Silk Fibroin Separators: A Step Toward Lithium-Ion Batteries with Enhanced Sustainability

Bioresource Polymer Composite for Energy Generation and Storage: Developments and Trends

The ever-growing demand of human society for clean and reliable energy sources spurred a substantial academic interest in exploring the potential of biological resources for developing energy generation and storage systems. As a result, alternative energy sources are needed in populous developing countries to compensate for energy deficits in an environmentally sustainable manner. This review aims to evaluate and summarize the recent progress in bio-based polymer composites (PCs) for energy generation and storage. The articulated review provides an overview of energy storage systems, e. g., supercapacitors and batteries, and discusses the future possibilities of various solar cells (SCs), using both past research progress and possible future developments as a basis for discussion. These studies examine systematic and sequential advances in different generations of SCs. Developing novel PCs that are efficient, stable, and cost-effective is of utmost importance. In addition, the current state of high-performance equipment for each of the technologies is evaluated in detail. We also discuss the prospects, future trends, and opportunities regarding using bioresources for energy generation and storage, as well as the development of low-cost and efficient PCs for SCs.

Recent Research Progress of Ionic Liquid Dissolving Silks for Biomedicine and Tissue Engineering Applications

Ionic liquids (ILs) show a bright application prospect in the field of biomedicine and energy materials due to their unique recyclable, modifiability, structure of cation and anion adjustability, as well as excellent physical and chemical properties. Dissolving silk fibroin (SF), from different species silkworm cocoons, with ILs is considered an effective new way to obtain biomaterials with highly enhanced/tailored properties, which can significantly overcome the shortcomings of traditional preparation methods, such as the cumbersome, time-consuming and the organic toxicity caused by manufacture. In this paper, the basic structure and properties of SF and the preparation methods of traditional regenerated SF solution are first introduced. Then, the dissolving mechanism and main influencing factors of ILs for SF are expounded, and the fabrication methods, material structure and properties of SF blending with natural biological protein, inorganic matter, synthetic polymer, carbon nanotube and graphene oxide in the ILs solution system are introduced. Additionally, our work summarizes the biomedicine and tissue engineering applications of silk-based materials dissolved through various ILs. Finally, according to the deficiency of ILs for dissolving SF at a high melting point and expensive cost, their further study and future development trend are prospected.

In Situ Construction of Protective Films on Zn Metal Anodes via Natural Protein Additives Enabling High-Performance Zinc Ion Batteries

The strong activity of water molecules causes a series of parasitic side reactions on Zn anodes in the aqueous electrolytes. Herein, we introduce silk fibroin (SF) as a multifunctional electrolyte additive for aqueous zinc-ion (Zn-ion) batteries. The secondary structure transformation of SF molecules from α-helices to random coils in the aqueous electrolytes allows them to break the hydrogen bond network among free water molecules and participate in Zn²⁺ ion solvation structure. The SF molecules released from the [Zn(H₂O)₄(SF)]²⁺ solvation sheath appear to be gradually adsorbed on the surface of Zn anodes and in situ form a hydrostable and self-healable protective film. This SF-based protective film not only shows strong Zn²⁺ ion affinity to promote homogeneous Zn deposition but also has good insulating behavior to suppress parasitic reactions. Benefiting from these multifunctional advantages, the cycle life of the Zn||Zn symmetric cells reaches over 1600 h in SF-containing ZnSO₄ electrolytes. In addition, by adopting a potassium vanadate cathode, the full cell shows excellent cycling stability for 1000 cycles at 3 A g^-1. The in situ construction of a protective film on the Zn anode from natural protein molecules provides an effective strategy to achieve high-performance Zn metal anodes for Zn-ion batteries.

Sustainable Natural Bio-Origin Materials for Future Flexible Devices

Flexible devices serve as important intelligent interfaces in various applications involving health monitoring, biomedical therapies, and human-machine interfacing. To address the concern of electronic waste caused by the increasing usage of electronic devices based on synthetic polymers, bio-origin materials that possess environmental benignity as well as sustainability offer new opportunities for constructing flexible electronic devices with higher safety and environmental adaptivity. Herein, the bio-source and unique molecular structures of various types of natural bio-origin materials are briefly introduced. Their properties and processing technologies are systematically summarized. Then, the recent progress of these materials for constructing emerging intelligent flexible electronic devices including energy harvesters, energy storage devices, and sensors are introduced. Furthermore, the applications of these flexible electronic devices including biomedical implants, artificial e-skin, and environmental monitoring are summarized. Finally, future challenges and prospects for developing high-performance bio-origin material-based flexible devices are discussed. This review aims to provide a comprehensive and systematic summary of the latest advances in the natural bio-origin material-based flexible devices, which is expected to offer inspirations for exploitation of green flexible electronics, bridging the gap in future human-machine-environment interactions.

