Controlled Insertion of Planar Defect in Inverse Opals for Anticounterfeiting Applications

Structural Color Inks Containing Photonic Microbeads for Direct Writing

Printing structurally colored patterns is of great importance for providing customized graphics for various purposes. Although a direct writing technique has been developed, the use of colloidal dispersions as photonic inks requires delicate printing conditions and restricts the mechanical and optical properties of printed patterns. In this work, we produce elastic photonic microbeads through scalable bulk emulsification and formulate photonic inks containing microbeads for direct writing. To produce the microbeads, a photocurable colloidal dispersion is emulsified into a highly concentrated sucrose solution via vortexing, which results in spherical emulsion droplets with a relatively narrow size distribution. The microbeads are produced by photopolymerization and are then suspended in urethane acrylate resin at volume fractions of 0.35-0.45. The photonic inks retain high color saturation of the microbeads and offer enhanced printability and dimensional control on various target substrates including fabrics, papers, and even skins. Importantly, the printed graphics show high mechanical stability as the elastic microbeads are embedded in the polyurethane matrix. Moreover, the colors show a wide viewing angle and low-angle dependency due to the optical isotropy of individual microbeads and light refraction at the air-matrix interface. We postulate that this versatile direct writing technique is potentially useful for structural color coating and printing on the surfaces of arbitrary 3D objects.

Photon Management Enabled by Opal and Inverse Opal Photonic Crystals: from Photocatalysis to Photoluminescence Regulation

Light is a promising renewable energy source and can be converted into heat, electricity, and chemical energy. However, the efficiency of light-energy conversion is largely hindered by limited light-absorption coefficients and the low quantum yield of current-generation materials. Photonic crystals (PCs) can adjust the propagation and distribution of photons because of their unique periodic structures, which offers a compelling platform for photon management. The periodicity of materials with an alternating refractive index can be used to manipulate the dispersion of photons to generate the photonic bandgap (PBG), in which light is reflected. The slow photon effect, i. e., photon propagation at a reduced group velocity near the edges of the PBG, is widely regarded as another valuable optical property for manipulating light. Furthermore, multiple light scattering can increase the optical path, which is a vital optical property for PCs. Recently, the light reflected by PBG, the slow photon effect, and multiple light scattering have been exploited to improve light utilization efficiency in photoelectrochemistry, materials chemistry, and biomedicine to enhance light-energy conversion efficiency. In this review, the fabrication of opal or inverse opal PCs and the theory for improving the light utilization efficiency of photocatalysis, solar cells, and photoluminescence regulation are discussed. We envision photon management of opal or inverse opal PCs may provide a promising avenue for light-assisted applications to improve light-energy-conversion efficiency.

Robust and Reliable Fabrication of Gelatin Films Containing Micropatterned Opal Structures via Evaporative Deposition and Thermal Gelation

Biopolymeric hydrogel materials containing tunable optical properties such as micropatterned artificial opal structures hold significant potential in various applications. Despite recent advances in fabrication techniques, simple, reliable, and tunable production of stimuli-responsive micropatterned opal hydrogels under mild conditions remains challenging. We report a simple micromolding-based evaporative deposition-thermal gelation technique for gelatin films that capture uniform opal micropatterns, aided by a potent aminopolysaccharide chitosan (CS) that provides binding affinity and structural stability. Our results show reliable, tunable, and high-fidelity fabrication of gelatin hydrogel films containing CS-opal micropatterns, while the as-prepared films show responsiveness to pH, ionic strength, and water content indicating a robust nature. Uniform CS-opal microparticles can also be readily prepared via removal of the gelatin through various simple routes, illustrating the crucial roles of CS and gelatin. We envision that this robust, reliable, and simple evaporative deposition-thermal gelation technique can be readily extended to prepare responsive biopolymeric materials for various applications.

Magnetic Field-Assisted Fast Assembly of Microgel Colloidal Crystals

Compared with the colloidal crystals (CCs) of hard spheres, large-scale, high-quality CCs of soft microgel spheres are easier to be assembled because they are more tolerant to defects. However, to assemble microgel CCs, a microgel dispersion should first be concentrated and then allowed to crystallize, which is tedious and time-consuming. Herein, we demonstrated that a magnetic poly(N-isopropylacrylamide) (PNIPAM) microgel with an Fe₃O₄ core and a PNIPAM shell can be assembled into CCs quickly by simply applying an external magnetic field to the diluted microgel dispersions. The resulting CCs are highly ordered as revealed by their iridescent color, laser diffraction pattern, and confocal characterization. They display a sharp Bragg peak on their reflection spectra, which shifts to lower wavelength when heated because of the thermosensitivity of the PNIPAM shell. The magnetic assembly is not only simple and fast but also allows control of the CC structure in both horizontal and vertical directions. Using spatially varying magnetic fields, patterned microgel CCs were facilely assembled. More importantly, magnetic microgel spheres with different sizes can be assembled in a layer-by-layer manner by adding them sequentially, and the thickness of each layer can be simply controlled by the amount of spheres added.

