface of Wastewater Treatment by Utilizing Metal Organic Frameworks: Purification and Adsorption Kinetics

Polluted water has become a concern for the scientific community as it causes many severe threats to living beings. Detection or removal of contaminants present in wastewater and attaining purity of water that can be used for various purposes are a primary responsibility. Different treatment methods have already been used for the purification of sewage. There is a need for low-cost, highly selective, and reusable materials that can efficiently remove pollutants or purify contaminated water. In this regard, MOFs have shown significant potential for applications such as supercapacitors, drug delivery, gas storage, pollutant adsorption, etc. The outstanding structural diversity, substantial surface areas, and adjustable pore sizes of MOFs make them superior candidates for wastewater treatment. This Review provides an overview of the interaction science and engineering (kinetic and thermodynamic aspects with interactions) underpinning MOFs for water purification. First, fundamental strategies for the synthesis methods of MOFs, different categories, and their applicability in wastewater treatment are summarized, followed by a detailed explanation of various interaction mechanisms. Finally, current challenges and future outlooks for research on MOF materials toward the adsorption of hazardous components are discussed. A new avenue for modifying their structural characteristics for the adsorption and separation of hazardous materials, which will undoubtedly direct future work, is also summarized.

Fine Tuning the Hydrophobicity of a New Three-Dimensional Cu2+ MOF through Single Crystal Coordinating Ligand Exchange Transformations

The synthesis, characterization, and single-crystal-to-single-crystal (SCSC) exchange reactions of a new 3D Cu2+ MOF based on 5-aminoisophthalic acid (H2AIP), [Cu6(μ3-ΟΗ)3(ΑΙΡ)4(HΑΙΡ)]n·6nDMF·nH2O - UCY-16·6nDMF·nH2O, are reported. It exhibits a 3D structure based on two [Cu4(μ3-OH)2]6+ butterfly-like secondary building units, differing in their peripheral ligation, bridged through HAIP-/AIP2- ligands. This compound displays the capability to exchange the coordinating ligand(s) and/or guest solvent molecules through SCSC reactions. Interestingly, heterogeneous reactions of single crystals of UCY-16·6nDMF·nH2O with primary alcohols resulted not only in the removal of the lattice DMF molecules but also in an unprecedented structural alteration that involved the complete or partial replacement of the monoatomic bridging μ3-OH- anion(s) of the [Cu4(μ3-OH)2]6+ butterfly structural core by various alkoxy groups. Similar crystal-to-crystal exchange reactions of UCY-16·6nDMF·nH2O with long-chain aliphatic alcohols (CxH2x+1OH, x = 8-10, 12, 14, and 16) led to analogues containing fatty alcohols. Notably, the exchanged products with the bulkier alcohols UCY-16/n-CxH2x+1OH·S' (x = 6-10, 12, 14, and 16) do not mix with H2O being quite stable in this solvent, in contrast to the pristine MOF, and exhibit a hydrophobic/superhydrophobic surface as confirmed from the investigation of their water contact angles and capability to remove hydrophobic pollutants from aqueous media.

Water-stable metal-organic frameworks (MOFs): rational construction and carbon dioxide capture

Metal-organic frameworks (MOFs) are considered to be a promising porous material due to their excellent porosity and chemical tailorability. However, due to the relatively weak strength of coordination bonds, the stability (e.g., water stability) of MOFs is usually poor, which severely inhibits their practical applications. To prepare water-stable MOFs, several important strategies such as increasing the bonding strength of building units and introducing hydrophobic units have been proposed, and many MOFs with excellent water stability have been prepared. Carbon dioxide not only causes a range of climate and health problems but also is a by-product of some important chemicals (e.g., natural gas). Due to their excellent adsorption performances, MOFs are considered as a promising adsorbent that can capture carbon dioxide efficiently and energetically, and many water-stable MOFs have been used to capture carbon dioxide in various scenarios, including flue gas decarbonization, direct air capture, and purified crude natural gas. In this review, we first introduce the design and synthesis of water-stable MOFs and then describe their applications in carbon dioxide capture, and finally provide some personal comments on the challenges facing these areas.