Silk fibroin and sericin polymer blends for sustainable battery separators

Natural polymers are a promising alternative for reducing the environmental impact of batteries. For this reason, it is still necessary to study their behavior and implement its use in these devices, especially in separator membranes. This work reports on new separator membranes based on silk fibroin (SF) and silk sericin (SS) prepared by salt leaching method. The effect of the different SS relative content on the physiochemical properties of the membranes and on the electrochemical performance of the corresponding batteries with lithium iron phosphate (LFP) as cathodes has been reported. It is observed that the increasing of SS content leads to a decrease of the overall crystallinity of the membranes. All SF/SS membranes presented a well-defined porosity above 75% with a uniform distribution of interconnected micropores. The electrolyte uptake and the ionic conductivity are dependent on the relative SS content. The addition of 10 wt% of SS into SF membranes, induce a high ionic conductivity of 4.09 mS.cm^-1 and high lithium transference number (0.52), due to the improvement of the Li⁺ ions conduction paths within the blended structure. Charge/discharge tests performed in Lithium/C-LFP half-cells reveal a discharge capacity of 85 mAh.g^-1 at 2C after 100 cycles for batteries with a SF/SS separator, containing a 10 wt% of SS, which suggests a stabilizing effect of Sericin on discharge capacity. Further, a 50% and 35% of capacity of retention and capacity fade, respectively, is observed. The presented SF/SS membrane show high electrochemical stability, being suitable for implementation in a next generation of sustainable battery systems. This could allow the SS valorization considering that 150,000 tons of SS are abandoned each year, reducing the contamination of environmental effluents.

Air-Spun Silk-Based Micro-/Nanofibers and Thin Films for Drug Delivery

Micro-/nanofibers have shown high promise as drug delivery vehicles due to their high porosity and surface-area-to-volume ratio. The current study utilizes air-spraying, a novel fiber fabrication technique, to create silk micro-/nanofibers without the need for a high voltage power source. Air-spraying was used to create silk fibrous mats embedded with several model drugs with high efficiency. In order to compare the effect of biomaterial geometry on the release of the model drugs, silk films were also created and characterized. Fourier-transform infrared spectroscopy (FTIR), scanning electron microscope (SEM), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and a drug release study were performed on both fiber and film samples to study how the model drugs interact with the protein structure. FTIR analysis showed that while drugs could interact with the protein structure of porous silk fibers, they could not interact with the flat geometry of silk films. As a result, fibers could protect select model drugs from thermal degradation and slow their release from the fiber network with more control than the silk films. A trend was also revealed where hydrophobic drugs were better protected and had a slower release than hydrophilic drugs. The results suggest that the physical and chemical properties of drugs and protein-based biomaterials are important for creating drug delivery vehicles with tailored release profiles and that fibers provide better tunability than films do.

Gifts from Nature: Bio-Inspired Materials for Rechargeable Secondary Batteries

Materials in nature have evolved to the most efficient forms and have adapted to various environmental conditions over tens of thousands of years. Because of their versatile functionalities and environmental friendliness, numerous attempts have been made to use bio-inspired materials for industrial applications, establishing the importance of biomimetics. Biomimetics have become pivotal to the search for technological breakthroughs in the area of rechargeable secondary batteries. Here, the characteristics of bio-inspired materials that are useful for secondary batteries as well as their benefits for application as the main components of batteries (e.g., electrodes, separators, and binders) are discussed. The use of bio-inspired materials for the synthesis of nanomaterials with complex structures, low-cost electrode materials prepared from biomass, and biomolecular organic electrodes for lithium-ion batteries are also introduced. In addition, nature-derived separators and binders are discussed, including their effects on enhancing battery performance and safety. Recent developments toward next-generation secondary batteries including sodium-ion batteries, zinc-ion batteries, and flexible batteries are also mentioned to understand the feasibility of using bio-inspired materials in these new battery systems. Finally, current research trends are covered and future directions are proposed to provide important insights into scientific and practical issues in the development of biomimetics technologies for secondary batteries.

