Novel Au Catalysis Strategy for the Synthesis of Au@Pt Core-Shell Nanoelectrocatalyst with Self-Controlled Quasi-Monolayer Pt Skin

AuPt/NF prepared with the lattice induction of substrate was applied to construct the electrochemical immunosensor for PCT detection

For the electrodeposition, the conductivity and lattice structure of substrate is important to the morphology and lattice of the deposited material. In this study, gold-platinum (AuPt) nanopartical was deposited on nickel foam (NF) based on the lattice induced orientation of the Ni substrate, and the obtained AuPt/NF was applied to construct electrochemical impedimetric immunosensor for procalcitonin (PCT) detection. As a new immunosensor matrix, NF with higher electrical conductance, flexibility and specific surface area, which can improve the plasticity, sensitivity and universality of the immunoelectrode. Due to the lattice matching between Au and Ni, ultrathin AuPt nanolayer with good biocompatibility and large surface area can be modified on the NF surface, which can bind more biomolecules and amplifies the change of impedance signal. Based on the synergistic effect between AuPt and NF, PCT detection based on this electrochemical impedimetric immunosensor with a wide linear range (0.2 pg mL-1 to 20 ng mL-1) and low detection limit (0.11 pg mL-1). In addition, this impedimetric immunosensor exhibits high recovery in the PCT detection of serum samples. This work provides a new thought and method for the construction of electrochemical immunosensor.

Engineering composition-varied Au/PtTe hetero-junction-abundant nanotrough arrays as robust electrocatalysts for ethanol electrooxidation

Pt-based multi-metallic electrocatalysts containing hetero-junctions are found to have superior catalytic performance to composition-equivalent counterparts. However, in bulk solution, controllable preparation of Pt-based hetero-junction electrocatalyst is an extremely random work owing to the complexity of solution reactions. Herein, we develop an interface-confined transformation strategy, subtly achieving Au/PtTe hetero-junction-abundant nanostructures by employing interfacial Te nanowires as sacrificing templates. By controlling the reaction conditions, composition-varied Au/PtTe can be easily obtained, such as Au₇₅/Pt₂₀Te₅, Au₅₅/Pt₃₄Te₁₁, and Au₅/Pt₆₉Te₂₆. Moreover, each Au/PtTe hetero-junction nanostructure appears to be an array consisting of side-by-side Au/PtTe nanotrough units and can be directly used as a catalyst layer without further post-treatment. All Au/PtTe hetero-junction nanostructures show better catalytic activity towards ethanol electrooxidation than commercial Pt/C because of the combining contributions of Au/Pt hetero-junctions and the collective effects of multi-metallic elements, where Au₇₅/Pt₂₀Te₅ exhibits the best electrocatalytic performance among three Au/PtTe nanostructures owing to its optimal composition. This study may provide technically feasible guidance for further maximizing the catalytic activity of Pt-based hybrid catalysts.

Element Specific Atom Counting at the Atomic Scale by Combining High Angle Annular Dark Field Scanning Transmission Electron Microscopy and Energy Dispersive X-ray Spectroscopy

A new methodology is presented to count the number of atoms in multimetallic nanocrystals by combining energy dispersive X-ray spectroscopy (EDX) and high angle annular dark field scanning transmission electron microscopy (HAADF STEM). For this purpose, the existence of a linear relationship between the incoherent HAADF STEM and EDX images is exploited. Next to the number of atoms for each element in the atomic columns, the method also allows quantification of the error in the obtained number of atoms, which is of importance given the noisy nature of the acquired EDX signals. Using experimental images of an Au@Ag core-shell nanorod, it is demonstrated that 3D structural information can be extracted at the atomic scale. Furthermore, simulated data of an Au@Pt core-shell nanorod show the prospect to characterize heterogeneous nanostructures with adjacent atomic numbers.