Programmed T cells infiltration into lung metastases with harnessing dendritic cells in cancer immunotherapies by catalytic antigen-capture sponges

T lymphocytes served as immune surveillance to suppress metastases by physically interacting with cancer cells. Whereas tumor immune privilege and heterogeneity protect immune attack, it limits immune cell infiltration into tumors, especially in invasive metastatic clusters. Here, a catalytic antigen-capture sponge (CAS) containing the catechol-functionalized copper-based metal organic framework (MOF) and chloroquine (CQ) for programming T cells infiltration is reported. The intravenously injected CAS accumulates at the tumor via the folic acid-mediated target and margination effect. In metastases, Fenton-like reaction induced by copper ions of CAS disrupts the intracellular redox potential, i.e., chemodynamic therapy (CDT), thereby reducing glutathione (GSH) levels. Furthermore, CQ helps inhibit autophagy by inducing lysosomal deacidification during CDT. This process leads to the breakdown of self-defense mechanisms, which exacerbates cytotoxicity. The therapies promote the liberation of tumor-associated antigens, such as neoantigens and damage-associated molecular patterns (DAMPs). Subsequently, the catechol groups present on CAS perform as antigen reservoirs and transport the autologous tumor-associated antigens to dendritic cells, resulting in prolonged immune activation. The CAS, which is capable of forming in-situ, serves as an antigen reservoir in CDT-mediated lung metastasis and leads to the accumulation of immune cells in metastatic clusters, thus hindering metastatic tumors.

Highly Efficient Propyne/Propylene Separation in a "Flexible-Robust" and Hydrolytically Stable Cu(II)-MOF

Propyne/propylene separation is important in the petrochemical industry but challenging due to their similar physical properties and close molecular sizes. Metal-organic frameworks (MOFs) are a class of promising adsorbents for light hydrocarbon separations. Among them, the so-called "flexible-robust" MOFs combine the advantages of flexibility and rigidity in structure and could show enhanced gas separation selectivity as well as improved gas uptake at low pressure. Interpenetrated MOFs offer a platform to explore the "flexible-robust" feature of MOFs based on their subnetwork displacement in the process of gas adsorption. Herein, we present two hydrolytically stable MOFs (BUT-308 and BUT-309) with interpenetrated structures and fascinating propyne/propylene separation performance. BUT-308 is composed of interpenetrated 2D Cu(BDC-NH₂)BPB layers (H₂BDC-NH₂ = 2-aminobenzene-1,4-dicarboxylic acid; BPB = 1,4-bis(4-pyridyl)benzene), while BUT-309 consists of twofold interpenetrated 3D pillared-layer Cu₂(BDC-NH₂)₂(BPB-CF₃) nets (BPB-CF₃ = 2-trifluoromethyl-1,4-bis(4-pyridyl)benzene). Gas adsorption measurements showed that BUT-309 was a "flexible-robust" adsorbent with multistep adsorption isotherms for C₃H₄ rather than C₃H₆ at a wide temperature range. The guest-dependent pore-opening behavior endows BUT-309 with high potential in the C₃H₄/C₃H₆ separation. The C₃H₄ adsorption measurements of BUT-309 at 273-323 K showed that the lowering of the temperature induced the pore-opening action at lower pressure. Column breakthrough experiments further confirmed the capability of BUT-309 for the efficient removal of C₃H₄ from a C₃H₄/C₃H₆ binary gas, and the C₃H₆ processing capacity at 273 K (15.7 cm³ g^-1) was higher than that at 298 K (35.2 cm³ g^-1). This work shows a rare example of "flexible-robust" MOFs and demonstrated its high potential for C₃H₄/C₃H₆ separation.