Control of Liquid Crystal Microarray Optical Signals Using a Microspectral Mode Based on Photonic Crystal Structures

Herein, a novel liquid crystal microarray (LCM) film with optical regulation ability is first constructed by combining liquid crystals (LC) and the highly ordered microporous structure of inverse opal photonic crystals (IOPhCs). The LCM films are fabricated by infiltrating LC molecules into the LC polymer with the structure of IOPhCs, and their properties are very different from those without the LC. Interestingly, the optical property of LCM films can be controlled by changing the orientation of LC molecules, which varies with the interfacial force. In combination with polarization images, spectral reflection peak, circular dichroism spectra, potential difference, and fluorescence images of LCM films, the mechanism of this change is investigated. It is found that the exposed basic group of single-stranded DNA is the key to the change of the optical property of LC microarrays. Meanwhile, the optical signals of LC microarrays based on the PhCs provide a novel LC signal mode for an LC sensing system (microspectral signal mode), and it can be recorded by a fiber-optic spectrometer, which is a great improvement on LC sensing signals. Therefore, the LC microarray sensing signal can be used for accurate analysis of targets by the change of the reflection peak intensity of PhCs. When the LC molecules are induced by different aptamers, the LC microarray sensing interface can be further used for the determination of different targets, such as cocaine and Hg²⁺. The research on LCM films is of significant value for the development of LC sensing technology and also shows great application prospects in biochemical sensing fields.

Lotus Seedpod Inspiration: Particle-Nested Double-Inverse Opal Films with Fast and Reversible Structural Color Switching for Information Security

The integration of novel structures into colloidal crystals provides the possibility of constructing stimuli-responsive photonic materials. However, in most opal and inverse opal structures, replacing the interior air with an infiltrated liquid will cause partial refractive index matching, resulting in the reduction or even disappearance of the photonic band gap. Herein, inspired by the lotus seedpod, an innovative particle-nested double-inverse opal film with fast and reversible structural color switching (≈1 s) is first fabricated by introducing polystyrene (PS) spheres into an inverted opal backbone. Importantly, refractive index matching can be effectively avoided due to the existence of internal PS spheres, and optical switching from diffusive to photonic behavior is achieved by a liquid with low surface tension for the response. Furthermore, a reversible ethanol stimuli-response bilayer double-inverse opal film with multistate switching for information encryption is proposed by combining optical scattering and diffraction. The scattered light from the top layer caused by the randomly distributed and weakly scattering PS spheres within the pores makes the pattern at the bottom invisible. Simultaneously, the display and discoloration of the pattern can be realized instantaneously by ethanol response. Thus, this new preparation strategy exhibits great potential in the security fields.

Controlled diffusion of nanoparticles by viscosity gradient for photonic crystal with dual photonic band gaps

Coalescence of droplets containing nanoparticles has been paid much attention regarding fabrication of functional photonic crystal (PC) patterns. However, most studies focus on the coalescence of droplets containing the same nanoparticles. Currently, an active challenge comes from the coalescence of droplets containing different nanoparticles due to the spontaneous mutual diffusion of different nanoparticles between coalescing miscible droplets driven by the released Gibbs free energy. Such diffusion breaks the self-assembly of nanoparticles into promising PCs with dual photonic band gaps (PBGs). In this work, a viscosity gradient was induced in coalescing droplets containing different nanoparticles to control the diffusion of nanoparticles and impede the diffusion across the coalescing interface. Nanoparticles diffused along the viscosity gradient to droplet surfaces and self-assembled into a period structure which enhanced the interaction of nanoparticles and contributed to impeding the random diffusion between droplets. At the same time, the high viscosity at the coalescing interface slowed down the horizontal movement of nanoparticles further and consequently the diffusion of nanoparticles across the interface was impeded. By use of such controlled diffusion of nanoparticles in the viscosity gradient, PCs with PBGs were achieved. These results demonstrate the controlled diffusion of nanoparticles during the coalescence of miscible droplets to facilely fabricate PCs with PBGs in the absence of an existing external field.

