Strategy for Fabricating Multiple-Shape-Memory Polymeric Materials via the Multilayer Assembly of Co-Continuous Blends

Excellent mechanical and electromagnetic interference shielding properties of polylactic acid/polycaprolactone/multiwalled carbon nanotube composites enabled by a multilayer structure design

In this work, a special multilayer structure consisting of polylactic acid (PLA) and a co-continuous PLA/polycaprolactone (PCL)/multiwalled carbon nanotube (MWCNT) (ALM) composite with a double-percolated conductive network was fabricated via layer-assembly coextrusion. It was revealed that PLA domains located at the layer interface could serve as rivets properly linking adjacent layers. Such a nacre-like structure with alternately stacked rigid PLA and flexible ALM increased the fracture strain to 354.4%, nearly quadruple that of the PLA/PCL/MWCNT conventional blending composite with the same composition, while maintaining an excellent strength above 46.0 MPa. In addition, the multilayer composites showed a special frequency-selective electromagnetic interference (EMI) shielding performance, with tunable shielding peak positions controlled by the layer number. Their maximum EMI shielding effectiveness almost contributed by absorption loss could reach 49.8 dB, which originated from two aspects: one was the high electrical conductivity offered by the double-percolated distribution of MWCNTs, and the other was the multiple wave attenuation effect that occurred at the interfaces between PLA and ALM layers and the blend interfaces in ALM layers. This effort paves a new way for developing composites with outstanding mechanical and EMI shielding properties that can be extended to other polymeric composite systems.

Self-healing polymers for surface scratch regeneration

Recently, there has been a significant increase in academic and industrial interest in self-healing polymers (SHPs) due to their remarkable ability to regenerate scratched surfaces and materials of astronomical significance. Scientists have been inspired by the magical repairing mechanism of the living world. They transformed the fiction of self-healing into reality by designing engrossing polymeric materials that could self-repair mechanical abrasions repeatedly. As a result, the durability of the materials is remarkably improved. Thus, the idea of studying SHPs passively upholds economic and environmental sustainability. However, the critical areas of self-healing (including healing efficiency, healing mechanism, and thermo-mechanical property changes during healing) are under continuous scientific improvisation. This review highlights recent notable advances of SHPs for application in regenerating scratched surfaces with various distinctive underlying mechanisms. The primary focus of the work is aimed at discussing the impact of SHPs on scratch-healing technology. Beyond that, insights regarding scratch testing, methods of investigating polymer surfaces, wound depths, the addition of healing fillers, and the environmental conditions maintained during the healing process are reviewed thoroughly. Finally, broader future perspectives on the challenges and prospects of SHPs in healing surface scratches are discussed.

Preparation and properties of silicone rubber materials with foam/solid alternating multilayered structures

In this paper, silicone rubber materials with foam/solid alternating multilayered structures were successfully constructed by combining the two methods of multilayered hot-pressing and supercritical carbon dioxide (SCCO2) foaming. The cellular morphology and mechanical properties of the foam/solid alternating multilayered silicone rubber materials were systematically studied. The results show that the growth of the cell was restrained by the solid layer, resulting in a decrease in the cell size. In addition, the introduction of the solid layer effectively improved the mechanical properties of the microcellular silicone rubber foam. The tensile strength and compressive strength of the foam/solid alternating multilayered silicone rubber materials reached 5.39 and 1.08 MPa, which are 46.1% and 237.5% of the pure silicone rubber foam, respectively. Finite element analysis (FEA) was applied and the results indicate that the strength and proportion of the solid layer played important roles in the tensile strength of the foam/solid alternating multilayered silicone rubber materials. Moreover, the small cellular structures in silicone rubber foam can provided a high supporting counterforce during compression, meaning that the microcellular structure of silicone rubber foam improved the compressive property compared to that for the large cellular structure of silicone rubber foam.

Liquid Metal Initiator of Ring-Opening Polymerization: Self-Capsulation into Thermal/Photomoldable Powder for Multifunctional Composites

Liquid metal nanodroplets not only share similar metallic properties and nanoscale effect with solid metal nanoparticles, but also possess the additional uniqueness in nonvolatile fluidity and ambient sintering ability into continuous conductors. In most cases, liquid metal nanodroplets are encapsulated into ultrathin and fragile shells of oxides and amphiphile monolayers, and may be hindered from incorporating homogeneously into various composites through conventional processing methods. In this study, ring-opening polymerization is found to be initiated by sonicating the liquid metal EGaIn in fluidic lactones. By this in situ polymerization, EGaIn nanodroplets are encapsulated into polylactone shells with tunable thickness, which can further be dried into a solid powder. Besides high chemical stability and dispersibility in organic solvents, the powder of the EGaIn capsules combines the exceptional properties of the EGaIn droplets (e.g., photothermal effect) and the polylactone shells (e.g., biocompatibility, biodegradability, and compatibility with different polymer matrixes), being capable of being introduced into thermoplastic composites through liquid casting and thermal- or photomolding for the notch-insensitive tearing property, sintering-induced electric conductivity, and photothermal effect. Thus, the EGaIn initiator of ring-opening polymerization may start a pathway to produce stable andthermal/photomoldable powders of EGaIn capsules and their multifunctionalcomposites, applicable in biomedicines, soft electronics, and smart robots.