Low-concentration CO2 capture using metal-organic frameworks - current status and future perspectives

The ever-increasing atmospheric CO₂ level is considered to be the major cause of climate change. Although the move away from fossil fuel-based energy generation to sustainable energy sources would significantly reduce the release of CO₂ into the atmosphere, it will most probably take time to be fully implemented on a global scale. On the other hand, capturing CO₂ from emission sources or directly from the atmosphere are robust approaches that can reduce the atmospheric CO₂ concentration in a relatively short time. Here, we provide a perspective on the recent development of metal-organic framework (MOF)-based solid sorbents that have been investigated for application in CO₂ capture from low-concentration (<10 000 ppm) CO₂ sources. We summarized the different sorbent engineering approaches adopted by researchers, both from the sorbent development and processing viewpoints. We also discuss the immediate challenges of using MOF-based CO₂ sorbents for low-concentration CO₂ capture. MOF-based materials, with tuneable pore properties and tailorable surface chemistry, and ease of handling, certainly deserve continued development into low-cost, efficient CO₂ sorbents for low-concentration CO₂ capture.

Construction and application of base-stable MOFs: a critical review

Metal-organic frameworks (MOFs) are a new class of porous crystalline materials constructed from organic ligands and metal ions/clusters. Owing to their unique advantages, they have attracted more and more attention in recent years and numerous studies have revealed their great potential in various applications. Many important applications of MOFs inevitably involve harsh alkaline operational environments. To achieve high performance and long cycling life in these applications, high stability of MOFs against bases is necessary. Therefore, the construction of base-stable MOFs has become a critical research direction in the MOF field. This review gives a historic summary of the development of base-stable MOFs in the last few years. The key factors that can determine the robustness of MOFs under basic conditions are analyzed. We also demonstrate the exciting achievements that have been made by utilizing base-stable MOFs in different applications. In the end, we discuss major challenges for the further development of base-stable MOFs. Some possible methods to address these problems are presented.

Metal-Organic Framework-Based Selective Molecular Recognition of Organic Amines and Fixation of CO2 into Cyclic Carbonates

Synthesis and structural depiction of two new metal-organic frameworks (MOFs), namely, [{Zn(L)(oba)}·4H₂O]_α (Zn-MOF-1) and [{Cd_1/2(L)_1/2(nipa)_1/2(H₂O)_1/2}·(DMF)_1/2(H₂O)]_α (Cd-MOF-2) (where L = N²,N⁶-di(pyridin-4-yl)naphthalene-2,6-dicarboxamide, 4,4'-H₂oba = 4,4'-oxybisbenzoic acid, and 5-H₂nipa = 5-nitroisophthalic acid) are reported. Both Zn-MOF-1 and Cd-MOF-2 have been prepared by reacting ligand L and coligand 4,4'-H₂oba or 5-H₂nipa with the respective dihydrates of Zn(OAc)₂ and Cd(OAc)₂ (OAc = acetate). Crystal structure X-ray analysis discloses that Zn-MOF-1 displays an overall 2D → 3D interpenetrated framework structure. The topological analysis by ToposPro suggests a (4)-connected uninodal sql topology with a point symbol of {4⁴·6²} having 2D + 2D parallel polycatenation. However, crystal packing of Cd-MOF-2 adapted a porous framework architecture and was topologically simplified as (3,4)-connected binodal 2D net. In addition, both Zn-MOF-1 and Cd-MOF-2 were proved to be multifunctional materials for the recognition of organic amines and in the fixation of CO₂ to cyclic carbonates. Remarkably, Zn-MOF-1 and Cd-MOF-2 showed very good fluorescence stability in aqueous media and have shown 98 and 97% quenching efficiencies, respectively, for 4-aminobenzoic acid (4-ABA), among all of the researched amines. The mechanistic study of organic amines recognition proposed that fluorescence quenching happened mainly through hydrogen-bonding and π-π stacking interactions. Additionally, cycloaddition of CO₂ to epoxide in the presence of Zn-MOF-1 and Cd-MOF-2 afforded up to 96% of cyclic carbonate within 24 h. Both Zn-MOF-1 and Cd-MOF-2 exhibited recyclability for up to five cycles without noticing an appreciable loss in their sensing or catalytic efficiency.

