Anisotropic Dye Adsorption and Anhydrous Proton Conductivity in Smectic Liquid Crystal Networks: The Role of Cross-Link Density, Order, and Orientation

Self-Assembled and Polymerized Hierarchical Nanostructure Films of Cyanostilbene-Based Reactive AIEgens for Smart Chemosensors

For the development of acid-responsive advanced fluorescent films with a 2D nanostructure, a pyridyl cyanostilbene-based AIEgen (PCRM) is newly synthesized. The synthesized PCRM exhibits aggregation-induced emission (AIE) and responds reversibly to acid and base stimuli. To fabricate the nanoporous polymer-stabilized film, PCRM and 4-(octyloxy)benzoic acid (8OB) are complexed in a 1:1 ratio through hydrogen bonding. The PCRM-8OB complex with a smectic mesophase is uniaxially oriented at first and photopolymerized with a crosslinker. By subsequently removing 8OB in an alkaline solution, nanopores are generated in the self-assembled and polymerized hierarchical 2D nanostructure film. The prepared nanoporous fluorescent films exhibit not only the reversible response to acid and base stimuli but also mechanical and chemical robustness. Since the nanoporous fluorescent films have different sensitivities to trifluoroacetic acid (TFA) depending on the molecular orientation in the film, advanced acid vapor sensors that can display the risk level according to the concentration of TFA are demonstrated. Reactive AIEgens-based hierarchical nanostructure films with nanopores fabricated by a subsequent process of self-assembly, polymerization, and etching can open a new door for the development of advanced chemosensors.

Aquatic Functional Liquid Crystals: Design, Functionalization, and Molecular Simulation

Aquatic functional liquid crystals, which are ordered molecular assemblies that work in water environment, are described in this review. Aquatic functional liquid crystals are liquid-crystalline (LC) materials interacting water molecules or aquatic environment. They include aquatic lyotropic liquid crystals and LC based materials that have aquatic interfaces, for example, nanoporous water treatment membranes that are solids preserving LC order. They can remove ions and viruses with nano- and subnano-porous structures. Columnar, smectic, bicontinuous LC structures are used for fabrication of these 1D, 2D, 3D materials. Design and functionalization of aquatic LC sensors based on aqueous/LC interfaces are also described. The ordering transitions of liquid crystals induced by molecular recognition at the aqueous interfaces provide distinct optical responses. Molecular orientation and dynamic behavior of these aquatic functional LC materials are studied by molecular dynamics simulations. The molecular interactions of LC materials and water are key of these investigations. New insights into aquatic functional LC materials contribute to the fields of environment, healthcare, and biotechnology.

Tuning the Gas Separation Performances of Smectic Liquid Crystalline Polymer Membranes by Molecular Engineering

The effect of layer spacing and halogenation on the gas separation performances of free-standing smectic LC polymer membranes is being investigated by molecular engineering. LC membranes with various layer spacings and halogenated LCs were fabricated while having a planar aligned smectic morphology. Single permeation and sorption data show a correlation between gas diffusion and layer spacing, which results in increasing gas permeabilities with increasing layer spacing while the ideal gas selectivity of He over CO₂ or He over N₂ decreases. The calculated diffusion coefficients show a 6-fold increase when going from membranes with a layer spacing of 31.9 Å to membranes with a layer spacing of 45.2 Å, demonstrating that the layer spacing in smectic LC membranes mainly affects the diffusion of gasses rather than their solubility. A comparison of gas sorption and permeation performances of smectic LC membranes with and without halogenated LCs shows only a limited effect of LC halogenation by a slight increase in both solubility and diffusion coefficients for the membranes with halogenated LCs, resulting in a slightly higher gas permeation and increased ideal gas selectivities towards CO₂. These results show that layer spacing plays an important role in the gas separation performances of smectic LC polymer membranes.

Advanced Functional Liquid Crystals

Liquid crystals have been intensively studied as functional materials. Recently, integration of various disciplines has led to new directions in the design of functional liquid-crystalline materials in the fields of energy, water, photonics, actuation, sensing, and biotechnology. Here, recent advances in functional liquid crystals based on polymers, supramolecular complexes, gels, colloids, and inorganic-based hybrids are reviewed, from design strategies to functionalization of these materials and interfaces. New insights into liquid crystals provided by significant progress in advanced measurements and computational simulations, which enhance new design and functionalization of liquid-crystalline materials, are also discussed.