Bilayer Heterostructure Photonic Crystal Composed of Hollow Silica and Silica Sphere Arrays for Information Encryption

Utilizing photonic crystals to fabricate information encryption materials has attracted widespread interest due to their tunable optical properties and responsiveness to external stimuli. In most of the previously reported systems, the information is hidden at a specific angle and the angle-dependent invisibility is a limitation. Meanwhile, poor structural stability is still a key issue that needs to be solved for potential applications. In this paper, a bilayer heterostructure photonic crystal containing ordered hollow silica inverse opal arrays, amorphous silica opal arrays, and poly(vinyl alcohol) (adhesive) is successfully constructed. It makes the information highly invisible at any angle and also achieves information encryption. With this strategy, the information can be hidden by the noniridescent structural color derived from the strong scattering effect of light from the top layer of amorphous silica sphere arrays. After wiping with ethanol or a refractive-index-matching solvent, the scattering effect vanishes and the amorphous silica sphere arrays become transparent. The reflected light of the bottom layer caused by the increasing refractive index contrast between the inside and outside of the hollow silica spheres could rapidly reveal the hidden information. The bilayer photonic crystal exhibits robust structural stability, and the hiding/revealing process is completely reversible, which shows great potential applications in steganography and information encryption.

Responsive Porous Microcarriers With Controllable Oxygen Delivery for Wound Healing

Microcarriers with oxygen-delivering capacity have attracted increasing interest in the field of tissue regeneration. Here, a kind of molybdenum disulfide quantum dots (MoS₂ QDs) integrated responsive porous microcarriers with controllable oxygen-delivering ability for wound healing is presented. The specific gelatin methacryloyl (GelMa) porous microcarriers are derived from inverse opal microparticles which can be decorated with the oxygen-carrying protein hemoglobin. Because of their characteristic porous structure, interconnected nanochannels, and excellent biocompatibility, the resultant microcarriers could carry oxygen extensively and provide support for tissue repair physically and biologically. Besides, since the typical photothermal effect of 2D materials and their derived 2D QDs, the inverse opal particles integrated with MoS₂ QDs are imparted with photo-responsive capacity, which makes them able to release oxygen photo-controllably. It is demonstrated that the designed microcarriers can promote the repair of abdominal wall defects effectively with their multifunctional features. These remarkable properties point to the potential value of the microcarriers in wound healing and tissue engineering.

Designing Structural-Color Patterns Composed of Colloidal Arrays

Structural coloration provides a great potential for various applications due to unique optical properties distinguished from conventional pigment colors. Structural colors are nonfading, iridescent, and tunable, which is difficult to achieve with pigments. In addition, structural color is potentially less toxic than pigments. However, it is challenging to develop structural colors because elaborate nanostructures are a prerequisite for the coloration. Furthermore, it is highly suggested the nanostructures be patterned at various length scales on a large area to provide practical formats. There have been intensive studies to develop pragmatic methods for producing structural-color patterns in a controlled manner using either colloidal crystals or glasses. This article reviews the current state of the art in the structural-color patterning based on the colloidal arrays. We first discuss common and different features between colloidal crystals and glasses. We then categorize colloidal arrays into six distinct structures of 3D opals, inverse opals, non-close-packed arrays, 2D colloidal crystals, 1D colloidal strings, and 3D amorphous arrays and study various methods to make them patterned from recent key contributions. Finally, we outline the current challenges and future perspectives of the structural-color patterns.

The Control of Colloidal Grain Boundaries through Evaporative Vertical Self-Assembly

Self-assembly continuously gains attention as an excellent method to create novel nanoscale structures with a wide range of applications in photonics, optoelectronics, biomedical engineering, and heat transfer applications. However, self-assembly is governed by a diversity of complex interparticle forces that cause fabricating defectless large scale (>1 cm) colloidal crystals, or opals, to be a daunting challenge. Despite numerous efforts to find an optimal method that offers the perfect colloidal crystal by minimizing defects, it has been difficult to provide physical interpretations that govern the development of defects such as grain boundaries. This study reports the control over grain domains and intentional defect characteristics that develop during evaporative vertical deposition. The degree of particle crystallinity and evaporation conditions is shown to govern the grain domain characteristics, such as shapes and sizes. In particular, the grains fabricated with 300 and 600 nm sphere diameters can be tuned into single-column structures exceeding ≈1 mm by elevating heating temperature up to 93 °C. The understanding of self-assembly physics presented in this work will enable the fabrication of novel self-assembled structures with high periodicity and offer fundamental groundworks for developing large-scale crack-free structures.