The Adsorption of Small Molecules on the Copper Paddle-Wheel: Influence of the Multi-Reference Ground State

We report a theoretical study of the adsorption of a set of small molecules (C2H2, CO, CO2, O2, H2O, CH3OH, C2H5OH) on the metal centers of the "copper paddle-wheel"-a key structural motif of many MOFs. A systematic comparison between DFT of different rungs, single-reference post-HF methods (MP2, SOS-MP2, MP3, DLPNO-CCSD(T)), and multi-reference approaches (CASSCF, DCD-CAS(2), NEVPT2) is performed in order to find a methodology that correctly describes the complicated electronic structure of paddle-wheel structure together with a reasonable description of non-covalent interactions. Apart from comparison with literature data (experimental values wherever possible), benchmark calculations with DLPNO-MR-CCSD were also performed. Despite tested methods show qualitative agreement in the majority of cases, we showed and discussed reasons for quantitative differences as well as more fundamental problems of specific cases.

Stable isomeric layered indium coordination polymers for high proton conduction

Stable isomeric layered indium coordination polymers with different coordinated anionic sites for high proton conduction.

Multi-functional metal-organic frameworks for detection and removal of water pollutions

Water pollutions have caused serious threats to the aquatic environment and human health, it is of great significance to monitor and control their contents in water. Compared with the traditional...

Highly connected framework materials from flexible tetra-isophthalate ligands

High connectivity octacarboxylate ligands containing non-coordinating diamine cores lead to a wide variety of new MOFs, many containing cage-like pores.

A Copper-Based Metal-Organic Framework for C2H2/CO2 Separation

A copper-based metal-organic framework, [Cu₂(PBTDA)(H₂O)₂] (UTSA-98, UTSA = the University of Texas at San Antonio; H₄PBTDA = 5',5''''-(1,4-phenylene)bis([1,1':3',1″-terphenyl]-4,4″-dicarboxylic acid)), has been solvothermally synthesized. The alternative connection of classical dicopper secondary building units and deprotonated four-branched PBTDA^4- ligands led to the formation of the three-dimensional framework of UTSA-98 with one-dimensional rhombic channels. Its guest-free phase, UTSA-98a, uptakes much more C₂H₂ (82.6 cm³/g) than CO₂ (40.3 cm³/g) at 298 K and 100 kPa, resulting in a high adsorption selectivity of 5.2. Furthermore, the efficient separation ability of UTSA-98a toward the C₂H₂/CO₂ gas mixture was further verified by laboratory-scale fixed-bed breakthrough experiments.

Synthesis of a 2D copper(II)-carboxylate framework having ultrafast adsorption of organic dyes

Two-dimensional (2D) coordination polymers are very interesting materials for their attractive applications. A novel 2D metal-organic framework (MOF) was derived from copper(II) and amino benzoic acid under both room temperature and solvothermal reaction conditions using different solvents. From both of the synthesis methods, an identical MOF was crystalized with monoclinic crystal system having P2₁/c space group. Hirshfeld surface analysis is carried out to explore the non-covalent interactions obtained from single crystal XRD investigation in terms of percentage contribution of each interatomic contact involved in packing of molecules into MOF structure. The microstructure analysis and surface morphology studies revealed the 2D layered regular pattern of rhombus disks of ~5 μm thickness throng together via clustering of these rhombic shaped flakes as flowers (ranging 50-100 μm in size) having uniform elemental composition. This 2D MOF efficiently adsorbed organic dyes (methylene blue, methyl orange, and methyl red) from their aqueous solutions. The 2D copper-carboxylate framework (1.2 g/L) exhibited high adsorption rates for organic dyes (0.15-0.19 mM), and >90% of these dyes could be captured as soon as they are exposed to MOF suspension (1 min) in each case. The dye removal efficiency is credited to synergy among structure, ionic strength, shapes and dimensions of dyes with respect to MOF structure. The microstructure of MOF along with electronic interactions like electrostatic, hydrogen bonding, π-π interactions and coordination to open metal sites, might contribute to the ultrafast dye adsorption process by MOF. The adsorption phenomenon is spontaneous and followed the pseudo-second order kinetic mechanism. DFT calculations revealed important electronic parameters of the dyes and model MOF systems, and novel insights with respect to possible dye-MOF interactions. The MOF remained quite stable during the dye adsorption and was regenerated easily for the successful subsequent use.