Hydrogen-Bonded Supramolecular Liquid Crystal Polymers: Smart Materials with Stimuli-Responsive, Self-Healing, and Recyclable Properties

Hydrogen-bonded liquid crystalline polymers have emerged as promising "smart" supramolecular functional materials with stimuli-responsive, self-healing, and recyclable properties. The hydrogen bonds can either be used as chemically responsive (i.e., pH-responsive) or as dynamic structural (i.e., temperature-responsive) moieties. Responsiveness can be manifested as changes in shape, color, or porosity and as selective binding. The liquid crystalline self-organization gives the materials their unique responsive nanostructures. Typically, the materials used for actuators or optical materials are constructed using linear calamitic (rod-shaped) hydrogen-bonded complexes, while nanoporous materials are constructed from either calamitic or discotic (disk-shaped) complexes. The dynamic structural character of the hydrogen bond moieties can be used to construct self-healing and recyclable supramolecular materials. In this review, recent findings are summarized, and potential future applications are discussed.

Anisotropic Dyes Adsorption by Templated Smectic Nanoporous Polymer Films: Pore Size vs Pore Charges Affecting the Adsorption

Selective 2-dimentional (2D) nanoporous polymer films have been developed by a templating method based on hydrogen-bonding supramolecular liquid crystals (LCs) containing benzoic acid and pyridine groups (6OBA·NC6·C6H). The smectic lamellar...

On the Order and Orientation in Liquid Crystalline Polymer Membranes for Gas Separation

To prevent greenhouse emissions into the atmosphere, separations like CO2/CH4 and CO2/N2 from natural gas, biogas, and flue gasses are crucial. Polymer membranes gained a key role in gas separations over the past decades, but these polymers are often not organized at a molecular level, which results in a trade-off between permeability and selectivity. In this work, the effect of molecular order and orientation in liquid crystals (LCs) polymer membranes for gas permeation is demonstrated. Using the self-assembly of polymerizable LCs to prepare membranes ensures control over the supramolecular organization and alignment of the building blocks at a molecular level. Robust freestanding LC membranes were fabricated that have various, distinct morphologies (isotropic, nematic cybotactic, and smectic C) and alignment (planar and homeotropic), while using the same chemical composition. Single gas permeation data show that the permeability decreases with increasing molecular order while the ideal gas selectivity of He and CO2 over N2 increases tremendously (36-fold for He/N2 and 21-fold for CO2/N2) when going from randomly ordered to the highly ordered smectic C morphology. The calculated diffusion coefficients showed a 10-fold decrease when going from randomly ordered membranes to ordered smectic C membranes. It is proposed that with increasing molecular order, the free volume elements in the membrane become smaller, which hinders gasses with larger kinetic diameters (Ar, N2) more than gasses with smaller kinetic diameters (He, CO2), inducing selectivity. Comparison of gas sorption and permeation performances of planar and homeotropic aligned smectic C membranes shows the effect of molecular orientation by a 3-fold decrease of the diffusion coefficient of homeotropic aligned smectic C membranes resulting in a diminished gas permeation and increased ideal gas selectivities. These results strongly highlight the importance of molecular order and orientation in LC polymer membranes for gas separation.

Liquid-Crystalline Polymer Particles Prepared by Classical Polymerization Techniques

Liquid-crystalline polymer particles prepared by classical polymerization techniques are receiving increased attention as promising candidates for use in a variety of applications including micro-actuators, structurally colored objects, and absorbents. These particles have anisotropic molecular order and liquid-crystalline phases that distinguish them from conventional polymer particles. In this minireview, the preparation of liquid-crystalline polymer particles from classical suspension, (mini-)emulsion, dispersion, and precipitation polymerization reactions are discussed. The particle sizes, molecular orientations, and liquid-crystalline phases produced by each technique are summarized and compared. We conclude with a discussion of the challenges and prospects of the preparation of liquid-crystalline polymer particles by classical polymerization techniques.