Advanced Strategies for Stabilizing Single-Atom Catalysts for Energy Storage and Conversion

Well-defined atomically dispersed metal catalysts (or single-atom catalysts) have been widely studied to fundamentally understand their catalytic mechanisms, improve the catalytic efficiency, increase the abundance of active components, enhance the catalyst utilization, and develop cost-effective catalysts to effectively reduce the usage of noble metals. Such single-atom catalysts have relatively higher selectivity and catalytic activity with maximum atom utilization due to their unique characteristics of high metal dispersion and a low-coordination environment. However, freestanding single atoms are thermodynamically unstable, such that during synthesis and catalytic reactions, they inevitably tend to agglomerate to reduce the system energy associated with their large surface areas. Therefore, developing innovative strategies to stabilize single-atom catalysts, including mass-separated soft landing, one-pot pyrolysis, co-precipitation, impregnation, atomic layer deposition, and organometallic complexation, is critically needed. Many types of supporting materials, including polymers, have been commonly used to stabilize single atoms in these fabrication techniques. Herein, we review the stabilization strategies of single-atom catalyst, including different synthesis methods, specific metals and carriers, specific catalytic reactions, and their advantages and disadvantages. In particular, this review focuses on the application of polymers in the synthesis and stabilization of single-atom catalysts, including their functions as carriers for metal single atoms, synthetic templates, encapsulation agents, and protection agents during the fabrication process. The technical challenges that are currently faced by single-atom catalysts are summarized, and perspectives related to future research directions including catalytic mechanisms, enhancement of the catalyst loading content, and large-scale implementation are proposed to realize their practical applications.

Graphical Abstract

Single-atom catalysts are characterized by high metal dispersibility, weak coordination environments, high catalytic activity and selectivity, and the highest atom utilization. However, due to the free energy of the large surface area, individual atoms are usually unstable and are prone to agglomeration during synthesis and catalytic reactions. Therefore, researchers have developed innovative strategies, such as soft sedimentation, one-pot pyrolysis, coprecipitation, impregnation, step reduction, atomic layer precipitation, and organometallic complexation, to stabilize single-atom catalysts in practical applications. This article summarizes the stabilization strategies for single-atom catalysts from the aspects of their synthesis methods, metal and support types, catalytic reaction types, and its advantages and disadvantages. The focus is on the application of polymers in the preparation and stabilization of single-atom catalysts, including metal single-atom carriers, synthetic templates, encapsulation agents, and the role of polymers as protection agents in the manufacturing process. The main feature of polymers and polymer-derived materials is that they usually contain abundant heteroatoms, such as N, that possess lone-pair electrons. These lone-pair electrons can anchor the single metal atom through strong coordination interactions. The coordination environment of the lone-pair electrons can facilitate the formation of single-atom catalysts because they can enlarge the average distance of a single precursor adsorbed on the polymer matrix. Polymers with nitrogen groups are favorable candidates for dispersing active single atoms by weakening the tendency of metal aggregation and redistributing the charge densities around single atoms to enhance the catalytic performance. This review provides a summary and analysis of the current technical challenges faced by single-atom catalysts and future research directions, such as the catalytic mechanism of single-atom catalysts, sufficiently high loading, and large-scale implementation.

Symmetric and asymmetric overgrowth of a Ag shell onto gold nanorods assisted by Pt pre-deposition

The plasmonic properties of noble metallic nanoparticles could be tuned by morphology and composition, enabling opportunities for applications in sensors, photocatalysis, biomedicine, and energy conversion. Here, we report a method of the symmetric and asymmetric overgrowth of a Ag shell onto gold nanorods assisted by Pt pre-deposition via a 2-step approach. Firstly, gold nanorods (AuNRs), synthesized via a seed-mediated method, were used as seeds to form a AuNR–Pt structure, by using K₂PtCl₄ as the precursor. In this step, most of the Pt material was selectively deposited on the tips of the AuNR. Secondly, by using AgNO₃ as the precursor, a Ag shell was overgrown on the surface of the AuNRs–Pt nanoparticles, resulting in a (AuNR–Pt)–Ag core–shell tri-metallic nanostructure. Due to the surface energy and lattice matching between Au and Ag, the Ag shell preferred to be epitaxially overgrown on the side of AuNR. The Ag shell thickness and symmetry of the (AuNR–Pt)–Ag could be tuned by changing the amounts of AgNO₃ precursor. With the increase of the Ag shell thickness, the (AuNR–Pt)–Ag nanostructures changed from symmetric to asymmetric. The obtained (AuNR–Pt)–Ag nanostructures were studied using UV-vis-NIR spectroscopy, transmission electron microscopy, EDS mapping, DLS, and ICP-MS. The growth mechanism was discussed.