One-Step Dip-Coating-Fabricated Core-Shell Silk Fibroin Rice Paper Fibrous Scaffolds for 3D Tumor Spheroid Formation

Bioscaffolds are important substrates for supporting three-dimensional (3D) cell cultures. Silk fibroin (SF) is an attractive biomaterial in tissue engineering because of its good biocompatibility and mechanical properties. Electrospinning is one of the most often used approaches to fabricate SF fibrous scaffolds; yet, this technique still faces many challenges, such as low yield, residual organic solvents, limited extensibility of fibers, and a lack of spatial control over pore size. To circumvent these limitations, a core-shell SF on rice paper (SF@RP) fibrous scaffold was fabricated using a mild one-step dip-coating method. The cellulose fiber matrix of RP is the physical basis of the 3D scaffold, whereas the SF coating on the cellulose fiber controls the adhesion/spreading of the cells. The results indicated that by tuning the secondary structure of SF on the surface of a SF@RP scaffold, the cell behavior on SF@RP could be tuned. Tumor spheroids can be formed on SF@RP scaffolds with a dominant random secondary structure, in contrast to cells adhering and spreading on SF@RP scaffolds with a higher ratio of β-sheet secondary structures. Direct culturing of breast cancer MDA-MB-231 and MCF-7, lung cancer A549, prostate cancer DU145, and liver cancer HepG2 cells could spontaneously lead to corresponding tumor spheroids on SF@RP. In addition, the physiological characteristics of HepG2 tumor spheroids were investigated, and the results showed that compared with HepG2 monolayer cells, CYP3A4, CYP1A1, and albumin gene expression levels in HepG2 cell spheres formed on SF@RP scaffolds were significantly higher. Moreover, these spheroids showed higher drug resistance. In summary, these SF@RP scaffolds prepared by the dip-coating method are biocompatible substrates for cell culture, especially for tumor cell spheroid formation.

Immunizing lithium metal anodes against dendrite growth using protein molecules to achieve high energy batteries

The practical applications of lithium metal anodes in high-energy-density lithium metal batteries have been hindered by their formation and growth of lithium dendrites. Herein, we discover that certain protein could efficiently prevent and eliminate the growth of wispy lithium dendrites, leading to long cycle life and high Coulombic efficiency of lithium metal anodes. We contend that the protein molecules function as a “self-defense” agent, mitigating the formation of lithium embryos, thus mimicking natural, pathological immunization mechanisms. When added into the electrolyte, protein molecules are automatically adsorbed on the surface of lithium metal anodes, particularly on the tips of lithium buds, through spatial conformation and secondary structure transformation from α-helix to β-sheets. This effectively changes the electric field distribution around the tips of lithium buds and results in homogeneous plating and stripping of lithium metal anodes. Furthermore, we develop a slow sustained-release strategy to overcome the limited dispersibility of protein in the ether-based electrolyte and achieve a remarkably enhanced cycling performance of more than 2000 cycles for lithium metal batteries.

The practical application of lithium metal anodes in high-energy-density lithium metal batteries is hindered by the formation and growth of lithium dendrites. Here, authors report fibroin protein as an electrolyte additive to prevent and eliminate the growth of wispy lithium dendrites.

The State of the Art of Energy Harvesting and Storage in Silk Fibroin-Based Wearable and Implantable Devices

The energy autonomy of self-powered wearable electronics depends on the adequate development of new technologies for energy harvesting and energy storage devices based on textile fibers to facilitate the integration with truly flexible and wearable devices. Silk fiber-based systems are attractive for the design of biomedical devices, lithium-ion batteries and flexible supercapacitors, due to their nitrogen-rich structure (for preparation of hierarchical carbon-based structures), and available surface for chemical modification reinforcing electroactive properties for use in batteries and supercapacitors. Herein, this paper reviews recent advances on silk fiber-based systems for harvesting and the storage of energy and the corresponding strategies to reinforce the physical and chemical properties of the resulting composites applied as electrodes and battery separators.

Protein and Polysaccharide-Based Fiber Materials Generated from Ionic Liquids: A Review