Gemini Thermotropic Smectic Liquid Crystals for Two-Dimensional Nanostructured Water-Treatment Membranes

We have developed a two-dimensional (2D) liquid-crystalline (LC) nanostructured water-treatment membrane showing high virus rejection ability (over 99.99997% for bacteriophage Qβ) and improved water permeation. Polymerizable gemini amphiphiles have been designed and synthesized. They have H-shaped gemini-type structures of thermotropic smectic liquid crystals composed of cationic imidazolium moieties. One of the gemini amphiphiles shows a smectic A phase with an interdigitated bilayer structure. A cross-linked self-standing 2D nanostructured polymer film has been obtained by in situ photopolymerization of the gemini amphiphile in the smectic phase. The length of linkers in gemini amphiphiles affects the formation of LC phases. The 2D nanostructured membrane also showed selective salt rejection.

Smectic Liquid Crystalline Polymer Membranes with Aligned Nanopores in an Anisotropic Scaffold

Bottom-up methods for the fabrication of nanoporous polymer membranes have numerous advantages. However, it remains challenging to fabricate nanoporous membranes that are mechanically robust and have aligned pores, that is, with a low tortuosity. Here, a mechanically robust thin-film composite membrane was fabricated consisting of a two-dimensional (2D) porous smectic liquid crystalline polymer network inside an anisotropic, microporous polymer scaffold. The polymer scaffold allows for relatively straightforward planar alignment of the smectic liquid crystalline mixture, which consisted of a diacrylate cross-linker and a dimer forming benzoic acid-based monoacrylate. Polymerized samples displayed a smectic A (SmA) phase, which formed the eventual 2D porous channels after base treatment. The aligned 2D nanoporous membranes showed a high rejection of anionic solutes bigger than 322 g/mol. Cleaning and reusability of the system were demonstrated by intentionally fouling the porous channels with a cationic dye and subsequently cleaning the membrane with an acidic solution. After cleaning, the membrane properties were unaffected; this, combined with numerous pressurizing cycles, demonstrated reusability of the system.

Interconnection of smectic domains by polyethylene oxide networks for long-range conducting channels towards efficient and thermally stable dye-sensitized solar cells

The development of an efficient electrolyte that combines fast charge transport and high stability for advanced energy devices remains a huge challenge because these two qualities are traded off during the normal design process. Nanostructured liquid crystals have shown potential as efficient charge transport media. However, the reported liquid crystal electrolytes showed limited performance in energy devices probably due to the charge transport barrier at the domain interfaces. Herein, a novel approach was proposed to construct self-assembled long-range charge transport channels in liquid crystal electrolytes by interconnecting the liquid crystal domains via flexible polymer networks. A liquid crystal gel electrolyte was prepared by solidifying a smectic electrolyte using polyethylene oxide (PEO) networks, and applied to improve the performance of the dye-sensitized solar cells (DSSCs). In the gel electrolyte, the smectic assembly formed lamellar nanostructures for charge transport at the intra-domains, while the PEO networks aggregated amorphously at the domain interfaces, acting as bridges to interconnect the smectic domains for charge transport over the inter-domains. Based on the coordination of the smectic assembly and PEO aggregation, the charge transport in the liquid crystal gel electrolyte was greatly improved despite a higher viscosity. Conversely, the photovoltaic efficiency of the DSSC prepared from the liquid crystal gel electrolyte was about two times enhanced, with a champion efficiency of 7.2%, compared with that from the smectic electrolyte without PEO. The liquid crystal gel-based DSSC showed superior stable performance within a wide temperature range from 30 to 70 °C, and stored after 5000 h. Our work here provides a novel and convenient approach to break the trade-off for high-performance electrolytes towards efficient and stable energy devices.

Functional Ionic Liquid Crystals

Ionic liquid crystals have emerged as a new class of functional soft materials in the last two decades, and they exhibit synergistic characteristics of ionic liquids and liquid crystals such as macroscopic orientability, miscibility with various species, phase stability, nanostructural tunability, and polar nanochannel formation. Owing to these characteristics, the structures, properties, and functions of ionic liquid crystals have been a hot topic in materials chemistry, finding various applications including host frameworks for guest binding, separation membranes, ion-/proton-conducting membranes, reaction media, and optoelectronic materials. Although several excellent review articles of ionic liquid crystals have been published recently, they mainly focused on the fundamental aspects, structures, and specific properties of ionic liquid crystals, while these applications of ionic liquid crystals have not yet been discussed at one time. The aim of this feature article is to provide an overview of the applications of ionic liquid crystals in a comprehensive manner.