Robust, Reprocessable, and Reconfigurable Cellulose-Based Multiple Shape Memory Polymer Enabled by Dynamic Metal-Ligand Bonds

Smart materials with multiple shape memory capacities have gradually attracted the interest of a lot of researchers due to their potential application in textiles, smart actuators, and aerospace engineering. However, the design and sustainable synthesis of multiple shape memory polymers (SMPs) simultaneously possessing robust mechanical strength, reprocessability, and reconfigurability still remain full of challenges. Starting from a readily available biomass material cellulose, a well-defined SMP, cellulose-graft-poly(n-butyl acrylate-co-1-vinylimidazole) copolymer (Cell-g-(BA-co-VI)) was facilely synthesized by addition-fragmentation chain transfer polymerization (RAFT) and the subsequent metallosupramolecular cross-linking. Taking advantage of the dynamic bonding, i.e., the rapid reversible fragmentation and the formation of metal ion-imidazole coordination, polymer networks with highly tunable mechanical properties, excellent solid-state plasticity, and quadruple-shape memory capacity are handily attainable. Microscopically, the metal-ligand clusters have a strong tendency to phase segregate from the soft grafted copolymers indicated by atomic force microscopy (AFM), and these serve as netpoints to construct novel SMPs. This article represents our new exploration of the next-generation SMPs based on cellulose backbone where carrying with supramolecular cross-linked soft grafted copolymers. This architecture design allows achieving robust, reprocessable, and reconfigurable thermoplastic SMPs that are difficult to realize by many other methods. Integrating these properties into one system in a synergetic manner also provides a novel approach to the high value addition application of cellulose in the fabrication of advanced functional materials.

Recent advances in self-actuation and self-sensing materials: State of the art and future perspectives

The contradiction between human's strong demand of fossil fuels and their limited reserves becomes increasingly severe. Without external power input, intelligent materials responding sharply and reversibly to various external stimuli are the topic of intense research these years, especially the self-actuation and self-sensing materials. The promising family of these materials will play a significant role in energy-saving, low-cost and environment-friendly intelligent systems in the future. This review summarizes the latest advances in self-actuation and self-sensing materials. The synthetic strategies, morphologies and performance of these materials are introduced, as well as their applications in energy harvest, self-powering sensors, wearable devices, etc. Finally, tentative conclusions and assessments regarding the opportunities and challenges for the future development of these materials are presented.

Nanolayer coextrusion: An efficient and environmentally friendly micro/nanofiber fabrication technique

Researchers have developed many types of nanoscale materials with different properties. Among them, nanofibers have recently attracted increasing interest and attention due to their functional versatility and potential applications in diverse industries, including tapes, filtration, energy generation, and biomedical technologies. Nanolayer coextrusion, a novel polymer melt fiber processing technology, has gradually received attention due to its environmental friendliness, efficiency, simplicity and ability to be mass-produced. Compared with conventional techniques, nanolayer coextruded non-woven nanofibrous mats offer advantages such as a tunable fiber diameter, high porosity, high surface area to volume ratio, and the potential to manufacture composite nanofibers with different components to achieve desired structures and properties. Dozens of thermoplastic polymers have been coextruded for various applications, and the variety of polymers has gradually continued to increase. This review presents an overview of the nanolayer coextrusion technique and its promising advantages and potential applications. We discuss nanolayer coextrusion theory and the parameters (polymer and processing) that significantly affect the fiber morphology and properties. We focus on varied applications of nanolayer coextruded fibers in different fields and conclude by describing the future potential of this novel technology.

Gradient Polydopamine Coating: A Simple and General Strategy toward Multishape Memory Effects

Multi shape memory polymers (multi-SMPs) exhibit many potential applications such as aerospace, soft robotics, and biomedical devices because of their unique abilities. Although many works are done to broaden the preparations of multi-SMPs, the desire to a simple and versatile strategy as well as more complex shapes still exists. Moreover, a light-induced SMP shows more advantages than a thermal-induced one in many practical working circumstances. Herein, inspired by strong adhesion and efficient photothermal conversion of polydopamine (PDA) coating, we report a more simple and facile approach to prepare light-induced multi-SMPs by introducing a gradient PDA coating on a dual-SMP through time-controlled dipping. The photothermal converting properties with varying thicknesses of PDA under the tunable near-infrared light source are investigated. Then, light-induced multishape memory effects based on gradient PDA coatings are illustrated, where three designs of multi-SMPs - rectangle, triangle, and cross are prepared and demonstrated. Also, the evolutions of coating morphology during shape shifting are carefully studied. Finally, we present few complex designs of patterns and shapes as well as a design of potential application for the highly controllable smart devices. This strategy demonstrates a very simple and general strategy to design and prepare the light-induced multi-SMPs with complex shapes based on any thermal-responsive dual-SMPs.