Natural biomacromolecules such as structural proteins and polysaccharides are composed of the basic building blocks of life: amino acids and carbohydrates. Understanding their molecular structure, self-assembly and interaction in solvents such as ionic liquids (ILs) is critical for unleashing a flora of new materials, revolutionizing the way we fabricate multi-structural and multi-functional systems with tunable physicochemical properties. Ionic liquids are superior to organic solvents because they do not produce unwanted by-products and are considered green substitutes because of their reusability. In addition, they will significantly improve the miscibility of biopolymers with other materials while maintaining the mechanical properties of the biopolymer in the final product. Understanding and controlling the physicochemical properties of biopolymers in ionic liquids matrices will be crucial for progress leading to the ability to fabricate robust multi-level structural 1D fiber materials. It will also help to predict the relationship between fiber conformation and protein secondary structures or carbohydrate crystallinity, thus creating potential applications for cell growth signaling, ionic conductivity, liquid diffusion and thermal conductivity, and several applications in biomedicine and environmental science. This will also enable the regeneration of biopolymer composite fiber materials with useful functionalities and customizable options critical for additive manufacturing. The specific capabilities of these fiber materials have been shown to vary based on their fabrication methods including electrospinning and post-treatments. This review serves to provide basic knowledge of these commonly utilized protein and polysaccharide biopolymers and their fiber fabrication methods from various ionic liquids, as well as the effect of post-treatments on these fiber materials and their applications in biomedical and pharmaceutical research, wound healing, environmental filters and sustainable and green chemistry research.

The Impact of Composition and Morphology on Ionic Conductivity of Silk/Cellulose Bio-Composites Fabricated from Ionic Liquid and Varying Percentages of Coagulation Agents

Blended biocomposites created from the electrostatic and hydrophobic interactions between polysaccharides and structural proteins exhibit useful and unique properties. However, engineering these biopolymers into applicable forms is challenging due to the coupling of the material’s physicochemical properties to its morphology, and the undertaking that comes with controlling this. In this particular study, numerous properties of the Bombyx mori silk and microcrystalline cellulose biocomposites blended using ionic liquid and regenerated with various coagulation agents were investigated. Specifically, the relationship between the composition of polysaccharide-protein bio-electrolyte membranes and the resulting morphology and ionic conductivity is explored using numerous characterization techniques, including scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), thermal gravimetric analysis (TGA), differential scanning calorimetry (DSC), X-ray scattering, atomic force microscopy (AFM) based nanoindentation, and dielectric relaxation spectroscopy (DRS). The results revealed that when silk is the dominating component in the biocomposite, the ionic conductivity is higher, which also correlates with higher β-sheet content. However, when cellulose becomes the dominating component in the biocomposite, this relationship is not observed; instead, cellulose semicrystallinity and mechanical properties dominate the ionic conduction.

A Protein-Based, Water-Insoluble, and Bendable Polymer with Ionic Conductivity: A Roadmap for Flexible and Green Electronics

Proteins present an ecofriendly alternative to many of the synthetic components currently used in electronics. They can therefore in combination with flexibility and electroactivity uncover a range of new opportunities in the field of flexible and green electronics. In this study, silk-based ionic conductors are turned into stable thin films by embedding them with 2D nanoclay platelets. More specifically, this material is utilized to develop a flexible and ecofriendly motion-sensitive touchscreen device. The display-like sensor can readily transmit light, is easy to recycle and can monitor the motion of almost any part of the human body. It also displays a significantly lower sheet resistance during bending and stretching regimes than the values typically reported for conventional metallic-based conductors, and remains fully operational after mechanical endurance testing. Moreover, it can operate at high frequencies in the kilohertz (kHz) range under both normal and bending modes. Notably, our new technology is available through a simple one-step manufacturing technique and can therefore easily be extended to large-scale fabrication of electronic devices.

Ionic Liquid-Assisted Synthesis of Mesoporous Silk Fibroin/Silica Hybrids for Biomedical Applications

New mesoporous silk fibroin (SF)/silica hybrids were processed via a one-pot soft and energy-efficient sol-gel chemistry and self-assembly from a silica precursor, an acidic or basic catalyst, and the ionic liquid 1-butyl-3-methylimidazolium chloride, acting as both solvent and mesoporosity-inducer. The as-prepared materials were obtained as slightly transparent-opaque, amorphous monoliths, easily transformed into powders, and stable up to ca. 300 °C. Structural data suggest the formation of a hexagonal mesostructure with low range order and apparent surface areas, pore volumes, and pore radii of 205-263 m2 g-1, 0.16-0.19 cm3 g-1, and 1.2-1.6 nm, respectively. In all samples, the dominating conformation of the SF chains is the β-sheet. Cytotoxicity/bioactivity resazurin assays and fluorescence microscopy demonstrate the high viability of MC3T3 pre-osteoblasts to indirect (≥99 ± 9%) and direct (78 ± 2 to 99 ± 13%) contact with the SF/silica materials. Considering their properties and further improvements, these systems are promising candidates to be explored in bone tissue engineering. They also offer excellent prospects as electrolytes for solid-state electrochemical devices, in particular for fuel cells.