Liquid Crystalline Copolymers Containing Sulfonic and Light-Responsive Groups: From Molecular Design to Conductivity

In the search for novel smart multifunctional liquid crystalline materials, we report the synthesis, thermal and structural characterisation, and the conductivity, of a set of new block and statistical copolymers, containing light-responsive mesogenic groups (MeOAzB), polar sulfonic acids (AMPS), and methyl(methacrylate) groups (MMA). By using a cascade of reversible addition-fragmentation chain polymerisations, RAFT, we have tailored different side-chain polymeric structures by controlling monomer composition (MeOAzB/AMPS/MMA) and configuration. We have yielded simultaneous liquid crystalline behaviour and appreciable conductivity in polymers with low concentrations of polar acid groups, by the formation of smectic phases in narrow aggregates. The light-responsiveness of the polymers, via reversible trans-to-cis photoisomerization of azobenzene groups, and the local activation of conductivity at relatively low temperatures, opens the possibility to prepare polymer electrolytes for energy conversion and storage, whose conductivity could be controlled and optimised by external stimuli, including light irradiation.

Progress on highly proton-conductive polymer thin films with organized structure and molecularly oriented structure

Several current topics are introduced in this review, with particular attention to highly proton-conductive polymer thin films with organized structure and molecularly oriented structure. Organized structure and molecularly oriented structure are anticipated as more promising approaches than conventional less-molecular-ordered structure to elucidate mechanisms of high proton conduction and control proton conduction. This review introduces related polymer materials and molecular design using lyotropic liquid crystals and hydrogen bond networks for high proton conduction. It also outlines the use of substrate surfaces and external fields, such as pressure and centrifugal force, for organizing structures and molecularly oriented structures.

Amphiphilic Cyclodextrin-Based Liquid Crystals for Proton Conduction

Novel cyclodextrin (CD)-based amphiphilic poly(carboxylic acid)s that self-assemble into highly ordered smectic liquid crystalline mesophases were investigated as a novel class of protonic conductors. These structurally well-defined materials are synthesized from nontoxic and environment-friendly CDs, which possess a unique face-to-face pseudosymmetry. By taking advantage of such geometry, a series of flexible tetraethylene glycol groups terminated with a carboxylic acid functionality were introduced to the CD's secondary face, resulting in the formation of long-range 2D hydrogen-bond networks in the smectic mesophases over a wide temperature window. This new material was found to exhibit impressive proton conductivities in solid states, up to 1.4 × 10^-2 S cm^-1 at 70 °C and 95% humidity. This constitutes the first report of amphiphilic CD-based liquid crystals applied as proton conductive materials.

Poly (N-vinyl imidazole) gel-filled membrane adsorbers for highly efficient removal of dyes from water

Energy-efficient and time-saving process for recovery of hazardous dyes from wastewater is highly desired in dyeing industry. In this work, poly(N-vinyl imidazole) (PVI) gel-filled membrane adsorbers were developed for highly efficient recovery of dyes through adsorption filtration. The membrane adsorbers were fabricated via dip-coating of Nylon macroporous membranes in PVI solutions followed by quaternization crosslinking with p-xylylene dichloride (XDC). Physicochemical characterizations indicated that PVI gel was successfully filled and fixed inside the Nylon matrix. In optimized conditions. The treating capacity of membrane adsorbers to typical dye sunset yellow (25 ppm of the feed concentration) reached up to 197 mg/g with the removal ratio >99%. Both the treating capacity and the removal ratio were kept steady even when the permeation flux was as high as 1000 L/m² h. The membrane adsorbers developed in this work were able to not only remove anionic dyes from water, but also separate anionic dyes from cationic ones. The zeta potential and adsorption tests showed that the electrostatic interaction between PVI gel and dye molecules was responsible for the high removal efficiencies to anionic dyes. The membrane adsorbers can be regenerated effectively with NaOH solution and demonstrated good stability in both acidic and alkaline conditions.

Nanoporous Polymers Based on Liquid Crystals

In the present review, we discuss recent advances in the field of nanoporous networks based on polymerisable liquid crystals. The field has matured in the last decade, yielding polymers having 1D, 2D, and 3D channels with pore sizes on the nanometer scale. Next to the current progress, some of the future challenges are presented, with the integration of nanoporous membranes in functional devices considered as the biggest challenge.

Proton conductive ionic liquid crystalline poly(ethyleneimine) polymers functionalized with oxadiazole

Two novel series of ionic liquid crystal polymers that display proton conductive properties are presented here.