Chemically Stable Metal-Organic Frameworks: Rational Construction and Application Expansion

Metal-organic frameworks (MOFs) have been attracting tremendous attention owing to their great structural diversity and functional tunability. Despite numerous inherent merits and big progress in the fundamental research (synthesizing new compounds, discovering new structures, testing associated properties, etc.), poor chemical stability of most MOFs severely hinders their involvement in practical applications, which is the final goal for developing new materials. Therefore, constructing new stable MOFs or stabilizing extant labile MOFs is quite important. As with them, some "potential" applications would come true and a lot of new applications under harsh conditions can be explored. Efficient strategies are being pursued to solve the stability problem of MOFs and thereby achieve and expand their applications.In this Account, we summarize the research advance in the design and synthesis of chemically stable MOFs, particularly those stable in acidic, basic, and aqueous systems, as well as in the exploration of their applications in several expanding fields of environment, energy, and food safety, which have been dedicated in our lab over the past decade. The strategies for accessing stable MOFs can be classified into: (a) assembling high-valent metals (hard acid, such as Zr⁴⁺, Al³⁺) with carboxylate ligands (hard base) for acid-stable MOFs; (b) combining low-valent metals (soft acid, such as Co²⁺, Ni²⁺) and azolate ligands (soft base, such as pyrazolate) for alkali-resistant MOFs; (c) enhancing the connectivity of the building unit; (d) contracting or rigidifying the ligand; (e) increasing the hydrophobicity of the framework; and (f) substituting liable building units with stable ones (such as metal metathesis) to obtain robust MOFs. In addition, other factors, including the geometry and symmetry of building units, framework-framework interaction, and so forth, have also been taken into account in the design and synthesis of stable MOFs. On the basis of these approaches, the stability of resulting MOFs under corresponding conditions has been remarkably enhanced.With high chemical stability achieved, the MOFs have found many new and significant applications, aiming at addressing global challenges related to environmental pollution, energy shortage, and food safety.A series of stable MOFs have been constructed for detecting and eliminating contaminations. Various fluorescent MOFs were rationally customized to be powerful platforms for sensing hazardous targets in food and water, such as dioxins, antibiotics, veterinary drugs, and heavy metal ions. Some hydrophobic MOFs even showed effective and specific capture of low-concentration volatile organic compounds.Novel MOFs with record-breaking acid/base/nucleophilic regent resistance have expanded their application scope under harsh conditions. BUT-8(Cr)A, as the most acid-stable MOF yet, showed reserved structural integrity in concentrated H₂SO₄ and recorded high proton conductivity; the most alkali-resistant MOF, PCN-601, retained crystallinity even in boiling saturated NaOH aqueous solution, and such base-stable MOFs composed of non-noble metal clusters and poly pyrazolate ligands also demonstrated great potential in heterogeneous catalysis in alkaline/nucleophilic systems for the first time.It is believed that this Account will provide valuable references on stable MOFs' construction as well as application expansion toward harsh conditions, thereby being helpful to promote MOF materials to step from fundamental research to practical applications.

In Situ Porphyrin Substitution in a Zr(IV)-MOF for Stability Enhancement and Photocatalytic CO2 Reduction

Despite numerous inherent merits of metal-organic frameworks (MOFs), structural fragility has imposed great restrictions on their wider involvement in many applications, such as in catalysis. Herein, a strategy for enhancing stability and enabling functionality in a labile Zr(IV)-MOF has been proposed by in situ porphyrin substitution. A size- and geometry-matched robust linear porphyrin ligand 4,4'-(porphyrin-5,15-diyl)dibenzolate (DCPP^2- ) is selected to replace the 4,4'-(1,3,6,8-tetraoxobenzo[lmn][3,8]phenanthroline-2,7(1H,3H,6H,8H)-diyl)dibenzoate (NDIDB^2- ) ligand in the synthesis of BUT-109(Zr), affording BUT-110 with varied porphyrin contents. Compared to BUT-109(Zr), the chemical stability of BUT-110 series is greatly improved. Metalloporphyrin incorporation endows BUT-110 MOFs with high catalytic activity in the photoreduction of CO₂ , in the absence of photosensitizers. By tuning the metal species and porphyrin contents in BUT-110, the resulting BUT-110-50%-Co is demonstrated to be a good photocatalyst for selective CO₂ -to-CO reduction, via balancing the chemical stability, photocatalytic efficiency, and synthetic cost. This work highlights the advantages of in situ ligand substitution for MOF modification, by which uniform distribution and high content of the incoming ligand are accessible in the resulting MOFs. More importantly, it provides a promising approach to convert unstable MOFs, which mainly constitute the vast MOF database but have always been neglected, into robust functional materials.