Demonstrating asymmetric (AuNR–Pt)–Ag tri-metallic nanostructures by a two-step seed-mediated method. The shell thickness was controlled by the amount of AgNO₃.

Synthesis of sea urchin-shaped Au nanocrystals by double-strand diblock oligonucleotides for surface-enhanced Raman scattering and catalytic application

It is of great significance to construct specially designed gold nanocrystals (AuNCs) with precisely controllable size and morphology to achieve an excellent physicochemical performance. In this work, sea urchin-shaped AuNCs with tunable plasmonic property were successfully synthesized by the hybridized double-strand poly adenine (dsPolyA) DNA-directed self-assembly technique. Hybridized dsPolyA as the directing template had suitable rigidity and upright conformation, which benefited the controllable formation of these anisotropic multi-branched AuNCs with the assistance of surfactant. The effects of essential conditions influencing the synthesis and precise morphology control were investigated in detail. COMSOL simulation was used to evaluate their electromagnetic field distribution according to their morphologies, and the result suggested that sea urchin-shaped AuNCs had abundant 'hot spots' for surface-enhanced Raman scattering (SERS) detection due to their regular nanoprotuberance structure. Finally, sea urchin-shaped AuNCs with excellent SERS and catalytic performance were applied for the quantitative analysis of food colorant and catalytic degradation of potential pollutants. The SERS enhancement factor of sea urchin-shaped AuNCs was up to 5.27 × 10⁶, and the catalytic degradation rate for 4-NP by these AuNCs was up to -0.13min^-1.

Atomic Crystal Facet Engineering of Core-Shell Nanotetrahedrons Restricted under Sub-10 Nanometer Region

Simultaneously engineering the size and surface crystal facets of bimetallic core-shell nanocrystals offers an effective route to not only reduce the extravagance of innermost core metal and maximize the utilization efficiency of shell atoms but also strengthen the core-to-shell interaction via ligand and/or strain effects. Herein, we systematically study the architecture transition and crystal facet engineering at the atomic level on the surface of sub-5 nm Pd(111) tetrahedrons (Ths), aimed at embodying how the variations in the local facet and shape of a sub-10 nm core-shell structure affect its surface geometrical properties and electronic structures. Specifically, surface atomic replication is predominant when the shell metal deposits less than five atomic layers, thus forming a series of Pd@M (M = Pt, Ru, and Rh) core-shell Ths enclosed by (111) facets (∼6.8 nm), while over five atomic layers, spontaneous facets tropism of each metal is predominant, where Pt atoms still follow fcc-(111) packing, Ru atoms select hcp-phase stacking, and Rh atoms choose fcc-(100) crystallization, respectively. In particular, Pt atoms take a seamless geometrical transformation from Pd@Pt Ths into Pd@Pt truncated octahedrons (TOhs, ∼7.6 nm). As a proof-of-concept application, such sub-10 nm core-shell architectures with Pt skin show a component-dependent relationship toward oxygen reduction reaction (ORR), where the catalytic activity follows the order of Pd@Pt(111) TOhs (E_1/2 = 0.916 V, 1.632 A mg_Pt^-1) > Pd@Pt(111) Ths > Pt black. Meanwhile the Ru skin show a facet-dependent relationship toward acidic hydrogen evolution reaction (HER) where the catalytic activity follows the order of Pd@Ru(111) Ths > Pd@Ru(hcp) Ths > Pd Ths.