Theoretical hydrogen bonding calculations and proton conduction for Eu(iii)-based metal-organic framework

A water-mediated proton-conducting Eu(iii)-MOF has been synthesized, which provides a stable proton transport channel that was confirmed by theoretical calculation. The investigation of proton conduction shows that the conductivity of Eu(iii)-MOF obtained at 353 K and 98% RH is 3.5 × 10-3 S cm-1, comparable to most of the Ln(iii)-MOF based proton conductors.

Multiple Functions of Gas Separation and Vapor Adsorption in a New MOF with Open Tubular Channels

Separation or purification is one of the difficult problems in the petrochemical industry. To help solve the difficulty of separation or purification for C₂H₂/CO₂ and C₂H_n/CH₄ in the chemical industry, we synthesized a new metal-organic framework (MOF), [Ni(dpip)]·2.5DMF·H₂O (1), by a bipyridyl-substituted isophthalic acid ligand. The MOF includes two types of one-dimensional (1D) tubular channels with different sizes and porous environments. The unique tubular channels lead to not only remarkable gas sorption capacity of C₂H₄, C₂H₂, and CO₂, but also good selectivity for C₂H₂/CH₄, C₂H₂/CH₄, CO₂/CH₄, and C₂H₂/CO₂, as demonstrated by single-component sorption isotherm results, ideal adsorbed solution theory calculations, and dynamic breakthrough curves. Grand canonical Monte Carlo (GCMC) simulation reveals preferential adsorption sites in the MOF for CO₂, C₂H₂, and C₂H₄. The MOF also exhibits an obvious size-selective absorption effect on vapor molecules.

Varying the Dimensionality of Cu(II)-Based Coordination Polymers Through Solvent Influence

This work reports the synthesis and structure of a large porous zeotype network observed within compound (1) using {Cu2(piv)4} as the linking unit (piv = pivalate). The slow in situ formation of the hmt ligand (hexamethylenetetramine) appears to be key in generating a µ4-bridging mode of the hmt-node. Attempts to improve the low yield of compound (1) using different solvent layer diffusion methods resulted in the µ3-hmt complexes (2) and (3). Both compounds exhibit a 3D network of two intertwined chiral networks. Strong hydrogen bonding present in (3) leads to the formation of intertwined, DNA-like double-helix structures. The use of bulky solvents in the synthesis of compound (4) leads to the structure crystallizing solvent-free. The packing of (4) is dominated by energy minimization, which is achieved when the 1D-“cylinders” pack into the closest possible arrangement. This work highlights the potential for solvent controlled synthesis of extended copper-hmt systems.

Formation of a robust, double-walled LiMOF from an L-shaped di-substituted N-heterocyclic adamantane-based ligand

The properties of adamantane render it an attractive building block towards the synthesis of robust frameworks. This work describes the synthesis of the L-shaped 1,3-bis(3'-carboxypyridine)adamantane (L1) ligand and the corresponding Li(i), Zn(ii) and Cu(ii) frameworks. Three topologically analogous Li(i) frameworks LiMOF12, LiMOF30 and LiMOF50 are reported, with calculated solvent accessible void volumes of 46, 43 and 36%, respectively. The reaction between the carboxylate groups of L1 and the Li(i) cations resulted in the formation of Li-carboxylate rods. The Li-carboxylate rods contributed to the formation of a double-walled MOF with large, open one dimensional channels. The synergistic effect of the double wall, lithium-carboxylate rods and the adamantane core itself, resulted in the formation of a robust network stable up to temperatures of 300-350 °C and a minimum of three months stability in air. Furthermore, complexation of L1 with Cu(BF4)2·H2O and Zn(CF3SO3)2 provided a 2D → 3D interpenetrated network containing a classic dimeric copper paddle-wheel SBU, and an infinite 1D chain which extended into a 3D structure facilitated by hydrogen-bonding interactions, respectively.

Water and Metal-Organic Frameworks: From Interaction toward Utilization

The steep stepwise uptake of water vapor and easy release at low relative pressures and moderate temperatures together with high working capacities make metal-organic frameworks (MOFs) attractive, promising materials for energy efficient applications in adsorption devices for humidity control (evaporation and condensation processes) and heat reallocation (heating and cooling) by utilizing water as benign sorptive and low-grade renewable or waste heat. Emerging MOF-based process applications covered are desiccation, heat pumps/chillers, water harvesting, air conditioning, and desalination. Governing parameters of the intrinsic sorption properties and stability under humid conditions and cyclic operation are identified. Transport of mass and heat in MOF structures, at least as important, is still an underexposed topic. Essential engineering elements of operation and implementation are presented. An update on stability of MOFs in water vapor and liquid systems is provided, and a suite of 18 MOFs are identified for selective use in heat pumps and chillers, while several can be used for air conditioning, water harvesting, and desalination. Most applications with MOFs are still in an exploratory state. An outlook is given for further R&D to realize these applications, providing essential kinetic parameters, performing smart engineering in the design of systems, and conceptual process designs to benchmark them against existing technologies. A concerted effort bridging chemistry, materials science, and engineering is required.

Ultrasonic Assisted Synthesis of Size-Controlled Cu-Metal-Organic Framework Decorated Graphene Oxide Composite: Sustainable Electrocatalyst for the Trace-Level Determination of Nitrite in Environmental Water Samples

Excess levels of nitrite ion in drinking water interact with amine functionalized compounds to form carcinogenic nitrosamines, which cause stomach cancer. Thus, it is indispensable to develop a simple protocol to detect nitrite. In this paper, a Cu-metal-organic framework (Cu-MOF) with graphene oxide (GO) composite was synthesized by ultrasonication followed by solvothermal method and then fabricated on a glassy carbon (GC) electrode for the sensitive and selective determination of nitrite contamination. The SEM image of the synthesized Cu-MOF showed colloidosome-like structure with an average size of 8 μm. Interestingly, the Cu-MOF-GO composite synthesized by ultrasonic irradiation followed by solvothermal process produce controlled size of 3 μm colloidosome-like structure. This was attributed to the formation of an exfoliated sheet-like structure of GO by ultrasonication in addition to the obvious influence of GO providing the oxygen functional groups as a nucleation node for size-controlled growth. On the other hand, the composite prepared without ultrasonication exhibited 6.6 μm size agglomerated colloidosome-like structures, indicating the crucial role of ultrasonication for the formation of size-controlled composites. XPS results confirmed the presence of Cu(II) in the as-synthesized Cu-MOF-GO based on the binding energies at 935.5 eV for Cu 2p_3/2 and 955.4 eV for Cu 2p_1/2. The electrochemical impedance studies in [Fe(CN)₆]^3-/4- redox couple at the composite fabricated electrode exhibited more facile electron transfer than that with Cu-MOF and GO modified electrodes, which helped to utilize Cu-MOF-GO for trace level determination of nitrite in environmental effluent samples. The Cu-MOF-GO fabricated electrode offered a superior sensitive platform for nitrite determination than the Cu-MOF and GO modified electrodes demonstrating oxidation at less positive potential with enhanced oxidation current. The present sensor detects nitrite in the concentration range of 1 × 10^-8 to 1 × 10^-4 M with the lowest limit of detection (LOD) of 1.47 nM (S/N = 3). Finally, the present Cu-MOF-GO electrode was successfully exploited for nitrite ion determination in lake and dye contaminated water samples.